summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-dw-pci.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-09spi: dw: Add DWC SSI capabilitySerge Semin1-6/+0
Currently DWC SSI core is supported by means of setting up the core-specific update_cr0() callback. It isn't suitable for multiple reasons. First of all having exported several methods doing the same thing but for different chips makes the code harder to maintain. Secondly the spi-dw-core driver exports the methods, then the spi-dw-mmio driver sets the private data callback with one of them so to be called by the core driver again. That makes the code logic too complicated. Thirdly using callbacks for just updating the CR0 register is problematic, since in case if the register needed to be updated from different parts of the code, we'd have to create another callback (for instance the SPI device-specific parameters don't need to be calculated each time the SPI transfer is submitted, so it's better to pre-calculate the CR0 data at the SPI-device setup stage). So keeping all the above in mind let's discard the update_cr0() callbacks, define a generic and static dw_spi_update_cr0() method and create the DW_SPI_CAP_DWC_SSI capability, which when enabled would activate the alternative CR0 register layout. While at it add the comments to the code path of the normal DW APB SSI controller setup to make the dw_spi_update_cr0() method looking coherent. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17spi: dw-pci: free previously allocated IRQs if desc->setup() failsJay Fang1-7/+9
Free previously allocated IRQs when return an error code of desc->setup() which is not always successful. And simplify the code by adding a goto label. Fixes: 8f5c285f3ef5 ("SPI: designware: pci: Switch over to MSI interrupts") CC: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1600132969-53037-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Cleanup generic DW DMA code namingsSerge Semin1-2/+2
Since from now the former Intel MID platform layer is used as a generic DW SPI DMA module, let's alter the internal methods naming to be DMA-related instead of having the "mid_" prefix. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-14-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Move Non-DMA code to the DW PCIe-SPI driverSerge Semin1-3/+47
This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-06spi: dw: Add Elkhart Lake PSE DMA supportJarkko Nikula1-0/+1
Elkhart Lake PSE SPI is capable to utilize PSE DMA engine which is described in ACPI. With help of acpi-dma module the support becomes a generic one. Thus, add Elkhart Lake PSE DMA support and generic DMA hooks in SPI DesignWare driver. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-8-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-06spi: dw: Add 'mfld' suffix to Intel Medfield related routinesAndy Shevchenko1-2/+2
In order to prepare driver for the extension to support newer hardware, add 'mfld' suffix to some related functions. While here, move DMA parameters assignment under existing #ifdef CONFIG_SPI_DW_MID_DMA. There is no functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-6-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-06spi: dw: Move interrupt.h to spi-dw.h who is user of itAndy Shevchenko1-1/+0
The actual user of interrupt.h is spi-dw.h and not bus drivers. Move header there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-22spi: dw-pci: Fix Chip Select amount on Intel Elkhart Lake PSE SPIJarkko Nikula1-1/+1
Intel(R) Programmable Services Engine (Intel(R) PSE) SPI controllers in Intel Elkhart Lake have two Chip Select signals instead of one. Reported-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20191018132131.31608-3-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-22spi: dw-pci: Add runtime power management supportRaymond Tan1-0/+9
Implement pm_runtime hooks at pci driver. Signed-off-by: Raymond Tan <raymond.tan@intel.com> [jarkko.nikula@linux.intel.com: Forward ported on top of commit 1e6959832510 ("spi: dw: Add basic runtime PM support")] Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20191018132131.31608-2-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01SPI: designware: pci: Switch over to MSI interruptsFelipe Balbi1-2/+11
Some devices support MSI interrupts. Let's at least try to use them in platforms that provide MSI capability. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Link: https://lore.kernel.org/r/20191001081405.764161-1-felipe.balbi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-15Merge branch 'spi-5.4' into spi-nextMark Brown1-4/+2
2019-08-30spi: dw-pci: Add MODULE_DEVICE_TABLEJarkko Nikula1-0/+1
MODULE_DEVICE_TABLE is missing from the PCI part of the driver. Add it so userspace can autoload the the driver when it is built as module. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20190829125000.26303-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-23Merge branch 'spi-5.3' into spi-5.4Mark Brown1-0/+13
2019-08-12spi: dw-pci: Add support for Intel Elkhart Lake PSE SPIJarkko Nikula1-0/+13
Add support for Intel(R) Programmable Services Engine (Intel(R) PSE) SPI controller in Intel Elkhart Lake when interface is assigned to the host processor. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20190812101344.3975-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-24spi: dw-pci: Use dev_get_drvdataChuhong Yuan1-4/+2
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20190724122331.21856-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11spi: dw-pci: Spelling s/paltforms/platforms/gGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw-pci: remove unused pdev member from struct dw_spi_pciAndy Shevchenko1-20/+9
The pdev member is not used anywhere, thus remove it. Moreover struct dw_spi_pci becomes an equivalent of struct dw_spi and therefore remove entire struct dw_spi_pci. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-24spi: dw-pci: correct number of chip selectsAndy Shevchenko1-2/+2
The commit d58cf5ff6500 brought a second controller to the list of supported devices and changed a number of the chip selects. Besides the previous number was wrong anyway the mentioned patch makes it wrong again meanwhile has a proper numbers in the commit message. Indeed, SPI1 has 5 bits and SPI2 has 2 bits, but it does not mean to have power of two of this bits as a possible number of the chip selects. So, this patch fixes it eventually. Fixes: d58cf5ff6500 (spi: dw-pci: describe Intel MID controllers better) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-27spi: dw-mid: get a proper clock frequency for SPI2Andy Shevchenko1-3/+3
The clock information is being kept in the custom register on Intel MID platforms. Each controller has its own dedicated custom register for that. Thus, to get a proper frequency we have to read value from the specific offset to the register block. This patch makes this happen. Fixes: d58cf5ff6500 (spi: dw-pci: describe Intel MID controllers better) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-07spi: dw-pci: describe Intel MID controllers betterAndy Shevchenko1-8/+30
There are more that one SPI controller on the Intel MID boards. This patch describes the status and IDs of them. From now on we also have to care about bus number that must be unique per host. According to the specification the SPI1 has 5 bits for chip selects and SPI2 only 2 bits. The patch makes it depend to PCI ID. The first controller (SPI1) is DMA capable, meanwhile SPI2 can share same channels (via software switch) such functionality is not in the scope of this patch. Thus, attempt to init DMA for SPI2 will always fail for now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-03Merge remote-tracking branches 'spi/topic/davinci', 'spi/topic/doc', ↵Mark Brown1-37/+30
'spi/topic/dw' and 'spi/topic/fsl' into spi-next
2014-09-01spi: dw-pci: remove FSF address and update copyrightAndy Shevchenko1-5/+1
The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: provide platform specific data via driver_dataAndy Shevchenko1-6/+14
Instead of checking for device and vendor IDs inside probe function let's provide a helper function via driver_data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: convert to use dev_pm_opsAndy Shevchenko1-22/+11
Convert system PM callbacks to use dev_pm_ops. In addition remove the PCI calls related to a power state since the bus code cares about this already. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: apply pci_bar and re-use pci_nameAndy Shevchenko1-1/+1
Nevertheless pci_bar is 0 let's explicitly use it when map IO regions. While here, use pci_name instead of dev_name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: dw-pci: move info message at the end of probeAndy Shevchenko1-3/+3
Let's print info message when controller is found and properly initialized. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-08-27spi: dw-pci: fix bug when regs left uninitializedAndy Shevchenko1-0/+2
The commit 04f421e7 "spi: dw: use managed resources" changes drivers to use managed functions, but seems wasn't properly tested in PCI case. The regs field of struct dw_spi left uninitialized. Thus, kernel crashes when tries to access to the SPI controller registers. This patch fixes the issue. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-01-23Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/gpio', ↵Mark Brown1-1/+1
'spi/topic/hspi', 'spi/topic/mpc512x', 'spi/topic/msiof', 'spi/topic/nuc900', 'spi/topic/oc-tiny', 'spi/topic/omap', 'spi/topic/orion' and 'spi/topic/pci' into spi-linus
2014-01-07spi: dw-pci: remove free for resources allocated with devm_*Wei Yongjun1-4/+0
It's not necessary to free resources allocated with devm_* and free them may lead to double free. Fixes: 04f421e7b0b1 ('spi: dw: use managed resources') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-06spi: dw-pci: fix typoBaruch Siach1-1/+2
Commit 04f421e7b0b10 (spi: dw: use managed resources) introduced a typo in struct field reference. Fix it. Fixes build failure: drivers/spi/spi-dw-pci.c: In function 'spi_pci_probe': drivers/spi/spi-dw-pci.c:50:29: error: 'dev' undeclared (first use in this function) dwpci = devm_kzalloc(&pdev-dev, sizeof(struct dw_spi_pci), GFP_KERNEL); ^ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi: dw: use managed resourcesBaruch Siach1-30/+10
Migrate mmio code and core driver to managed resources to reduce boilerplate error handling code. Also, handle clk_enable() failure while at it, and drop unused dw_spi iolen field. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03spi: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han1-1/+1
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-14spi: dw-pci: Use dev_info() instead of printk()Jingoo Han1-1/+1
Change raw printk() call to dev_info() to provide a better message to userspace so it can properly identify the device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: dw-pci: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-11spi: use module_pci_driverAxel Lin1-12/+1
This patch converts the drivers in drivers/spi/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-10spi: Convert to DEFINE_PCI_DEVICE_TABLEAxel Lin1-1/+1
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-01spi: Add module.h to implicit users in drivers/spiPaul Gortmaker1-0/+1
We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-06-06spi: reorganize driversGrant Likely1-0/+181
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 10:07:40 +0300