summaryrefslogtreecommitdiff
path: root/drivers/scsi/hisi_sas
AgeCommit message (Collapse)AuthorFilesLines
2023-01-12scsi: hisi_sas: Set a port invalid only if there are no devices attached ↵Yihang Li1-1/+1
when refreshing port id Currently the driver sets the port invalid if one phy in the port is not enabled, which may cause issues in expander situation. In directly attached situation, if phy up doesn't occur in time when refreshing port id, the port is incorrectly set to invalid which will also cause disk lost. Therefore set a port invalid only if there are no devices attached to the port. Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-12scsi: hisi_sas: Use abort task set to reset SAS disks when discoveredXingui Yang1-1/+1
Currently clear task set is used to abort all commands remaining in the disk when the SAS disk is discovered, and if the disk is discovered by two initiators, other I_T nexuses are also affected. So use abort task set instead and take effect only on the specified I_T nexus. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-2-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-07scsi: hisi_sas: Fix tag freeing for reserved tagsJason Yan1-1/+1
The reserved tags were put in the lower region of the tagset in commit f7d190a94e35 ("scsi: hisi_sas: Put reserved tags in lower region of tagset"). However, only the allocate function was changed, freeing was not handled. This resulted in a failure to boot: [ 33.467345] hisi_sas_v3_hw 0000:b4:02.0: task exec: failed[-132]! [ 33.473413] sas: Executing internal abort failed 5000000000000603 (-132) [ 33.480088] hisi_sas_v3_hw 0000:b4:02.0: I_T nexus reset: internal abort (-132) [ 33.657336] hisi_sas_v3_hw 0000:b4:02.0: task exec: failed[-132]! [ 33.663403] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x40) [ 35.787344] hisi_sas_v3_hw 0000:b4:04.0: task exec: failed[-132]! [ 35.793411] sas: Executing internal abort failed 5000000000000703 (-132) [ 35.800084] hisi_sas_v3_hw 0000:b4:04.0: I_T nexus reset: internal abort (-132) [ 35.977335] hisi_sas_v3_hw 0000:b4:04.0: task exec: failed[-132]! [ 35.983403] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x40) [ 35.989643] ata10.00: revalidation failed (errno=-5) Fixes: f7d190a94e35 ("scsi: hisi_sas: Put reserved tags in lower region of tagset") Cc: John Garry <john.g.garry@oracle.com> Cc: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Acked-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus resetJie Zhan1-3/+5
SATA devices on an expander may be removed and not be found again when I_T nexus reset and revalidation are processed simultaneously. The issue comes from: - Revalidation can remove SATA devices in link reset, e.g. in hisi_sas_clear_nexus_ha(). - However, hisi_sas_debug_I_T_nexus_reset() polls the state of a SATA device on an expander after sending link_reset, where it calls: hisi_sas_debug_I_T_nexus_reset sas_ata_wait_after_reset ata_wait_after_reset ata_wait_ready smp_ata_check_ready sas_ex_phy_discover sas_ex_phy_discover_helper sas_set_ex_phy The ex_phy's change count is updated in sas_set_ex_phy(), so SATA devices after a link reset may not be found later through revalidation. A similar issue was reported in: commit 0f3fce5cc77e ("[SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready") commit 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling"). To address this issue, in hisi_sas_debug_I_T_nexus_reset(), we now call smp_ata_check_ready_type() that only polls the device type while not updating the ex_phy's data of libsas. Fixes: 71453bd9d1bf ("scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset") Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-5-zhanjie9@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus ↵Jie Zhan1-12/+4
HA reset" This reverts commit f5f2a2716055ad8c0c4ff83e51d667646c6c5d8a. This is now unnecessary to solve the SATA devices missing issue in hisi_sas_clear_nexus_ha(). Hence, we should not ignore bcast events during sas_eh_handle_sas_errors() in case of missing bcast events, unless a justified need is found and a mechanism to defer (but not ignore) bcast events in sas_eh_handle_sas_errors() is provided. Also, in hisi_sas_clear_nexus_ha(), there is nothing further to handle in "out: " other than return, so that part can be reverted. Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-3-zhanjie9@hisilicon.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"Jie Zhan1-7/+0
This reverts commit 11ff0c98fca35df16c84d4eee52008faecaf10a6. Draining or flushing events in hisi_sas_rescan_topology() can hang the driver, typically with phy up or phy down events being processed, i.e. sas_porte_bytes_dmaed() or sas_phye_loss_of_signal(). Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-2-zhanjie9@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-22scsi: hisi_sas: Put reserved tags in lower region of tagsetJohn Garry1-7/+7
To be consistent with blk-mq, put the reserved tags in the lower region of the tagset. Eventually we hope to get rid of all this reserved tag management. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1666091763-11023-4-git-send-email-john.garry@huawei.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-22scsi: hisi_sas: Use sas_task_find_rq()John Garry1-18/+8
Use sas_task_find_rq() to lookup the request per task for its driver tag. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1666091763-11023-3-git-send-email-john.garry@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-18scsi: hisi_sas: Use sas_find_attathed_phy_id() instead of open coding itJason Yan1-11/+3
The attached phy finding is open coded. Replace it with sas_find_attached_phy_id(). To keep things consistent, the return value of hisi_sas_dev_found() is also changed to -ENODEV after calling sas_find_attathed_phy_id() failed. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20220928070130.3657183-6-yanaijie@huawei.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-18scsi: hisi_sas: Modify v3 HW SATA disk error state completion processingXingui Yang1-1/+4
When an NCQ error occurs, the controller will abnormally complete the I/Os that are newly delivered to disk, and bit8 in CQ dw3 will be set which indicates that the SATA disk is in error state. The current processing flow is to set ts->stat to SAS_OPEN_REJECT and then sas_ata_task_done() will set FIS stat to ATA_ERR. After analyzing the I/O by ata_eh_analyze_tf(), err_mask will set to AC_ERR_HSM. If media error occurs for four times within 10 minutes and the chip rejects new I/Os for four times, NCQ will be disabled due to excessive errors, which is undesirable. Therefore, use sas_task_abort() to handle abnormally completed I/Os when SATA disk is in error state, as these abnormally completed I/Os are already processed by sas_ata_device_link_abort() and qc->flag are set to ATA_QCFLAG_FAILED. If sas_task_abort() is used, qc->err_mask will not be modified in EH. Unlike the current process flow, it will not increase the count of ECAT_TOUT_HSM and not turn off NCQ. Like other I/Os on the disk that do not have an error but do not return after the NCQ error, they are retried after the EH. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-5-git-send-email-john.garry@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-18scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hwXingui Yang3-3/+64
When CQ header dw3 SATA_DISK_ERR is set it means this SATA disk is in error state and the current IPTT is invalid. An invalid IPTT does not correspond to any slot. In this scenario, new I/Os that delivered to disk will be rejected by the controller and all I/Os remaining in the disk should be aborted, which we add here with the sas_ata_device_link_abort() call. In hisi_sas_abort_task() we don't want to issue a soft reset as it may cause info to be lost in the target disk for the ATA EH autopsy. In this case, just release resources - the disk won't return other I/Os normally after NCQ Error, so this is safe. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-4-git-send-email-john.garry@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-18scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()Xingui Yang1-5/+3
Each branch currently defines a slot variable independently, and it is neater to move it to the function head. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-3-git-send-email-john.garry@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds5-25/+38
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr, mpt3sas, target). The biggest change (from my biased viewpoint) being that the mpi3mr now attached to the SAS transport class, making it the first fusion type device to do so. Beyond the usual bug fixing and security class reworks, there aren't a huge number of core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() scsi: mpi3mr: Remove unnecessary cast scsi: stex: Properly zero out the passthrough command structure scsi: mpi3mr: Update driver version to 8.2.0.3.0 scsi: mpi3mr: Fix scheduling while atomic type bug scsi: mpi3mr: Scan the devices during resume time scsi: mpi3mr: Free enclosure objects during driver unload scsi: mpi3mr: Handle 0xF003 Fault Code scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels scsi: mpi3mr: Support new power management framework scsi: mpi3mr: Update mpi3 header files scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use" scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use" scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO scsi: core: Add I/O timeout count for SCSI device scsi: qedf: Populate sysfs attributes for vport scsi: pm8001: Replace one-element array with flexible-array member scsi: 3w-xxxx: Replace one-element array with flexible-array member scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command() ...
2022-09-07scsi: hisi_sas: Don't send bcast events from HW during nexus HA resetJohn Garry1-4/+12
Remote devices may go missing from the per-device nexus reset part of the HA nexus, i.e after the controller reset. This is because libsas may find the devices to be gone as the phy may be temporarily down when processing the bcast event generated from the nexus reset. Filter out bcast events during this time to stop the devices being lost. Link: https://lore.kernel.org/r/1662378529-101489-6-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-07scsi: hisi_sas: Add helper to process bcast eventsJohn Garry5-13/+18
Add a helper for bcast processing to reduce duplication. Link: https://lore.kernel.org/r/1662378529-101489-5-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-07scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()John Garry1-0/+7
In resetting the controller, SATA devices may be lost. The issue is that when we insert the bcast events to rescan the topology in hisi_sas_rescan_topology(), when we subsequently nexus reset the SATA devices in hisi_sas_async_I_T_nexus_reset(), there is a small timing window in which the remote phy is down and we process the bcast event (meaning that libsas judges that the disk is lost). Ensure that all bcast events are processed prior to the nexus reset to close this window. Link: https://lore.kernel.org/r/1662378529-101489-4-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-07scsi: hisi_sas: Clear HISI_SAS_HW_FAULT_BIT earlierJohn Garry1-1/+1
Once the controller HW has been reset then we can unset flag HISI_SAS_HW_FAULT_BIT. In clearing this flag earlier we can now successfully execute commands in hisi_sas_controller_reset_done(), like bcast processing. Link: https://lore.kernel.org/r/1662378529-101489-3-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-07scsi: hisi_sas: Revert change to limit max hw sectors for v3 HWJohn Garry1-7/+0
Now that libsas and the SCSI core code limits the default sectors from commit 4cbfca5f7750 ("scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit") and commit 608128d391fa ("scsi: sd: allow max_sectors be capped at DMA optimal size limit"), there is no need for the hack to limit the max HW sectors. Link: https://lore.kernel.org/r/1662378529-101489-2-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22block: Change the return type of blk_mq_map_queues() into voidBart Van Assche2-7/+3
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0, change their return type into void. Most callers ignore the returned value anyway. Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Wang <jasowang@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org [axboe: fold in fix from Bart] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-19scsi: hisi_sas: Modify v3 HW SATA completion error processingXingui Yang1-1/+8
If the I/O completion response frame returned by the target device has been written to the host memory and the err bit in the status field of the received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will let EH analyze and further determine cause of failure. Link: https://lore.kernel.org/r/1657823002-139010-5-git-send-email-john.garry@huawei.com Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-19scsi: hisi_sas: Relocate DMA unmap of SMP taskXiang Chen4-7/+5
Currently SMP tasks are DMA unmapped only when cq of SMP I/O is returned normally. If the cq of SMP I/O is returned with exception actually SMP TAS is never unmapped. Relocate DMA unmap of SMP task to fix the issue. Link: https://lore.kernel.org/r/1657823002-139010-4-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-19scsi: hisi_sas: Remove unnecessary variable to hold DMA map elementsXiang Chen1-25/+18
Use slot->n_elem to store the return value of dma_map_sg() for SSP and SMP IOs, and remove unnecessary variable n_elem_req. Link: https://lore.kernel.org/r/1657823002-139010-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-19scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()John Garry1-4/+1
There is duplicated code between slave_configure_v3_hw() and hisi_sas_slave_configure(), so call common function hisi_sas_slave_configure() from slave_configure_v3_hw(). Link: https://lore.kernel.org/r/1657823002-139010-2-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-08Merge branch '5.19/scsi-fixes' into 5.20/scsi-stagingMartin K. Petersen1-0/+7
Bring in fixes to resolve a merge conflict in the lpfc driver update. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-28scsi: hisi_sas: Limit max hw sectors for v3 HWJohn Garry1-0/+7
If the controller is behind an IOMMU then the IOMMU IOVA caching range can affect performance, as discussed in [0]. Limit the max HW sectors to not exceed this limit. We need to hardcode the value until a proper DMA mapping API is available. [0] https://lore.kernel.org/linux-iommu/20210129092120.1482-1-thunder.leizhen@huawei.com/ Link: https://lore.kernel.org/r/1655988119-223714-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-22scsi: hisi_sas: Align commentsJiang Jian1-2/+2
Properly align comment lines in slot_index_alloc_quirk_v2_hw(). Link: https://lore.kernel.org/r/20220621072405.34394-1-jiangjian@cdjrlc.com Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-20scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()John Garry1-0/+2
The memories for the slot should be observed to be written prior to observing the slot as ready. Prior to commit 26fc0ea74fcb ("scsi: libsas: Drop SAS_TASK_AT_INITIATOR"), we had a spin_lock() + spin_unlock() immediately before marking the slot as ready. The spin_unlock() - with release semantics - caused the slot memory to be observed to be written. Now that the spin_lock() + spin_unlock() is gone, use a smp_wmb(). Link: https://lore.kernel.org/r/1652774661-12935-1-git-send-email-john.garry@huawei.com Fixes: 26fc0ea74fcb ("scsi: libsas: Drop SAS_TASK_AT_INITIATOR") Reported-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-20scsi: hisi_sas: Fix rescan after deleting a diskJohn Garry1-29/+18
Removing an ATA device via sysfs means that the device may not be found through re-scanning: root@ubuntu:/home/john# lsscsi [0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda [0:0:1:0] disk ATA HGST HUS724040AL A8B0 /dev/sdb [0:0:8:0] enclosu 12G SAS Expander RevB - root@ubuntu:/home/john# echo 1 > /sys/block/sdb/device/delete root@ubuntu:/home/john# echo "- - -" > /sys/class/scsi_host/host0/scan root@ubuntu:/home/john# lsscsi [0:0:0:0] disk SanDisk LT0200MO P404 /dev/sda [0:0:8:0] enclosu 12G SAS Expander RevB - root@ubuntu:/home/john# The problem is that the rescan of the device may conflict with the device in being re-initialized, as follows: - In the rescan we call hisi_sas_slave_alloc() in store_scan() -> sas_user_scan() -> [__]scsi_scan_target() -> scsi_probe_and_add_lunc() -> scsi_alloc_sdev() -> hisi_sas_slave_alloc() -> hisi_sas_init_device() In hisi_sas_init_device() we issue an IT nexus reset for ATA devices - That IT nexus causes the remote PHY to go down and this triggers a bcast event - In parallel libsas processes the bcast event, finds that the phy is down and marks the device as gone The hard reset issued in hisi_sas_init_device() is unncessary - as described in the code comment - so remove it. Also set dev status as HISI_SAS_DEV_NORMAL as the hisi_sas_init_device() call. Link: https://lore.kernel.org/r/1652354134-171343-4-git-send-email-john.garry@huawei.com Fixes: 36c6b7613ef1 ("scsi: hisi_sas: Initialise devices in .slave_alloc callback") Tested-by: Yihang Li <liyihang6@hisilicon.com> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-20scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus resetJohn Garry1-7/+12
We have seen errors like this when a SATA device is probed: [524.566298] hisi_sas_v3_hw 0000L74:02.0: erroneous completion iptt=4096 ... [524.582827] sas: TMF task open reject failed 500e004aaaaaaaa00 Since commit 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T nexus reset failure"), we issue an ATA softreset to disks after a phy reset to ensure that they are in sound working order. If the softreset is issued before the remote phy has come back up then the softreset will fail (errors as above). Remedy this by waiting for the phy to come back up after the reset. Link: https://lore.kernel.org/r/1652354134-171343-3-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-11scsi: hisi_sas: Undo RPM resume for failed notify phy event for v3 HWXiang Chen1-2/+8
If we fail to notify the phy up event then undo the RPM resume, as the phy up notify event handling pairs with that RPM resume. Link: https://lore.kernel.org/r/1651839939-101188-1-git-send-email-john.garry@huawei.com Reported-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-30scsi: hisi_sas: Remove stray fallthrough annotationDan Carpenter1-1/+0
This case statement doesn't fall through any more so remove the fallthrough annotation. Link: https://lore.kernel.org/r/20220317075214.GC25237@kili Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: hisi_sas: Use libsas internal abort supportJohn Garry4-319/+171
Use the common libsas internal abort functionality. In addition, this driver has special handling for internal abort timeouts - specifically whether to reset the controller in that instance, so extend the API for that. Timeout is now increased to 20 * Hz from 6 * Hz. We also retry for failure now, but this should not make a difference. Link: https://lore.kernel.org/r/1647001432-239276-5-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-28scsi: hisi_sas: Modify v3 HW SSP underflow error processingXingui Yang1-13/+26
In case of SSP underflow allow the response frame IU to be examined for setting the response stat value rather than always setting SAS_DATA_UNDERRUN. This will mean that we call sas_ssp_task_response() in those scenarios and may send sense data to upper layer. Such a condition would be for bad blocks were we just reporting an underflow error to upper layer, but now the sense data will tell immediately that the media is faulty. Link: https://lore.kernel.org/r/1645703489-87194-7-git-send-email-john.garry@huawei.com Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-28scsi: hisi_sas: Limit users changing debugfs BIST count valueXiang Chen1-2/+50
Add a file operation for "cnt" file under bist directory, so users can only read "cnt" or clear "cnt" to zero, but cannot randomly modify. Link: https://lore.kernel.org/r/1645703489-87194-6-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-28scsi: hisi_sas: Rename error labels in hisi_sas_v3_probe()Qi Liu1-10/+10
To avoid doubt, rename the error labels to indicate the action they will take. Link: https://lore.kernel.org/r/1645703489-87194-5-git-send-email-john.garry@huawei.com Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-28scsi: hisi_sas: Free irq vectors in order for v3 HWQi Liu1-5/+11
If the driver probe fails to request the channel IRQ or fatal IRQ, the driver will free the IRQ vectors before freeing the IRQs in free_irq(), and this will cause a kernel BUG like this: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:369! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: free_msi_irqs+0x118/0x13c pci_disable_msi+0xfc/0x120 pci_free_irq_vectors+0x24/0x3c hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw] local_pci_probe+0x44/0xb0 work_for_cpu_fn+0x20/0x34 process_one_work+0x1d0/0x340 worker_thread+0x2e0/0x460 kthread+0x180/0x190 ret_from_fork+0x10/0x20 ---[ end trace b88990335b610c11 ]--- So we use devm_add_action() to control the order in which we free the vectors. Link: https://lore.kernel.org/r/1645703489-87194-4-git-send-email-john.garry@huawei.com Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-28scsi: hisi_sas: Change hisi_sas_control_phy() phyup timeoutXiang Chen2-2/+3
The time of phyup not only depends on the controller but also the type of disk connected. As an example, from experience, for some SATA disks the amount of time from reset/power-on to receive the D2H FIS for phyup can take upto and more than 10s sometimes. According to the specification of some SATA disks such as ST14000NM0018, the max time from power-on to ready is 30s. Based on this the current timeout of phyup at 2s which is not enough. So set the value as HISI_SAS_WAIT_PHYUP_TIMEOUT (30s) in hisi_sas_control_phy(). For v3 hw there is a pre-existing workaround for a HW bug, being that we issue a link reset when the OOB occurs but the phyup does not. The current phyup timeout is HISI_SAS_WAIT_PHYUP_TIMEOUT. So if this does occur from when issuing a phy enable or similar via hisi_sas_control_phy(), the subsequent HW workaround linkreset processing calls hisi_sas_control_phy(), but this will pend the original phy reset timing out, so it is safe. Link: https://lore.kernel.org/r/1645703489-87194-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-28scsi: hisi_sas: Change permission of parameter prot_maskXiang Chen1-1/+1
Currently the permission of parameter prot_mask is 0x0, which means that the member does not appear in sysfs. Change it as other module parameters to 0444 for world-readable. [mkp: s/v3/v2/] Link: https://lore.kernel.org/r/1645703489-87194-2-git-send-email-john.garry@huawei.com Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw") Reported-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-23scsi: hisi_sas: Remove unnecessary print function dev_err()Yang Li1-12/+3
The print function dev_err() is redundant because platform_get_irq() already prints an error. Eliminate the follow coccicheck warnings: ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1661:3-10: line 1661 is redundant because platform_get_irq() already prints an error ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1642:4-11: line 1642 is redundant because platform_get_irq() already prints an error ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1679:3-10: line 1679 is redundant because platform_get_irq() already prints an error Link: https://lore.kernel.org/r/20220215020524.44268-1-yang.lee@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-23scsi: libsas: Add sas_execute_ata_cmd()John Garry2-129/+6
Add a function to execute an ATA command using the TMF code, and use in the hisi_sas driver. That driver needs to be able to issue the command on a specific phy, so add an interface for that. With that, hisi_sas_exec_internal_tmf_task() may be deleted. Link: https://lore.kernel.org/r/1645534259-27068-19-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_abort_task()John Garry1-26/+1
Add a generic implementation of abort task TMF handler, and use in LLDDs. With that, some LLDDs custom TMF functions can now be deleted. Link: https://lore.kernel.org/r/1645112566-115804-18-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_query_task()John Garry1-11/+1
Add a generic implementation of query task TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-17-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_lu_reset()John Garry1-3/+1
Add a generic implementation of LU reset TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-16-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_clear_task_set()John Garry1-4/+1
Add a generic implementation of clear task set TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-15-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_abort_task_set()John Garry1-4/+1
Add a generic implementation of abort task set TMF handler, and use in LLDDs. Link: https://lore.kernel.org/r/1645112566-115804-14-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add TMF handler aborted callbackJohn Garry1-0/+20
The hisi_sas and pm8001 TMF handlers have some special processing for when the TMF is aborted, so add a callback and fill it in for those drivers. Link: https://lore.kernel.org/r/1645112566-115804-13-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add sas_task.tmfJohn Garry1-10/+6
Add a pointer to a sas_tmf_task to the sas_task struct, as this will be used when the common LLDD TMF code is factored out. Also set it for the LLDDs to store per-sas_task TMF info. Link: https://lore.kernel.org/r/1645112566-115804-9-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Add struct sas_tmf_taskJohn Garry5-23/+16
Some of the LLDDs which use libsas have their own definition of a struct to hold TMF info, so add a common struct for libsas. Also add an interim force phy id field for hisi_sas driver, which will be removed once the STP "TMF" code is factored out. Even though some LLDDs (pm8001) use a u32 for the tag, u16 will be adequate, as that named driver only uses tags in range [0, 1024). Link: https://lore.kernel.org/r/1645112566-115804-8-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: hisi_sas: Delete unused I_T_NEXUS_RESET_PHYUP_TIMEOUTJohn Garry1-2/+0
There is no user, so delete it. Link: https://lore.kernel.org/r/1645112566-115804-6-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-19scsi: libsas: Delete lldd_clear_aca callbackJohn Garry1-12/+0
This callback is never called, so remove support. Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 20:50:54 +0300