summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2020-10-03scsi: fnic: Fix inconsistent format argument type in fnic_debugfs.cYe Bin1-3/+3
Fix the following warnings: [drivers/scsi/fnic/fnic_debugfs.c:123]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'int'. [drivers/scsi/fnic/fnic_debugfs.c:125]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'int'. [drivers/scsi/fnic/fnic_debugfs.c:127]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'int'. Link: https://lore.kernel.org/r/20200930021919.2832860-2-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: snic: Remove unnecessary conditionJing Xiangfeng1-4/+0
ret is always zero or error so the assignment is redundant. Link: https://lore.kernel.org/r/20200925060754.156599-1-jingxiangfeng@huawei.com Acked-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: fnic: Do not call 'scsi_done()' for unhandled commandsHannes Reinecke1-2/+1
The fnic drivers assigns an ioreq structure to each command and severs this assignment once scsi_done() has been called and the command has been completed. When traversing commands to terminate outstanding I/O we should not call scsi_done() on commands which do not have a corresponding ioreq structure; these commands have either never entered the driver or have already been completed. [mkp: fixed unused label warning] Link: https://lore.kernel.org/r/20200515112647.49260-1-hare@suse.de Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Acked-by: Satish Kharat <satishkh@cisco.com> Acked-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: ufs: Fix missing brace warning for old compilersPujin Shi1-2/+2
For older versions of gcc, the array = {0}; will cause warnings: drivers/scsi/ufs/ufshcd-crypto.c: In function 'ufshcd_crypto_keyslot_program': drivers/scsi/ufs/ufshcd-crypto.c:62:8: warning: missing braces around initializer [-Wmissing-braces] union ufs_crypto_cfg_entry cfg = { 0 }; ^ drivers/scsi/ufs/ufshcd-crypto.c:62:8: warning: (near initialization for 'cfg.reg_val') [-Wmissing-braces] drivers/scsi/ufs/ufshcd-crypto.c: In function 'ufshcd_clear_keyslot': drivers/scsi/ufs/ufshcd-crypto.c:103:8: warning: missing braces around initializer [-Wmissing-braces] union ufs_crypto_cfg_entry cfg = { 0 }; ^ 2 warnings generated Link: https://lore.kernel.org/r/20201002063538.1250-1-shipujin.t@gmail.com Fixes: 70297a8ac7a7 ("scsi: ufs: UFS crypto API") Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Pujin Shi <shipujin.t@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: qla2xxx: Fix inconsistent format argument type in qla_dbg.cYe Bin1-1/+1
Fix the following warning: [drivers/scsi/qla2xxx/qla_dbg.c:2451]: (warning) %ld in format string (no. 4) requires 'long' but the argument type is 'unsigned long'. Link: https://lore.kernel.org/r/20200930022515.2862532-4-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: qla2xxx: Fix inconsistent format argument type in qla_os.cYe Bin1-2/+2
Fix the following warnings: [drivers/scsi/qla2xxx/qla_os.c:4882]: (warning) %ld in format string (no. 2) requires 'long' but the argument type is 'unsigned long'. [drivers/scsi/qla2xxx/qla_os.c:5011]: (warning) %ld in format string (no. 1) requires 'long' but the argument type is 'unsigned long'. Link: https://lore.kernel.org/r/20200930022515.2862532-3-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: qla2xxx: Fix inconsistent format argument type in tcm_qla2xxx.cYe Bin1-1/+1
Fix the following warnings: [drivers/scsi/qla2xxx/tcm_qla2xxx.c:884]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [drivers/scsi/qla2xxx/tcm_qla2xxx.c:885]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [drivers/scsi/qla2xxx/tcm_qla2xxx.c:886]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [drivers/scsi/qla2xxx/tcm_qla2xxx.c:887]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [drivers/scsi/qla2xxx/tcm_qla2xxx.c:888]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. Link: https://lore.kernel.org/r/20200930022515.2862532-2-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: sd: Allow user to configure command retriesMike Christie2-30/+72
Some iSCSI targets went with the traditional "export N ports" approach and then allowed the initiator to multipath over them. Other targets went the opposite direction and export a single port, and then software on the target side performs load balancing and failover to other targets via an iSCSI specific feature or IP takover. The problem for the 2nd type of config is we quickly run out of our five retries and get I/O errors. In these setups we want to reduce resource use on the initiator side so we only wanted the one session and no dm-multipath. To handle traditional multipath operations like failover we do IP takover on the target side. So we would have an iSCSI target running on node1. Some monitoring software decides it's dead or the node is overloaded so it starts the iSCSI target on node2. The problem is for the failover case where we might have the equivalent of a dm-multipath temporary all paths down, or we just have to try more than 5 nodes before finding a good one. To handle this type of issue allow the user to configure the disk cmd retries from -1 to the current max of 5. -1 means infinite retries and should be used for setups where some other setting is going to control when to fail. For example iSCSI has the replacement/recovery timeout and fc (some users have used FC with NPIV and done something similar as IP takover) has dev_loss_tmo/fast_io_fail which will eventually expire and fail I/O. Link: https://lore.kernel.org/r/1601566554-26752-3-git-send-email-michael.christie@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: core: Add limitless cmd retry supportMike Christie3-20/+43
Add infinite retry support to SCSI midlayer by combining common checks for retries into some helper functions, and then checking for the -1/SCSI_CMD_RETRIES_NO_LIMIT. Link: https://lore.kernel.org/r/1601566554-26752-2-git-send-email-michael.christie@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-03scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()Coly Li1-1/+1
In iscsci driver, iscsi_tcp_segment_map() uses the following code to check whether the page should or not be handled by sendpage: if (!recv && page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg))) The "page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)" part is to make sure the page can be sent to network layer's zero copy path. This part is exactly what sendpage_ok() does. This patch uses use sendpage_ok() in iscsi_tcp_segment_map() to replace the original open coded checks. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Lee Duncan <lduncan@suse.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: Cong Wang <amwang@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Chris Leech <cleech@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03Merge tag 'scsi-fixes' of ↵Linus Torvalds1-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two patches in driver frameworks. The iscsi one corrects a bug induced by a BPF change to network locking and the other is a regression we introduced" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername() scsi: target: Fix lun lookup for TARGET_SCF_LOOKUP_LUN_FROM_TAG case
2020-09-30scsi: qla2xxx: Update version to 10.02.00.103-kNilesh Javali1-2/+2
Link: https://lore.kernel.org/r/20200929102152.32278-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: qla2xxx: Fix point-to-point (N2N) device discovery issueArun Easi3-1/+6
Driver was using a shorter timeout waiting for PLOGI from the peer in point-to-point configurations. Some devices takes some time (~4 seconds) to initiate the PLOGI. This peer initiating PLOGI is when the peer has a higher P-WWN. Increase the wait time based on N2N R_A_TOV. Link: https://lore.kernel.org/r/20200929102152.32278-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: qla2xxx: Fix crash on session cleanup with unloadQuinn Tran1-6/+7
On unload, session cleanup prematurely gave the signal for driver unload path to advance. Link: https://lore.kernel.org/r/20200929102152.32278-6-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: qla2xxx: Fix reset of MPI firmwareArun Easi4-39/+23
Normally, the MPI firmware is reset when an MPI dump is collected. If an unsaved MPI dump exists in the driver, though, an alternate mechanism is used. This mechanism, which was not fully correct, is not recommended and instead an MPI dump template walk is suggested to perform the MPI reset. To allow for the MPI dump template walk, extra space is reserved in the MPI dump buffer which gets used only when there is already an MPI dump in place. Link: https://lore.kernel.org/r/20200929102152.32278-5-njavali@marvell.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: qla2xxx: Fix MPI reset needed messageArun Easi1-1/+1
When printing the message: "MPI Heartbeat stop. MPI reset is not needed.." ..the wrong register was checked leading to always printing that MPI reset is not needed, even when it is needed. Fix the MPI reset message. Link: https://lore.kernel.org/r/20200929102152.32278-4-njavali@marvell.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: qla2xxx: Fix buffer-buffer credit extraction errorQuinn Tran5-81/+34
Current code uses wrong mailbox option to extract bbc from firmware. This field is nested inside of PLOGI payload. Extract bbc from PLOGI template payload. Link: https://lore.kernel.org/r/20200929102152.32278-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: qla2xxx: Correct the check for sscanf() return valueSaurav Kashyap1-2/+2
Since the version string has been modified, sscanf() returns 4 instead of 6. Link: https://lore.kernel.org/r/20200929102152.32278-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()Mark Mielke1-7/+15
The kernel may fail to boot or devices may fail to come up when initializing iscsi_tcp devices starting with Linux 5.8. Commit a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") introduced getpeername() within the session spinlock. Commit 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") introduced BPF_CGROUP_RUN_SA_PROG_LOCK() within getpeername(), which acquires a mutex and when used from iscsi_tcp devices can now lead to "BUG: scheduling while atomic:" and subsequent damage. Ensure that the spinlock is released before calling getpeername() or getsockname(). sock_hold() and sock_put() are used to ensure that the socket reference is preserved until after the getpeername() or getsockname() complete. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1877345 Link: https://lkml.org/lkml/2020/7/28/1085 Link: https://lkml.org/lkml/2020/8/31/459 Link: https://lore.kernel.org/r/20200928043329.606781-1-mark.mielke@gmail.com Fixes: a79af8a64d39 ("[SCSI] iscsi_tcp: use iscsi_conn_get_addr_param libiscsi function") Fixes: 1b66d253610c ("bpf: Add get{peer, sock}name attach types for sock_addr") Cc: stable@vger.kernel.org Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Mark Mielke <mark.mielke@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-30scsi: ufs: ufs-exynos: Use devm_platform_ioremap_resource_byname()Bean Huo1-7/+3
Use devm_platform_ioremap_resource_byname() to simplify the code. Link: https://lore.kernel.org/r/20200916084017.14086-1-huobean@gmail.com Acked-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-28scsi: storvsc: Support PAGE_SIZE larger than 4KBoqun Feng1-7/+49
Hyper-V always use 4k page size (HV_HYP_PAGE_SIZE), so when communicating with Hyper-V, a guest should always use HV_HYP_PAGE_SIZE as the unit for page related data. For storvsc, the data is vmbus_packet_mpb_array. And since in scsi_cmnd, sglist of pages (in unit of PAGE_SIZE) is used, we need convert pages in the sglist of scsi_cmnd into Hyper-V pages in vmbus_packet_mpb_array. This patch does the conversion by dividing pages in sglist into Hyper-V pages, offset and indexes in vmbus_packet_mpb_array are recalculated accordingly. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20200916034817.30282-12-boqun.feng@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-09-26Merge tag 'scsi-fixes' of ↵Linus Torvalds4-73/+111
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes: one in drivers (lpfc) and two for zoned block devices. The latter also impinges on the block layer but only to introduce a new block API for setting the zone model rather than fiddling with the queue directly in the zoned block driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: sd_zbc: Fix ZBC disk initialization scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
2020-09-2553c700: convert to dma_alloc_noncoherentChristoph Hellwig1-6/+14
Use the new non-coherent DMA API including proper ownership transfers. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-25sgiwd93: convert to dma_alloc_noncoherentChristoph Hellwig1-7/+7
Use the new non-coherent DMA API including proper ownership transfers. This also means we can allocate the memory as DMA_TO_DEVICE instead of bidirectional. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-2553c700: improve non-coherent DMA handlingChristoph Hellwig2-58/+72
Switch the 53c700 driver to only use non-coherent descriptor memory if it really has to because dma_alloc_coherent fails. This doesn't matter for any of the platforms it runs on currently, but that will change soon. To help with this two new helpers to transfer ownership to and from the device are added that abstract the syncing of the non-coherent memory. The two current bidirectional cases are mapped to transfers to the device, as that appears to what they are used for. Note that for parisc, which is the only architecture this driver needs to use non-coherent memory on, the direction argument of dma_cache_sync is ignored, so this will not change behavior in any way. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-24Merge branch 'for-5.10/block' into for-5.10/driversJens Axboe3-29/+24
* for-5.10/block: (140 commits) bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag bdi: invert BDI_CAP_NO_ACCT_WB bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag mm: use SWP_SYNCHRONOUS_IO more intelligently bdi: remove BDI_CAP_SYNCHRONOUS_IO bdi: remove BDI_CAP_CGROUP_WRITEBACK block: lift setting the readahead size into the block layer md: update the optimal I/O size on reshape bdi: initialize ->ra_pages and ->io_pages in bdi_init aoe: set an optimal I/O size bcache: inherit the optimal I/O size drbd: remove dead code in device_to_statistics fs: remove the unused SB_I_MULTIROOT flag block: mark blkdev_get static PM: mm: cleanup swsusp_swap_check mm: split swap_type_of PM: rewrite is_hibernate_resume_dev to not require an inode mm: cleanup claim_swapfile ocfs2: cleanup o2hb_region_dev_store dasd: cleanup dasd_scan_partitions ...
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig1-2/+2
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23scsi: ufs-mediatek: Support performance mode for inline encryption engineStanley Chu2-6/+199
Some MediaTek UFS platforms support high-performance mode that inline encryption engine can be boosted while UFS is not clock-gated. The high-performance mode will be enabled if all below conditions are well-declaired in device tree, - Proper platform-specific compatible string which enables the host capability "UFS_MTK_CAP_BOOST_CRYPT_ENGINE". - "dvfsrc-vcore" node is available in this platform. - Required minimum vcore voltage for high-performance mode. - Clock mux and clock parents of inline encryption engine for both "low-power mode" and "high-performance mode". Link: https://lore.kernel.org/r/20200914050052.3974-2-stanley.chu@mediatek.com Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: libsas: Simplify the return expression of sas_discover_* functionsLiu Shixin2-14/+2
Simplify the return expression. Link: https://lore.kernel.org/r/20200921134558.3478922-1-liushixin2@huawei.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: oak: Remove redundant initialization of variable retJing Xiangfeng1-1/+1
No point in initializing ret with -ENOMEM. Link: https://lore.kernel.org/r/20200918090747.44645-1-jingxiangfeng@huawei.com Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: bnx2i: Remove unnecessary mutex_init()Qinglang Miao1-2/+0
The mutex bnx2i_dev_lock is initialized statically. It is unnecessary to initialize by mutex_init(). Link: https://lore.kernel.org/r/20200916062133.191000-1-miaoqinglang@huawei.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Update version to 10.02.00.102-kNilesh Javali2-4/+3
Update internal driver version and remove module version macro. Link: https://lore.kernel.org/r/20200904045128.23631-14-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Add SLER and PI control supportSaurav Kashyap7-5/+45
BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15 of special feature control block for enabling SLER in FW. Set bit 8 (SLER supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_14 of special feature control block for enabling PI Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_13 for NVMe Async events. Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Add IOCB resource trackingQuinn Tran8-0/+151
This patch tracks number of IOCB resources used in the I/O fast path. If the number of used IOCBs reach a high water limit, driver would return the I/O as busy and let upper layer retry. This prevents over subscription of IOCB resources where any future error recovery command is unable to cut through. Enable IOCB throttling by default. Link: https://lore.kernel.org/r/20200904045128.23631-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Add rport fields in debugfsArun Easi1-0/+53
This patch adds rport fields in debugfs. Link: https://lore.kernel.org/r/20200904045128.23631-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Make tgt_port_database available in initiator modeArun Easi1-32/+32
tgt_port_database data is today exported only in target mode, allow it to be shown in initiator mode as well. Link: https://lore.kernel.org/r/20200904045128.23631-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Fix I/O errors during LIP reset testsArun Easi1-0/+8
In .fcp_io(), returning ENODEV as soon as remote port delete has started can cause I/O errors. Fix this by returning EBUSY until the remote port delete finishes. Link: https://lore.kernel.org/r/20200904045128.23631-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Performance tweakQuinn Tran8-39/+91
Move statistics fields from vha struct to qpair to reduce memory thrashing. Link: https://lore.kernel.org/r/20200904045128.23631-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Fix memory size truncationQuinn Tran3-6/+8
Memory size calculations for Extended Login used in hardware offload got truncated. Fix this by changing definition of exlogin_size to use uint32_t. Link: https://lore.kernel.org/r/20200904045128.23631-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Reduce duplicate code in reporting speedQuinn Tran4-137/+9
Indicate correct speed for 16G Mezz card. Link: https://lore.kernel.org/r/20200904045128.23631-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Honor status qualifier in FCP_RSP per specArun Easi3-18/+40
FCP-4 (referred FCP-4 rev-2b) identifies the earlier known "retry delay timer" field as "status qualifier", which is described in SAM-5 and later specs. This fix makes appropriate driver side modifications to honor the new definition. The SAM document referred was SAM-6 rev-5. Link: https://lore.kernel.org/r/20200904045128.23631-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Allow dev_loss_tmo setting for FC-NVMe devicesArun Easi1-0/+58
Add a remote port debugfs entry to get/set dev_loss_tmo for NVMe devices. Link: https://lore.kernel.org/r/20200904045128.23631-4-njavali@marvell.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Setup debugfs entries for remote portsArun Easi5-1/+51
Create a base for adding remote port related entries in debugfs. Link: https://lore.kernel.org/r/20200904045128.23631-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: qla2xxx: Fix I/O failures during remote port toggle testingArun Easi2-4/+1
Driver was using a lower value for dev_loss_tmo making it more prone to I/O failures during remote port toggle testing. Set dev_loss_tmo to zero during remote port registration to allow nvme-fc default dev_loss_tmo to be used, which is higher than what driver was using. Link: https://lore.kernel.org/r/20200904045128.23631-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: ibmvfc: Protect vhost->task_set increment by the host lockBrian King1-1/+1
In the discovery thread, ibmvfc does a vhost->task_set++ without any lock held. This could result in two targets getting the same cancel key, which could have strange effects in error recovery. The actual probability of this occurring should be extremely small, since this should all be done in a single threaded loop from the discovery thread, but let's fix it up anyway to be safe. Link: https://lore.kernel.org/r/1600286999-22059-1-git-send-email-brking@linux.vnet.ibm.com Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi/qla2xxx: Convert to SPDX license identifiersThomas Gleixner30-60/+30
All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Acked-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16scsi/qla4xxx: Convert to SPDX license identifiersThomas Gleixner21-42/+21
All files in this driver directory contain the following notice: See LICENSE.qla4xxx for copyright and licensing details. LICENSE.qla4xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). - The full GPLv2 license text This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla4xxx file. Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16scsi: core: Only re-run queue in scsi_end_request() if device queue is busyMing Lei1-4/+44
The request queue is currently run unconditionally in scsi_end_request() if both target queue and host queue are ready. Recently Long Li reported that cost of a queue run can be very heavy in case of high queue depth. Improve this situation by only running the request queue when this LUN is busy. Link: https://lore.kernel.org/r/20200910075056.36509-1-ming.lei@redhat.com Reported-by: Long Li <longli@microsoft.com> Tested-by: Long Li <longli@microsoft.com> Tested-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi: aic7xxx: Use kmemdup() in two placesAlex Dewar2-4/+2
kmemdup() can be used instead of kmalloc()+memcpy(). Replace two occurrences of this pattern. Issue identified with Coccinelle. Link: https://lore.kernel.org/r/20200909185855.151964-1-alex.dewar90@gmail.com Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-16scsi: virtio_scsi: Rescan the entire target on transport reset when LUN is 0Matej Genci1-1/+6
VirtIO 1.0 spec says: The removed and rescan events ... when sent for LUN 0, they MAY apply to the entire target so the driver can ask the initiator to rescan the target to detect this. This change introduces the behaviour described above by scanning the entire SCSI target when LUN is set to 0. This is both a functional and a performance fix. It aligns the driver with the spec and allows control planes to hotplug targets with large numbers of LUNs without having to request a RESCAN for each one of them. Link: https://lore.kernel.org/r/CY4PR02MB33354370E0A81E75DD9DFE74FB520@CY4PR02MB3335.namprd02.prod.outlook.com Suggested-by: Felipe Franciosi <felipe@nutanix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Matej Genci <matej.genci@nutanix.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 17:48:40 +0300