summaryrefslogtreecommitdiff
path: root/drivers/s390/block/dcssblk.c
AgeCommit message (Collapse)AuthorFilesLines
2023-08-30s390/dcssblk: fix lockdep warningGerald Schaefer1-7/+6
dcssblk_remove_store() holds the dcssblk_devices_sem semaphore while calling del_gendisk(dev_info->gd), which in turn tries to acquire disk->open_mutex. Then there is dcssblk_release(), which is called with disk->open_mutex held, and tries to acquire dcssblk_devices_sem. Lockdep reports this as possible circular locking dependency (CPU0 = dcssblk_remove_store, CPU1 = dcssblk_release): [ 44.948865] Possible unsafe locking scenario: [ 44.948866] CPU0 CPU1 [ 44.948867] ---- ---- [ 44.948868] lock(&dcssblk_devices_sem); [ 44.948870] lock(&disk->open_mutex); [ 44.948872] lock(&dcssblk_devices_sem); [ 44.948874] lock(&disk->open_mutex); [ 44.948876] *** DEADLOCK *** In practice, this deadlock should not happen, since dcssblk_remove_store() checks for dev_info->use_count != 0 after acquiring dcssblk_devices_sem, and breaks out before calling del_gendisk(). dev_info->use_count will be decremented in dcssblk_release(), protected by dcssblk_devices_sem. Still there is no need for dcssblk_remove_store() to hold the dcssblk_devices_sem until after calling del_gendisk(), as this only protects dcssblk internal data. So fix the lockdep warning by releasing dcssblk_devices_sem earlier. Also move the segment_unload() loop up, similar to dcssblk_shared_store() error path, no need to do that after calling del_gendisk(). Also change dcssblk_shared_store() error path, where dcssblk_devices_sem was also released only after calling del_gendisk(), and a similar lockdep warning could be triggered (but also deadlock prevented by check for dev_info->use_count). Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-16s390/dcssblk: fix kernel crash with list_add corruptionGerald Schaefer1-1/+3
Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. Fixes: fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") Cc: <stable@vger.kernel.org> # 5.17+ Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/dcssblk: fix virtual vs physical address confusionAlexander Gordeev1-10/+7
Fix virtual vs physical address confusion (which currently are the same). Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/dcssblk: use IS_ALIGNED() for alignment checksAlexander Gordeev1-3/+4
Use IS_ALIGNED() instead of cumbersome bit manipulations. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-06Merge tag 's390-6.5-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - Fix virtual vs physical address confusion in vmem_add_range() and vmem_remove_range() functions - Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h> throughout s390 code - Make all PSW related defines also available for assembler files. Remove PSW_DEFAULT_KEY define from uapi for that - When adding an undefined symbol the build still succeeds, but userspace crashes trying to execute VDSO, because the symbol is not resolved. Add undefined symbols check to prevent that - Use kvmalloc_array() instead of kzalloc() for allocaton of 256k memory when executing s390 crypto adapter IOCTL - Add -fPIE flag to prevent decompressor misaligned symbol build error with clang - Use .balign instead of .align everywhere. This is a no-op for s390, but with this there no mix in using .align and .balign anymore - Filter out -mno-pic-data-is-text-relative flag when compiling kernel to prevent VDSO build error - Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS mask directly - Do not retry administrative requests to some s390 crypto cards, since the firmware assumes replay attacks - Remove most of the debug code, which is build in when kernel config option CONFIG_ZCRYPT_DEBUG is enabled - Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch off the multiple devices support for the s390 zcrypt device driver - With the conversion to generic entry machine checks are accounted to the current context instead of irq time. As result, the STCKF instruction at the beginning of the machine check handler and the lowcore member are no longer required, therefore remove it - Fix various typos found with codespell - Minor cleanups to CPU-measurement Counter and Sampling Facilities code - Revert patch that removes VMEM_MAX_PHYS macro, since it causes a regression * tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits) Revert "s390/mm: get rid of VMEM_MAX_PHYS macro" s390/cpum_sf: remove check on CPU being online s390/cpum_sf: handle casts consistently s390/cpum_sf: remove unnecessary debug statement s390/cpum_sf: remove parameter in call to pr_err s390/cpum_sf: simplify function setup_pmu_cpu s390/cpum_cf: remove unneeded debug statements s390/entry: remove mcck clock s390: fix various typos s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option s390/zcrypt: do not retry administrative requests s390/zcrypt: cleanup some debug code s390/entry: rework entering DAT-on mode on CPU restart s390/mm: fence off VM macros from asm and linker s390: include linux/io.h instead of asm/io.h s390/ptrace: make all psw related defines also available for asm s390/ptrace: remove PSW_DEFAULT_KEY from uapi s390/vdso: filter out mno-pic-data-is-text-relative cflag s390: consistently use .balign instead of .align s390/decompressor: fix misaligned symbol build error ...
2023-07-03s390: include linux/io.h instead of asm/io.hHeiko Carstens1-1/+1
Include linux/io.h instead of asm/io.h everywhere. linux/io.h includes asm/io.h, so this shouldn't cause any problems. Instead this might help for some randconfig build errors which were reported due to some undefined io related functions. Also move the changed include so it stays grouped together with other includes from the same directory. For ctcm_mpc.c also remove not needed comments (actually questions). Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-07-01Merge tag 'libnvdimm-for-6.5' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm and DAX updates from Vishal Verma: "This is mostly small cleanups and fixes, with the biggest change being the change to the DAX fault handler allowing it to return VM_FAULT_HWPOISON. Summary: - DAX fixes and cleanups including a use after free, extra references, and device unregistration, and a redundant variable. - Allow the DAX fault handler to return VM_FAULT_HWPOISON - A few libnvdimm cleanups such as making some functions and variables static where sufficient. - Add a few missing prototypes for wrapped functions in tools/testing/nvdimm" * tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: enable dax fault handler to report VM_FAULT_HWPOISON nvdimm: make security_show static nvdimm: make nd_class variable static dax/kmem: Pass valid argument to memory_group_register_static fsdax: remove redundant variable 'error' dax: Cleanup extra dax_region references dax: Introduce alloc_dev_dax_id() dax: Use device_unregister() in unregister_dax_mapping() dax: Fix dax_mapping_release() use after free tools/testing/nvdimm: Drop empty platform remove function libnvdimm: mark 'security_show' static again testing: nvdimm: add missing prototypes for wrapped functions dax: fix missing-prototype warnings
2023-06-26dax: enable dax fault handler to report VM_FAULT_HWPOISONJane Chu1-1/+2
When multiple processes mmap() a dax file, then at some point, a process issues a 'load' and consumes a hwpoison, the process receives a SIGBUS with si_code = BUS_MCEERR_AR and with si_lsb set for the poison scope. Soon after, any other process issues a 'load' to the poisoned page (that is unmapped from the kernel side by memory_failure), it receives a SIGBUS with si_code = BUS_ADRERR and without valid si_lsb. This is confusing to user, and is different from page fault due to poison in RAM memory, also some helpful information is lost. Channel dax backend driver's poison detection to the filesystem such that instead of reporting VM_FAULT_SIGBUS, it could report VM_FAULT_HWPOISON. If user level block IO syscalls fail due to poison, the errno will be converted to EIO to maintain block API consistency. Signed-off-by: Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/20230615181325.1327259-2-jane.chu@oracle.com Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2023-06-12block: replace fmode_t with a block-specific type for block open flagsChristoph Hellwig1-2/+2
The only overlap between the block open flags mapped into the fmode_t and other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and ->ioctl and stop abusing fmode_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: remove the unused mode argument to ->releaseChristoph Hellwig1-2/+2
The mode argument to the ->release block_device_operation is never used, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-12block: pass a gendisk to ->openChristoph Hellwig1-4/+3
->open is only called on the whole device. Make that explicit by passing a gendisk instead of the block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-30s390/dcssblk:: don't call bio_split_to_limitsChristoph Hellwig1-4/+0
s390 iterates over the bio using bio_for_each_segment and doesn't need any bio splitting. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/20230123075356.60847-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-04block: handle bio_split_to_limits() NULL returnJens Axboe1-0/+2
This can't happen right now, but in preparation for allowing bio_split_to_limits() returning NULL if it ended the bio, check for it in all the callers. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-16s390/dcssblk: fix deadlock when adding a DCSSGerald Schaefer1-0/+1
After the rework from commit 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT"), when calling device_add_disk(), dcssblk will end up in disk_scan_partitions(), and not break out early w/o GENHD_FL_NO_PART. This will trigger implicit open/release via blkdev_get/put_whole() later. dcssblk_release() will then deadlock on dcssblk_devices_sem semaphore, which is already held from dcssblk_add_store() when calling device_add_disk(). dcssblk does not support partitions (DCSSBLK_MINORS_PER_DISK == 1), and never scanned partitions before. Therefore restore the previous behavior, and explicitly disallow partition scanning by setting the GENHD_FL_NO_PART flag. This will also prevent this deadlock scenario. Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT") Cc: <stable@vger.kernel.org> # 5.17+ Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-08-30s390: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Benjamin Block <bblock@linux.ibm.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220818205948.6360-1-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20220818210102.7301-1-wsa+renesas@sang-engineering.com [gor@linux.ibm.com: squashed two changes linked above together] Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-08-03block: change the blk_queue_split calling conventionChristoph Hellwig1-1/+1
The double indirect bio leads to somewhat suboptimal code generation. Instead return the (original or split) bio, and make sure the request_queue arguments to the lower level helpers is passed after the bio to avoid constant reshuffling of the argument passing registers. Also give it and the helpers used to implement it more descriptive names. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: remove blk_cleanup_diskChristoph Hellwig1-4/+4
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-16dax: introduce DAX_RECOVERY_WRITE dax access modeJane Chu1-3/+6
Up till now, dax_direct_access() is used implicitly for normal access, but for the purpose of recovery write, dax range with poison is requested. To make the interface clear, introduce enum dax_access_mode { DAX_ACCESS, DAX_RECOVERY_WRITE, } where DAX_ACCESS is used for normal dax access, and DAX_RECOVERY_WRITE is used for dax recovery write. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-18dax: remove the copy_from_iter and copy_to_iter methodsChristoph Hellwig1-14/+0
These methods indirect the actual DAX read/write path. In the end pmem uses magic flush and mc safe variants and fuse and dcssblk use plain ones while device mapper picks redirects to the underlying device. Add set_dax_nocache() and set_dax_nomc() APIs to control which copy routines are used to remove indirect call from the read/write fast path as well as a lot of boilerplate code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> [virtiofs] Link: https://lore.kernel.org/r/20211215084508.435401-5-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-18dax: remove the DAXDEV_F_SYNC flagChristoph Hellwig1-2/+2
Remove the DAXDEV_F_SYNC flag and thus the flags argument to alloc_dax and just let the drivers call set_dax_synchronous directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20211215084508.435401-4-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-04dax: remove dax_capableChristoph Hellwig1-1/+0
Just open code the block size and dax_dev == NULL checks in the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> [erofs] Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20211129102203.2243509-9-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-12-04dax: simplify the dax_device <-> gendisk associationChristoph Hellwig1-3/+8
Replace the dax_host_hash with an xarray indexed by the pointer value of the gendisk, and require explicitly calls from the block drivers that want to associate their gendisk with a dax_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20211129102203.2243509-5-hch@lst.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-11-07Merge tag 's390-5.16-1' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for ftrace with direct call and ftrace direct call samples. - Add support for kernel command lines longer than current 896 bytes and make its length configurable. - Add support for BEAR enhancement facility to improve last breaking event instruction tracking. - Add kprobes sanity checks and testcases to prevent kprobe in the mid of an instruction. - Allow concurrent access to /dev/hwc for the CPUMF users. - Various ftrace / jump label improvements. - Convert unwinder tests to KUnit. - Add s390_iommu_aperture kernel parameter to tweak the limits on concurrently usable DMA mappings. - Add ap.useirq AP module option which can be used to disable interrupt use. - Add add_disk() error handling support to block device drivers. - Drop arch specific and use generic implementation of strlcpy and strrchr. - Several __pa/__va usages fixes. - Various cio, crypto, pci, kernel doc and other small fixes and improvements all over the code. [ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ] * tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits) s390: make command line configurable s390: support command lines longer than 896 bytes s390/kexec_file: move kernel image size check s390/pci: add s390_iommu_aperture kernel parameter s390/spinlock: remove incorrect kernel doc indicator s390/string: use generic strlcpy s390/string: use generic strrchr s390/ap: function rework based on compiler warning s390/cio: make ccw_device_dma_* more robust s390/vfio-ap: s390/crypto: fix all kernel-doc warnings s390/hmcdrv: fix kernel doc comments s390/ap: new module option ap.useirq s390/cpumf: Allow multiple processes to access /dev/hwc s390/bitops: return true/false (not 1/0) from bool functions s390: add support for BEAR enhancement facility s390: introduce nospec_uses_trampoline() s390: rename last_break to pgm_last_break s390/ptrace: add last_break member to pt_regs s390/sclp: sort out physical vs virtual pointers usage s390/setup: convert start and end initrd pointers to virtual ...
2021-10-18block: switch polling to be bio basedChristoph Hellwig1-4/+3
Replace the blk_poll interface that requires the caller to keep a queue and cookie from the submissions with polling based on the bio. Polling for the bio itself leads to a few advantages: - the cookie construction can made entirely private in blk-mq.c - the caller does not need to remember the request_queue and cookie separately and thus sidesteps their lifetime issues - keeping the device and the cookie inside the bio allows to trivially support polling BIOs remapping by stacking drivers - a lot of code to propagate the cookie back up the submission path can be removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-04s390/block/dcssblk: add error handling support for add_disk()Gerald Schaefer1-1/+7
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Link: https://lore.kernel.org/r/20210927220232.1071926-6-mcgrof@kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-08-16dcssblk: use bvec_virtChristoph Hellwig1-2/+1
Use bvec_virt instead of open coding it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210804095634.460779-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-04Merge tag 's390-5.14-1' of ↵Linus Torvalds1-103/+3
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Rework inline asm to get rid of error prone "register asm" constructs, which are problematic especially when code instrumentation is enabled. In particular introduce and use register pair union to allocate even/odd register pairs. Unfortunately this breaks compatibility with older clang compilers and minimum clang version for s390 has been raised to 13. https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/ - Fix gcc 11 warnings, which triggered various minor reworks all over the code. - Add zstd kernel image compression support. - Rework boot CPU lowcore handling. - De-duplicate and move kernel memory layout setup logic earlier. - Few fixes in preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for mem functions. - Remove broken and unused power management support leftovers in s390 drivers. - Disable stack-protector for decompressor and purgatory to fix buildroot build. - Fix vt220 sclp console name to match the char device name. - Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in zPCI code. - Remove some implausible WARN_ON_ONCEs and remove arch specific counter transaction call backs in favour of default transaction handling in perf code. - Extend/add new uevents for online/config/mode state changes of AP card / queue device in zcrypt. - Minor entry and ccwgroup code improvements. - Other small various fixes and improvements all over the code. * tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (91 commits) s390/dasd: use register pair instead of register asm s390/qdio: get rid of register asm s390/ioasm: use symbolic names for asm operands s390/ioasm: get rid of register asm s390/cmf: get rid of register asm s390/lib,string: get rid of register asm s390/lib,uaccess: get rid of register asm s390/string: get rid of register asm s390/cmpxchg: use register pair instead of register asm s390/mm,pages-states: get rid of register asm s390/lib,xor: get rid of register asm s390/timex: get rid of register asm s390/hypfs: use register pair instead of register asm s390/zcrypt: Switch to flexible array member s390/speculation: Use statically initialized const for instructions virtio/s390: get rid of open-coded kvm hypercall s390/pci: add zpci_set_irq()/zpci_clear_irq() scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390 s390/ipl: use register pair instead of register asm s390/mem_detect: fix tprot() program check new psw handling ...
2021-06-18s390/dcssblk: Remove power management supportPeter Oberparleiter1-103/+3
Power management support was removed for s390 with commit 394216275c7d ("s390: remove broken hibernate / power management support"). Remove leftover dcssblk-related power management code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-01dcssblk: convert to blk_alloc_disk/blk_cleanup_diskChristoph Hellwig1-18/+8
Convert the dcssblk driver to use the blk_alloc_disk and blk_cleanup_disk helpers to simplify gendisk and request_queue allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210521055116.1053587-24-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25block: store a block_device pointer in struct bioChristoph Hellwig1-1/+1
Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25dcssblk: remove the end of device check in dcssblk_submit_bioChristoph Hellwig1-4/+0
The block layer already checks for this conditions in bio_check_eod before calling the driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01dcssblk: don't set bd_block_size in ->openChristoph Hellwig1-1/+0
bd_block_size contains a value that matches the logic block size when opening, so the statement is redundant. Even if it wasn't the dumb assignment would cause a a mismatch with bd_inode->i_blkbits. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: move ->make_request_fn to struct block_device_operationsChristoph Hellwig1-5/+4
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove the request_queue argument from blk_queue_splitChristoph Hellwig1-1/+1
The queue can be trivially derived from the bio, so pass one less argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-09Merge tag 'libnvdimm-for-5.7' of ↵Linus Torvalds1-2/+18
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ...
2020-04-03dax: Move mandatory ->zero_page_range() check in alloc_dax()Vivek Goyal1-2/+3
zero_page_range() dax operation is mandatory for dax devices. Right now that check happens in dax_zero_page_range() function. Dan thinks that's too late and its better to do the check earlier in alloc_dax(). I also modified alloc_dax() to return pointer with error code in it in case of failure. Right now it returns NULL and caller assumes failure happened due to -ENOMEM. But with this ->zero_page_range() check, I need to return -EINVAL instead. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Link: https://lore.kernel.org/r/20200401161125.GB9398@redhat.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-04-03s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driverVivek Goyal1-0/+15
Add dax operation zero_page_range for dcssblk driver. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> CC: linux-s390@vger.kernel.org Link: https://lore.kernel.org/r/20200228163456.1587-4-vgoyal@redhat.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-03-27block: simplify queue allocationChristoph Hellwig1-2/+2
Current make_request based drivers use either blk_alloc_queue_node or blk_alloc_queue to allocate a queue, and then set up the make_request_fn function pointer and a few parameters using the blk_queue_make_request helper. Simplify this by passing the make_request pointer to blk_alloc_queue, and while at it merge the _node variant into the main helper by always passing a node_id, and remove the superfluous gfp_mask parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-06libnvdimm: add dax_dev sync flagPankaj Gupta1-1/+1
This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-21dax: Arrange for dax_supported check to span multiple devicesDan Williams1-0/+1
Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-09-28block: genhd: add 'groups' argument to device_add_diskHannes Reinecke1-1/+1
Update device_add_disk() to take an 'groups' argument so that individual drivers can register a device with additional sysfs attributes. This avoids race condition the driver would otherwise have if these groups were to be created with sysfs_add_groups(). Signed-off-by: Martin Wilck <martin.wilck@suse.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-30s390, dcssblk: kaddr and pfn can be NULL to ->direct_access()Huaisheng Ye1-3/+5
dcssblk_direct_access() needs to check the validity of pointers kaddr and pfn for NULL assignment. If anyone equals to NULL, it doesn't need to calculate the value. If either of them is equal to NULL, that is to say callers may have no need for kaddr or pfn, so this patch is prepared for allowing them to pass in NULL instead of having to pass in a pointer or local variable that they then just throw away. Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Dave Jiang <dave.jianig@intel.com>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-3/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-23dax: Introduce a ->copy_to_iter dax operationDan Williams1-0/+7
Similar to the ->copy_from_iter() operation, a platform may want to deploy an architecture or device specific routine for handling reads from a dax_device like /dev/pmemX. On x86 this routine will point to a machine check safe version of copy_to_iter(). For now, add the plumbing to device-mapper and the dax core. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-09block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche1-1/+1
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-20mm, dax: introduce pfn_t_special()Dan Williams1-1/+2
In support of removing the VM_MIXEDMAP indication from DAX VMAs, introduce pfn_t_special() for drivers to indicate that _PAGE_SPECIAL should be used for DAX ptes. This also helps identify drivers like dccssblk that only want to use DAX in a read-only fashion without get_user_pages() support. Ideally we could delete axonram and dcssblk DAX support, but if we need to keep it better make it explicit that axonram and dcssblk only support a sub-set of DAX due to missing _PAGE_DEVMAP support. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-24s390: block: add SPDX identifiers to the remaining filesGreg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/s390/block/ files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Stefan Haberland <sth@linux.vnet.ibm.com> Cc: Jan Hoeppner <hoeppner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-2/+2
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-07Merge tag 'libnvdimm-for-4.13' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "libnvdimm updates for the latest ACPI and UEFI specifications. This pull request also includes new 'struct dax_operations' enabling to undo the abuse of copy_user_nocache() for copy operations to pmem. The dax work originally missed 4.12 to address concerns raised by Al. Summary: - Introduce the _flushcache() family of memory copy helpers and use them for persistent memory write operations on x86. The _flushcache() semantic indicates that the cache is either bypassed for the copy operation (movnt) or any lines dirtied by the copy operation are written back (clwb, clflushopt, or clflush). - Extend dax_operations with ->copy_from_iter() and ->flush() operations. These operations and other infrastructure updates allow all persistent memory specific dax functionality to be pushed into libnvdimm and the pmem driver directly. It also allows dax-specific sysfs attributes to be linked to a host device, for example: /sys/block/pmem0/dax/write_cache - Add support for the new NVDIMM platform/firmware mechanisms introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace label format, extensions to the address-range-scrub command set, new error injection commands, and a new BTT (block-translation-table) layout. These updates support inter-OS and pre-OS compatibility. - Fix a longstanding memory corruption bug in nfit_test. - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2) capable. - Miscellaneous fixes and small updates across libnvdimm and the nfit driver. Acknowledgements that came after the branch was pushed: commit 6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits) libnvdimm, namespace: record 'lbasize' for pmem namespaces acpi/nfit: Issue Start ARS to retrieve existing records libnvdimm: New ACPI 6.2 DSM functions acpi, nfit: Show bus_dsm_mask in sysfs libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru. acpi, nfit: Enable DSM pass thru for root functions. libnvdimm: passthru functions clear to send libnvdimm, btt: convert some info messages to warn/err libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime libnvdimm: fix the clear-error check in nsio_rw_bytes libnvdimm, btt: fix btt_rw_page not returning errors acpi, nfit: quiet invalid block-aperture-region warnings libnvdimm, btt: BTT updates for UEFI 2.7 format acpi, nfit: constify *_attribute_group libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region libnvdimm, pmem, dax: export a cache control attribute dax: convert to bitmask for flags dax: remove default copy_from_iter fallback libnvdimm, nfit: enable support for volatile ranges libnvdimm, pmem: fix persistence warning ...
2017-06-28dax: remove default copy_from_iter fallbackDan Williams1-0/+8
Require all dax-drivers to register a ->copy_from_iter() operation so that it is clear which dax_operations are optional and which must be implemented for filesystem-dax to operate. Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-21 16:03:16 +0300