summaryrefslogtreecommitdiff
path: root/drivers/scsi/bnx2i
AgeCommit message (Collapse)AuthorFilesLines
2021-08-12scsi: bnx2i: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche1-1/+1
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-17-bvanassche@acm.org Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Fix shost->max_id useMike Christie1-1/+1
The iscsi offload drivers are setting the shost->max_id to the max number of sessions they support. The problem is that max_id is not the max number of targets but the highest identifier the targets can have. To use it to limit the number of targets we need to set it to max sessions - 1, or we can end up with a session we might not have preallocated resources for. Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Rel ref after iscsi_lookup_endpoint()Mike Christie1-7/+16
Subsequent commits allow the kernel to do ep_disconnect. In that case we will have to get a proper refcount on the ep so one thread does not delete it from under another. Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Drop suspend calls from ep_disconnectMike Christie1-5/+1
libiscsi will now suspend the send/tx queue for the drivers so we can drop it from the drivers ep_disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-4-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Stop queueing during ep_disconnectMike Christie1-0/+1
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new I/O but every driver except cxgbi and iscsi_tcp can still get I/O from __iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before ep_disconnect. This could happen if we were terminating the session, and the logout timed out before it was even sent to libiscsi. Fix the issue by adding a helper which reverses the bind_conn call that allows new I/O to be queued. Drivers implementing ep_disconnect can use this to make sure new I/O is not queued to them when handling the disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-25scsi: bnx2i: Make bnx2i_process_iscsi_error() simpler and more robustRasmus Villemoes1-44/+41
Instead of strcpy'ing into a stack buffer, just let additional_notice point to a string literal living in .rodata. This is better in a few ways: - Smaller .text - instead of gcc compiling the strcpys as a bunch of immediate stores (effectively encoding the string literal in the instruction stream), we only pay the price of storing the literal in .rodata. - Faster, because there's no string copying. - Smaller stack usage (with my compiler, 72 bytes instead of 176 for the sole caller, bnx2i_indicate_kcqe) Moreover, it's currently possible for additional_notice[] to get used uninitialized, so some random stack garbage would be passed to printk() - in the worst case without any '\0' anywhere in those 64 bytes. That could be fixed by initializing additional_notice[0], but the same is achieved here by initializing the new pointer variable to "". Also give the message pointer a similar treatment - there's no point making temporary copies on the stack of those two strings. Link: https://lore.kernel.org/r/20210310221602.2494422-1-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: bnx2i: Fix bnx2i_set_ccell_info()'s name in descriptionLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_sysfs.c:118: warning: expecting prototype for bnx2i_get_link_state(). Prototype was for bnx2i_set_ccell_info() instead Link: https://lore.kernel.org/r/20210312094738.2207817-23-lee.jones@linaro.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-09scsi: libiscsi: Fix iscsi_task use after free()Mike Christie1-2/+0
The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-02scsi: bnx2i: Requires MMURandy Dunlap1-0/+1
The SCSI_BNX2_ISCSI kconfig symbol selects CNIC and CNIC selects UIO, which depends on MMU. Since 'select' does not follow dependency chains, add the same MMU dependency to SCSI_BNX2_ISCSI. Quietens this kconfig warning: WARNING: unmet direct dependencies detected for CNIC Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) && MMU [=n] Selected by [m]: - SCSI_BNX2_ISCSI [=m] && SCSI_LOWLEVEL [=y] && SCSI [=y] && NET [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) Link: https://lore.kernel.org/r/20201129070916.3919-1-rdunlap@infradead.org Fixes: cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.") Cc: linux-scsi@vger.kernel.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-09-23scsi: bnx2i: Remove unnecessary mutex_init()Qinglang Miao1-2/+0
The mutex bnx2i_dev_lock is initialized statically. It is unnecessary to initialize by mutex_init(). Link: https://lore.kernel.org/r/20200916062133.191000-1-miaoqinglang@huawei.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: bnx2i: Add parameter description and rename anotherLee Jones1-1/+2
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_iscsi.c:1288: warning: Function parameter or member 'cmds_max' not described in 'bnx2i_session_create' drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path' Link: https://lore.kernel.org/r/20200723122446.1329773-40-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: bnx2i: Add, remove and edit some function parameter descriptionsLee Jones1-9/+7
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_bind_conn_to_iscsi_cid' drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Excess function parameter 'conn' description in 'bnx2i_bind_conn_to_iscsi_cid' drivers/scsi/bnx2i/bnx2i_iscsi.c:470: warning: Excess function parameter 'cmd' description in 'bnx2i_destroy_cmd_pool' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Function parameter or member 'cls_session' not described in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'hba' description in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'session' description in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:1290: warning: Function parameter or member 'ep' not described in 'bnx2i_session_create' drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Function parameter or member 'bnx2i_ep' not described in 'bnx2i_ep_tcp_conn_active' drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Excess function parameter 'ep' description in 'bnx2i_ep_tcp_conn_active' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'shost' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path' Link: https://lore.kernel.org/r/20200723122446.1329773-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: bnx2i: Fix a whole host of kerneldoc issuesLee Jones1-26/+27
Mainly renames and docrot issues. Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_get_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Excess function parameter 'conn' description in 'bnx2i_get_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_put_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Excess function parameter 'conn' description in 'bnx2i_put_rq_buf' drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_sq_dbell' drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Excess function parameter 'conn' description in 'bnx2i_ring_sq_dbell' drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_dbell_update_sq_params' drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Excess function parameter 'conn' description in 'bnx2i_ring_dbell_update_sq_params' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_login' drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_tmf' drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_tmf' drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_text' drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_text' drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_scsicmd' drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_scsicmd' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_nopout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_logout' drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Function parameter or member 't' not described in 'bnx2i_ep_ofld_timer' drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Excess function parameter 'data' description in 'bnx2i_ep_ofld_timer' drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_unsol_pdu_adjust_rq' drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Excess function parameter 'conn' description in 'bnx2i_unsol_pdu_adjust_rq' drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'session' not described in 'bnx2i_queue_scsi_cmd_resp' drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'cqe' not described in 'bnx2i_queue_scsi_cmd_resp' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'context' not described in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'kcqe' not described in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'num_cqe' not described in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'hba' description in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_indicate_kcqe' drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_close' drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_close' drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_close' drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_abort' drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_abort' drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_abort' drivers/scsi/bnx2i/bnx2i_hwi.c:2677: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2i_cnic_cb = ' Link: https://lore.kernel.org/r/20200723122446.1329773-29-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: bnx2i: Add missing descriptions for 'attr' parameterLee Jones1-0/+4
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_sysfs.c:40: warning: Function parameter or member 'attr' not described in 'bnx2i_show_sq_info' drivers/scsi/bnx2i/bnx2i_sysfs.c:60: warning: Function parameter or member 'attr' not described in 'bnx2i_set_sq_info' drivers/scsi/bnx2i/bnx2i_sysfs.c:96: warning: Function parameter or member 'attr' not described in 'bnx2i_show_ccell_info' drivers/scsi/bnx2i/bnx2i_sysfs.c:114: warning: Function parameter or member 'attr' not described in 'bnx2i_set_ccell_info' Link: https://lore.kernel.org/r/20200723122446.1329773-9-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-25scsi: bnx2i: Fix parameter misnaming in function headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Function parameter or member 'dev' not described in 'bnx2i_identify_device' drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Excess function parameter 'cnic' description in 'bnx2i_identify_device' Link: https://lore.kernel.org/r/20200723122446.1329773-5-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-2/+2
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-11-20scsi: bnx2i: fix potential use after freePan Bian1-1/+1
The member hba->pcidev may be used after its reference is dropped. Move the put function to where it is never used to avoid potential use after free issues. Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr") Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-3/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08drivers: Remove useless trailing comments from mmiowb() invocationsWill Deacon1-1/+1
In preparation for using coccinelle to remove all mmiowb() instances from drivers, remove all trailing comments since they won't be picked up by spatch later on and will end up being preserved in the code. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+1
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-01-09scsi: bnx2i: fix indentation issue, remove a tabColin Ian King1-1/+1
The return statement is indented incorrectly, fix this by removing a single tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-4/+4
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-29Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-3/+0
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-19scsi: flip the default on use_clusteringChristoph Hellwig1-1/+0
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-22scsi: bnx2i: remove set but not used variable 'cid_num'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/bnx2i/bnx2i_hwi.c: In function 'bnx2i_process_ofld_cmpl': drivers/scsi/bnx2i/bnx2i_hwi.c:2430:6: warning: variable 'cid_num' set but not used [-Wunused-but-set-variable] It never used since commit cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-07block: kill request ->cpu memberJens Axboe1-7/+1
This was used for completion placement for the legacy path, but for mq we have rq->mq_ctx->cpu for that. Add a helper to get the request CPU assignment, as the mq_ctx type is private to blk-mq. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-20scsi: bnx2i: add error handling for ioremap_nocacheZhouyang Jia1-0/+2
When ioremap_nocache fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling ioremap_nocache. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-04scsi: bnx2i: Use zeroing allocator rather than allocator/memsetHimanshu Jha1-6/+4
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-05scsi: bnx2i: bnx2i_hwi: use swap macro in bnx2i_send_iscsi_nopoutGustavo A. R. Silva1-6/+3
Make use of the swap macro and remove unnecessary variable tmp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-10/+0
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...
2017-10-27scsi: bnx2i: Convert timers to use timer_setup()Kees Cook3-14/+7
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. There was a seemingly missing call to initialize the timer in one handler, so this was added to remove the open-coded initialization. Cc: QLogic-Storage-Upstream@qlogic.com Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-15scsi: bnx2i: Clean up unused pointers in bnx2i_hwiChristos Gkekas1-10/+0
Pointers bnx2i_cmd are set but never used, so they can be removed. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-27scsi: bnx2i: Simplify cpu hotplug codeThomas Gleixner1-50/+15
The CPU hotplug related code of this driver can be simplified by: 1) Consolidating the callbacks into a single state. The CPU thread can be torn down on the CPU which goes offline. There is no point in delaying that to the CPU dead state 2) Let the core code invoke the online/offline callbacks and remove the extra for_each_online_cpu() loops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-27scsi: bnx2i: Prevent recursive cpuhotplug lockingThomas Gleixner1-7/+8
The BNX2I module init/exit code installs/removes the hotplug callbacks with the cpu hotplug lock held. This worked with the old CPU locking implementation which allowed recursive locking, but with the new percpu rwsem based mechanism this is not longer allowed. Use the _cpuslocked() variants to fix this. Reported-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26scsi: bnx2i: missing error code in bnx2i_ep_connect()Dan Carpenter1-1/+2
If bnx2i_map_ep_dbell_regs() then we accidentally return NULL instead of an error pointer. It results in a NULL dereference in iscsi_if_ep_connect(). Fixes: cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig1-0/+1
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-12-25scsi/bnx2i: Convert to hotplug state machineSebastian Andrzej Siewior1-48/+30
Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.836895753@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-13bnx2i: fix spelling mistake "complection" -> "completion"Colin Ian King1-1/+1
Trivial fix to spelling mistake in printk message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-26bnx2i: silence uninitialized variable warningsDan Carpenter1-2/+2
Presumably it isn't possible to have empty lists here, but my static checker doesn't know that and complains that "ep" can be used uninitialized. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-06-03bnx2i: Fix call trace while device resetNilesh Javali1-0/+2
The driver waits for command completion event while cleanup of task within the frwd lock and back locks. The frwd lock was still held which caused the call trace while issuing a device reset. Release the frwd lock along with the back lock to avoid waiting in the lock context. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-03bnx2i: Fixed firmware assert, during target logout.Tej Parkash1-1/+2
Fix the firmware assert, during target logout in case driver received FIN from target before waiting for asyncronous response. Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-1/+1
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-0/+1
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-10-08Merge tag 'scsi-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (megaraid_sas, arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several assorted fixes and miscellaneous updates (including the pci_msix_enable_range() changes that have been pending for a while)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits) scsi: add a CONFIG_SCSI_MQ_DEFAULT option ufs: definitions for phy interface ufs: tune bkops while power managment events ufs: Add support for clock scaling using devfreq framework ufs: Add freq-table-hz property for UFS device ufs: Add support for clock gating ufs: refactor configuring power mode ufs: add UFS power management support ufs: introduce well known logical unit in ufs ufs: manually add well known logical units ufs: Active Power Mode - configuring bActiveICCLevel ufs: improve init sequence ufs: refactor query descriptor API support ufs: add voting support for host controller power ufs: Add clock initialization support ufs: Add regulator enable support ufs: Allow vendor specific initialization scsi: don't add scsi_device if its already visible scsi: fix the type for well known LUs scsi: fix comment in struct Scsi_Host definition ...
2014-09-16bnx2i: Make boot_nic entry visible in the sysfs session objectsTej Parkash1-0/+3
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16bnx2i/bnx2fc : fix randconfig error in next-20140909Anish Bhatt1-0/+1
Just like CNIC, tristate of these two modules is also dependent on IPV6. These need to be handled separately as they select CNIC, which can override tristate for CNIC from 'm' to 'y', which can cause build failures when ipv6 is compiled as a module even if CNIC's Kconfig will only 'm' or 'n' when ipv6 is compiled as a module. Fixes: c99d667e8527 ("cnic : Cleanup CONFIG_IPV6 & VLAN check") Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-26bnx2i: Update driver version to 2.7.10.1Vikas Chaudhary1-2/+2
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-14 10:49:20 +0300