summaryrefslogtreecommitdiff
path: root/drivers/soundwire
AgeCommit message (Collapse)AuthorFilesLines
2021-04-06soundwire: intel_init: test link->cdnsBard Liao1-0/+9
intel_link_probe() could return error and dev_get_drvdata() will return null in such case. So we have to test link->cdns after link->cdns = dev_get_drvdata(&ldev->auxdev.dev); Otherwise, we will meet the "kernel NULL pointer dereference" error. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210406010101.11442-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: handle return correctly in qcom_swrm_transport_paramsSrinivas Kandagatla1-0/+10
Looks like return from reg_write is set but not checked. Fix this by adding error return path. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1503591 ("UNUSED_VALUE") Fixes: 128eaf937adb ("soundwire: qcom: add support to missing transport params") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210401091502.15825-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: cleanup internal port config indexingSrinivas Kandagatla1-13/+14
Internally used portconfig array for storing port bandwidth params starts from offset zero. However port zero is not really used and we also copy the bus parameters to offset zero. So basically we endup with a code which has to subtract 1 from port number to get to port parameters. This is bit confusing to the reader so, make this bit more obvious by only copying the parameters to offset 1 instead of zero. This will avoid doing -1 every time when we try to get port params. Similar thing has been recently done with din/dout_port_mask. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210401092454.21299-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: wait for fifo space to be available before read/writeSrinivas Kandagatla1-0/+66
If we write registers very fast we can endup in a situation where some of the writes will be dropped without any notice. So wait for the fifo space to be available before reading/writing the soundwire registers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210401090058.24041-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: add static port map supportSrinivas Kandagatla1-2/+18
SoundWire device ports are statically mapped to Controller ports during design. Add support to read these from SoundWire devices. This controller uses static port map info to setup bandwidth parameters for those ports. A generic port allocation is not possible in this cases! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210315165650.13392-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: update port map allocation bit maskSrinivas Kandagatla1-4/+7
currently the internal bitmask used for allocating ports starts with offset 0. This is bit confusing as data port numbers on Qualcomm controller are valid from 1 to 14. So adjust this bit mask accordingly, this will also help while adding static port map support. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210315165650.13392-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: stream: fix memory leak in stream config error pathRander Wang1-1/+9
When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. Fixes: 89e590535f32 ("soundwire: Add support for SoundWire stream management") Signed-off-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Keyon Jie <yang.jie@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210331004610.12242-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-01soundwire: qcom: use signed variable for error returnVinod Koul1-1/+1
We get warning of using a unsigned variable being compared to less than zero. The comparison is correct as it checks for errors from previous call to qcom_swrm_get_alert_slave_dev_num(), so we should use a signed variable here. While at it, drop the superfluous initialization as well drivers/soundwire/qcom.c: qcom_swrm_irq_handler() warn: impossible condition '(devnum < 0) => (0-255 < 0)' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210331155520.2987823-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: wait for enumeration to be complete in probeSrinivas Kandagatla1-0/+5
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-10-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: add auto enumeration supportSrinivas Kandagatla1-5/+81
Qualcomm SoundWire controller supports Auto Enumeration of the devices within the IP. This patch enables support for this feature. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-9-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_addSrinivas Kandagatla2-1/+4
Exporting these three functions makes sense as it can be used by other controllers like Qualcomm during auto-enumeration! Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210330144719.13284-8-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: add support to new interruptsSrinivas Kandagatla1-26/+135
Add support to new interrupts which includes reporting some of the error interrupts and adding support to SLAVE pending interrupt! This patch also changes the interrupt handler behaviour on handling any pending interrupts by checking it before returning out of irq handler. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-7-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: update register read/write routineSrinivas Kandagatla1-79/+100
In the existing code every soundwire register read and register write are kinda blocked. Each of these are using a special command id that generates interrupt after it successfully finishes. This is really overhead, limiting and not really necessary unless we are doing something special. We can simply read/write the fifo that should also give exactly what we need! This will also allow to read/write registers in interrupt context, which was not possible with the special command approach. With previous approach number of interrupts generated after enumeration are around 130: $ cat /proc/interrupts | grep soundwire 21: 130 0 0 0 0 0 0 0 GICv3 234 Edge soundwire after this patch they are just 3 interrupts $ cat /proc/interrupts | grep soundwire 21: 3 0 0 0 0 0 0 0 GICv3 234 Edge soundwire This has significantly not only reduced interrupting CPU during enumeration but also during streaming! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-6-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: start the clock during initializationSrinivas Kandagatla1-0/+3
Start the clock during initialization, doing this explicitly will add more clarity when we are adding clock stop feature. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-5-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: set continue execution flag for ignored commandsSrinivas Kandagatla1-1/+10
version 1.5.1 and higher IPs of this controller required to set continue execution on ignored command flag. This patch sets this flag. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: add support to missing transport paramsSrinivas Kandagatla1-12/+94
Some of the transport parameters derived from device tree are not fully parsed by the driver. This patch adds support to parse those missing parameters. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210330144719.13284-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: cadence: only prepare attached devices on clock stopPierre-Louis Bossart1-4/+6
We sometimes see COMMAND_IGNORED responses during the clock stop sequence. It turns out we already have information if devices are present on a link, so we should only prepare those when they are attached. In addition, even when COMMAND_IGNORED are received, we should still proceed with the clock stop. The device will not be prepared but that's not a problem. The only case where the clock stop will fail is if the Cadence IP reports an error (including a timeout), or if the devices throw a COMMAND_FAILED response. BugLink: https://github.com/thesofproject/linux/issues/2621 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323013707.21455-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: generic_allocation: fix confusion between group and packingPierre-Louis Bossart1-4/+3
The existing code makes no sense, we multiply a channel number by zero (SDW_BLK_GRP_CNT_1), and the result is used to configure the block packing mode. Sampling grouping and channel packing are two separate concepts in SoundWire. In addition, the bandwidth allocation allocates a vertical slice for each stream, which makes the use of the PER_CHANNEL packing mode irrelevant. Let's use the proper definition for block packing mode (PER_PORT). This change has no functional impact though since the net result is the same configuration of the DPN_BlockCtrl3 register, when implemented. Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323050701.23760-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: bus: Fix device found flag correctlySrinivas Kandagatla1-1/+2
found flag is used to indicate SoundWire devices that are both enumerated on the bus and available in the device list. However this flag is not reset correctly after one iteration, This could miss some of the devices that are enumerated on the bus but not in device list. So reset this correctly to fix this issue! Fixes: d52d7a1be02c ("soundwire: Add Slave status handling helpers") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210309104816.20350-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: cadence_master: fix kernel-docPierre-Louis Bossart1-2/+2
v5.12-rc1 flags new warnings with make W=1, fix missing or broken function descriptors. drivers/soundwire/cadence_master.c:914: warning: expecting prototype for To update slave status in a work since we will need to handle(). Prototype was for cdns_update_slave_status_work() instead drivers/soundwire/cadence_master.c:976: warning: expecting prototype for sdw_cdns_enable_slave_interrupt(). Prototype was for cdns_enable_slave_interrupts() instead Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210301174714.117172-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: stream: remove useless bus initializationsPierre-Louis Bossart1-2/+2
There is no need to assign a pointer to NULL if it's only used in a loop and assigned within that loop. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-12-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: stream: remove useless initializationPierre-Louis Bossart1-2/+2
Cppcheck complains about possible null pointer dereferences, but it's more like there are unnecessary initializations before walking through a list. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-11-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: qcom: check of_property_read statusPierre-Louis Bossart1-0/+3
Cppcheck complains: drivers/soundwire/qcom.c:773:6: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", ^ The return value is checked for all other cases, not sure why it was missed here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-10-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: intel: remove useless readlPierre-Louis Bossart1-2/+0
Cppcheck complains: drivers/soundwire/intel.c:564:15: style: Variable 'link_control' is assigned a value that is never used. [unreadVariable] link_control = intel_readl(shim, SDW_SHIM_LCTL); This looks like a leftover from a previous version, remove. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: generic_bandwidth_allocation: remove useless initPierre-Louis Bossart1-2/+2
Cppcheck complains about two possible null pointer dereferences, but it's more like there are unnecessary initializations before walking through a list. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-8-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: bus: remove useless initializationPierre-Louis Bossart1-1/+1
Cppcheck complains about a possible null pointer dereference, but it's more like there is an unnecessary initialization before walking through a list. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-7-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: bus: uniquify dev_err() for SCP_INT accessPierre-Louis Bossart1-3/+3
We have multiple cases where we read/write SCP_INT registers, but the same error message in all cases. Add a distinct error message for each case to help debug. Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: bus: demote clock stop prepare log to dev_dbg()Pierre-Louis Bossart1-2/+2
There is no real reason to provide this information except for debug sessions, hence dev_dbg() is a better fit. Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: bus: use consistent tests for return valuesPierre-Louis Bossart1-13/+13
We use different styles to check the return values of IO related routines. The majority of the cases use 'if (ret < 0)', align the remaining cases for consistency. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: bus: test read statusPierre-Louis Bossart1-4/+12
In the existing code we may read a negative error value but still mask it and write it back. Make sure all reads are tested and errors not propagated further. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-30soundwire: bus: use correct driver name in error messagesPierre-Louis Bossart1-3/+12
None of the existing codec drivers set the sdw_driver.name, but instead set sdw_driver.driver.name. This leads to error messages such as [ 23.935355] rt700 sdw:2:25d:700:0: Probe of (null) failed: -19 We could remove this sdw_driver.name if it doesn't have any purpose. This patch only suggests using the proper indirection. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210302091122.13952-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-23soundwire: qcom: add missing \n in dev_err()Pierre-Louis Bossart1-1/+1
We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323005855.20890-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-23soundwire: stream: add missing \n in dev_err()Pierre-Louis Bossart1-5/+5
We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323005855.20890-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-23soundwire: cadence: add missing \n in dev_err()Pierre-Louis Bossart1-1/+1
We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323005855.20890-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-23soundwire: bandwidth_allocation: add missing \n in dev_err()Pierre-Louis Bossart1-2/+2
We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323005855.20890-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-23soundwire: intel: add missing \n in dev_err()Pierre-Louis Bossart1-9/+9
We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210323005855.20890-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-22soundwire: intel: add master quirks for bus clash and parityBard Liao1-0/+3
Now that we have declarations and bus support, add quirks for Intel platforms. Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302082720.12322-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-22soundwire: bus: handle master quirks for bus clash and parityBard Liao1-0/+39
Add optional interrupt status read/clear if the master quirks are set. In the case of the parity, the master quirk is only applied if the Slave doesn't already have a parity-related quirk. Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302082720.12322-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-22soundwire: Intel: add DMI quirk for Dell SKU 0A3EPierre-Louis Bossart1-0/+30
We've been handling ACPI issues on early versions of the product with a local ACPI initrd override but now that we have the possibility of a kernel quirk let's get rid of the initrd override. This helps make sure that the kernel will support all versions of the BIOS, with or without updates. Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302075105.11515-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-22soundwire: Intel: introduce DMI quirks for HP Spectre x360 ConvertiblePierre-Louis Bossart4-1/+70
HP Spectre x360 Convertible devices expose invalid _ADR fields in the DSDT, which prevents codec drivers from probing. A possible solution is to override the DSDT, but that's just too painful for users. This patch suggests a simple DMI-based quirk to remap the existing invalid ADR information into valid ones. BugLink: https://github.com/thesofproject/linux/issues/2700 Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302075105.11515-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-22soundwire: add override addr opsVinod Koul1-1/+7
Platform firmware may have incorrect _ADR values causing the driver probes to fail. Add the override_ops, which when configured will allow for quirks based on DMI etc to override the addr values. Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302075105.11515-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-02ALSA: hda: move Intel SoundWire ACPI scan to dedicated modulePierre-Louis Bossart2-160/+0
The ACPI scan capabilities is called from the intel-dspconfig as well as the SOF/HDaudio drivers. This creates dependencies and randconfig issues when HDaudio and SOF/SoundWire are not all configured as modules. To simplify Kconfig dependencies between HDAudio, SoundWire, SOF and intel-dspconfig, move the ACPI scan helpers to a dedicated module. This follows the same idea as NHLT helpers which are already handled as a dedicated module. The only functional change is that the kernel parameter to filter links is now handled by a different module, but that was only provided for developers needing work-arounds for early BIOS releases. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210302003125.1178419-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-02-11soundwire: intel: fix possible crash when no device is detectedMarcin Ślusarz1-1/+2
acpi_walk_namespace can return success without executing our callback which initializes info->handle. If the random value in this structure is a valid address (which is on the stack, so it's quite possible), then nothing bad will happen, because: sdw_intel_scan_controller -> acpi_bus_get_device -> acpi_get_device_data -> acpi_get_data_full -> acpi_ns_validate_handle will reject this handle. However, if the value from the stack doesn't point to a valid address, we get this: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 6 PID: 472 Comm: systemd-udevd Tainted: G W 5.10.0-1-amd64 #1 Debian 5.10.4-1 Hardware name: HP HP Pavilion Laptop 15-cs3xxx/86E2, BIOS F.05 01/01/2020 RIP: 0010:acpi_ns_validate_handle+0x1a/0x23 Code: 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 1f 44 00 00 48 8d 57 ff 48 89 f8 48 83 fa fd 76 08 48 8b 05 0c b8 67 01 c3 <80> 7f 08 0f 74 02 31 c0 c3 0f 1f 44 00 00 48 8b 3d f6 b7 67 01 e8 RSP: 0000:ffffc388807c7b20 EFLAGS: 00010213 RAX: 0000000000000048 RBX: ffffc388807c7b70 RCX: 0000000000000000 RDX: 0000000000000047 RSI: 0000000000000246 RDI: 0000000000000048 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffffc0f5f4d1 R11: ffffffff8f0cb268 R12: 0000000000001001 R13: ffffffff8e33b160 R14: 0000000000000048 R15: 0000000000000000 FS: 00007f24548288c0(0000) GS:ffff9f781fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000106158004 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: acpi_get_data_full+0x4d/0x92 acpi_bus_get_device+0x1f/0x40 sdw_intel_acpi_scan+0x59/0x230 [soundwire_intel] ? strstr+0x22/0x60 ? dmi_matches+0x76/0xe0 snd_intel_dsp_driver_probe.cold+0xaf/0x163 [snd_intel_dspcfg] azx_probe+0x7a/0x970 [snd_hda_intel] local_pci_probe+0x42/0x80 ? _cond_resched+0x16/0x40 pci_device_probe+0xfd/0x1b0 really_probe+0x205/0x460 driver_probe_device+0xe1/0x150 device_driver_attach+0xa1/0xb0 __driver_attach+0x8a/0x150 ? device_driver_attach+0xb0/0xb0 ? device_driver_attach+0xb0/0xb0 bus_for_each_dev+0x78/0xc0 bus_add_driver+0x12b/0x1e0 driver_register+0x8b/0xe0 ? 0xffffffffc0f65000 do_one_initcall+0x44/0x1d0 ? do_init_module+0x23/0x250 ? kmem_cache_alloc_trace+0xf5/0x200 do_init_module+0x5c/0x250 __do_sys_finit_module+0xb1/0x110 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210208120104.204761-1-marcin.slusarz@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-07soundwire: bus: clarify dev_err/dbg device referencesPierre-Louis Bossart1-30/+33
The SoundWire bus code confuses bus and Slave device levels for dev_err/dbg logs. That's not impacting functionality but the accuracy of kernel logs. We should only use bus->dev for bus-level operations and handling of Device0. For all other logs where the device number is not zero, we should use &slave->dev to provide more precisions to the user/integrator. Reported-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210122070634.12825-10-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-07soundwire: bus: fix confusion on device used by pm_runtimePierre-Louis Bossart1-9/+9
Intel stress-tests routinely report IO timeouts and invalid power management transitions. Upon further analysis, we seem to be using the wrong devices in pm_runtime calls. Before reading and writing registers, we first need to make sure the Slave is fully resumed. The existing code attempts to do such that, however because of a confusion dating from 2017 and copy/paste, we end-up resuming the parent only instead of resuming the codec device. This can lead to accesses to the Slave registers while the bus is still being configured and the Slave not enumerated, and as a result IO errors occur. This is a classic problem, similar confusions happened for HDaudio between bus and codec device, leading to power management issues. Fix by using the relevant device for all uses of pm_runtime functions. Fixes: 60ee9be255712 ('soundwire: bus: add PM/no-PM versions of read/write functions') Fixes: aa79293517b39 ('soundwire: bus: fix io error when processing alert event') Fixes: 9d715fa005ebc ('soundwire: Add IO transfer') Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210122070634.12825-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-07soundwire: export sdw_write/read_no_pm functionsBard Liao1-3/+4
sdw_write_no_pm and sdw_read_no_pm are useful when we want to do IO without touching PM. Fixes: 0231453bc08f ('soundwire: bus: add clock stop helpers') Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210122070634.12825-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06soundwire: bus: use no_pm IO routines for all interrupt handlingPierre-Louis Bossart1-13/+13
There is no need to play with pm_runtime reference counts, if needed the codec drivers are already explicitly resumed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210122070634.12825-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06soundwire: bus: use sdw_write_no_pm when setting the bus scale registersPierre-Louis Bossart1-3/+3
When a Slave device is resumed, it may resume the bus and restart the enumeration. During that process, we absolutely don't want to call regular read/write routines which will wait for the resume to complete, otherwise a deadlock occurs. This patch fixes the same problem as the previous one, but is split to make the life of linux-stable maintainers less painful. Fixes: 29d158f90690 ('soundwire: bus: initialize bus clock base and scale registers') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210122070634.12825-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06soundwire: bus: use sdw_update_no_pm when initializing a devicePierre-Louis Bossart1-2/+14
When a Slave device is resumed, it may resume the bus and restart the enumeration. During that process, we absolutely don't want to call regular read/write routines which will wait for the resume to complete, otherwise a deadlock occurs. Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20210122070634.12825-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-06soundwire: Revert "soundwire: debugfs: use controller id instead of link_id"Vinod Koul1-1/+1
This reverts commit 6d5e7af1f6f5 ("soundwire: debugfs: use controller id instead of link_id") for now while we arrive at a better way for this. Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 06:02:25 +0300