summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-imx.c
AgeCommit message (Collapse)AuthorFilesLines
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds1-6/+35
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-08-26Merge remote-tracking branch 'spi/for-5.15' into spi-nextMark Brown1-8/+13
2021-08-12Merge tag 'imx-ecspi-5.15' of ↵Arnd Bergmann1-6/+35
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX eCSPI errata handling for 5.15: It includes all required changes for handling i.MX6/7 eCSPI errata ERR009165, which causes FIFO transfer to be sent twice in DMA mode. Both SPI and DMA maintainers agree to merge it through arm-soc tree. * tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dmaengine: imx-sdma: add terminated list for freed descriptor in worker dmaengine: imx-sdma: add uart rom script dma: imx-sdma: add i.mx6ul compatible name dmaengine: imx-sdma: remove ERR009165 on i.mx6ul spi: imx: remove ERR009165 workaround on i.mx6ul spi: imx: fix ERR009165 dmaengine: imx-sdma: add mcu_2_ecspi script dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script dmaengine: imx-sdma: remove duplicated sdma_load_context Revert "dmaengine: imx-sdma: refine to load context only once" Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-03spi: imx: Implement support for CS_WORDUwe Kleine-König1-0/+10
This only works when the native chipselect is in use. On a board with a Ti ADS7950 8 channel ADC. This patch reduces the time to read out all channels once from 280 us to 20 us. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210727124226.5571-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-28spi: imx: mx51-ecspi: Fix CONFIGREG delay commentMarek Vasut1-1/+1
For (2 * 1000000) / min_speed_hz < 10 to be true in naturals with zero, the min_speed_hz must be above 200000 (i.e. 200001 rounds down to 9, so the condition triggers). Update the comment. No functional change. Fixes: 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210727160428.7673-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-26spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculationMarek Vasut1-1/+15
The spi_imx->spi_bus_clk may be uninitialized and thus also zero in mx51_ecspi_prepare_message(), which would lead to division by zero in kernel. Since bitbang .setup_transfer callback which initializes the spi_imx->spi_bus_clk is called after bitbang prepare_message callback, iterate over all the transfers in spi_message, find the one with lowest bus frequency, and use that bus frequency for the delay calculation. Note that it is not possible to move this CONFIGREG delay back into the .setup_transfer callback, because that is invoked too late, after the GPIO chipselects were already configured. Fixes: 135cbd378eab ("spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210726100102.5188-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-23spi: imx: remove ERR009165 workaround on i.mx6ulRobin Gong1-3/+36
ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and i.mx8m/8mm still need this errata. Please refer to nxp official errata document from https://www.nxp.com/ . For removing workaround on those chips. Add new i.mx6ul type. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23spi: imx: fix ERR009165Robin Gong1-7/+3
Change to XCH mode even in dma mode, please refer to the below errata: https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-19spi: imx: Simplify logic in spi_imx_push()Uwe Kleine-König1-8/+3
For each usage of fifo_words it is clear if ->dynamic_burst is true or not. This can be used to simplify the function a bit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210716173927.2050620-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-07spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delayMarek Vasut1-19/+19
Since 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook."), the MX51_ECSPI_CONFIG write no longer happens in prepare_transfer hook, but rather in prepare_message hook, however the MX51_ECSPI_CONFIG delay is still left in prepare_transfer hook and thus has no effect. This leads to low bus frequency operation problems described in 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") again. Move the MX51_ECSPI_CONFIG write delay into the prepare_message hook as well, thus reinstating the low bus frequency fix. Fixes: 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210703022300.296114-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-30Merge tag 'sound-5.13-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No surprises in this development cycle, and most of work is about the fixes and the improvements of the existing code, while a new LED control layer and a few new drivers have been introduced. Here are some highlights: Core: - A common mute-LED framework was introduced. It is used by HD-audio for now, more adaption will follow later. The former "Mic Mute-LED Mode" mixer control has been replaced with the corresponding sysfs now. - User-control management was changed to count consumed bytes instead of capping by number of elements; this will allow more controls in the normal usage pattern while avoiding the possible memory exhaustion DoS ASoC: - Continued refactoring and cleanups in ASoC core and generic card drivers - Wide range of small cppcheck and warning fixes - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715 USB-audio: - Continued improvements and fixes of the implicit feedback mode, including better support for Pioneer and Roland/BOSS devices HD-audio: - Default back to non-buffer preallocation on x86 - Cirrus codec improvements, more quirks for Realtek codecs Others: - New virtio sound driver - FireWire Bebob updates" * tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits) ALSA: hda/conexant: Re-order CX5066 quirk table entries ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices ALSA: hda/realtek: Re-order ALC662 quirk table entries ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries ALSA: hda/realtek: Re-order ALC269 HP quirk table entries ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries ALSA: usb-audio: Remove redundant assignment to len ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx ALSA: virtio: fix kernel-doc ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB ALSA: sb: Fix two use after free in snd_sb_qsound_build ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer ...
2021-04-09spi: imx: add a check for speed_hz before calculating the clockClark Wang1-16/+21
When some drivers use spi to send data, spi_transfer->speed_hz is not assigned. If spidev->max_speed_hz is not assigned as well, it will cause an error in configuring the clock. Add a check for these two values before configuring the clock. An error will be returned when they are not assigned. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20210408103347.244313-2-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-25spi: imx: Use of_device_get_match_data() helperTian Tao1-3/+2
Use the of_device_get_match_data() helper instead of open coding. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1616385476-53327-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-17spi: imx: Improve driver descriptionFabio Estevam1-1/+1
"SPI Controller driver" is a too generic description. Make it i.MX specific instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210316180922.239805-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-19spi: imx: Don't print error on -EPROBEDEFERGuido Günther1-1/+1
This avoids [ 0.962538] spi_imx 30820000.spi: bitbang start failed with -517 durig driver probe. Fixes: 8197f489f4c4 ("spi: imx: Fix failure path leak on GPIO request error correctly") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/0f51ab42e7c7a3452f2f8652794d81584303ea0d.1610987414.git.agx@sigxcpu.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-27Merge branch 'for-5.10' of ↵Mark Brown1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.11
2020-11-24spi: imx: fix the unbalanced spi runtime pm managementClark Wang1-0/+1
If set active without increase the usage count of pm, the dont use autosuspend function will call the suspend callback to close the two clocks of spi because the usage count is reduced to -1. This will cause the warning dump below when the defer-probe occurs. [ 129.379701] ecspi2_root_clk already disabled [ 129.384005] WARNING: CPU: 1 PID: 33 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0 So add the get noresume function before set active. Fixes: 43b6bf406cd0 spi: imx: fix runtime pm support for !CONFIG_PM Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20201124085247.18025-1-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-17spi: imx: Remove unused .id_table supportFabio Estevam1-30/+1
Since 5.10-rc1 i.MX is a devicetree-only platform and the existing .id_table support in this driver was only useful for old non-devicetree platforms. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201116202606.29888-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-10spi: imx: fix reference leak in two imx operationsZhang Qilong1-0/+2
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak in callers(spi_imx_prepare_message and spi_imx_remove), so we should fix it. Fixes: 525c9e5a32bd7 ("spi: imx: enable runtime pm support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201102145835.4765-1-zhangqilong3@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-29Merge tag 'v5.10-rc1' into spi-5.10Mark Brown1-1/+4
Linux 5.10-rc1
2020-10-26Merge existing fixes from spi/for-5.10Mark Brown1-8/+15
2020-10-23spi: imx: fix runtime pm support for !CONFIG_PMSascha Hauer1-8/+15
525c9e5a32bd introduced pm_runtime support for the i.MX SPI driver. With this pm_runtime is used to bring up the clocks initially. When CONFIG_PM is disabled the clocks are no longer enabled and the driver doesn't work anymore. Fix this by enabling the clocks in the probe function and telling pm_runtime that the device is active using pm_runtime_set_active(). Fixes: 525c9e5a32bd spi: imx: enable runtime pm support Tested-by: Christian Eggers <ceggers@arri.de> [tested for !CONFIG_PM only] Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20201021104513.21560-1-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-09Merge remote-tracking branch 'spi/for-5.10' into spi-nextMark Brown1-3/+3
2020-10-05spi: imx: Fix freeing of DMA channels if spi_bitbang_start() failsMarek Vasut1-1/+4
If the SPI controller has has_dmamode = true and spi_bitbang_start() fails in spi_imx_probe(), then the driver must release the DMA channels acquired in spi_imx_sdma_init() by calling spi_imx_sdma_exit() in the fail path. Fixes: f62caccd12c1 ("spi: spi-imx: add DMA support") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Robin Gong <b38343@freescale.com> Cc: Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20201005132229.513119-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-23spi: spi-imx: spi_imx_transfer(): add support for effective_speed_hzMarc Kleine-Budde1-0/+2
This patch implementes the reporting of the effectivly used speed_hz for the transfer by setting tfr->effective_speed_hz. See the following patch, which adds this feature to the SPI core for more information: 5d7e2b5ed585 spi: core: allow reporting the effectivly used speed_hz for a transfer Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200917202420.1914104-1-mkl@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-21spi: imx: Remove unneeded probe messageFabio Estevam1-2/+0
There is no point in printing a plain "probed" message on successful probe. Just remove it and make the kernel log a bit less noisy. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200819123330.22880-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-19spi: imx: Do not print an error when PIO is usedFabio Estevam1-1/+1
There are cases that DMA is not used and the driver gracefully falls back to PIO mode. Do not treat it like an error message and move it to debug level instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200818223519.8737-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-27spi: imx: enable runtime pm supportClark Wang1-33/+88
Enable runtime pm support for spi-imx driver. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20200727063354.17031-1-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-13spi: imx/fsl-lpspi: Convert to GPIO descriptorsLinus Walleij1-76/+16
This converts the two Freescale i.MX SPI drivers Freescale i.MX (CONFIG_SPI_IMX) and Freescale i.MX LPSPI (CONFIG_SPI_FSL_LPSPI) to use GPIO descriptors handled in the SPI core for GPIO chip selects whether defined in the device tree or a board file. The reason why both are converted at the same time is that they were both using the same platform data and platform device population helpers when using board files intertwining the code so this gives a cleaner cut. The platform device creation was passing a platform data container from each boardfile down to the driver using struct spi_imx_master from <linux/platform_data/spi-imx.h>, but this was only conveying the number of chipselects and an int * array of the chipselect GPIO numbers. The imx27 and imx31 platforms had code passing the now-unused platform data when creating the platform devices, this has been repurposed to pass around GPIO descriptor tables. The platform data struct that was just passing an array of integers and number of chip selects for the GPIO lines has been removed. The number of chipselects used to be passed from the board file, because this number also limits the number of native chipselects that the platform can use. To deal with this we just augment the i.MX (CONFIG_SPI_IMX) driver to support 3 chipselects if the platform does not define "num-cs" as a device property (such as from the device tree). This covers all the legacy boards as these use <= 3 native chip selects (or GPIO lines, and in that case the number of chip selects is determined by the core from the number of available GPIO lines). Any new boards should use device tree, so this is a reasonable simplification to cover all old boards. The LPSPI driver never assigned the number of chipselects and thus always fall back to the core default of 1 chip select if no GPIOs are defined in the device tree. The Freescale i.MX driver was already partly utilizing the SPI core to obtain the GPIO numbers from the device tree, so this completes the transtion to let the core handle all of it. All board files and the core i.MX boardfile registration code is augmented to account for these changes. This has been compile-tested with the imx_v4_v5_defconfig and the imx_v6_v7_defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Trent Piepho <tpiepho@impinj.com> Cc: Clark Wang <xiaoning.wang@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Link: https://lore.kernel.org/r/20200625200252.207614-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23spi: imx: add fallback featureRobin Gong1-21/+14
Add fallback pio feature in case dma transfer failed before start. Besides, another whole pio transfer including setup_transfer will be issued by spi core, no need to restore jobs like commit bcd8e7761ec9 ("spi: imx: fallback to PIO if dma setup failure"). Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592347329-28363-3-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28spi: imx: fallback to PIO if dma setup failureRobin Gong1-4/+27
Fallback to PIO in case dma setup failed. For example, sdma firmware not updated but ERR009165 workaroud added in kernel. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/1590006865-20900-6-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-25spi: imx: use true,false for bool variablezhengbin1-2/+2
Fixes coccicheck warning: drivers/spi/spi-imx.c:1233:2-17: WARNING: Assignment of 0/1 to bool variable drivers/spi/spi-imx.c:1235:2-17: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Link: https://lore.kernel.org/r/1577159526-33689-3-git-send-email-zhengbin13@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15spi: imx: Use dma_request_chan() directly for channel requestPeter Ujfalusi1-2/+2
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113094256.1108-5-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-15Merge branch 'spi-5.1' into spi-5.2 for stm32Mark Brown1-1/+1
2019-03-13spi: imx: stop buffer overflow in RX FIFO flushTrent Piepho1-1/+1
Commit 71abd29057cb ("spi: imx: Add support for SPI Slave mode") added an RX FIFO flush before start of a transfer. In slave mode, the master may have sent more data than expected and this data will still be in the RX FIFO at the start of the next transfer, and so needs to be flushed. However, the code to do the flush was accidentally saving this data into the previous transfer's RX buffer, clobbering the contents of whatever followed that buffer. Change it to empty the FIFO and throw away the data. Every one of the RX functions for the different eCSPI versions and modes reads the RX FIFO data using the same readl() call, so just use that, rather than using the spi_imx->rx function pointer and making sure all the different rx functions have a working "throw away" mode. There is another issue, which affects master mode when switching from DMA to PIO. There can be extra data in the RX FIFO which triggers this flush code, causing memory corruption in the same manner. I don't know why this data is unexpectedly in the FIFO. It's likely there is a different bug or erratum responsible for that. But regardless of that, I think this is proper fix the for bug at hand here. Fixes: 71abd29057cb ("spi: imx: Add support for SPI Slave mode") Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11spi: imx: add module parameter to control DMA useTrent Piepho1-0/+7
Add the boolean module parameter "use_dma" to control the use of DMA by the driver. There are about two dozen other drivers with a "use_dma" parameter of some sort. DMA may allow faster and more efficient transfers than using PIO, but it also adds overhead for small transfers. High speed receive operations may be less likely to have issues with FIFO overflow when using DMA than when using PIO. The eCSPI appears to insert a 4 bit pause after each word in DMA mode, not done in PIO mode, which can make DMA transfers 50% slower than PIO. In some cases DMA may be a net win while in others PIO might be. It depends on the application. So allow DMA to be enabled or disabled at the driver level. The default will be to have it enabled when possible. Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-11spi: imx: drop useless member speed_hz from driver data structUwe Kleine-König1-7/+5
The driver data's member variable just caches the transfer's speed_hz member. All users of the former now have access directly to the latter. So fix them to use the uncached value and remove the cache. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-11spi: imx: rename config callback and add useful parametersUwe Kleine-König1-17/+22
The config callback is called once per transfer while some things can (and should) be done on a per message manner. To have unambiguous naming in the end include "transfer" in the callback's name and rename the implementations accordingly. Also pass the driver struct and transfer which allows further simplifications in the following patch. There is no change in behavior intended here. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-11spi: imx: style fixesUwe Kleine-König1-7/+9
This change fixes some random style issues that I noticed while debugging the driver: Remove some double spaces, use tabs for indention instead of spaces if possible, fix comment style. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-11spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.Uwe Kleine-König1-27/+40
The relevant difference between prepare_message and config is that the former is run before the CS signal is asserted. So the polarity of the CLK line must be configured in prepare_message as an edge generated by config might already result in a latch of the MOSI line. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-11spi: imx: add a device specific prepare_message callbackUwe Kleine-König1-1/+39
This is just preparatory work which allows to move some initialisation that currently is done in the per transfer hook .config to an earlier point in time in the next few patches. There is no change in behaviour introduced by this patch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-12spi: imx: use PIO mode if size is smallRobin Gong1-0/+3
Use PIO mode instead if size is smaller than fifo size, since dma may be less efficient. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-12spi: imx: correct wml as the last sg lengthRobin Gong1-10/+19
Correct wml as the last rx sg length instead of the whole transfer length. Otherwise, mtd_stresstest will be failed as below: insmod mtd_stresstest.ko dev=0 ================================================= mtd_stresstest: MTD device: 0 mtd_stresstest: not NAND flash, assume page size is 512 bytes. mtd_stresstest: MTD device size 4194304, eraseblock size 65536, page size 512, count of eraseblocks 64, pa0 mtd_stresstest: doing operations mtd_stresstest: 0 operations done mtd_test: mtd_read from 1ff532, size 880 mtd_test: mtd_read from 20c267, size 64998 spi_master spi0: I/O Error in DMA RX m25p80 spi0.0: SPI transfer failed: -110 spi_master spi0: failed to transfer one message from queue mtd_test: error: read failed at 0x20c267 mtd_stresstest: error -110 occurred ================================================= insmod: ERROR: could not insert module mtd_stresstest.ko: Connection timed out Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-12spi: imx: move wml setting to later than setup_transferRobin Gong1-9/+14
Current dynamic burst length is based on the whole transfer length, that's ok if there is only one sg, but is not right in case multi sgs in one transfer,because the tail data should be based on the last sg length instead of the whole transfer length. Move wml setting for DMA to the later place, thus, the next patch could get the right last sg length for wml setting. This patch is a preparation one, no any function change involved. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-24spi: imx: Use the longuest possible burst size when in dynamic_burstMaxime Chevallier1-37/+85
Dynamic burst mode allows to group together multiple words and send them in one continuous burst. When the number of bytes to be sent is not a strict multiple of the FIFO entry size (32 bits), the controller expects the non aligned bits to be sent first. This commit adds support for this particular constraint, avoiding the need to send the non-aligned bytes one by one at the end of the transfer, speeding-up transfer speed in that case. With this method, a transfer is divided into multiple bursts, limited in size by the maximum amount of data that the controller can transfer in one continuous burst (which is 512 bytes). The non-512 byte part of the transfer is sent first. The remaining bytes to be transferred in the current burst is stored in the 'remainder' field. With this method, the read_u32 field is no longer necessary, and is removed. This was tested on imx6 solo and imx6 quad. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-24spi: imx: remove unnecessary check in spi_imx_can_dmaMaxime Chevallier1-3/+0
The spi_imx_can_dma function computes the watermark level so that the transfer will fit in exactly N bursts (without a remainder). The smallest watermark level possible being one FIFO entry per burst, we can't never have a case where the transfer size isn't divsiible by 1. Remove the extra check for the wml being different than 0. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-24spi: imx: Use correct number of bytes per wordsMaxime Chevallier1-4/+6
The SPI core enforces that we always use the next power-of-two number of bytes to store words. As a result, a 24 bits word will be stored in 4 bytes. This commit fixes the spi_imx_bytes_per_word function to return the correct number of bytes. This also allows to get rid of unnecessary checks in the can_dma function, since the SPI core validates that we always have a transfer length that is a multiple of the number of bytes per word. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-24spi: imx: Use dynamic bursts only when bits_per_word is 8, 16 or 32Maxime Chevallier1-14/+9
The dynamic bursts mode allows to group together multiple words into a single burst. To do so, it's necessary that words can be packed into the 32-bits FIFO entries, so we can't allow using this mode with bit_per_words different to 8, 16 or 32. This prevents shitfing out extra clock ticks for transfers with bit_per_word values not aligned on 8 bits. With that , we are sure that only the correct number of bits is shifted out at each transfer, so we don't need to mask out the remaining parts of the words. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-24spi: imx: Remove duplicate variable assignmentsMaxime Chevallier1-2/+0
Some fields in struct spi_imx_data are assigned a different value twice in a row, in spi_imx_setupxfer. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-2/+3
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 19:47:38 +0300