summaryrefslogtreecommitdiff
path: root/drivers/scsi/be2iscsi
AgeCommit message (Collapse)AuthorFilesLines
2014-03-15[SCSI] be2iscsi : Bump the driver versionJayamohan Kallickal1-1/+1
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi : Fix DMA Out of SW-IOMMU space errorJayamohan Kallickal1-2/+13
Setting DMA bit mask 64 and roll back to 32 if not supported. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix scsi_cmnd leakage in driver.Jayamohan Kallickal1-1/+9
scsi_cmnd n io_task was not NULL when - Link goes down while IO was happening and session is closed. - Task for which TMF was sent. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix the session cleanup when reboot/shutdown happensJayamohan Kallickal6-1/+26
In iSCSI Boot scenario, when machine is reboot/shutdown phase the active sessions are not closed. Driver queue cleanup is done as part of unload and device is disabled. Sessions are still active, iSCSI commands are issued from session which comes to driver, as driver cleanup and device disabled there is kernel stack dump with errors. Fix is invoking iscsi_session_failure with ISCSI_ERR_INVALID_HOST on all the active sessions when shutdown routine is called. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix doorbell format for EQ/CQ/RQ s per SLI spec.Jayamohan Kallickal4-21/+40
The doorbel format has been updated to support additonal functionalities of SKH-R adapter. These changes are made such that older FW also works fine. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix port speed typo in driver.Jayamohan Kallickal1-1/+1
The 100Mbps port speed macro used was not proper. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix handling timed out MBX completion from FWJayamohan Kallickal6-45/+117
When an MBX command timeout happens,the resources associated with the MBX command were freed. If FW were to give the response to host after the timeout value set by driver then driver crashes as the MBX Cmd resources were already freed. This patch fixes this issue by maintaing a state flag for each of the MBX command posted/timedout/completed. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-10[SCSI] be2iscsi: fix bad if expressionMike Christie1-1/+1
https://bugzilla.kernel.org/show_bug.cgi?id=67091 Cc: Jayamohan Kallickal <Jayamohan.Kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] be2iscsi: fix memory leak in error pathGeyslan G. Bem1-5/+3
There are two memory leaks in cases 'ISCSI_NET_PARAM_VLAN_ID' and 'ISCSI_NET_PARAM_VLAN_PRIORITY' and also a potential junk pointer free if mgmt_get_if_info() returns error because if_info will be unset and it is stack allocated. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Bump driver versionJayamohan Kallickal1-1/+1
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix SGL posting for unaligned ICD valuesJayamohan Kallickal2-5/+58
If certain configuration it is possible that ICD range is not page-aligned. SGL posting failed in these configuration and driver load was not success. This fix aligns ICD range values and SGL posting for IO is done. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix AER handling in driverJayamohan Kallickal4-29/+270
Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Invalidate WRB in Abort/Reset PathJayamohan Kallickal1-0/+10
When iSCSI stack invokes Abort or Reset handlers, the aborted tasks Invalid Bit in WRB needs to be set. Else FW will not be aware of the command invalidated which leads to BAD_WRB error posted by FW. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix Insufficient Buffer Error returned in MBX CompletionJayamohan Kallickal4-43/+99
When MBX_Cmd completion happens with error code Insufficient Buffer, the MBX_Cmd is posted again with the new buffer size posted by FW. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix log level for protocol specific logsJayamohan Kallickal2-3/+9
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix MSIx creation for SKH-R adapterJayamohan Kallickal3-17/+42
The MSIx to be created for SKH-R adapter should be based on eq_count returned by get_fw_config. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Display Port Identifier for each iSCSI functionJayamohan Kallickal3-0/+24
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Dispaly CID available for connection offloadJayamohan Kallickal3-6/+44
Display CID available on each iSCSI Fn which can be used to offload a connection. The display is split across available CID on each chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix chute cleanup during drivers unload.Jayamohan Kallickal2-8/+23
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix connection offload to support Dual Chute.Jayamohan Kallickal4-8/+31
The connection is offload to each chute in a round-robin manner if both the chute is loaded with iSCSI protocol Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix CID allocation/freeing to support Dual chute modeJayamohan Kallickal4-38/+160
Configuration parameters returns the number of connection that can be offloaded one each chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix WRB_Q posting to support Dual Chute modeJayamohan Kallickal4-25/+89
Configuration parameters return number of CID each chute supports. The WRB_Q is created for the passed CID count. If both the Chute has iSCSI Protocol then WRB_Q creation is in a round robin mechanism. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix SGL Initilization and posting Pages for Dual ChuteJayamohan Kallickal1-4/+13
Initialization of SGL and related PAGE posting is to be done for the chute. Based on configuration value of each Chute,SGL initialization and page posting is done. For BE-X family iSCSI protocol is loaded only on single chute Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix Template HDR support for Dual Chute modeJayamohan Kallickal2-23/+33
Template HDR is created for each chute which has iSCSI Protocol loaded. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix changes in ASYNC Path for SKH-R adapterJayamohan Kallickal5-293/+516
DEF_Q[HDR/DATA] is created on the chute on which iSCSI Protocol is loaded. When a connection is offloaded, the DEF_Q HDR/Data ID needs to be passed. FW posts ASYNC message received from target on the passed DEF_Q. Connection can be offloaded on any of the chute so DEF_Q is created on each Chute. Change in the ASYNC path initialization based on the configuration parameters returned for each chute. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Config parameters update for Dual Chute SupportJayamohan Kallickal4-53/+128
On the adapter iSCSI protocol can be loaded on either one or both the CHUTE.Check on which CHUTE iSCSI Protocol is loaded and get configuration parameters based on which driver initization is done. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix soft lock up issue during UE or if FW taking time to ↵Jayamohan Kallickal3-21/+34
respond The timeout set in MBX_CMD is 100sec and the ready bit checking in BMBX mode is done for 4sec. After 4sec the task is scheduled out for 5 secs to avoid kernel soft lockup stack trace. The loop of 4sec ready bit check and then schedule out is done until the following conditon occur - The Ready Bit is Set - The timeout set in MBX_CMD expires Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix locking mechanism in Unsol PathJayamohan Kallickal2-0/+8
The default pdu is a common resource and needs to be protected while manipulating it. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix negotiated parameters upload to FWJayamohan Kallickal3-20/+24
- Removed the check of MaxXmitDSL == 0 as this is not a possible case. - Update connection offload data structure for SKH-R adapters. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix repeated issue of MAC ADDR get IOCTLJayamohan Kallickal3-1/+4
Storing MAC ADDR of each function in it's priv structure to avoid issuing MAC_ADDR get IOCTL. Based on a flag set/unset it's decided if MAC_ADDR is stored in priv structure or IOCTL needs to be issued. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix the MCCQ count leakageJayamohan Kallickal1-1/+5
When MBX CMD is posted in MCCQ and if command times out,during mccq resource cleanup for the timed out command mccq->count was not decremented. The led to BUG_ON being hit. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix Template HDR IOCTLJayamohan Kallickal4-0/+116
Allocating memory in the Host which will be used by the TOE functionality during Session Offload. This fix will allow performance improvement as adapter memory contention will be reduced. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-04drivers: avoid format strings in names passed to alloc_workqueue()Kees Cook1-1/+1
For the workqueue creation interfaces that do not expect format strings, make sure they cannot accidently be parsed that way. Additionally, clean up calls made with a single parameter that would be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-02[SCSI] be2iscsi: Bump the driver version to 10.0.467.0Jayamohan Kallickal1-1/+1
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix issue in passing the exp_cmdsn and max_cmdsnJayamohan Kallickal1-8/+9
Command Window value from the CQE was used to calculate the max_cmdsn for that session.The command window value extracted for SKH-R adapter was not proper. The value was extracted from BE adapter completion event. Fixed the issue by getting the cmd_wnd value from SKH-R CQE. The exp_cmdsn and max_cmdsn values were not converted to BE format before calling the __iscsi_complete_pdu(). Fixed the issue of converting to BE format. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix possible reentrancy issue in be_iopollShlomo Pongratz1-1/+1
The driver creates "NAPI" context per core which is fine, however the above routine declares the ret variable as static! Thus there is only one instance of this variable! When this routine is called from more than one thread of execution, than the result is unpredictable. static unsigned int ret; ..... ret = beiscsi_process_cq(pbe_eq); <--------Another thread can enter here and change "ret". if (ret < budget) { .... } <--------Another thread can enter here and change "ret". return ret; Fix - remove the "static" Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2scsi: Update copyright dates to 2013Jayamohan Kallickal9-9/+9
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix checking Adapter state while establishing CXNJayamohan Kallickal1-0/+7
Before tyring to establish a CXN with the target, check if the adapter is in a stable state Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix dynamic CID allocation Mechanism in driverJayamohan Kallickal3-70/+133
Number of CID assigned to a function from adapter can be dynamic. The CID count for each function was fixed number before. Code Fix done so that adapters with fixed/dynamic CID count will work with the driver. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi : Fix the NOP-In handling code pathJayamohan Kallickal3-15/+12
When target send a NOP-IN with valid TTT, driver issues a NOP-OUT and the task was not freed from driver. The task list available for the session used to run out, and as no more task list were available no more iSCSI commands were exchanged on that session. This patches fixed the issue, by calling iscsi_put_task. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix the Port Link Status issueJayamohan Kallickal2-16/+16
Check the Logical Link status also as part of the port link status. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix displaying the Active Session Count from driverJayamohan Kallickal3-0/+25
This patch fixes the displaying of number of active sessions in use. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix displaying the FW Version from driver.Jayamohan Kallickal4-13/+42
The mgmt_hba_attributes structure declared was not proper and because of that the FW response returned for the MBX_CMD was not matching. This issue went unnoticed as mgmt_hba_attribs structure members were never used in the code path. This fix of displaying the FW version had to change the mgmt_hba_attrib structure also. The latest driver will also work with the older FW as the issue was in the driver declaration. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix support for DEFQ extensionJayamohan Kallickal2-12/+44
Fix support for DEFQ extension which will be used by latest adapters Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix MACRO for checking the adapter typeJayamohan Kallickal3-76/+79
Fixed the code flow based on the MACRO defined to check for adapter. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix freeing CXN specific driver resources.Jayamohan Kallickal3-22/+62
Free CXN specific resource held by driver when login redirection or connection retry happens. Login redirection was failing because WRB/SGL were not allocated from the CID on which doorbell was rung. Fixed the issue raised by MikeC Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix MSIX support in SKH-R to 32Jayamohan Kallickal2-1/+2
This patch limits the max number of msix vectors to 32. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix MBX Command issuesJayamohan Kallickal2-5/+12
- Check Ready Bit before posting the BMBX Hi Address - Fix the parameters passed to beiscsi_mccq_compl in beiscsi_open_conn() - Fix tag value check in beiscsi_ep_connect. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix returning Failure when MBX fails with Insufficient ↵Jayamohan Kallickal2-0/+17
buffer error When MBX command fails with insufficent buffer, check for the response lenght returned. Return success if response length is non-zero value which indicates valid data. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2iscsi: Fix lack of uninitialize pattern to FWJayamohan Kallickal3-0/+53
This patch sends uninitialize pattern to FW during driver unload which is expected by FW for cleanup Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-14 07:46:00 +0300