summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2020-02-12soc/tegra: fuse: Fix build with Tegra194 configurationThierry Reding1-1/+2
If only Tegra194 support is enabled, the tegra30_fuse_read() and tegra30_fuse_init() function are not declared and cause a build failure. Add Tegra194 to the preprocessor guard to make sure these functions are available for Tegra194-only builds as well. Link: https://lore.kernel.org/r/20200203143114.3967295-1-thierry.reding@gmail.com Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-09Merge tag 'armsoc-drivers' of ↵Linus Torvalds39-567/+654
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-09Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-2/+3
Pull ARM SoC platform updates from Olof Johansson: "Most of these are smaller fixes that have accrued, and some continued cleanup of OMAP platforms towards shared frameworks. One new SoC from Atmel/Microchip: sam9x60" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: OMAP2+: Fix undefined reference to omap_secure_init ARM: s3c64xx: Drop unneeded select of TIMER_OF ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0 ARM: s3c24xx: Switch to atomic pwm API in rx1950 ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init() ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization ARM: at91: Documentation: add sam9x60 product and datasheet ARM: at91: pm: use of_device_id array to find the proper shdwc node ARM: at91: pm: use SAM9X60 PMC's compatible ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume ARM: tegra: Modify reshift divider during LP1 ARM: tegra: Enable PLLP bypass during Tegra124 LP1 ARM: samsung: Rename Samsung and Exynos to lowercase ARM: exynos: Correct the help text for platform Kconfig option ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB ARM: brcmstb: Add debug UART entry for 7216 ...
2020-01-31Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds1-3/+1
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-26/+121
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-28Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds5-8/+8
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-0/+1169
Pull dmaengine updates from Vinod Koul: "This time we have a bunch of core changes to support dynamic channels, hotplug of controllers, new apis for metadata ops etc along with new drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers. Core: - Support for dynamic channels - Removal of various slave wrappers - Make few slave request APIs as private to dmaengine - Symlinks between channels and slaves - Support for hotplug of controllers - Support for metadata_ops for dma_async_tx_descriptor - Reporting DMA cached data amount - Virtual dma channel locking updates New drivers/device/feature support support: - Driver for Intel data accelerators - Driver for TI K3 UDMA - Driver for PLX DMA engine - Driver for hisilicon Kunpeng DMA engine - Support for eDMA support for QorIQ LS1028A in fsl edma driver - Support for cyclic dma in sun4i driver - Support for X1830 in JZ4780 driver" * tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits) dmaengine: Create symlinks between DMA channels and slaves dmaengine: hisilicon: Add Kunpeng DMA engine support dmaengine: idxd: add char driver to expose submission portal to userland dmaengine: idxd: connect idxd to dmaengine subsystem dmaengine: idxd: add descriptor manipulation routines dmaengine: idxd: add sysfs ABI for idxd driver dmaengine: idxd: add configuration component of driver dmaengine: idxd: Init and probe for Intel data accelerators dmaengine: add support to dynamic register/unregister of channels dmaengine: break out channel registration x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited" dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too" dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h dmaengine: Remove dma_request_slave_channel_compat() wrapper dmaengine: Remove dma_device_satisfies_mask() wrapper dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string dmaengine: zynqmp_dma: fix burst length configuration dmaengine: sun4i: Add support for cyclic requests with dedicated DMA dmaengine: fsl-qdma: fix duplicated argument to && ...
2020-01-22Merge tag 'zynqmp-soc-for-v5.6' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson2-14/+112
arm/drivers arm64: soc: ZynqMP SoC changes for v5.6 - Extend firmware interface for feature checking - Use mailbox for communication with firmware for power management * tag 'zynqmp-soc-for-v5.6' of https://github.com/Xilinx/linux-xlnx: drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: firmware: xilinx: Add support for feature check Link: https://lore.kernel.org/r/f6fb26f8-b00d-a3e8-bf7d-c7ff2a8483b1@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-21drivers: soc: xilinx: Use mailbox IPI callbackTejas Patel2-14/+112
Add support for init suspend callback through mailbox IPI callback. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-20Merge tag 'v5.5-next-soc' of ↵Olof Johansson1-28/+121
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers cmdq: - clean ups of unused code and debuggability - add cmdq_instruction to make the function call interface more readable - add functions for polling and providing info for the user of cmdq scpsys: - add bindings for MT6765 * tag 'v5.5-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define soc: mediatek: cmdq: add cmdq_dev_get_client_reg function soc: mediatek: cmdq: add polling function soc: mediatek: cmdq: define the instruction struct soc: mediatek: cmdq: remove OR opertaion from err return Link: https://lore.kernel.org/r/9b365e76-e346-f813-d750-d7cfd0d16e4e@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU listsAmol Grover1-2/+5
inst->handles is traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of knav_dev_lock. Hence, add corresponding lockdep expression to silence false-positive lockdep warnings, and harden RCU lists. Add macro for the corresponding lockdep expression. Link: https://lore.kernel.org/r/20200118042433.4968-1-frextrite@gmail.com Signed-off-by: Amol Grover <frextrite@gmail.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie7-11/+210
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-17Merge tag 'drivers_soc_for_5.6' of ↵Olof Johansson3-0/+1169
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers SOC: TI Keystone Ring Accelerator driver The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. * tag 'drivers_soc_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: k3: add navss ringacc driver bindings: soc: ti: add documentation for k3 ringacc Link: https://lore.kernel.org/r/1579205259-4845-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-17Merge tag 'armsoc-fixes' of ↵Linus Torvalds2-11/+17
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I've been sitting on these longer than I meant, so the patch count is a bit higher than ideal for this part of the release. There's also some reverts of double-applied patches that brings the diffstat up a bit. With that said, the biggest changes are: - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees. - Move of two device nodes that got applied to the wrong part of the tree on ASpeed G6. - Regulator fix for Beaglebone X15 (adding 12/5V supplies) - Use interrupts for keys on Amlogic SM1 to avoid missed polls In addition to that, there is a collection of smaller DT fixes: - Power supply assignment fixes for i.MX6 - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit - Build fixlets (selects) for davinci/omap2+ - More interrupt number fixes for Stratix10, Amlogic SM1, etc. - ... and more similar fixes across different platforms And some non-DT stuff: - optee fix to register multiple shared pages properly - Clock calculation fixes for MMP3 - Clock fixes for OMAP as well" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL ARM: omap2plus: select RESET_CONTROLLER ARM: davinci: select CONFIG_RESET_CONTROLLER ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location ARM: dts: mmp3: Fix the TWSI ranges clk: mmp2: Fix the order of timer mux parents ARM: mmp: do not divide the clock rate arm64: dts: rockchip: Fix IR on Beelink A1 optee: Fix multi page dynamic shm pool alloc ...
2020-01-17Merge tag 'qcom-drivers-for-5.6' of ↵Olof Johansson3-17/+77
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.6 * SCM major refactoring and cleanup * Properly flag active only power domains as active only * Add SC7180 and SM8150 RPMH power domains * Return EPROBE_DEFER from QMI if packet family is not yet available * tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) firmware: qcom_scm: Dynamically support SMCCC and legacy conventions firmware: qcom_scm: Remove thin wrappers firmware: qcom_scm: Order functions, definitions by service/command firmware: qcom_scm-32: Add device argument to atomic calls firmware: qcom_scm-32: Create common legacy atomic call firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls firmware: qcom_scm-32: Add funcnum IDs firmware: qcom_scm-32: Use SMC arch wrappers firmware: qcom_scm-64: Improve SMC convention detection firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc firmware: qcom_scm-64: Add SCM results struct firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc firmware: qcom_scm-64: Make SMC macros less magical firmware: qcom_scm: Remove unused qcom_scm_get_version firmware: qcom_scm: Apply consistent naming scheme to command IDs firmware: qcom_scm: Rename macros and structures soc: qcom: rpmhpd: Set 'active_only' for active only power domains firmware: scm: Add stubs for OCMEM and restore_sec_cfg_available dt-bindings: power: rpmpd: Convert rpmpd bindings to yaml ... Link: https://lore.kernel.org/r/20200113204405.GD3325@yoga Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'soc-fsl-next-v5.6' of ↵Olof Johansson12-491/+339
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.6 QUICC Engine drivers - Improve the QE drivers to be compatible with ARM/ARM64/PPC64 architectures - Various cleanups to the QE drivers * tag 'soc-fsl-next-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: (49 commits) soc: fsl: qe: remove set but not used variable 'mm_gc' soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE soc: fsl: qe: remove unused #include of asm/irq.h from ucc.c net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32 net/wan/fsl_ucc_hdlc: reject muram offsets above 64K net/wan/fsl_ucc_hdlc: fix reading of __be16 registers net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE() soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c soc: fsl: qe: drop pointless check in qe_sdma_init() soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init() soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error path soc: fsl: qe: drop broken lazy call of cpm_muram_init() soc: fsl: qe: make cpm_muram_free() ignore a negative offset soc: fsl: qe: make cpm_muram_free() return void soc: fsl: qe: change return type of cpm_muram_alloc() to s32 serial: ucc_uart: access __be32 field using be32_to_cpu serial: ucc_uart: limit brg-frequency workaround to PPC32 serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe() serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32 ... Link: https://lore.kernel.org/r/1578608351-23289-1-git-send-email-leoyang.li@nxp.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'imx-driver-5.6' of ↵Olof Johansson2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX driver changes for 5.6: - Add i.MX8MP SoC driver support. - Allow IMX DSP Protocol driver to be built as module. - Add COMPILE_TEST for IMX_SCU_SOC driver to increase build coverage. - Print SoC type and revision in i.MX8 SoC driver, as this is useful information to have when looking through boot log. * tag 'imx-driver-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: Allow IMX DSP to be selected as module soc: imx: Enable compile testing of IMX_SCU_SOC soc: imx: Add i.MX8MP SoC driver support soc: imx8: print SoC type and revision Link: https://lore.kernel.org/r/20200113034006.17430-1-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'tegra-for-5.6-soc' of ↵Olof Johansson7-15/+70
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers soc: tegra: Changes for v5.6-rc1 This adds a couple of optimizations to how the chip ID and straps are read and adds support for the FUSE block on Tegra194. Included is also a small optimization for the coupled regulator driver to abort early if no voltage change has occurred. * tag 'tegra-for-5.6-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers soc/tegra: regulators: Do nothing if voltage is unchanged soc/tegra: fuse: Add APB DMA dependency for Tegra20 soc/tegra: fuse: Add Tegra194 support Link: https://lore.kernel.org/r/20200111003553.2411874-4-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-15soc: ti: k3: add navss ringacc driverGrygorii Strashko3-0/+1169
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. The RINGACC converts constant-address read and write accesses to equivalent read or write accesses to a circular data structure in memory. The RINGACC eliminates the need for each DMA controller which needs to access ring elements from having to know the current state of the ring (base address, current offset). The DMA controller performs a read or write access to a specific address range (which maps to the source interface on the RINGACC) and the RINGACC replaces the address for the transaction with a new address which corresponds to the head or tail element of the ring (head for reads, tail for writes). Since the RINGACC maintains the state, multiple DMA controllers or channels are allowed to coherently share the same rings as applicable. The RINGACC is able to place data which is destined towards software into cached memory directly. Supported ring modes: - Ring Mode - Messaging Mode - Credentials Mode - Queue Manager Mode TI-SCI integration: Texas Instrument's System Control Interface (TI-SCI) Message Protocol now has control over Ringacc module resources management (RM) and Rings configuration. The corresponding support of TI-SCI Ringacc module RM protocol introduced as option through DT parameters: - ti,sci: phandle on TI-SCI firmware controller DT node - ti,sci-dev-id: TI-SCI device identifier as per TI-SCI firmware spec if both parameters present - Ringacc driver will configure/free/reset Rings using TI-SCI Message Ringacc RM Protocol. The Ringacc driver manages Rings allocation by itself now and requests TI-SCI firmware to allocate and configure specific Rings only. It's done this way because, Linux driver implements two stage Rings allocation and configuration (allocate ring and configure ring) while TI-SCI Message Protocol supports only one combined operation (allocate+configure). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah1-1/+1
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-11Merge tag 'samsung-drivers-5.6' of ↵Olof Johansson8-11/+9
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers Samsung soc drivers changes for v5.6 1. Convert to managed (devm_x()) versions, 2. Cleanups (Samsung and Exynos names). * tag 'samsung-drivers-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: memory: samsung: Rename Exynos to lowercase soc: samsung: Rename Samsung and Exynos to lowercase memory: samsung: exynos5422-dmc: Convert to devm_platform_ioremap_resource soc: samsung: exynos-pmu: Convert to devm_platform_ioremap_resource Link: https://lore.kernel.org/r/20200110172334.4767-2-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-11Merge tag 'arm-soc/for-5.6/drivers' of https://github.com/Broadcom/stblinux ↵Olof Johansson1-8/+22
into arm/drivers This pull request contains Broadcom ARM/ARM64/MIPS-based SoCs drivers changes for 5.6, please pull the following: - Florian provides a set of updates to the Bus Interface Unit control to tune it appropriately for the most recent chips: 7255, 7260, 7216, 7211 * tag 'arm-soc/for-5.6/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: brcmstb: biuctrl: Update programming for 7211 soc: bcm: brcmstb: biuctrl: Update layout for A72 on 7211 soc: bcm: brcmstb: biuctrl: Tune interface for 7255 and 7216 soc: bcm: brcmstb: biuctrl: Tune 7260 BIU interface Link: https://lore.kernel.org/r/20200108191114.15987-2-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-11Merge tag 'amlogic-fixes' of ↵Olof Johansson1-9/+15
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes arm-soc: Amlogic fixes for v5.5-rc * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt dt-bindings: reset: meson8b: fix duplicate reset IDs soc: amlogic: meson-ee-pwrc: propagate errors from pm_genpd_init() soc: amlogic: meson-ee-pwrc: propagate PD provider registration errors ARM: dts: meson8: fix the size of the PMU registers arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQs Link: https://lore.kernel.org/r/7hmuaweavi.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10soc: lantiq: convert to devm_platform_ioremap_resourceYangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: khilman@baylibre.com Cc: leoyang.li@nxp.com Cc: khalasa@piap.pl Cc: john@phrozen.org Cc: matthias.bgg@gmail.com Cc: agross@kernel.org Cc: bjorn.andersson@linaro.org Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: mripard@kernel.org Cc: wens@csie.org Cc: ssantosh@kernel.org Cc: jun.nie@linaro.org Cc: shawnguo@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org
2020-01-10soc/tegra: fuse: Unmap registers once they are not needed anymoreDmitry Osipenko1-4/+8
Both Chip ID and strapping registers are now read out during of APB MISC initialization, the registers' mapping isn't needed anymore once registers are read. Hence let's unmap registers once they are not needed anymore, for consistency. Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10soc/tegra: fuse: Correct straps' address for older Tegra124 device treesDmitry Osipenko1-1/+1
Trying to read out Chip ID before APBMISC registers are mapped won't succeed, in a result Tegra124 gets a wrong address for the HW straps register if machine uses an old outdated device tree. Fixes: 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10soc/tegra: fuse: Warn if straps are not readyDmitry Osipenko1-1/+3
Now both Chip ID and HW straps are becoming available at the same time, thus we could simply check the availability of the ID in order to check the availability of the straps. We couldn't check straps for 0x0 because it could be a correct value. This change didn't uncover any problems, but anyways it is nicer to have straps verified for consistency with the Chip ID verification. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10soc/tegra: fuse: Cache values of straps and Chip ID registersDmitry Osipenko1-11/+10
There is no need to re-read Chip ID and HW straps out from hardware each time, it is a bit nicer to cache the values in memory. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10soc/tegra: regulators: Do nothing if voltage is unchangedDmitry Osipenko2-1/+13
There is no need to re-apply the same voltage. This change is just a minor cleanup. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10soc/tegra: fuse: Add APB DMA dependency for Tegra20Dmitry Osipenko1-0/+1
Tegra20 FUSE driver depends on DMA channel presence, otherwise it fails to probe. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-10Merge branch 'v5.5-next/cmdq-stable' into v5.5-next/socMatthias Brugger1-26/+121
2020-01-10soc: mediatek: cmdq: delete not used defineMatthias Brugger1-2/+0
Define CMDQ_EOC_CMD was actually never used. Delete it. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-01-09soc/tegra: fuse: Add Tegra194 supportJC Kuo4-0/+37
This commit adds Tegra194 fuse/apbmisc support. Signed-off-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-09soc: imx: Enable compile testing of IMX_SCU_SOCKrzysztof Kozlowski1-1/+1
IMX_SCU_SOC can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09soc: imx: Add i.MX8MP SoC driver supportAnson Huang1-0/+6
Add i.MX8MP SoC driver support: root@imx8mpevk:~# cat /sys/devices/soc0/family Freescale i.MX root@imx8mpevk:~# cat /sys/devices/soc0/machine FSL i.MX8MP EVK root@imx8mpevk:~# cat /sys/devices/soc0/soc_id i.MX8MP root@imx8mpevk:~# cat /sys/devices/soc0/revision 1.0 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-01-09soc: fsl: qe: remove set but not used variable 'mm_gc'YueHaibing1-2/+0
drivers/soc/fsl/qe/gpio.c: In function qe_pin_request: drivers/soc/fsl/qe/gpio.c:163:26: warning: variable mm_gc set but not used [-Wunused-but-set-variable] commit 1e714e54b5ca ("powerpc: qe_lib-gpio: use gpiochip data pointer") left behind this unused variable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-01-08Merge tag 'cpuidle_psci-v5.5-rc4' of ↵Olof Johansson5-0/+193
git://git.linaro.org/people/ulf.hansson/linux-pm into arm/drivers Initial support for hierarchical CPU arrangement, managed by PSCI and its corresponding cpuidle driver. This support is based upon using the generic PM domain, which already supports devices belonging to CPUs. Finally, these is a DTS patch that enables the hierarchical topology to be used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated mode. * tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm: (611 commits) arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916 cpuidle: psci: Add support for PM domains by using genpd PM / Domains: Introduce a genpd OF helper that removes a subdomain cpuidle: psci: Support CPU hotplug for the hierarchical model cpuidle: psci: Manage runtime PM in the idle path cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains cpuidle: psci: Attach CPU devices to their PM domains cpuidle: psci: Add a helper to attach a CPU to its PM domain cpuidle: psci: Support hierarchical CPU idle states cpuidle: psci: Simplify OF parsing of CPU idle state nodes cpuidle: dt: Support hierarchical CPU idle states of: base: Add of_get_cpu_state_node() to get idle states for a CPU node firmware: psci: Export functions to manage the OSI mode dt: psci: Update DT bindings to support hierarchical PSCI states cpuidle: psci: Align psci_power_state count with idle state count Linux 5.5-rc4 locks: print unsigned ino in /proc/locks riscv: export flush_icache_all to modules riscv: reject invalid syscalls below -1 riscv: fix compile failure with EXPORT_SYMBOL() & !MMU ... Link: https://lore.kernel.org/r/20200102160820.3572-1-ulf.hansson@linaro.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-08soc: mediatek: cmdq: add cmdq_dev_get_client_reg functionBibby Hsieh1-0/+29
GCE cannot know the register base address, this function can help cmdq client to get the cmdq_client_reg structure. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-01-08soc: mediatek: cmdq: add polling functionBibby Hsieh1-0/+36
add polling function in cmdq helper functions Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-01-08soc: mediatek: cmdq: define the instruction structBibby Hsieh1-24/+49
Define an instruction structure for gce driver to append command. This structure can make the client's code more readability. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-01-08soc: mediatek: cmdq: remove OR opertaion from err returnBibby Hsieh1-3/+8
Debugging gets harder if we OR two error return values. Return each error on it's own instead Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> [mb: rephrase commit message] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-01-08soc: qcom: rpmhpd: Set 'active_only' for active only power domainsDouglas Anderson1-0/+2
The 'active_only' attribute was accidentally never set to true for any power domains meaning that all the code handling this attribute was dead. NOTE that the RPM power domain code (as opposed to the RPMh one) gets this right. Acked-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20190214173633.211000-1-dianders@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-07soc: samsung: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski8-8/+8
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-01-06soc: renesas: Add ARCH_R8A7795[01] for existing R-Car H3Geert Uytterhoeven1-0/+8
Despite using the same compatible values ("r8a7795"-based) because of historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, with different part numbers. Reflect this in the SoC configuration, by adding CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951 as new config symbols. These are intended to replace CONFIG_ARCH_R8A7795, and will allow making support for early SoC revisions optional. Note that for now, CONFIG_ARCH_R8A7795 is retained, and just selects CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951. This relaxes dependencies of other subsystems on the SoC configuration symbol, and provides a smooth transition path for config files through "make oldconfig". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191217183841.432-6-geert+renesas@glider.be
2020-01-06soc: renesas: rcar-rst: Fix __iomem on configure callBen Dooks (Codethink)1-1/+1
The configure call back takes a register pointer, so should have been marked with __iomem. Add this to silence the following sparse warnings: drivers/soc/renesas/rcar-rst.c:33:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces)) drivers/soc/renesas/rcar-rst.c:33:22: expected int ( *configure )( ... ) drivers/soc/renesas/rcar-rst.c:33:22: got int ( * )( ... ) drivers/soc/renesas/rcar-rst.c:97:40: warning: incorrect type in argument 1 (different address spaces) drivers/soc/renesas/rcar-rst.c:97:40: expected void *base drivers/soc/renesas/rcar-rst.c:97:40: got void [noderef] <asn:2> *[assigned] base Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191218135230.2610161-1-ben.dooks@codethink.co.uk Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig5-8/+8
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06soc: bcm: brcmstb: biuctrl: Update programming for 7211Florian Fainelli1-6/+7
Add a matching entry for 7211 which can be programmed with the same BIUCTRL settings as other Brahma-B53 based SoCs. While at it, rename the function to include a72 in the name to reflect this applies to both types of 64-bit capable CPUs that we support (Brahma-B53 and Cortex-A72). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-06soc: bcm: brcmstb: biuctrl: Update layout for A72 on 7211Florian Fainelli1-0/+8
The BIUCTRL layout is a little different on 7211 which is equipped with a Cortex-A72, account for those register offset differences. We will match 7211 specifically in a subsequent commit. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-06soc: bcm: brcmstb: biuctrl: Tune interface for 7255 and 7216Florian Fainelli1-0/+2
7255 and 7216 are some of the latest chips that were produced and support the full register range configuration for the BIU, add the two entries to get the expected programming. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-01-06soc: bcm: brcmstb: biuctrl: Tune 7260 BIU interfaceFlorian Fainelli1-2/+5
7260A0 and B0 are both supported, and 7260A0 has a small difference in that it does not support the write-back control register, which is why we have a different array of registers. Update the comment above b53_cpubiuctrl_no_wb_regs to denote that difference. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 01:33:42 +0300