summaryrefslogtreecommitdiff
path: root/drivers/scsi/megaraid/megaraid_sas_base.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-12scsi: megaraid_sas: Limit device queue depth to controller queue depthKashyap Desai1-3/+3
The driver currently assigns a pre-defined queue depth when the firmware-provided device queue depth is greater than the controller queue depth. Use the controller queue depth if the reported target queue depth is too large. Link: https://lore.kernel.org/r/20200508083838.22778-2-chandrakanth.patil@broadcom.com Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-15scsi: megaraid: make two symbols static in megaraid_sas_base.cJason Yan1-2/+2
Fix the following sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:84:5: warning: symbol 'rdpq_enable' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_base.c:92:14: warning: symbol 'scmd_timeout' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200407092827.18074-5-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-17scsi: megaraid_sas: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-3/+4
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Also corrected the wrongly passed limit size. The remaining buffer size must be decremented. Link: https://lore.kernel.org/r/20200315094241.9086-7-tiwai@suse.de Cc: "James E . J . Bottomley" <jejb@linux.ibm.com> Cc: "Martin K . Petersen" <martin.petersen@oracle.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-11scsi: megaraid_sas: fix indentation issueColin Ian King1-2/+2
There are two statements that are indented one level too deeply, remove the extraneous tabs. [mkp: fix typo spotted by Bart] Link: https://lore.kernel.org/r/20200126154757.42530-1-colin.king@canonical.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-11/+9
Pull misc SCSI fixes from James Bottomley: "Five small patches, all in drivers or doc, which missed the initial pull request. The qla2xxx and megaraid_sas are actual fixes and the rest are spelling and doc changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: fix spelling mistake "initilized" -> "initialized" scsi: pm80xx: fix spelling mistake "to" -> "too" scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com scsi: megaraid_sas: fixup MSIx interrupt setup during resume scsi: qla2xxx: Fix unbound NVME response length
2020-01-30scsi: megaraid_sas: fixup MSIx interrupt setup during resumeHannes Reinecke1-11/+9
Streamline resume workflow by using the same functions for enabling MSIx interrupts as used during initialisation. Without it the driver might crash during resume with: WARNING: CPU: 2 PID: 4306 at ../drivers/pci/msi.c:1303 pci_irq_get_affinity+0x3b/0x90 Link: https://lore.kernel.org/r/20200113132609.69536-1-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-30Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-25/+70
Pull SCSI updates from James Bottomley: "This series is slightly unusual because it includes Arnd's compat ioctl tree here: 1c46a2cf2dbd Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue Excluding Arnd's changes, this is mostly an update of the usual drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There are a couple of core and base updates around error propagation and atomicity in the attribute container base we use for the SCSI transport classes. The rest is minor changes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits) scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity scsi: hisi_sas: Modify the file permissions of trigger_dump to write only scsi: hisi_sas: Replace magic number when handle channel interrupt scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock scsi: hisi_sas: use threaded irq to process CQ interrupts scsi: ufs: Use UFS device indicated maximum LU number scsi: ufs: Add max_lu_supported in struct ufs_dev_info scsi: ufs: Delete is_init_prefetch from struct ufs_hba scsi: ufs: Inline two functions into their callers scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init() scsi: ufs: Split ufshcd_probe_hba() based on its called flow scsi: ufs: Delete struct ufs_dev_desc scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails scsi: ufs-mediatek: enable low-power mode for hibern8 state scsi: ufs: export some functions for vendor usage scsi: ufs-mediatek: add dbg_register_dump implementation scsi: qla2xxx: Fix a NULL pointer dereference in an error path scsi: qla1280: Make checking for 64bit support consistent scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1 ...
2020-01-16scsi: megaraid_sas: Do not initiate OCR if controller is not in ready stateAnand Lodnoor1-1/+2
Driver initiates OCR if a DCMD command times out. But there is a deadlock if the driver attempts to invoke another OCR before the mutex lock (reset_mutex) is released from the previous session of OCR. This patch takes care of the above scenario using new flag MEGASAS_FUSION_OCR_NOT_POSSIBLE to indicate if OCR is possible. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1579000882-20246-9-git-send-email-anand.lodnoor@broadcom.com Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-16scsi: megaraid_sas: Re-Define enum DCMD_RETURN_STATUSAnand Lodnoor1-21/+29
DCMD_INIT is introduced to indicate the initial DCMD status, which was earlier set to MFI status. DCMD_BUSY indicates the resource is busy or locked. Link: https://lore.kernel.org/r/1579000882-20246-8-git-send-email-anand.lodnoor@broadcom.com Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-16scsi: megaraid_sas: Do not kill host bus adapter, if adapter is already deadAnand Lodnoor1-0/+6
Link: https://lore.kernel.org/r/1579000882-20246-5-git-send-email-anand.lodnoor@broadcom.com Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-16scsi: megaraid_sas: Set no_write_same only for Virtual DiskAnand Lodnoor1-1/+4
Disable WRITE_SAME (no_write_same) for Virtual Disks only. For System PDs and EPDs (Enhanced PDs), WRITE_SAME need not be disabled by default. Link: https://lore.kernel.org/r/1579000882-20246-3-git-send-email-anand.lodnoor@broadcom.com Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-16scsi: megaraid_sas: Reset adapter if FW is not in READY state after device ↵Anand Lodnoor1-2/+29
resume After device resume we expect the firmware to be in READY state. Transition to READY might fail due to unhandled exceptions, such as an internal error or a hardware failure. Retry initiating chip reset and wait for the controller to come to ready state. Link: https://lore.kernel.org/r/1579000882-20246-2-git-send-email-anand.lodnoor@broadcom.com Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-1/+1
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-11-27scsi: megaraid_sas: Make poll_aen_lock staticYueHaibing1-1/+1
Fix sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:187:12: warning: symbol 'poll_aen_lock' was not declared. Should it be static? Link: https://lore.kernel.org/r/20191125144454.22680-1-yuehaibing@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-10scsi: megaraid_sas: Unique names for MSI-X vectorsChandrakanth Patil1-2/+6
Currently, MSI-X vectors name appears in /proc/interrupts is "megasas" which is same for all the vectors. This patch provides a unique name for all megaraid_sas controllers and their associated MSI-X interrupts. Link: https://lore.kernel.org/r/20191007051828.12294-1-chandrakanth.patil@broadcom.com Suggested-by: Konstantin Shalygin <k0ste@k0ste.ru> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-21/+91
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi, lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The only core change this time around is the addition of request batching for virtio. Since batching requires an additional flag to use, it should be invisible to the rest of the drivers" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits) scsi: hisi_sas: Fix the conflict between device gone and host reset scsi: hisi_sas: Add BIST support for phy loopback scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation scsi: hisi_sas: Remove some unused function arguments scsi: hisi_sas: Remove redundant work declaration scsi: hisi_sas: Remove hisi_sas_hw.slot_complete scsi: hisi_sas: Assign NCQ tag for all NCQ commands scsi: hisi_sas: Update all the registers after suspend and resume scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset() scsi: hisi_sas: add debugfs auto-trigger for internal abort time out scsi: virtio_scsi: unplug LUNs when events missed scsi: scsi_dh_rdac: zero cdb in send_mode_select() scsi: fcoe: fix null-ptr-deref Read in fc_release_transport scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code scsi: ufs: Use kmemdup in ufshcd_read_string_desc() ...
2019-08-13scsi: megaraid_sas: Introduce module parameter for default queue depthChandrakanth Patil1-21/+91
This patch provides a module parameter and sysfs interface to select whether the queue depth for each device should be based on the value suggested by firmware (the default) or the maximum supported by the controller (can_queue). Although we have a sysfs interface per sdev to change the queue depth of individual scsi devices, this implementation provides a single sysfs entry per shost to switch between the controller max and the value reported by firmware. The module parameter can provide an interface for one time grub settings and provides persistent settings across the boot. [mkp: tweaked commit desc] Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-24scsi: megaraid_sas: fix panic on loading firmware crashdumpJunxiao Bi1-0/+3
While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-24scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"Colin Ian King1-1/+1
Fix spelling mistake in kernel warning message and replace printk with with pr_warn. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-20Merge tag 'scsi-fixes' of ↵Linus Torvalds1-6/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ...
2019-07-17scsi: megaraid_sas: set an unlimited max_segment_sizeChristoph Hellwig1-0/+1
When using a virt_boundary_mask, as done for NVMe devices attached to megaraid_sas controllers, we require an unlimited max_segment_size as the virt boundary merging code assumes that. But we also need to propagate that to the DMA mapping layer to make dma-debug happy. The SCSI layer takes care of that when using the per-host virt_boundary setting, but given that megaraid_sas only wants to set the virt_boundary for actual NVMe devices, we can't rely on that. The DMA layer maximum segment is global to the HBA however, so we have to set it explicitly. This patch assumes that megaraid_sas does not have a segment size limitation, which seems true based on the SGL format, but will need to be verified. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-12scsi: megaraid_sas: Add module parameter for FW Async event loggingShivasharan S1-1/+17
Add module parameter to control logging levels of async event notifications from firmware that get logged to system log. Also, allow changing the value from sysfs after driver load. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-12scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllersShivasharan S1-1/+2
Load balancing IO completions across all available MSI-X vectors should be enabled for Invader and later generation controllers only. This needs to be disabled for older controllers. Add an adapter type check before setting msix_load_balance flag. Fixes: 1d15d9098ad1 ("scsi: megaraid_sas: Load balance completions across all MSI-X") Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-12scsi: megaraid_sas: Fix calculation of target IDShivasharan S1-1/+2
In megasas_get_target_prop(), driver is incorrectly calculating the target ID for devices with channel 1 and 3. Due to this, firmware will either fail the command (if there is no device with the target id sent from driver) or could return the properties for a target which was not intended. Devices could end up with the wrong queue depth due to this. Fix target id calculation for channel 1 and 3. Fixes: 96188a89cc6d ("scsi: megaraid_sas: NVME interface target prop added") Cc: stable@vger.kernel.org Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-12scsi: megaraid_sas: Make some symbols staticYueHaibing1-3/+3
Fix sparse warnings: drivers/scsi/megaraid/megaraid_sas_base.c:271:1: warning: symbol 'megasas_issue_dcmd' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_base.c:2227:6: warning: symbol 'megasas_do_ocr' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_base.c:3194:25: warning: symbol 'megaraid_host_attrs' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-12Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-131/+581
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-06-27scsi: megaraid_sas: Introduce various Aero performance modesChandrakanth Patil1-7/+53
For Aero adapters, driver provides three different performance modes controlled through module parameter named 'perf_mode'. Below are those performance modes: 0: Balanced - Additional high IOPS reply queues will be enabled along with low latency queues. Interrupt coalescing will be enabled only for these high IOPS reply queues. 1: IOPS - No additional high IOPS queues are enabled. Interrupt coalescing will be enabled on all reply queues. 2: Latency - No additional high IOPS queues are enabled. Interrupt coalescing will be disabled on all reply queues. This is a legacy behavior similar to Ventura & Invader Series. Default performance mode settings: - Performance mode set to 'Balanced', if Aero controller is working in 16GT/s PCIe speed. - Performance mode will be set to 'Latency' mode for all other cases. Through module parameter 'perf_mode', user can override default performance mode to desired one. Captured some performance numbers with these performance modes. 4k Random Read IO performance numbers on 24 SAS SSD drives for above three performance modes. Performance data is from Intel Skylake and HGST SS300 (drive model SDLL1DLR400GCCA1). IOPS: ----------------------------------------------------------------------- |perf_mode | qd = 1 | qd = 64 | note | |-------------|--------|---------|------------------------------------- |balanced | 259K | 3061k | Provides max performance numbers | | | | | both on lower QD workload & | | | | | also on higher QD workload | |-------------|--------|---------|------------------------------------- |iops | 220K | 3100k | Provides max performance numbers | | | | | only on higher QD workload. | |-------------|--------|---------|------------------------------------- |latency | 246k | 2226k | Provides good performance numbers | | | | | only on lower QD worklaod. | ----------------------------------------------------------------------- Average Latency: ----------------------------------------------------- |perf_mode | qd = 1 | qd = 64 | |-------------|--------------|----------------------| |balanced | 92.05 usec | 501.12 usec | |-------------|--------------|----------------------| |iops | 108.40 usec | 498.10 usec | |-------------|--------------|----------------------| |latency | 97.10 usec | 689.26 usec | ----------------------------------------------------- Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: Set affinity for high IOPS reply queuesChandrakanth Patil1-0/+22
High iops queues are mapped to non-managed IRQs. Set affinity of non-managed irqs to local numa node. Low latency queues are mapped to managed IRQs. Driver reserves some reply queues for high IOPS queues (through pci_alloc_irq_vectors_affinity and .pre_vectors interface). The rest of queues are for low latency. Based on IO workload, driver will decide which group of reply queues (either high IOPS queues or low latency queues) to be used. High IOPS queues will be mapped to local numa node of controller and low latency queues will be mapped to CPUs across numa nodes. In general, high IOPS and low latency queues should fit into 128 reply queues which is the max number of reply queues supported by Aero adapters. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: Add support for High IOPS queuesChandrakanth Patil1-17/+118
Aero controllers support balanced performance mode through the ability to configure queues with different properties. Reply queues with interrupt coalescing enabled are called "high iops reply queues" and reply queues with interrupt coalescing disabled are called "low latency reply queues". The driver configures a combination of high iops and low latency reply queues if: - HBA is an AERO controller; - MSI-X vectors supported by the HBA is 128; - Total CPU count in the system more than high iops queue count; - Driver is loaded with default max_msix_vectors module parameter; and - System booted in non-kdump mode. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: Add support for MPI toolbox commandsChandrakanth Patil1-1/+30
Added driver support to allow passthrough MPI toolbox type MFI commands to firmware based on firmware capability. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driverChandrakanth Patil1-1/+9
For RAID5/RAID6 volumes configured behind Aero, driver will be doing 64bit division operations on behalf of firmware as controller's ARM CPU is very slow in this division. Later, driver calculates Q-ARM, P-ARM and Log-ARM and passes those values to firmware by writing these values to RAID_CONTEXT. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for ↵Chandrakanth Patil1-0/+3
only Ventura RAID1 PCI bandwidth limit algorithm is not applicable to Aero as it's PCIe Gen4 adapter. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: megaraid_sas: Add check for count returned by ↵Chandrakanth Patil1-0/+3
HOST_DEVICE_LIST DCMD Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: Handle sequence JBOD map failure at driver levelChandrakanth Patil1-5/+9
Issue: This issue is applicable to scenario when JBOD sequence map is unavailable (memory allocation for JBOD sequence map failed) to driver but feature is supported by firmware. If the driver sends a JBOD IO by not adding 255 (MAX_PHYSICAL_DEVICES - 1) to device ID when underlying firmware supports JBOD sequence map, it will lead to the IO failure. Fix: For JBOD IOs, driver will not use the RAID map to fetch the devhandle if JBOD sequence map is unavailable. Driver will set Devhandle to 0xffff and Target ID to 'device ID + 255 (MAX_PHYSICAL_DEVICES - 1)'. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeoutChandrakanth Patil1-0/+13
Issue: There is possibility of few DCMDs timing out with 'reset_mutex' lock held. As part of DCMD timeout handling, driver calls function megasas_reset_fusion which also tries to acquire same lock 'reset_mutex' and end up with deadlock. Fix: Upon timeout of DCMDs (which are fired with 'reset_mutex' lock held), driver will release 'reset_mutex' before calling OCR function and will acquire lock again after OCR function returns. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: megaraid_sas: Add support for Non-secure Aero PCI IDsChandrakanth Patil1-0/+25
This patch will add support for non-secure Aero adapter PCI IDs. Driver will throw an error message when a non-secure type controller is detected. Purpose of this interface is to avoid interacting with any firmware which is not secured/signed by Broadcom. Any tampering on Firmware component will be detected by hardware and it will be communicated to the driver to avoid any further interaction with that component. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: use DEVICE_ATTR_{RO, RW}Tomas Henzl1-26/+18
Use existing macros. No functional change. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: use octal permissions instead of constantsTomas Henzl1-10/+10
Checkpatch emits a warning when using symbolic permissions. Use octal permissions instead. No functional change. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: make max_sectors visible in sysTomas Henzl1-1/+1
Support is easier with all driver parameters visible in sysfs. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: remove set but not used variables 'buff_addr' and 'ci_h'YueHaibing1-5/+0
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_fw_crash_buffer_show: drivers/scsi/megaraid/megaraid_sas_base.c:3138:16: warning: variable buff_addr set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_get_pd_list: drivers/scsi/megaraid/megaraid_sas_base.c:4426:13: warning: variable ci_h set but not used [-Wunused-but-set-variable] 'buff_addr' is never used since inroduction in commit fc62b3fc9021 ("megaraid_sas : Firmware crash dump feature support") 'ci_h' is not used since commit 9b3d028f3468 ("scsi: megaraid_sas: Pre-allocate frequently used DMA buffers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: remove set but not used variable 'sge_sz'YueHaibing1-11/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_create_frame_pool: drivers/scsi/megaraid/megaraid_sas_base.c:4124:6: warning: variable sge_sz set but not used [-Wunused-but-set-variable] It's not used any more since commit 200aed582d61 ("megaraid_sas: endianness related bug fixes and code optimization") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: remove set but not used variables 'host' and 'wait_time'YueHaibing1-7/+1
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_suspend: drivers/scsi/megaraid/megaraid_sas_base.c:7269:20: warning: variable host set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_aen_polling: drivers/scsi/megaraid/megaraid_sas_base.c:8397:15: warning: variable wait_time set but not used [-Wunused-but-set-variable] 'host' never used since introduction in commit 31ea7088974c ("[SCSI] megaraid_sas: add hibernation support") 'wait_time' never used since commit 11c71cb4ab7c ("megaraid_sas: Do not allow PCI access during OCR") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: remove set but not used variable 'cur_state'YueHaibing1-11/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_transition_to_ready: drivers/scsi/megaraid/megaraid_sas_base.c:3900:6: warning: variable cur_state set but not used [-Wunused-but-set-variable] Never used since commit 7218df69e360 ("[SCSI] megaraid_sas: use the firmware boot timeout when waiting for commands") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: Export RAID map through debugfsShivasharan S1-0/+14
Create a debugfs interface for megaraid_sas driver. Provide interface to dump driver RAID map in debugfs. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: Fix MSI-X vector printShivasharan S1-5/+5
Print FW supported MSI-X vector count only if FW supports MSI-X. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: Add debug prints for device listShivasharan S1-0/+35
Add debug prints related to device list being returned by firmware. The a debug flag to activate these prints. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: Add prints in suspend and resume pathShivasharan S1-0/+3
Add prints in resume/suspend path to help in debugging hibernation issues. The print gives an indication when the driver entry points are called. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: Print FW fault informationShivasharan S1-1/+4
When driver detects a firmware fault during load, dump additional information on fault code and subcode that will help in debugging. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: Export RAID map id through sysfsShivasharan S1-0/+15
Add a sysfs interface to get the raid map index that is being used by driver. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-19scsi: megaraid_sas: Print BAR information from driverShivasharan S1-0/+6
Add prints for BAR address information during driver load. This helps in debugging issues with BAR address changing during OS boot. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-02 19:21:35 +0300