| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Do not disable preemption while taking sleeping locks. All user look safe
for migrate_diable() only.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The Host Performance Buffer feature allows UFS read commands to carry the
physical media addresses along with the LBAs, thus allowing less internal
L2P-table switches in the device. HPB1.0 allowed a single LBA, while
HPB2.0 increases this capacity up to 255 blocks.
Carrying more than a single record, the read operation is no longer purely
of type "read" but a "hybrid" command: Writing the physical address to the
device in one operation and reading back the required payload in another.
The JEDEC HPB spec defines two commands for this operation:
HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and
HPB-READ to read the payload.
With the current HPB design the UFS driver has no alternative but to divide
the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ.
This causes a great deal of aggravation to the block layer guys who
demanded that we completely revert the entire HPB driver regardless of the
huge amount of corporate effort already invested in it.
As a compromise, remove only the pieces that implement the 2.0
specification. This is done as a matter of urgency for the final 5.15
release.
Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.com
Tested-by: Avri Altman <avri.altman@wdc.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.
Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.
Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com
Fixes: b3e2c72af1d5 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
PA_PWRMODEUSERDATA0 -> DL_FC0PROTTIMEOUTVAL
PA_PWRMODEUSERDATA1 -> DL_TC0REPLAYTIMEOUTVAL
PA_PWRMODEUSERDATA2 -> DL_AFC0REQTIMEOUTVAL
Link: https://lore.kernel.org/r/20211018062841.18226-1-chanho61.park@samsung.com
Fixes: a967ddb22d94 ("scsi: ufs: ufs-exynos: Apply vendor-specific values for three timeouts")
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit a264cf5e81c7 ("scsi: ibmvfc: Fix command state accounting and stale
response detection") introduced a regression in detecting duplicate
responses. This was observed in test where a command was sent to the VIOS
and completed before ibmvfc_send_event() set the active flag to 1, which
resulted in the atomic_dec_if_positive() call in ibmvfc_handle_crq()
thinking this was a duplicate response, which resulted in scsi_done() not
getting called, so we then hit a SCSI command timeout for this command once
the timeout expires. This simply ensures the active flag gets set prior to
making the hcall to send the command to the VIOS, in order to close this
window.
Link: https://lore.kernel.org/r/20211019152129.16558-1-brking@linux.vnet.ibm.com
Fixes: a264cf5e81c7 ("scsi: ibmvfc: Fix command state accounting and stale response detection")
Cc: stable@vger.kernel.org
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Implement the ->restore() PM operation and set the link to off, which will
force a full reset and restore. This ensures that Host Performance Booster
is reset after suspend-to-disk.
The Host Performance Booster feature caches logical-to-physical mapping
information in the host memory. After suspend-to-disk, such information is
not valid, so a full reset and restore is needed.
A full reset and restore is done if the SPM level is 5 or 6, but not for
other SPM levels, so this change fixes those cases.
A full reset and restore also restores base address registers, so that code
is removed.
Link: https://lore.kernel.org/r/20211018151004.284200-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:
NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]
The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.
This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.
Link: https://lore.kernel.org/r/20211018122650.11846-1-d.bogdanov@yadro.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of
qla2x00_process_els()"), intended to change:
bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN
to:
bsg_job->request->msgcode != FC_BSG_RPT_ELS
but changed it to:
bsg_job->request->msgcode == FC_BSG_RPT_ELS
instead.
Change the == to a != to avoid leaking the fcport structure or freeing
unallocated memory.
Link: https://lore.kernel.org/r/20211012191834.90306-2-jgu@purestorage.com
Fixes: 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joy Gu <jgu@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.
Link: https://lore.kernel.org/r/1634522181-31166-1-git-send-email-zheyuma97@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for
BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), the following crash
was observed.
static int sd_resume_runtime(struct device *dev)
{
struct scsi_disk *sdkp = dev_get_drvdata(dev);
struct scsi_device *sdp = sdkp->device; // sdkp == NULL and crash
if (sdp->ignore_media_change) {
...
}
It is possible for sdkp to be NULL in sd_resume_runtime(). To fix this
crash, follow sd_resume() to test if sdkp is NULL before dereferencing it.
Crash:
[ 4.695171][ T151] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 4.696591][ T151] Mem abort info:
[ 4.697919][ T151] ESR = 0x96000005
[ 4.699692][ T151] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.701990][ T151] SET = 0, FnV = 0
[ 4.702513][ T151] EA = 0, S1PTW = 0
[ 4.704431][ T151] FSC = 0x05: level 1 translation fault
[ 4.705254][ T151] Data abort info:
[ 4.705806][ T151] ISV = 0, ISS = 0x00000005
[ 4.706484][ T151] CM = 0, WnR = 0
[ 4.707048][ T151] [0000000000000008] user address but active_mm is swapper
[ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 4.832361][ T151] Kernel Offset: 0x12acc80000 from 0xffffffc010000000
[ 4.833254][ T151] PHYS_OFFSET: 0x40000000
[ 4.833814][ T151] pstate: 80400005 (Nzcv daif +PAN -UAO)
[ 4.834546][ T151] pc : sd_resume_runtime+0x20/0x14c
[ 4.835227][ T151] lr : scsi_runtime_resume+0x84/0xe4
[ 4.835916][ T151] sp : ffffffc0110db8d0
[ 4.836450][ T151] x29: ffffffc0110db8d0 x28: 0000000000000001
[ 4.837258][ T151] x27: ffffff80c0bd1ac0 x26: ffffff80c0bd1ad0
[ 4.838063][ T151] x25: ffffff80cea7e448 x24: ffffffd2bf961000
[ 4.838867][ T151] x23: ffffffd2be69f838 x22: ffffffd2bd9dfb4c
[ 4.839670][ T151] x21: 0000000000000000 x20: ffffff80cea7e000
[ 4.840474][ T151] x19: ffffff80cea7e260 x18: ffffffc0110dd078
[ 4.841277][ T151] x17: 00000000658783d9 x16: 0000000051469dac
[ 4.842081][ T151] x15: 00000000b87f6327 x14: 0000000068fd680d
[ 4.842885][ T151] x13: ffffff80c0bd2470 x12: ffffffd2bfa7f5f0
[ 4.843688][ T151] x11: 0000000000000078 x10: 0000000000000001
[ 4.844492][ T151] x9 : 00000000000000b1 x8 : ffffffd2be69f88c
[ 4.845295][ T151] x7 : ffffffd2bd9e0e5c x6 : 0000000000000000
[ 4.846099][ T151] x5 : 0000000000000080 x4 : 0000000000000001
[ 4.846902][ T151] x3 : 68fd680dfe4ebe5e x2 : 0000000000000003
[ 4.847706][ T151] x1 : ffffffd2bf7f9380 x0 : ffffff80cea7e260
[ 4.856708][ T151] die+0x16c/0x59c
[ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210
[ 4.857833][ T151] do_page_fault+0xa4/0x654
[ 4.858418][ T151] do_translation_fault+0x6c/0x1b0
[ 4.859083][ T151] do_mem_abort+0x68/0x10c
[ 4.859655][ T151] el1_abort+0x40/0x64
[ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88
[ 4.860834][ T151] el1h_64_sync+0x7c/0x80
[ 4.861395][ T151] sd_resume_runtime+0x20/0x14c
[ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4
[ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc
[ 4.863275][ T151] rpm_resume+0x7e8/0xaa4
[ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110
[ 4.864489][ T151] sd_probe+0x30/0x428
[ 4.865016][ T151] really_probe+0x14c/0x500
[ 4.865602][ T151] __driver_probe_device+0xb4/0x18c
[ 4.866278][ T151] driver_probe_device+0x60/0x2c4
[ 4.866931][ T151] __device_attach_driver+0x228/0x2bc
[ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c
[ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4
[ 4.869038][ T151] process_one_work+0x3ac/0x590
[ 4.869670][ T151] worker_thread+0x320/0x758
[ 4.870265][ T151] kthread+0x2e8/0x35c
[ 4.870792][ T151] ret_from_fork+0x10/0x20
Link: https://lore.kernel.org/r/20211015074654.19615-1-miles.chen@mediatek.com
Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()")
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When scanning devices through the 'scan' attribute in sysfs, the user will
observe duplicate device entries in lsscsi command output.
Set the shost's max_channel to zero to avoid this.
Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com
Fixes: 824a156633df ("scsi: mpi3mr: Base driver code")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SCSI host release is triggered when SCSI device is freed. We have to make
sure that the low-level device driver module won't be unloaded before SCSI
host instance is released because shost->hostt is required in the release
handler.
Make sure to put LLD module refcnt after SCSI device is released.
Fixes a kernel panic of 'BUG: unable to handle page fault for address'
reported by Changhui and Yi.
Link: https://lore.kernel.org/r/20211008050118.1440686-1-ming.lei@redhat.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Changhui Zhong <czhong@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The validation on the length of incoming packets performed in
storvsc_on_channel_callback() does not apply to unsolicited packets with ID
of 0 sent by Hyper-V. Adjust the validation for such unsolicited packets.
Link: https://lore.kernel.org/r/20211007122828.469289-1-parri.andrea@gmail.com
Fixes: 91b1b640b834b2 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") we meant to add a check where before we call ->set_param() we
make sure the iscsi_cls_connection is bound. The problem is that between
versions 4 and 5 of the patch the deletion of the unchecked set_param()
call was dropped so we ended up with 2 calls. As a result we can still hit
a crash where we access the unbound connection on the first call.
This patch removes that first call.
Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Li Feng <fengli@smartx.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After commit ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at
can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the
hv_storvsc driver sets scsi_driver.can_queue to an integer value that
exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets
shost->cmd_per_lun to a negative "short" value.
Use min_t(int, ...) to work around the issue.
Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com
Fixes: ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit d39df158518c ("scsi: iscsi: Have abort handler get ref to conn")
added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but
then also changed the handling of the case where we detect an already
completed task where we now end up doing a goto to the common put/cleanup
code. This results in a iscsi_task use after free, because the common
cleanup code will do a put on the iscsi_task.
This reverts the goto and moves the iscsi_get_conn() to after we've checked
if the iscsi_task is valid.
Link: https://lore.kernel.org/r/20211004210608.9962-1-michael.christie@oracle.com
Fixes: d39df158518c ("scsi: iscsi: Have abort handler get ref to conn")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When an FC-GS I/O is aborted by lpfc, the driver requires a node pointer
for a dereference operation. In the abort I/O routine, the driver miscasts
a context pointer to the wrong data type and overwrites a single byte
outside of the allocated space. This miscast is done in the abort I/O
function handler because the handler works on both FC-GS and FC-LS
commands. However, the code neglected to get the correct job location for
the node.
Fix this by acquiring the necessary node pointer from the correct job
structure depending on the I/O type.
Link: https://lore.kernel.org/r/20211004231210.35524-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It's not holding the lock at this stage and the IRQ "flags" are not correct
so it would restore something bogus. Delete the unlock statement.
Link: https://lore.kernel.org/r/20211004103851.GE25015@kili
Fixes: 3e6414003bf9 ("scsi: elx: efct: SCSI I/O handling routines")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UFS driver uses blk_mq_tagset_busy_iter() when identifying task
management requests to complete, however blk_mq_tagset_busy_iter() doesn't
work.
blk_mq_tagset_busy_iter() only iterates requests dispatched by the block
layer. That appears as if it might have started since commit 37f4a24c2469
("blk-mq: centralise related handling into blk_mq_get_driver_tag") which
removed 'data->hctx->tags->rqs[rq->tag] = rq' from blk_mq_rq_ctx_init()
which gets called:
blk_get_request
blk_mq_alloc_request
__blk_mq_alloc_request
blk_mq_rq_ctx_init
Since UFS task management requests are not dispatched by the block layer,
hctx->tags->rqs[rq->tag] remains NULL, and since blk_mq_tagset_busy_iter()
relies on finding requests using hctx->tags->rqs[rq->tag], UFS task
management requests are never found by blk_mq_tagset_busy_iter().
By using blk_mq_tagset_busy_iter(), the UFS driver was relying on internal
details of the block layer, which was fragile and subsequently got
broken. Fix by removing the use of blk_mq_tagset_busy_iter() and having the
driver keep track of task management requests.
Link: https://lore.kernel.org/r/20210922091059.4040-1-adrian.hunter@intel.com
Fixes: 1235fc569e0b ("scsi: ufs: core: Fix task management request completion timeout")
Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs")
Cc: stable@vger.kernel.org
Tested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 756fb6a895af ("scsi: acornscsi: Remove tagged queuing vestiges")
mistakenly introduced a reference to function scsi_cmd_to_tag(). This
function does not exist as it was removed from an earlier series version
when I upstreamed the named commit - originally authored By Hannes - but
this reference still remained.
Fix by replacing the reference to scsi_cmd_to_tag() with
scsi_cmd_to_rq(scsi_scmd)->tag, which scsi_cmd_to_tag() was a wrapper for.
Link: https://lore.kernel.org/r/1633002717-79765-1-git-send-email-john.garry@huawei.com
Fixes: 756fb6a895af ("scsi: acornscsi: Remove tagged queuing vestiges")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.
When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.
Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.
Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Disable default logging of some I/O path messages. If desired, the messages
can be turned back on by setting ql2xextended_error_logging.
Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.
Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following coccicheck warning:
./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.
Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace().
Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com
Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs")
Cc: stable@vger.kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Hsu <jonathan.hsu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Setting SCSI logging level with error=3, we saw some errors from enclosues:
[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13
Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).
Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I fixed a stringop-overread warning earlier this year, now a second copy of
the original code was added and the warning came back:
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_cmf_info_show':
drivers/scsi/lpfc/lpfc_attr.c:289:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread]
289 | strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix it the same way as the other copy.
Link: https://lore.kernel.org/r/20210920095628.1191676-1-arnd@kernel.org
Fixes: ada48ba70f6b ("scsi: lpfc: Fix gcc -Wstringop-overread warning")
Fixes: 74a7baa2a3ee ("scsi: lpfc: Add cmf_info sysfs entry")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE". We're not
going to hit the limit so this fix will not affect runtime.
Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22cc5 ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This scnprintf() uses the wrong limit. It should be
"LPFC_FPIN_WWPN_LINE_SZ - len" instead of LPFC_FPIN_WWPN_LINE_SZ.
Link: https://lore.kernel.org/r/20210916132251.GD25094@kili
Fixes: 428569e66fa7 ("scsi: lpfc: Expand FPIN and RDF receive logging")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The acornscsi driver has a config option to enable tagged queuing, but this
option gets disabled in the driver itself with the comment 'needs to be
debugged'. As this is a _really_ old driver I doubt anyone will be wanting
to invest time here, so remove the tagged queue vestiges and make our lives
easier.
[jpg: Use scsi_cmd_to_rq()]
Link: https://lore.kernel.org/r/1631696835-136198-3-git-send-email-john.garry@huawei.com
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver is attempting to allocate a tag internally which is a no-go with
blk-mq. Switch the driver to use the request tag and kill usage of
scmd->tag and scmd->device->current_tag.
[jpg: Change to use scsi_cmd_to_rq()]
Link: https://lore.kernel.org/r/1631696835-136198-2-git-send-email-john.garry@huawei.com
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.
Fix restoring initiator mode after disabling target in dual mode.
Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A command tag is passed as the second argument of the
__ufshcd_transfer_req_compl() call in ufshcd_eh_device_reset_handler()
instead of a bitmask. Fix this by passing a bitmask as argument instead of
a command tag.
Link: https://lore.kernel.org/r/20210916175408.2260084-1-bvanassche@acm.org
Fixes: a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths")
Cc: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch addresses the following Coverity report about the zno *
sdkp->zone_blocks expression:
CID 1475514 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
overflow_before_widen: Potentially overflowing expression zno *
sdkp->zone_blocks with type unsigned int (32 bits, unsigned) is evaluated
using 32-bit arithmetic, and then used in a context that expects an
expression of type sector_t (64 bits, unsigned).
Link: https://lore.kernel.org/r/20210917212314.2362324-1-bvanassche@acm.org
Fixes: 5795eb443060 ("scsi: sd_zbc: emulate ZONE_APPEND commands")
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit a113eaaf86373362b053279049907ff82b5df6c8.
There are a couple of issues with the commit:
1. It causes deadlocks.
2. It causes the shost->eh_cmd_q list of failed requests not to be
processed, ever.
So revert it.
1. Deadlocks
The SCSI error handler runs with requests blocked beginning when
scsi_schedule_eh() sets SHOST_RECOVERY state, continuing through
scsi_error_handler() callback ->eh_strategy_handler() until
scsi_restart_operations() is called. By setting eh_strategy_handler to
ufshcd_err_handler, the patch changed the UFS error handler to run with
requests blocked, including PM requests, for the entire run of the error
handler.
That conflicts with UFS error handler existing synchronization with UFS
device PM operations. The UFS error handler synchronizes with runtime PM
by doing pm_runtime_get_sync() prior to blocking requests itself. It
synchronizes with system PM by use of hba->host_sem, again before blocking
requests itself. However, if requests are already blocked, then PM
operations will block. So:
the UFS error handler blocks waiting on PM
+ PM blocks waiting on SCSI PM requests to process or fail
+ PM requests are blocked waiting on error handling to finish
= deadlock
This happens both for runtime PM and system PM.
Prior to the patch, these deadlocks could not happen even if SCSI error
handling was running, because the presence of requests in shost->eh_cmd_q
would mean the queues could not be suspended, which would mean that, should
the UFS error handler run at the same time, it would not need to wait for
PM or vice versa.
Please note these scenarios are not just theoretical, they were found
during testing on a Samsung Galaxy Book S.
2. ->eh_strategy_handler() must process shost->eh_cmd_q list of failed
requests, as all other eh_strategy_handler's do except UFS error handler.
Refer for example: scsi_unjam_host(), ata_scsi_error() and
sas_scsi_recover_host().
Link: https://lore.kernel.org/r/20210917144349.14058-1-adrian.hunter@intel.com
Fixes: a113eaaf8637 ("scsi: ufs: Synchronize SCSI and UFS error handling")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sd_spinup_disk() is a little bit noisy after commit 848ade90ba9c ("scsi:
sd: Do not exit sd_spinup_disk() quietly"):
scsi 0:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Media removed, stopped polling
sd 0:0:0:0: [sda] Media removed, stopped polling
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: [sda] Media removed, stopped polling
There's not really a benefit in printing the same message multiple
times. Therefore print it only if media_present was previously set.
Link: https://lore.kernel.org/r/a2d0a249-6035-9697-626a-e14ec50ef6ee@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Intel LKF can experience link errors. Make fixes to increase link
stability, especially when switching to high speed modes.
Link: https://lore.kernel.org/r/20210831145317.26306-1-adrian.hunter@intel.com
Fixes: b2c57925df1f ("scsi: ufs: ufs-pci: Add support for Intel LKF")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are a couple of statements where the indentation is not correct,
clean these up. Remove a redundant break statement.
Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are a few statements where the indentation is not correct, clean
these up.
Link: https://lore.kernel.org/r/20210902223643.56979-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a spelling mistake in a literal string. Fix it.
Link: https://lore.kernel.org/r/20210826115714.11844-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
WARNING !A || A && B is equivalent to !A || B
This issue was detected with the help of Coccinelle.
Link: https://lore.kernel.org/r/20210820030805.12383-1-jing.yangyang@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Drop retrieve_from_waiting_list() to avoid this warning:
drivers/scsi/ncr53c8xx.c:8000:26: warning: ‘retrieve_from_waiting_list’
defined but not used [-Wunused-function]
Link: https://lore.kernel.org/r/YTfS/LH5vCN6afDW@ls3530
Fixes: 1c22e327545c ("scsi: ncr53c8xx: Remove unused code")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Smatch checker reported the following error:
drivers/base/power/sysfs.c:833 dpm_sysfs_remove()
warn: sleeping in atomic context
With a calling sequence of:
efct_lio_npiv_drop_nport() <- disables preempt
-> fc_vport_terminate()
-> device_del()
-> dpm_sysfs_remove()
Issue is efct_lio_npiv_drop_nport() is making the fc_vport_terminate() call
while holding a lock w/ ipl raised.
It is unnecessary to hold the lock over this call, shift where the lock is
taken.
Link: https://lore.kernel.org/r/20210907165225.10821-1-jsmart2021@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Reporting zones on a SCSI device sometimes fail with the following error:
[76248.516390] ata16.00: invalid transfer count 131328
[76248.523618] sd 15:0:0:0: [sda] REPORT ZONES start lba 536870912 failed
The error (from drivers/ata/libata-scsi.c:ata_scsi_zbc_in_xlat()) indicates
that buffer size is not aligned to SECTOR_SIZE.
This happens when the __vmalloc() failed. Consider we are reporting 4096
zones, then we will have "bufsize = roundup((4096 + 1) * 64,
SECTOR_SIZE)" = (513 * 512) = 262656. Then, __vmalloc() failure halves
the bufsize to 131328, which is no longer aligned to SECTOR_SIZE.
Use rounddown() to ensure the size is always aligned to SECTOR_SIZE and fix
the comment as well.
Link: https://lore.kernel.org/r/20210906140642.2267569-1-naohiro.aota@wdc.com
Fixes: 23a50861adda ("scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()")
Cc: stable@vger.kernel.org # 5.5+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Call cpu_relax() while waiting for the current blk-mq polling instance to
complete.
Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of
iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call
into the driver, we might not match and return that we don't want attr
visible in sysfs. Found in code review.
Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com
Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The following parameters are not used in the function. Remove them.
*func(): ufshpb_set_hpb_read_to_upiu
-> struct ufshpb_lu *hpb
-> u32 lpn
Link: https://lore.kernel.org/r/20210901025617.31174-1-cw9316.lee@samsung.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following coccicheck REVIEW:
./drivers/scsi/lpfc/lpfc_scsi.c:1498:9-12 REVIEW Unneeded variable
Link: https://lore.kernel.org/r/20210831114058.17817-1-lv.ruyi@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cm>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Chi Minghao <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The Kernel test robot flagged the following warning:
".../lpfc_init.c:7788:35: error: 'struct lpfc_sli4_hba' has no member
named 'c_stat'"
Reviewing this issue highlighted that one of the recent patches caused the
driver to no longer compile cleanly if CONFIG_DEBUG_FS is not set.
Correct the different areas that are failing to compile.
Link: https://lore.kernel.org/r/20210908050927.37275-1-jsmart2021@gmail.com
Fixes: 02243836ad6f ("scsi: lpfc: Add support for the CM framework")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
