summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2021-09-03scsi: core: Fix hang of freezing queue between blocking and running deviceLi Jinlin1-3/+6
commit 02c6dcd543f8f051973ee18bfbc4dc3bd595c558 upstream. We found a hang, the steps to reproduce are as follows: 1. blocking device via scsi_device_set_state() 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo none > /sys/block/sda/queue/scheduler 4. echo "running" >/sys/block/sda/device/state Step 3 and 4 should complete after step 4, but they hang. CPU#0 CPU#1 CPU#2 --------------- ---------------- ---------------- Step 1: blocking device Step 2: dd xxxx ^^^^^^ get request q_usage_counter++ Step 3: switching scheculer elv_iosched_store elevator_switch blk_mq_freeze_queue blk_freeze_queue > blk_freeze_queue_start ^^^^^^ mq_freeze_depth++ > blk_mq_run_hw_queues ^^^^^^ can't run queue when dev blocked > blk_mq_freeze_queue_wait ^^^^^^ Hang here!!! wait q_usage_counter==0 Step 4: running device store_state_field scsi_rescan_device scsi_attach_vpd scsi_vpd_inquiry __scsi_execute blk_get_request blk_mq_alloc_request blk_queue_enter ^^^^^^ Hang here!!! wait mq_freeze_depth==0 blk_mq_run_hw_queues ^^^^^^ dispatch IO, q_usage_counter will reduce to zero blk_mq_unfreeze_queue ^^^^^ mq_freeze_depth-- To fix this, we need to run queue before rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26scsi: core: Fix capacity set to zero after offlinining devicelijinlin1-3/+6
[ Upstream commit f0f82e2476f6adb9c7a0135cfab8091456990c99 ] After adding physical volumes to a volume group through vgextend, the kernel will rescan the partitions. This in turn will cause the device capacity to be queried. If the device status is set to offline through sysfs at this time, READ CAPACITY command will return a result which the host byte is DID_NO_CONNECT, and the capacity of the device will be set to zero in read_capacity_error(). After setting device status back to running, the capacity of the device will remain stuck at zero. Fix this issue by rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210727034455.1494960-1-lijinlin3@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: lijinlin <lijinlin3@huawei.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26scsi: core: Avoid printing an error if target_alloc() returns -ENXIOSreekanth Reddy1-1/+2
[ Upstream commit 70edd2e6f652f67d854981fd67f9ad0f1deaea92 ] Avoid printing a 'target allocation failed' error if the driver target_alloc() callback function returns -ENXIO. This return value indicates that the corresponding H:C:T:L entry is empty. Removing this error reduces the scan time if the user issues SCAN_WILD_CARD scan operation through sysfs parameter on a host with a lot of empty H:C:T:L entries. Avoiding the printk on -ENXIO matches the behavior of the other callback functions during scanning. Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()Ye Bin1-2/+2
[ Upstream commit bc546c0c9abb3bb2fb46866b3d1e6ade9695a5f6 ] The following BUG_ON() was observed during RDAC scan: [595952.944297] kernel BUG at drivers/scsi/device_handler/scsi_dh_rdac.c:427! [595952.951143] Internal error: Oops - BUG: 0 [#1] SMP ...... [595953.251065] Call trace: [595953.259054] check_ownership+0xb0/0x118 [595953.269794] rdac_bus_attach+0x1f0/0x4b0 [595953.273787] scsi_dh_handler_attach+0x3c/0xe8 [595953.278211] scsi_dh_add_device+0xc4/0xe8 [595953.282291] scsi_sysfs_add_sdev+0x8c/0x2a8 [595953.286544] scsi_probe_and_add_lun+0x9fc/0xd00 [595953.291142] __scsi_scan_target+0x598/0x630 [595953.295395] scsi_scan_target+0x120/0x130 [595953.299481] fc_user_scan+0x1a0/0x1c0 [scsi_transport_fc] [595953.304944] store_scan+0xb0/0x108 [595953.308420] dev_attr_store+0x44/0x60 [595953.312160] sysfs_kf_write+0x58/0x80 [595953.315893] kernfs_fop_write+0xe8/0x1f0 [595953.319888] __vfs_write+0x60/0x190 [595953.323448] vfs_write+0xac/0x1c0 [595953.326836] ksys_write+0x74/0xf0 [595953.330221] __arm64_sys_write+0x24/0x30 Code is in check_ownership: list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) { /* h->sdev should always be valid */ BUG_ON(!tmp->sdev); tmp->sdev->access_state = access_state; } rdac_bus_attach initialize_controller list_add_rcu(&h->node, &h->ctlr->dh_list); h->sdev = sdev; rdac_bus_detach list_del_rcu(&h->node); h->sdev = NULL; Fix the race between rdac_bus_attach() and rdac_bus_detach() where h->sdev is NULL when processing the RDAC attach. Link: https://lore.kernel.org/r/20210113063103.2698953-1-yebin10@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()Harshvardhan Jha1-6/+15
[ Upstream commit 77541f78eadfe9fdb018a7b8b69f0f2af2cf4b82 ] The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash. Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26scsi: pm80xx: Fix TMF task completion race conditionIgor Pylypiv1-17/+15
[ Upstream commit d712d3fb484b7fa8d1d57e9ca6f134bb9d8c18b1 ] The TMF timeout timer may trigger at the same time when the response from a controller is being handled. When this happens the SAS task may get freed before the response processing is finished. Fix this by calling complete() only when SAS_TASK_STATE_DONE is not set. A similar race condition was fixed in commit b90cd6f2b905 ("scsi: libsas: fix a race condition when smp task timeout") Link: https://lore.kernel.org/r/20210707185945.35559-1-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18scsi: lpfc: Move initialization of phba->poll_list earlier to avoid crashEwan D. Milne1-1/+2
commit 9977d880f7a3c233db9165a75a3a14defc2a4aee upstream. The phba->poll_list is traversed in case of an error in lpfc_sli4_hba_setup(), so it must be initialized earlier in case the error path is taken. [ 490.030738] lpfc 0000:65:00.0: 0:1413 Failed to init iocb list. [ 490.036661] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 490.044485] PGD 0 P4D 0 [ 490.047027] Oops: 0000 [#1] SMP PTI [ 490.050518] CPU: 0 PID: 7 Comm: kworker/0:1 Kdump: loaded Tainted: G I --------- - - 4.18. [ 490.060511] Hardware name: Dell Inc. PowerEdge R440/0WKGTH, BIOS 1.4.8 05/22/2018 [ 490.067994] Workqueue: events work_for_cpu_fn [ 490.072371] RIP: 0010:lpfc_sli4_cleanup_poll_list+0x20/0xb0 [lpfc] [ 490.078546] Code: cf e9 04 f7 fe ff 0f 1f 40 00 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 4d 8d a79 [ 490.097291] RSP: 0018:ffffbd1a463dbcc8 EFLAGS: 00010246 [ 490.102518] RAX: 0000000000008200 RBX: ffff945cdb8c0000 RCX: 0000000000000000 [ 490.109649] RDX: 0000000000018200 RSI: ffff9468d0e16818 RDI: 0000000000000000 [ 490.116783] RBP: ffff945cdb8c1740 R08: 00000000000015c5 R09: 0000000000000042 [ 490.123915] R10: 0000000000000000 R11: ffffbd1a463dbab0 R12: ffff945cdb8c25c0 [ 490.131049] R13: 00000000fffffff4 R14: 0000000000001800 R15: ffff945cdb8c0000 [ 490.138182] FS: 0000000000000000(0000) GS:ffff9468d0e00000(0000) knlGS:0000000000000000 [ 490.146267] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 490.152013] CR2: 0000000000000000 CR3: 000000042ca10002 CR4: 00000000007706f0 [ 490.159146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 490.166277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 490.173409] PKRU: 55555554 [ 490.176123] Call Trace: [ 490.178598] lpfc_sli4_queue_destroy+0x7f/0x3c0 [lpfc] [ 490.183745] lpfc_sli4_hba_setup+0x1bc7/0x23e0 [lpfc] [ 490.188797] ? kernfs_activate+0x63/0x80 [ 490.192721] ? kernfs_add_one+0xe7/0x130 [ 490.196647] ? __kernfs_create_file+0x80/0xb0 [ 490.201020] ? lpfc_pci_probe_one_s4.isra.48+0x46f/0x9e0 [lpfc] [ 490.206944] lpfc_pci_probe_one_s4.isra.48+0x46f/0x9e0 [lpfc] [ 490.212697] lpfc_pci_probe_one+0x179/0xb70 [lpfc] [ 490.217492] local_pci_probe+0x41/0x90 [ 490.221246] work_for_cpu_fn+0x16/0x20 [ 490.224994] process_one_work+0x1a7/0x360 [ 490.229009] ? create_worker+0x1a0/0x1a0 [ 490.232933] worker_thread+0x1cf/0x390 [ 490.236687] ? create_worker+0x1a0/0x1a0 [ 490.240612] kthread+0x116/0x130 [ 490.243846] ? kthread_flush_work_fn+0x10/0x10 [ 490.248293] ret_from_fork+0x35/0x40 [ 490.251869] Modules linked in: lpfc(+) xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4i [ 490.332609] CR2: 0000000000000000 Link: https://lore.kernel.org/r/20210809150947.18104-1-emilne@redhat.com Fixes: 93a4d6f40198 ("scsi: lpfc: Add registration for CPU Offline/Online events") Cc: stable@vger.kernel.org Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12scsi: ibmvfc: Fix command state accounting and stale response detectionTyrel Datwyler2-2/+18
commit a264cf5e81c78e2b9918b8b9ef2ace9dde1850df upstream. Prior to commit 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock") responses to commands were completed sequentially with the host lock held such that a command had a basic binary state of active or free. It was therefore a simple affair of ensuring the assocaiated ibmvfc_event to a VIOS response was valid by testing that it was not already free. The lock relexation work to complete commands outside the lock inadverdently made it a trinary command state such that a command is either in flight, received and being completed, or completed and now free. This breaks the stale command detection logic as a command may be still marked active and been placed on the delayed completion list when a second stale response for the same command arrives. This can lead to double completions and list corruption. This issue was exposed by a recent VIOS regression were a missing memory barrier could occasionally result in the ibmvfc client receiving a duplicate response for the same command. Fix the issue by introducing the atomic ibmvfc_event.active to track the trinary state of a command. The state is explicitly set to 1 when a command is successfully sent. The CRQ response handlers use atomic_dec_if_positive() to test for stale responses and correctly transition to the completion state when a active command is received. Finally, atomic_dec_and_test() is used to sanity check transistions when commands are freed as a result of a completion, or moved to the purge list as a result of error handling or adapter reset. Link: https://lore.kernel.org/r/20210716205220.1101150-1-tyreld@linux.ibm.com Fixes: 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock") Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12scsi: sr: Return correct event when media event code is 3Li Manyi1-1/+1
[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ] Media event code 3 is defined in the MMC-6 spec as follows: "MediaRemoval: The media has been removed from the specified slot, and the Drive is unable to access the media without user intervention. This applies to media changers only." This indicated that treating the condition as an EJECT_REQUEST was appropriate. However, doing so had the unfortunate side-effect of causing the drive tray to be physically ejected on resume. Instead treat the event as a MEDIA_CHANGE request. Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759 Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com Signed-off-by: Li Manyi <limanyi@uniontech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28scsi: iscsi: Fix iface sysfs attr detectionMike Christie1-56/+34
[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ] A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: qedf: Add check to synchronize abort and flushJaved Hasan1-1/+21
[ Upstream commit df99446d5c2a63dc6e6920c8090da0e9da6539d5 ] A race condition was observed between qedf_cleanup_fcport() and qedf_process_error_detect()->qedf_initiate_abts(): [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0 [2069091.233420] Oops: 0000 [#1] SMP [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P OE ------------ 3.10.0-1160.25.1.el7.x86_64 #1 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf] [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>] [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf] [2069091.443666] RSP: 0018:ffff9bacaef9fdb8 EFLAGS: 00010246 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040 [2069091.529472] FS: 0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000 [2069091.543926] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2069091.602007] PKRU: 00000000 [2069091.616010] Call Trace: [2069091.629902] [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf] [2069091.643941] [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf] [2069091.657948] [<ffffffff85ebddcf>] process_one_work+0x17f/0x440 [2069091.672111] [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0 [2069091.686057] [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0 [2069091.700033] [<ffffffff85ec5da1>] kthread+0xd1/0xe0 [2069091.713891] [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40 Add check in qedf_process_error_detect(). When flush is active, let the cmds be completed from the cleanup contex. Link: https://lore.kernel.org/r/20210624171802.598-1-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: libfc: Fix array index out of bound exceptionJaved Hasan1-5/+8
[ Upstream commit b27c4577557045f1ab3cdfeabfc7f3cd24aca1fe ] Fix array index out of bound exception in fc_rport_prli_resp(). Link: https://lore.kernel.org/r/20210615165939.24327-1-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: libsas: Add LUN number check in .slave_alloc callbackYufen Yu8-0/+16
[ Upstream commit 49da96d77938db21864dae6b7736b71e96c1d203 ] Offlining a SATA device connected to a hisi SAS controller and then scanning the host will result in detecting 255 non-existent devices: # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc # echo "offline" > /sys/block/sdb/device/state # echo "- - -" > /sys/class/scsi_host/host2/scan # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh ... [2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb After a REPORT LUN command issued to the offline device fails, the SCSI midlayer tries to do a sequential scan of all devices whose LUN number is not 0. However, SATA does not support LUN numbers at all. Introduce a generic sas_slave_alloc() handler which will return -ENXIO for SATA devices if the requested LUN number is larger than 0 and make libsas drivers use this function as their .slave_alloc callback. Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com Reported-by: Wu Bo <wubo40@huawei.com> Suggested-by: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-25scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8Colin Ian King1-1/+1
[ Upstream commit 332a9dd1d86f1e7203fc7f0fd7e82f0b304200fe ] The shifting of the u8 integer returned fom ahc_inb(ahc, port+3) by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a u64. In the event that the top bit of the u8 is set then all then all the upper 32 bits of the u64 end up as also being set because of the sign-extension. Fix this by casting the u8 values to a u64 before the 24 bit left shift. [ This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git, commit f58eb66c0b0a ("Update aic7xxx driver to 6.2.10...") ] Link: https://lore.kernel.org/r/20210621151727.20667-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unintended sign extension") Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: scsi_dh_alua: Fix signedness bug in alua_rtpg()Dan Carpenter1-1/+2
commit 80927822e8b6be46f488524cd7d5fe683de97fc4 upstream. The "retval" variable needs to be signed for the error handling to work. Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda Fixes: 7e26e3ea0287 ("scsi: scsi_dh_alua: Check for negative result value") Reviewed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()Christophe JAILLET1-0/+1
[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ] If an error occurs after a pci_enable_pcie_error_reporting() call, it must be undone by a corresponding pci_disable_pcie_error_reporting() call, as already done in the remove function. Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr Fixes: 3567f36a09d1 ("[SCSI] be2iscsi: Fix AER handling in driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: storvsc: Correctly handle multiple flags in srb_statusMichael Kelley1-28/+33
[ Upstream commit 52e1b3b3daa9d53f0204bf474ee1d4b1beb38234 ] Hyper-V is observed to sometimes set multiple flags in the srb_status, such as ABORTED and ERROR. Current code in storvsc_handle_error() handles only a single flag being set, and does nothing when multiple flags are set. Fix this by changing the case statement into a series of "if" statements testing individual flags. The functionality for handling each flag is unchanged. Link: https://lore.kernel.org/r/1622827263-12516-3-git-send-email-mikelley@microsoft.com Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: qedi: Fix cleanup session block/unblock useMike Christie2-2/+16
[ Upstream commit 0c72191da68638a479602dd515b587ada913184a ] Drivers shouldn't be calling block/unblock session for cmd cleanup because the functions can change the session state from under libiscsi. This adds a new a driver level bit so it can block all I/O the host while it drains the card. Link: https://lore.kernel.org/r/20210525181821.7617-26-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: qedi: Fix TMF session block/unblock useMike Christie1-6/+1
[ Upstream commit 2819b4ae2873d50fd55292877b0231ec936c3b2e ] Drivers shouldn't be calling block/unblock session for tmf handling because the functions can change the session state from under libiscsi. iscsi_queuecommand's call to iscsi_prep_scsi_cmd_pdu-> iscsi_check_tmf_restrictions will prevent new cmds from being sent to qedi after we've started handling a TMF. So we don't need to try and block it in the driver, and we can remove these block calls. Link: https://lore.kernel.org/r/20210525181821.7617-25-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: qedi: Fix race during abort timeoutsMike Christie2-18/+17
[ Upstream commit 2ce002366a3fcc3f9616d4583194f65dde0ad253 ] If the SCSI cmd completes after qedi_tmf_work calls iscsi_itt_to_task then the qedi qedi_cmd->task_id could be freed and used for another cmd. If we then call qedi_iscsi_cleanup_task with that task_id we will be cleaning up the wrong cmd. Wait to release the task_id until the last put has been done on the iscsi_task. Because libiscsi grabs a ref to the task when sending the abort, we know that for the non-abort timeout case that the task_id we are referencing is for the cmd that was supposed to be aborted. A latter commit will fix the case where the abort times out while we are running qedi_tmf_work. Link: https://lore.kernel.org/r/20210525181821.7617-21-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: qedi: Fix null ref during abort handlingMike Christie1-1/+1
[ Upstream commit 5777b7f0f03ce49372203b6521631f62f2810c8f ] If qedi_process_cmd_cleanup_resp finds the cmd it frees the work and sets list_tmf_work to NULL, so qedi_tmf_work should check if list_tmf_work is non-NULL when it wants to force cleanup. Link: https://lore.kernel.org/r/20210525181821.7617-20-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Fix shost->max_id useMike Christie4-6/+6
[ Upstream commit bdd4aad7ff92ae39c2e93c415bb6761cb8b584da ] The iscsi offload drivers are setting the shost->max_id to the max number of sessions they support. The problem is that max_id is not the max number of targets but the highest identifier the targets can have. To use it to limit the number of targets we need to set it to max sessions - 1, or we can end up with a session we might not have preallocated resources for. Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Fix conn use after free during resetsMike Christie1-60/+55
[ Upstream commit ec29d0ac29be366450a7faffbcf8cba3a6a3b506 ] If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session. Link: https://lore.kernel.org/r/20210525181821.7617-14-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: iscsi: Add iscsi_cls_conn refcount helpersMike Christie2-5/+14
[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ] There are a couple places where we could free the iscsi_cls_conn while it's still in use. This adds some helpers to get/put a refcount on the struct and converts an exiting user. Subsequent commits will then use the helpers to fix 2 bugs in the eh code. Link: https://lore.kernel.org/r/20210525181821.7617-11-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQsChandrakanth Patil1-2/+7
[ Upstream commit 9bedd36e9146b34dda4d6994e3aa1d72bc6442c1 ] While reenabling the IRQ after IRQ poll there may be a small window for the firmware to post the replies with interrupts raised. In that case the driver will not see the interrupts which leads to I/O timeout. This issue only happens when there are many I/O completions on a single reply queue. This forces the driver to switch between the interrupt and IRQ context. Make the driver process the reply queue one more time after enabling the IRQ. Link: https://lore.kernel.org/linux-scsi/20201102072746.27410-1-sreekanth.reddy@broadcom.com/ Link: https://lore.kernel.org/r/20210528131307.25683-5-chandrakanth.patil@broadcom.com Cc: Tomas Henzl <thenzl@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: megaraid_sas: Early detection of VD deletion through RaidMap updateKashyap Desai3-9/+92
[ Upstream commit ae6874ba4b43c5a00065f48599811a09d33b873d ] Consider the case where a VD is deleted and the targetID of that VD is assigned to a newly created VD. If the sequence of deletion/addition of VD happens very quickly there is a possibility that second event (VD add) occurs even before the driver processes the first event (VD delete). As event processing is done in deferred context the device list remains the same (but targetID is re-used) so driver will not learn the VD deletion/additon. I/Os meant for the older VD will be directed to new VD which may lead to data corruption. Make driver detect the deleted VD as soon as possible based on the RaidMap update and block further I/O to that device. Link: https://lore.kernel.org/r/20210528131307.25683-4-chandrakanth.patil@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: megaraid_sas: Fix resource leak in case of probe failureChandrakanth Patil2-0/+14
[ Upstream commit b5438f48fdd8e1c3f130d32637511efd32038152 ] The driver doesn't clean up all the allocated resources properly when scsi_add_host(), megasas_start_aen() function fails during the PCI device probe. Clean up all those resources. Link: https://lore.kernel.org/r/20210528131307.25683-3-chandrakanth.patil@broadcom.com Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: scsi_dh_alua: Check for negative result valueHannes Reinecke1-4/+4
[ Upstream commit 7e26e3ea028740f934477ec01ba586ab033c35aa ] scsi_execute() will now return a negative error if there was an error prior to command submission; evaluate that instead if checking for DRIVER_ERROR. [mkp: build fix] Link: https://lore.kernel.org/r/20210427083046.31620-6-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: core: Fixup calling convention for scsi_mode_sense()Hannes Reinecke4-16/+17
[ Upstream commit 8793613de913e03e7c884f4cc56e350bc716431e ] The description for scsi_mode_sense() claims to return the number of valid bytes on success, which is not what the code does. Additionally there is no gain in returning the SCSI status, as everything the callers do is to check against scsi_result_is_good(), which is what scsi_mode_sense() does already. So change the calling convention to return a standard error code on failure, and 0 on success, and adapt the description and all callers. Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: mpt3sas: Fix deadlock while cancelling the running firmware eventSuganath Prabu S1-0/+22
[ Upstream commit e2fac6c44ae06e58ac02181b048af31195883c31 ] Do not cancel current running firmware event work if the event type is different from MPT3SAS_REMOVE_UNRESPONDING_DEVICES. Otherwise a deadlock can be observed while cancelling the current firmware event work if a hard reset operation is called as part of processing the current event. Link: https://lore.kernel.org/r/20210518051625.1596742-2-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: core: Cap scsi_host cmd_per_lun at can_queueJohn Garry1-0/+3
[ Upstream commit ea2f0f77538c50739b9fb4de4700cee5535e1f77 ] The sysfs handling function sdev_store_queue_depth() enforces that the sdev queue depth cannot exceed shost can_queue. The initial sdev queue depth comes from shost cmd_per_lun. However, the LLDD may manually set cmd_per_lun to be larger than can_queue, which leads to an initial sdev queue depth greater than can_queue. Such an issue was reported in [0], which caused a hang. That has since been fixed in commit fc09acb7de31 ("scsi: scsi_debug: Fix cmd_per_lun, set to max_queue"). Stop this possibly happening for other drivers by capping shost cmd_per_lun at shost can_queue. [0] https://lore.kernel.org/linux-scsi/YHaez6iN2HHYxYOh@T590/ Link: https://lore.kernel.org/r/1621434662-173079-1-git-send-email-john.garry@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: lpfc: Fix crash when lpfc_sli4_hba_setup() fails to initialize the SGLsJames Smart1-2/+3
[ Upstream commit 5aa615d195f1e142c662cb2253f057c9baec7531 ] The driver is encountering a crash in lpfc_free_iocb_list() while performing initial attachment. Code review found this to be an errant failure path that was taken, jumping to a tag that then referenced structures that were uninitialized. Fix the failure path. Link: https://lore.kernel.org/r/20210514195559.119853-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: lpfc: Fix "Unexpected timeout" error in direct attach topologyJames Smart1-0/+9
[ Upstream commit e30d55137edef47434c40d7570276a0846fe922c ] An 'unexpected timeout' message may be seen in a point-2-point topology. The message occurs when a PLOGI is received before the driver is notified of FLOGI completion. The FLOGI completion failure causes discovery to be triggered for a second time. The discovery timer is restarted but no new discovery activity is initiated, thus the timeout message eventually appears. In point-2-point, when discovery has progressed before the FLOGI completion is processed, it is not a failure. Add code to FLOGI completion to detect that discovery has progressed and exit the FLOGI handling (noop'ing it). Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: hisi_sas: Propagate errors in interrupt_init_v1_hw()Sergey Shtylyov1-6/+6
[ Upstream commit ab17122e758ef68fb21033e25c041144067975f5 ] After commit 6c11dc060427 ("scsi: hisi_sas: Fix IRQ checks") we have the error codes returned by platform_get_irq() ready for the propagation upsream in interrupt_init_v1_hw() -- that will fix still broken deferred probing. Let's propagate the error codes from devm_request_irq() as well since I don't see the reason to override them with -ENOENT... Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ru Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: arcmsr: Fix doorbell status being updated late on ARC-1886ching Huang1-2/+9
[ Upstream commit d9a231226f28261a787535e08d0c78669e1ad010 ] It is possible for the IOP to be delayed in updating the doorbell status. The doorbell status should not be 0 so loop until the value changes. Link: https://lore.kernel.org/r/afdfdf7eabecf14632492c4987a6b9ac6312a7ad.camel@areca.com.tw Signed-off-by: ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: arcmsr: Fix the wrong CDB payload report to IOPching Huang1-2/+6
[ Upstream commit 5b8644968d2ca85abb785e83efec36934974b0c2 ] This patch fixes the wrong CDB payload report to IOP. Link: https://lore.kernel.org/r/d2c97df3c817595c6faf582839316209022f70da.camel@areca.com.tw Signed-off-by: ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20scsi: core: Fix bad pointer dereference when ehandler kthread is invalidTyrel Datwyler1-0/+1
commit 93aa71ad7379900e61c8adff6a710a4c18c7c99b upstream. Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 &lt;SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE&gt; CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn. Link: https://lore.kernel.org/r/20210701195659.3185475-1-tyreld@linux.ibm.com Fixes: 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") Cc: stable@vger.kernel.org Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14scsi: core: Retry I/O for Notify (Enable Spinup) Required errorQuat Le1-0/+1
commit 104739aca4488909175e9e31d5cd7d75b82a2046 upstream. If the device is power-cycled, it takes time for the initiator to transmit the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to respond to the primitive to become ACTIVE. Retry the I/O request to allow the device time to become ACTIVE. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Quat Le <quat.le@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14scsi: libfc: Correct the condition check and invalid argument passedJaved Hasan1-3/+5
commit 8f70328c068f9f5c5db82848724cb276f657b9cd upstream. Incorrect condition check was leading to data corruption. Link: https://lore.kernel.org/r/20210603101404.7841-3-jhasan@marvell.com Fixes: 8fd9efca86d0 ("scsi: libfc: Work around -Warray-bounds warning") CC: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14scsi: lpfc: Fix Node recovery when driver is handling simultaneous PLOGIsJames Smart1-3/+18
commit 4012baeab6ca22b7f7beb121b6d0da0a62942fdd upstream. When lpfc is handling a solicited and unsolicited PLOGI with another initiator, the remote initiator is never recovered. The node for the initiator is erroneouosly removed and all resources released. In lpfc_cmpl_els_plogi(), when lpfc_els_retry() returns a failure code, the driver is calling the state machine with a device remove event because the remote port is not currently registered with the SCSI or NVMe transports. The issue is that on a PLOGI "collision" the driver correctly aborts the solicited PLOGI and allows the unsolicited PLOGI to complete the process, but this process is interrupted with a device_rm event. Introduce logic in the PLOGI completion to capture the PLOGI collision event and jump out of the routine. This will avoid removal of the node. If there is no collision, the normal node removal will occur. Fixes: 52edb2caf675 ("scsi: lpfc: Remove ndlp when a PLOGI/ADISC/PRLI/REG_RPI ultimately fails") Cc: <stable@vger.kernel.org> # v5.11+ Link: https://lore.kernel.org/r/20210514195559.119853-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14scsi: lpfc: Fix unreleased RPIs when NPIV ports are createdJames Smart6-40/+115
commit 01131e7aae5d30e23e3cdd1eebe51bbc5489ae8f upstream. While testing NPIV and watching logins and used RPI levels, it was seen the used RPI count was much higher than the number of remote ports discovered. Code inspection showed that remote port removals on any NPIV instance are releasing the RPI, but not performing an UNREG_RPI with the adapter thus the reference counting never fully drops and the RPI is never fully released. This was happening on NPIV nodes due to a log of fabric ELS's to fabric addresses. This lack of UNREG_RPI was introduced by a prior node rework patch that performed the UNREG_RPI as part of node cleanup. To resolve the issue, do the following: - Restore the RPI release code, but move the location to so that it is in line with the new node cleanup design. - NPIV ports now release the RPI and drop the node when the caller sets the NLP_RELEASE_RPI flag. - Set the NLP_RELEASE_RPI flag in node cleanup which will trigger a release of RPI to free pool. - Ensure there's an UNREG_RPI at LOGO completion so that RPI release is completed. - Stop offline_prep from skipping nodes that are UNUSED. The RPI may not have been released. - Stop the default RPI handling in lpfc_cmpl_els_rsp() for SLI4. - Fixed up debugfs RPI displays for better debugging. Fixes: a70e63eee1c1 ("scsi: lpfc: Fix NPIV Fabric Node reference counting") Link: https://lore.kernel.org/r/20210514195559.119853-2-jsmart2021@gmail.com Cc: <stable@vger.kernel.org> # v5.11+ Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14scsi: megaraid_sas: Send all non-RW I/Os for TYPE_ENCLOSURE device through ↵Chandrakanth Patil1-2/+8
firmware commit 79db830162b733f5f3ee80f0673eeeb0245fe38b upstream. The driver issues all non-ReadWrite I/Os for TYPE_ENCLOSURE devices through the fast path with invalid dev handle. Fast path in turn directs all the I/Os to the firmware. As firmware stopped handling those I/Os from SAS3.5 generation of controllers (Ventura generation and onwards) this will lead to I/O failures. Switch the driver to issue all the non-ReadWrite I/Os for TYPE_ENCLOSURE devices directly to firmware for SAS3.5 generation of controllers and later. Link: https://lore.kernel.org/r/20210528131307.25683-2-chandrakanth.patil@broadcom.com Cc: <stable@vger.kernel.org> # v5.11+ Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14scsi: mpt3sas: Fix error return value in _scsih_expander_add()Zhen Lei1-1/+3
[ Upstream commit d6c2ce435ffe23ef7f395ae76ec747414589db46 ] When an expander does not contain any 'phys', an appropriate error code -1 should be returned, as done elsewhere in this function. However, we currently do not explicitly assign this error code to 'rc'. As a result, 0 was incorrectly returned. Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14scsi: iscsi: Flush block work before unblockMike Christie1-0/+2
[ Upstream commit 7ce9fc5ecde0d8bd64c29baee6c5e3ce7074ec9a ] We set the max_active iSCSI EH works to 1, so all work is going to execute in order by default. However, userspace can now override this in sysfs. If max_active > 1, we can end up with the block_work on CPU1 and iscsi_unblock_session running the unblock_work on CPU2 and the session and target/device state will end up out of sync with each other. This adds a flush of the block_work in iscsi_unblock_session. Link: https://lore.kernel.org/r/20210525181821.7617-17-michael.christie@oracle.com Fixes: 1d726aa6ef57 ("scsi: iscsi: Optimize work queue flush use") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14scsi: iscsi: Fix in-kernel conn failure handlingMike Christie1-197/+274
[ Upstream commit 23d6fefbb3f6b1cc29794427588b470ed06ff64e ] Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") has the following regressions/bugs that this patch fixes: 1. It can return cmds to upper layers like dm-multipath where that can retry them. After they are successful the fs/app can send new I/O to the same sectors, but we've left the cmds running in FW or in the net layer. We need to be calling ep_disconnect if userspace is not up. This patch only fixes the issue for offload drivers. iscsi_tcp will be fixed in separate commit because it doesn't have a ep_disconnect call. 2. The drivers that implement ep_disconnect expect that it's called before conn_stop. Besides crashes, if the cleanup_task callout is called before ep_disconnect it might free up driver/card resources for session1 then they could be allocated for session2. But because the driver's ep_disconnect is not called it has not cleaned up the firmware so the card is still using the resources for the original cmd. 3. The stop_conn_work_fn can run after userspace has done its recovery and we are happily using the session. We will then end up with various bugs depending on what is going on at the time. We may also run stop_conn_work_fn late after userspace has called stop_conn and ep_disconnect and is now going to call start/bind conn. If stop_conn_work_fn runs after bind but before start, we would leave the conn in a unbound but sort of started state where IO might be allowed even though the drivers have been set in a state where they no longer expect I/O. 4. Returning -EAGAIN in iscsi_if_destroy_conn if we haven't yet run the in kernel stop_conn function is breaking userspace. We should have been doing this for the caller. Link: https://lore.kernel.org/r/20210525181821.7617-8-michael.christie@oracle.com Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14scsi: iscsi: Rel ref after iscsi_lookup_endpoint()Mike Christie6-32/+73
[ Upstream commit 9e5fe1700896c85040943fdc0d3fee0dd3e0d36f ] Subsequent commits allow the kernel to do ep_disconnect. In that case we will have to get a proper refcount on the ep so one thread does not delete it from under another. Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14scsi: iscsi: Use system_unbound_wq for destroy_workMike Christie1-14/+1
[ Upstream commit b25b957d2db1585602c2c70fdf4261a5641fe6b7 ] Use the system_unbound_wq for async session destruction. We don't need a dedicated workqueue for async session destruction because: 1. perf does not seem to be an issue since we only allow 1 active work. 2. it does not have deps with other system works and we can run them in parallel with each other. Link: https://lore.kernel.org/r/20210525181821.7617-6-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14scsi: iscsi: Force immediate failure during shutdownMike Christie1-4/+10
[ Upstream commit 06c203a5566beecebb1f8838d026de8a61c8df71 ] If the system is not up, we can just fail immediately since iscsid is not going to ever answer our netlink events. We are already setting the recovery_tmo to 0, but by passing stop_conn STOP_CONN_TERM we never will block the session and start the recovery timer, because for that flag userspace will do the unbind and destroy events which would remove the devices and wake up and kill the eh. Since the conn is dead and the system is going dowm this just has us use STOP_CONN_RECOVER with recovery_tmo=0 so we fail immediately. However, if the user has set the recovery_tmo=-1 we let the system hang like they requested since they might have used that setting for specific reasons (one known reason is for buggy cluster software). Link: https://lore.kernel.org/r/20210525181821.7617-5-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14scsi: iscsi: Stop queueing during ep_disconnectMike Christie8-11/+75
[ Upstream commit 891e2639deae721dc43764a44fa255890dc34313 ] During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new I/O but every driver except cxgbi and iscsi_tcp can still get I/O from __iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before ep_disconnect. This could happen if we were terminating the session, and the logout timed out before it was even sent to libiscsi. Fix the issue by adding a helper which reverses the bind_conn call that allows new I/O to be queued. Drivers implementing ep_disconnect can use this to make sure new I/O is not queued to them when handling the disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14scsi: FlashPoint: Rename si_flags fieldRandy Dunlap1-16/+16
[ Upstream commit 4d431153e751caa93f3b7e6f6313446974e92253 ] The BusLogic driver has build errors on ia64 due to a name collision (in the #included FlashPoint.c file). Rename the struct field in struct sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build. This is the first problem. There are 50+ others after this one: In file included from ../include/uapi/linux/signal.h:6, from ../include/linux/signal_types.h:10, from ../include/linux/sched.h:29, from ../include/linux/hardirq.h:9, from ../include/linux/interrupt.h:11, from ../drivers/scsi/BusLogic.c:27: ../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token 15 | #define si_flags _sifields._sigfault._flags | ^ ../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags' 43 | u16 si_flags; | ^~~~~~~~ In file included from ../drivers/scsi/BusLogic.c:51: ../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter': ../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields' 1076 | pCardInfo->si_flags = 0x0000; | ^~ ../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields' Link: https://lore.kernel.org/r/20210529234857.6870-1-rdunlap@infradead.org Fixes: 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.") Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.de> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Khalid Aziz <khalid@gonehiking.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-17 05:47:04 +0300