summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2023-05-24s390/qdio: fix do_sqbs() inline assembly constraintHeiko Carstens1-1/+1
commit 2862a2fdfae875888e3c1c3634e3422e01d98147 upstream. Use "a" constraint instead of "d" constraint to pass the state parameter to the do_sqbs() inline assembly. This prevents that general purpose register zero is used for the state parameter. If the compiler would select general purpose register zero this would be problematic for the used instruction in rsy format: the register used for the state parameter is a base register. If the base register is general purpose register zero the contents of the register are unexpectedly ignored when the instruction is executed. This only applies to z/VM guests using QIOASSIST with dedicated (pass through) QDIO-based devices such as FCP [zfcp driver] as well as real OSA or HiperSockets [qeth driver]. A possible symptom for this case using zfcp is the following repeating kernel message pattern: zfcp <devbusid>: A QDIO problem occurred zfcp <devbusid>: A QDIO problem occurred zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W zfcp <devbusid>: A QDIO problem occurred zfcp <devbusid>: A QDIO problem occurred Each of the qdio problem message can be accompanied by the following entries for the affected subchannel <sc> in /sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth: <sc> ccq: 69.... <sc> SQBS ERROR. Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Cc: Steffen Maier <maier@linux.ibm.com> Fixes: 8129ee164267 ("[PATCH] s390: qdio V=V pass-through") Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24s390/dasd: fix command reject error on ESE devicesStefan Haberland1-2/+31
commit c99bff34290f1b994073557b754aff86e4c7b22e upstream. Formatting a thin-provisioned (ESE) device that is part of a PPRC copy relation might fail with the following error: dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09 [...] 24 Byte: 0 MSG 4, no MSGb to SYSOP During format of an ESE disk the Release Allocated Space command is used. A bit in the payload of the command is set that is not allowed to be set for devices in a copy relation. This bit is set to allow the partial release of an extent. Check for the existence of a copy relation before setting the respective bit. Fixes: 91dc4a197569 ("s390/dasd: Add new ioctl to release space") Cc: stable@kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24s390/cio: include subchannels without devices also for evaluationVineeth Vijayan1-0/+2
[ Upstream commit b1b0d5aec1cf9f9a900a14964f869c68688d923e ] Currently when the new channel-path is enabled, we do evaluation only on the subchannels with a device connected on it. This is because, in the past, if the device in the subchannel is not working or not available, we used to unregister the subchannels. But, from the 'commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")' we allow subchannels with or without an active device connected on it. So, when we do the io_subchannel_verify, make sure that, we are evaluating the subchannels without any device too. Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11s390/dasd: fix hanging blockdevice after request requeueStefan Haberland1-1/+1
commit d8898ee50edecacdf0141f26fd90acf43d7e9cd7 upstream. The DASD driver does not kick the requeue list when requeuing IO requests to the blocklayer. This might lead to hanging blockdevice when there is no other trigger for this. Fix by automatically kick the requeue list when requeuing DASD requests to the blocklayer. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06s390/vfio-ap: fix memory leak in vfio_ap device driverTony Krowiak1-1/+2
[ Upstream commit 8f8cf767589f2131ae5d40f3758429095c701c84 ] The device release callback function invoked to release the matrix device uses the dev_get_drvdata(device *dev) function to retrieve the pointer to the vfio_matrix_dev object in order to free its storage. The problem is, this object is not stored as drvdata with the device; since the kfree function will accept a NULL pointer, the memory for the vfio_matrix_dev object is never freed. Since the device being released is contained within the vfio_matrix_dev object, the container_of macro will be used to retrieve its pointer. Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver") Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10s390: vfio-ap: tighten the NIB validity checkHalil Pasic1-0/+2
[ Upstream commit a64a6d23874c574d30a9816124b2dc37467f3811 ] The NIB is architecturally invalid if the address designates a storage location that is not installed or if it is zero. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reported-by: Janosch Frank <frankja@linux.ibm.com> Fixes: ec89b55e3bce ("s390: ap: implement PAPQ AQIC interception in kernel") Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10s390/vfio-ap: fix an error handling path in vfio_ap_mdev_probe_queue()Christophe JAILLET1-2/+8
[ Upstream commit 08866d34c7099e981918d34aab5d6a437436628f ] The commit in Fixes: has switch the order of a sysfs_create_group() and a kzalloc(). It correctly removed the now useless kfree() but forgot to add a sysfs_remove_group() in case of (unlikely) memory allocation failure. Add it now. Fixes: 260f3ea14138 ("s390/vfio-ap: move probe and remove callbacks to vfio_ap_ops.c") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/d0c0a35eec4fa87cb7f3910d8ac4dc0f7dc9008a.1659283738.git.christophe.jaillet@wanadoo.fr Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10s390/early: fix sclp_early_sccb variable lifetimeAlexander Gordeev1-1/+1
[ Upstream commit 639886b71ddef085a0e7bb1f225b8ae3eda5c06f ] Commit ada1da31ce34 ("s390/sclp: sort out physical vs virtual pointers usage") fixed the notion of virtual address for sclp_early_sccb pointer. However, it did not take into account that kasan_early_init() can also output messages and sclp_early_sccb should be adjusted by the time kasan_early_init() is called. Currently it is not a problem, since virtual and physical addresses on s390 are the same. Nevertheless, should they ever differ, this would cause an invalid pointer access. Fixes: ada1da31ce34 ("s390/sclp: sort out physical vs virtual pointers usage") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10s390/dasd: Fix potential memleak in dasd_eckd_init()Qiheng Lin1-1/+3
[ Upstream commit 460e9bed82e49db1b823dcb4e421783854d86c40 ] `dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it also needs to be freed before the error returns, just like the other cases in this function. Fixes: 9e12e54c7a8f ("s390/dasd: Handle out-of-space constraint") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Link: https://lore.kernel.org/r/20221208133809.16796-1-linqiheng@huawei.com Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20230210000253.1644903-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09use less confusing names for iov_iter direction initializersAl Viro1-1/+1
[ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ] READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Stable-dep-of: 6dd88fd59da8 ("vhost-scsi: unbreak any layout for response") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-09zcore: WRITE is "data source", not destination...Al Viro1-1/+1
[ Upstream commit 4ba48e1bae5f68af24d8d71d4f28de9eb658af1d ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Stable-dep-of: 6dd88fd59da8 ("vhost-scsi: unbreak any layout for response") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18block: handle bio_split_to_limits() NULL returnJens Axboe1-0/+2
commit 613b14884b8595e20b9fac4126bf627313827fbe upstream. This can't happen right now, but in preparation for allowing bio_split_to_limits() returning NULL if it ended the bio, check for it in all the callers. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31s390/lcs: Fix return type of lcs_start_xmit()Nathan Chancellor1-5/+3
[ Upstream commit bb16db8393658e0978c3f0d30ae069e878264fa3 ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31s390/netiucv: Fix return type of netiucv_tx()Nathan Chancellor1-8/+1
[ Upstream commit 88d86d18d7cf7e9137c95f9d212bb9fff8a1b4be ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = netiucv_tx, ^~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31s390/ctcm: Fix return type of ctc{mp,}m_tx()Nathan Chancellor1-9/+2
[ Upstream commit aa5bf80c3c067b82b4362cd6e8e2194623bcaca6 ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcm_tx, ^~~~~~~ drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcmpc_tx, ^~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08s390/qeth: fix use-after-free in hsciAlexandra Winter1-1/+1
KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >00000000fdcea400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ 00000000fdcea480: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea500: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ================================================================== Fixes: f7936b7b2663 ("s390/qeth: Update MACs of LEARNING_SYNC device") Reported-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Link: https://lore.kernel.org/r/20221207105304.20494-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-26Merge tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linuxLinus Torvalds3-24/+23
Pull block fixes from Jens Axboe: - A few fixes for s390 sads (Stefan, Colin) - Ensure that ublk doesn't reorder requests, as that can be problematic on devices that need specific ordering (Ming) - Fix a queue reference leak in disk allocation handling (Christoph) * tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux: ublk_drv: don't forward io commands in reserve order s390/dasd: fix possible buffer overflow in copy_pair_show s390/dasd: fix no record found for raw_track_access s390/dasd: increase printing of debug data payload s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid" blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
2022-11-25Merge tag 's390-6.1-6' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Fix size of incorrectly increased from four to eight bytes TOD field of crash dump save area. As result in case of kdump NT_S390_TODPREG ELF notes section contains correct value and "detected read beyond size of field" compiler warning goes away. - Fix memory leak in cryptographic Adjunct Processors (AP) module on initialization failure path. - Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander Gordeev <agordeev@linux.ibm.com> as S390 memory management maintainers. Also rename the S390 section to S390 ARCHITECTURE to be a bit more precise. * tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: add S390 MM section s390/crashdump: fix TOD programmable field size s390/ap: fix memory leak in ap_init_qci_info()
2022-11-23s390/dasd: fix possible buffer overflow in copy_pair_showStefan Haberland1-1/+1
dasd_copy_relation->entry[] array might be accessed out of bounds if the loop does not break. Fixes: a91ff09d39f9 ("s390/dasd: add copy pair setup") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20221123160719.3002694-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-23s390/dasd: fix no record found for raw_track_accessStefan Haberland1-4/+2
For DASD devices in raw_track_access mode only full track images are read and written. For this purpose it is not necessary to do search operation in the locate record extended function. The documentation even states that this might fail if the searched record is not found on a track. Currently the driver sets a value of 1 in the search field for the first record after record zero. This is the default for disks not in raw_track_access mode but record 1 might be missing on a completely empty track. There has not been any problem with this on IBM storage servers but it might lead to errors with DASD devices on other vendors storage servers. Fix this by setting the search field to 0. Record zero is always available even on a completely empty track. Fixes: e4dbb0f2b5dd ("[S390] dasd: Add support for raw ECKD access.") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20221123160719.3002694-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-23s390/dasd: increase printing of debug data payloadStefan Haberland1-18/+19
32 byte are to less for important data from prefix or other commands. Print up to 128 byte data. This is enough for the largest CCW data we have. Since printk can only print up to 1024 byte at once, print the different parts of the CCW dumps separately. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20221123160719.3002694-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-23s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"Colin Ian King1-1/+1
There is a spelling mistake in a pr_warn message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220923132103.2486724-1-colin.i.king@gmail.com Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20221123160719.3002694-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-23s390/ap: fix memory leak in ap_init_qci_info()Wei Yongjun1-1/+4
If kzalloc() for 'ap_qci_info_old' failed, 'ap_qci_info' shold be freed before return. Otherwise it is a memory leak. Link: https://lore.kernel.org/r/20221114110830.542246-1-weiyongjun@huaweicloud.com Fixes: 283915850a44 ("s390/ap: notify drivers on config changed and scan complete callbacks") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-11-20Merge tag 'scsi-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five small fixes, all in drivers. Most of these are error leg freeing issues, with the only really user visible one being the zfcp fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix possible memory leak when device_register() failed scsi: zfcp: Fix double free of FSF request when qdio send fails scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper() scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus() scsi: mpi3mr: Suppress command reply debug prints
2022-11-17scsi: zfcp: Fix double free of FSF request when qdio send failsBenjamin Block1-1/+1
We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache the FSF request ID when sending a new FSF request. This is used in case the sending fails and we need to remove the request from our internal hash table again (so we don't keep an invalid reference and use it when we free the request again). In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32 bit wide), but the rest of the zfcp code (and the firmware specification) handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x ELF ABI]). For one this has the obvious problem that when the ID grows past 32 bit (this can happen reasonably fast) it is truncated to 32 bit when storing it in the cache variable and so doesn't match the original ID anymore. The second less obvious problem is that even when the original ID has not yet grown past 32 bit, as soon as the 32nd bit is set in the original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we cast it back to 'unsigned long'. As the cached variable is of a signed type, the compiler will choose a sign-extending instruction to load the 32 bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the request again all the leading zeros will be flipped to ones to extend the sign and won't match the original ID anymore (this has been observed in practice). If we can't successfully remove the request from the hash table again after 'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify the adapter about new work because the adapter is already gone during e.g. a ChpID toggle) we will end up with a double free. We unconditionally free the request in the calling function when 'zfcp_fsf_req_send()' fails, but because the request is still in the hash table we end up with a stale memory reference, and once the zfcp adapter is either reset during recovery or shutdown we end up freeing the same memory twice. The resulting stack traces vary depending on the kernel and have no direct correlation to the place where the bug occurs. Here are three examples that have been seen in practice: list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:62! monitor event: 0040 ilc:2 [#1] PREEMPT SMP Modules linked in: ... CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded Hardware name: ... Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6 0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8 00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800 00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70 Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336 00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8 #00000003cbeea1f4: af000000 mc 0,0 >00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78 00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48 00000003cbeea204: b9040043 lgr %r4,%r3 00000003cbeea208: b9040051 lgr %r5,%r1 00000003cbeea20c: b9040032 lgr %r3,%r2 Call Trace: [<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140 ([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140) [<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp] [<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp] [<000003ff7ff4a22e>] zfcp_erp_strategy+0x21e/0xca0 [zfcp] [<000003ff7ff4ad34>] zfcp_erp_thread+0x84/0x1a0 [zfcp] [<00000003cb5eece8>] kthread+0x138/0x150 [<00000003cb557f3c>] __ret_from_fork+0x3c/0x60 [<00000003cc4172ea>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000003cc3e9d04>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 Fault in home space mode while using kernel ASCE. AS:0000000063b10007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 10 PID: 0 Comm: swapper/10 Kdump: loaded Hardware name: ... Krnl PSW : 0404d00180000000 000003ff7febaf8e (zfcp_fsf_reqid_check+0x86/0x158 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 5a6f1cfa89c49ac3 00000000aff2c4c8 6b6b6b6b6b6b6b6b 00000000000002a8 0000000000000000 0000000000000055 0000000000000000 00000000a8515800 0700000000000000 00000000a6e14500 00000000aff2c000 000000008003c44c 000000008093c700 0000000000000010 00000380009ebba8 00000380009ebb48 Krnl Code: 000003ff7febaf7e: a7f4003d brc 15,000003ff7febaff8 000003ff7febaf82: e32020000004 lg %r2,0(%r2) #000003ff7febaf88: ec2100388064 cgrj %r2,%r1,8,000003ff7febaff8 >000003ff7febaf8e: e3b020100020 cg %r11,16(%r2) 000003ff7febaf94: a774fff7 brc 7,000003ff7febaf82 000003ff7febaf98: ec280030007c cgij %r2,0,8,000003ff7febaff8 000003ff7febaf9e: e31020080004 lg %r1,8(%r2) 000003ff7febafa4: e33020000004 lg %r3,0(%r2) Call Trace: [<000003ff7febaf8e>] zfcp_fsf_reqid_check+0x86/0x158 [zfcp] [<000003ff7febbdbc>] zfcp_qdio_int_resp+0x6c/0x170 [zfcp] [<000003ff7febbf90>] zfcp_qdio_irq_tasklet+0xd0/0x108 [zfcp] [<0000000061d90a04>] tasklet_action_common.constprop.0+0xdc/0x128 [<000000006292f300>] __do_softirq+0x130/0x3c0 [<0000000061d906c6>] irq_exit_rcu+0xfe/0x118 [<000000006291e818>] do_io_irq+0xc8/0x168 [<000000006292d516>] io_int_handler+0xd6/0x110 [<000000006292d596>] psw_idle_exit+0x0/0xa ([<0000000061d3be50>] arch_cpu_idle+0x40/0xd0) [<000000006292ceea>] default_idle_call+0x52/0xf8 [<0000000061de4fa4>] do_idle+0xd4/0x168 [<0000000061de51fe>] cpu_startup_entry+0x36/0x40 [<0000000061d4faac>] smp_start_secondary+0x12c/0x138 [<000000006292d88e>] restart_int_handler+0x6e/0x90 Last Breaking-Event-Address: [<000003ff7febaf94>] zfcp_fsf_reqid_check+0x8c/0x158 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 523b05d3ae76a000 TEID: 523b05d3ae76a803 Fault in home space mode while using kernel ASCE. AS:0000000077c40007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 3 PID: 453 Comm: kworker/3:1H Kdump: loaded Hardware name: ... Workqueue: kblockd blk_mq_run_work_fn Krnl PSW : 0404d00180000000 0000000076fc0312 (__kmalloc+0xd2/0x398) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: ffffffffffffffff 523b05d3ae76abf6 0000000000000000 0000000000092a20 0000000000000002 00000007e49b5cc0 00000007eda8f000 0000000000092a20 00000007eda8f000 00000003b02856b9 00000000000000a8 523b05d3ae76abf6 00000007dd662000 00000007eda8f000 0000000076fc02b2 000003e0037637a0 Krnl Code: 0000000076fc0302: c004000000d4 brcl 0,76fc04aa 0000000076fc0308: b904001b lgr %r1,%r11 #0000000076fc030c: e3106020001a algf %r1,32(%r6) >0000000076fc0312: e31010000082 xg %r1,0(%r1) 0000000076fc0318: b9040001 lgr %r0,%r1 0000000076fc031c: e30061700082 xg %r0,368(%r6) 0000000076fc0322: ec59000100d9 aghik %r5,%r9,1 0000000076fc0328: e34003b80004 lg %r4,952 Call Trace: [<0000000076fc0312>] __kmalloc+0xd2/0x398 [<0000000076f318f2>] mempool_alloc+0x72/0x1f8 [<000003ff8027c5f8>] zfcp_fsf_req_create.isra.7+0x40/0x268 [zfcp] [<000003ff8027f1bc>] zfcp_fsf_fcp_cmnd+0xac/0x3f0 [zfcp] [<000003ff80280f1a>] zfcp_scsi_queuecommand+0x122/0x1d0 [zfcp] [<000003ff800b4218>] scsi_queue_rq+0x778/0xa10 [scsi_mod] [<00000000771782a0>] __blk_mq_try_issue_directly+0x130/0x208 [<000000007717a124>] blk_mq_request_issue_directly+0x4c/0xa8 [<000003ff801302e2>] dm_mq_queue_rq+0x2ea/0x468 [dm_mod] [<0000000077178c12>] blk_mq_dispatch_rq_list+0x33a/0x818 [<000000007717f064>] __blk_mq_do_dispatch_sched+0x284/0x2f0 [<000000007717f44c>] __blk_mq_sched_dispatch_requests+0x1c4/0x218 [<000000007717fa7a>] blk_mq_sched_dispatch_requests+0x52/0x90 [<0000000077176d74>] __blk_mq_run_hw_queue+0x9c/0xc0 [<0000000076da6d74>] process_one_work+0x274/0x4d0 [<0000000076da7018>] worker_thread+0x48/0x560 [<0000000076daef18>] kthread+0x140/0x160 [<000000007751d144>] ret_from_fork+0x28/0x30 Last Breaking-Event-Address: [<0000000076fc0474>] __kmalloc+0x234/0x398 Kernel panic - not syncing: Fatal exception: panic_on_oops To fix this, simply change the type of the cache variable to 'unsigned long', like the rest of zfcp and also the argument for 'zfcp_reqlist_find_rm()'. This prevents truncation and wrong sign extension and so can successfully remove the request from the hash table. Fixes: e60a6d69f1f8 ("[SCSI] zfcp: Remove function zfcp_reqlist_find_safe") Cc: <stable@vger.kernel.org> #v2.6.34+ Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Link: https://lore.kernel.org/r/979f6e6019d15f91ba56182f1aaf68d61bf37fc6.1668595505.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-16s390/dcssblk: fix deadlock when adding a DCSSGerald Schaefer1-0/+1
After the rework from commit 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT"), when calling device_add_disk(), dcssblk will end up in disk_scan_partitions(), and not break out early w/o GENHD_FL_NO_PART. This will trigger implicit open/release via blkdev_get/put_whole() later. dcssblk_release() will then deadlock on dcssblk_devices_sem semaphore, which is already held from dcssblk_add_store() when calling device_add_disk(). dcssblk does not support partitions (DCSSBLK_MINORS_PER_DISK == 1), and never scanned partitions before. Therefore restore the previous behavior, and explicitly disallow partition scanning by setting the GENHD_FL_NO_PART flag. This will also prevent this deadlock scenario. Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT") Cc: <stable@vger.kernel.org> # 5.17+ Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-11-03s390/zcrypt: fix warning about field-spanning writeHarald Freudenberger1-6/+15
This patch fixes the warning memcpy: detected field-spanning write (size 60) of single field "to" at drivers/s390/crypto/zcrypt_api.h:173 (size 2) WARNING: CPU: 1 PID: 2114 at drivers/s390/crypto/zcrypt_api.h:173 prep_ep11_ap_msg+0x2c6/0x2e0 [zcrypt] The code has been rewritten to use a union in combination with a flex array to clearly state which part of the buffer the payload is to be copied in via z_copy_from_user function (which may call memcpy() in case of in-kernel calls). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Suggested-by: Jürgen Christ <jchrist@linux.ibm.com> Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-10-26s390/vfio-ap: Fix memory allocation for mdev_types arrayJason J. Herne1-1/+1
The vfio-ap crypto driver fails to allocate memory for an array of pointers used to pass supported mdev types to mdev_register_parent(). Since we only support a single mdev type, the fix is to allocate a single entry in the ap_matrix_dev->mdev_types array. Link: https://lore.kernel.org/r/20221021145905.15100-1-jjherne@linux.ibm.com Fixes: da44c340c4fe ("vfio/mdev: simplify mdev_type handling") Cc: stable@vger.kernel.org Cc: Tony Krowiak <akrowiak@linux.ibm.com> Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-10-26s390/cio: fix out-of-bounds access on cio_ignore freePeter Oberparleiter1-6/+2
The channel-subsystem-driver scans for newly available devices whenever device-IDs are removed from the cio_ignore list using a command such as: echo free >/proc/cio_ignore Since an I/O device scan might interfer with running I/Os, commit 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") introduced an optimization to exclude online devices from the scan. The newly added check for online devices incorrectly assumes that an I/O-subchannel's drvdata points to a struct io_subchannel_private. For devices that are bound to a non-default I/O subchannel driver, such as the vfio_ccw driver, this results in an out-of-bounds read access during each scan. Fix this by changing the scan logic to rely on a driver-independent online indication. For this we can use struct subchannel->config.ena, which is the driver's requested subchannel-enabled state. Since I/Os can only be started on enabled subchannels, this matches the intent of the original optimization of not scanning devices where I/O might be running. Fixes: 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") Fixes: 0c3812c347bf ("s390/cio: derive cdev information only for IO-subchannels") Cc: <stable@vger.kernel.org> # v5.15 Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-10-14Merge tag 's390-6.1-2' of ↵Linus Torvalds2-3/+36
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Generate a change uevent on unsolicited device end I/O interrupt for z/VM unit record devices supported by the vmur driver. This event can be used to automatically trigger processing of files as they arrive in the z/VM reader. * tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vmur: generate uevent on unsolicited device end s390/vmur: remove unnecessary BUG statement
2022-10-13Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds5-133/+97
Pull VFIO updates from Alex Williamson: - Prune private items from vfio_pci_core.h to a new internal header, fix missed function rename, and refactor vfio-pci interrupt defines (Jason Gunthorpe) - Create consistent naming and handling of ioctls with a function per ioctl for vfio-pci and vfio group handling, use proper type args where available (Jason Gunthorpe) - Implement a set of low power device feature ioctls allowing userspace to make use of power states such as D3cold where supported (Abhishek Sahu) - Remove device counter on vfio groups, which had restricted the page pinning interface to singleton groups to account for limitations in the type1 IOMMU backend. Document usage as limited to emulated IOMMU devices, ie. traditional mdev devices where this restriction is consistent (Jason Gunthorpe) - Correct function prefix in hisi_acc driver incurred during previous refactoring (Shameer Kolothum) - Correct typo and remove redundant warning triggers in vfio-fsl driver (Christophe JAILLET) - Introduce device level DMA dirty tracking uAPI and implementation in the mlx5 variant driver (Yishai Hadas & Joao Martins) - Move much of the vfio_device life cycle management into vfio core, simplifying and avoiding duplication across drivers. This also facilitates adding a struct device to vfio_device which begins the introduction of device rather than group level user support and fills a gap allowing userspace identify devices as vfio capable without implicit knowledge of the driver (Kevin Tian & Yi Liu) - Split vfio container handling to a separate file, creating a more well defined API between the core and container code, masking IOMMU backend implementation from the core, allowing for an easier future transition to an iommufd based implementation of the same (Jason Gunthorpe) - Attempt to resolve race accessing the iommu_group for a device between vfio releasing DMA ownership and removal of the device from the IOMMU driver. Follow-up with support to allow vfio_group to exist with NULL iommu_group pointer to support existing userspace use cases of holding the group file open (Jason Gunthorpe) - Fix error code and hi/lo register manipulation issues in the hisi_acc variant driver, along with various code cleanups (Longfang Liu) - Fix a prior regression in GVT-g group teardown, resulting in unreleased resources (Jason Gunthorpe) - A significant cleanup and simplification of the mdev interface, consolidating much of the open coded per driver sysfs interface support into the mdev core (Christoph Hellwig) - Simplification of tracking and locking around vfio_groups that fall out from previous refactoring (Jason Gunthorpe) - Replace trivial open coded f_ops tests with new helper (Alex Williamson) * tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits) vfio: More vfio_file_is_group() use cases vfio: Make the group FD disassociate from the iommu_group vfio: Hold a reference to the iommu_group in kvm for SPAPR vfio: Add vfio_file_is_group() vfio: Change vfio_group->group_rwsem to a mutex vfio: Remove the vfio_group->users and users_comp vfio/mdev: add mdev available instance checking to the core vfio/mdev: consolidate all the description sysfs into the core code vfio/mdev: consolidate all the available_instance sysfs into the core code vfio/mdev: consolidate all the name sysfs into the core code vfio/mdev: consolidate all the device_api sysfs into the core code vfio/mdev: remove mtype_get_parent_dev vfio/mdev: remove mdev_parent_dev vfio/mdev: unexport mdev_bus_type vfio/mdev: remove mdev_from_dev vfio/mdev: simplify mdev_type handling vfio/mdev: embedd struct mdev_parent in the parent data structure vfio/mdev: make mdev.h standalone includable drm/i915/gvt: simplify vgpu configuration management drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types ...
2022-10-10s390/vmur: generate uevent on unsolicited device endPeter Oberparleiter2-1/+34
When a traditional channel-attached device transitions from not-ready to ready state, an unsolicited DEVICE END I/O interrupt is raised. This happens for example when a new file arrives in the z/VM virtual reader device. Change the Linux kernel to generate a change uevent when such an interrupt occurs for any online unit record devices supported by the vmur driver. This can be useful to automatically trigger processing of files as they arrive in the reader device. A sample udev rule for running a program when this event occurs looks as follows: ENV{DRIVER}=="vmur", ACTION=="change", ENV{EVENT}=="unsol_de", \ RUN{program}="/path/to/program" The rule can be tested using the following steps: 1. Set reader device online (assuming default reader device number 000c) $ chzdev -ea 0.0.000c 2. Force a ready-state transition using z/VM's READY CP command $ vmcp ready 000c Suggested-by: Alan Altmark <Alan_Altmark@us.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-10-10s390/vmur: remove unnecessary BUG statementPeter Oberparleiter1-2/+2
An existing BUG statement in vmur's interrupt handler triggers if: 1. An online vmur device is removed (e.g. due to driver unload, manual unbind or channel-report words indicating hypervisor-side device removal) 2. Device deactivation fails due to firmware/hypervisor error, leaving subchannel enabled for interrupts + drvdata=NULL 3. Interrupt occurs This situation is highly unlikely and not a clear indication of a general system error that would warrant stopping the full Linux system. Also it can be prevented completely by clearing the interrupt handler when unsetting a vmur device's drvdata. Replace the BUG statement in vmur's interrupt handler by clearing the interrupt handler callback during device removal. Also move the initial setting of the interrupt handler callback under lock for consistency reasons. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-10-09Merge tag 's390-6.1-1' of ↵Linus Torvalds12-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Make use of the IBM z16 processor activity instrumentation facility extension to count neural network processor assist operations: add a new PMU device driver so that perf can make use of this. - Rework memcpy_real() to avoid DAT-off mode. - Rework absolute lowcore access code. - Various small fixes and improvements all over the code. * tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: remove unused bus_next field from struct zpci_dev s390/cio: remove unused ccw_device_force_console() declaration s390/pai: Add support for PAI Extension 1 NNPA counters s390/mm: fix no previous prototype warnings in maccess.c s390/mm: uninline copy_oldmem_kernel() function s390/mm,ptdump: add real memory copy page markers s390/mm: rework memcpy_real() to avoid DAT-off mode s390/dump: save IPL CPU registers once DAT is available s390/pci: convert high_memory to physical address s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/smp: call smp_reinit_ipl_cpu() before scheduler is available s390/ptdump: add missing amode31 markers s390/mm: split lowcore pages with set_memory_4k() s390/mm: remove unused access parameter from do_fault_error() s390/delay: sync comment within __delay() with reality s390: move from strlcpy with unused retval to strscpy
2022-10-08Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-07Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linuxLinus Torvalds10-120/+1044
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...
2022-10-04vfio/mdev: add mdev available instance checking to the coreJason Gunthorpe5-31/+2
Many of the mdev drivers use a simple counter for keeping track of the available instances. Move this code to the core code and store the counter in the mdev_parent. Implement it using correct locking, fixing mdpy. Drivers just provide the value in the mdev_driver at registration time and the core code takes care of maintaining it and exposing the value in sysfs. [hch: count instances per-parent instead of per-type, use an atomic_t to avoid taking mdev_list_lock in the show method] Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Link: https://lore.kernel.org/r/20220923092652.100656-15-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04vfio/mdev: consolidate all the available_instance sysfs into the core codeChristoph Hellwig2-24/+6
Every driver just print a number, simply add a method to the mdev_driver to return it and provide a standard sysfs show function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Link: https://lore.kernel.org/r/20220923092652.100656-13-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04vfio/mdev: consolidate all the name sysfs into the core codeChristoph Hellwig3-17/+2
Every driver just emits a static string, simply add a field to the mdev_type for the driver to fill out or fall back to the sysfs name and provide a standard sysfs show function. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Link: https://lore.kernel.org/r/20220923092652.100656-12-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04vfio/mdev: consolidate all the device_api sysfs into the core codeJason Gunthorpe2-17/+2
Every driver just emits a static string, simply feed it through the ops and provide a standard sysfs show function. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Link: https://lore.kernel.org/r/20220923092652.100656-11-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04vfio/mdev: remove mtype_get_parent_devChristoph Hellwig1-2/+1
Just open code the dereferences in the only user. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Link: https://lore.kernel.org/r/20220923092652.100656-10-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04vfio/mdev: simplify mdev_type handlingChristoph Hellwig5-27/+16
Instead of abusing struct attribute_group to control initialization of struct mdev_type, just define the actual attributes in the mdev_driver, allocate the mdev_type structures in the caller and pass them to mdev_register_parent. This allows the caller to use container_of to get at the containing structure and thus significantly simplify the code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Link: https://lore.kernel.org/r/20220923092652.100656-6-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04vfio/mdev: embedd struct mdev_parent in the parent data structureChristoph Hellwig5-5/+11
Simplify mdev_{un}register_device by requiring the caller to pass in a structure allocate as part of the parent device structure. This removes the need for a list of parents and the separate mdev_parent refcount as we can simplify rely on the reference to the parent device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Link: https://lore.kernel.org/r/20220923092652.100656-5-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-10-04vfio/mdev: make mdev.h standalone includableChristoph Hellwig2-2/+0
Include <linux/device.h> and <linux/uuid.h> so that users of this headers don't need to do that and remove those includes that aren't needed any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Link: https://lore.kernel.org/r/20220923092652.100656-4-hch@lst.de Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+37
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29net: drop the weight argument from netif_napi_addJakub Kicinski2-2/+2
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28s390/dasd: use blk_mq_alloc_diskChristoph Hellwig7-88/+39
As far as I can tell there is no need for the staged setup in dasd, so allocate the tagset and the disk with the queue in dasd_gendisk_alloc. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220928143945.1687114-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-28s390/qeth: Split memcpy() of struct qeth_ipacmd_addr_change flexible arrayKees Cook1-2/+2
To work around a misbehavior of the compiler's ability to see into composite flexible array structs (as detailed in the coming memcpy() hardening series[1]), split the memcpy() of the header and the payload so no false positive run-time overflow warning will be generated. [1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/ Cc: Wenjia Zhang <wenjia@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220927003953.1942442-1-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-25Merge 7e2cd21e02b3 ("Merge tag 'tty-6.0-rc7' of ↵Greg Kroah-Hartman1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next We need the tty fixes and api additions in this branch. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-25Merge tag 's390-6.0-5' of ↵Linus Torvalds1-0/+30
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Vasily Gorbik: - Fix potential hangs in VFIO AP driver * tag 's390-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vfio-ap: bypass unnecessary processing of AP resources
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 13:29:13 +0300