summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-max77686.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-18rtc: max77686: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230304133028.2135435-16-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-03-07rtc: max77686: Add MAX77714 supportLuca Ceresoli1-0/+24
The RTC included in the MAX77714 PMIC is very similar to the one in the MAX77686. Reuse the rtc-max77686.c driver with the minimum required changes for the MAX77714 RTC. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-03-07rtc: max77686: Remove unused code to read in 12-hour modeLuca Ceresoli1-13/+1
The MAX77714 RTC chip is explicitly set to 24-hour mode in max77686_rtc_probe() -> max77686_rtc_init_reg() and never changed back to 12-hour mode. Accordingly info->rtc_24hr_mode is set to 1 in the same place and never modified later, so it is de facto a constant. Yet there is code to read 12-hour time, which is unreachable. Remove the unused variable, the unreachable code to manage 12-hour mode and the defines that become unused due to the above changes. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-03-07rtc: max77686: Rename day-of-month definesLuca Ceresoli1-8/+8
RTC_DATE and REG_RTC_DATE are used for the registers holding the day of month. Rename these constants to mean what they mean. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2022-03-07rtc: max77686: Convert comments to kernel-doc formatLuca Ceresoli1-9/+12
Convert the comments documenting this struct to kernel-doc format for standardization and readability. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-20rtc: max77686: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski1-2/+2
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
2020-08-08rtc: max77686: Fix wake-ups for max77620Jon Hunter1-4/+7
Following commit d8f090dbeafd ("rtc: max77686: Do not allow interrupt to fire before system resume"), RTC wake-ups stopped working on Jetson TX2 and Jetson Xavier platforms. The Jetson TX2 uses the max77620 PMIC and the Jetson Xavier uses max20024 PMIC. Both of these PMICs have the same max77620 RTC controller. For the max77620 RTC, the variable 'rtc_irq_from_platform' is defined as true in the max77686 driver and because of this the IRQ passed to the max77686 driver for RTC is the PMIC IRQ and not the parent. Hence, following commit d8f090dbeafd ("rtc: max77686: Do not allow interrupt to fire before system resume"), for the max77620 the RTC IRQ within the PMIC is now getting disabled on entry to suspend and unable to wake the system up. Fix this by only disabling interrupts on entry to suspend in the max77686 RTC driver, if the interrupt is the parent interrupt. Fixes: d8f090dbeafd ("rtc: max77686: Do not allow interrupt to fire before system resume") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200806125431.699339-1-jonathanh@nvidia.com
2020-07-16rtc: max77686: Do not allow interrupt to fire before system resumeKrzysztof Kozlowski1-2/+18
The rtc-max77686 device shares the main interrupt line with parent MFD device (max77686 driver). During the system suspend, the parent MFD device disables this IRQ to prevent an early event happening before resuming I2C bus controller. The same should be done by rtc-max77686 driver because otherwise the interrupt handler max77686_rtc_alarm_irq() will be called before its resume function (max77686_rtc_resume()). Such issue is not fatal but disabling shared IRQ by all users ensures correct behavior. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200615161455.4420-1-krzk@kernel.org
2020-05-11rtc: max77686: Use single-byte writes on MAX77620Thierry Reding1-6/+16
The MAX77620 doesn't support bulk writes, so make sure the regmap code breaks bulk writes into multiple single-byte writes. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200417170825.2551367-3-thierry.reding@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-09-01rtc: max77686: convert to devm_i2c_new_dummy_device()Wolfram Sang1-13/+4
I was about to simplify the call to i2c_unregister_device() when I realized that converting to devm_i2c_new_dummy_device() will simplify the driver a lot. So I took this approach. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20190830133124.21633-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-13rtc: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-4/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-rtc@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-40-swboyd@chromium.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-07-23rtc: max77686: convert to i2c_new_dummy_deviceWolfram Sang1-4/+4
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20190722172618.4061-3-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-14rtc: max77686: Fix the returned value in case of error in ↵Christophe JAILLET1-1/+1
'max77686_rtc_read_time()' In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Commit e115a2bf1426 has modified more than what is said in the commit message. Reverse part of it znd return an error when needed, as it was previously. Fixes: e115a2bf1426 ("rtc: max77686: stop validating rtc_time in .read_time") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-15rtc: maxim: Add SPDX license identifiersKrzysztof Kozlowski1-13/+7
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02rtc: max77686: stop validating rtc_time in .read_timeAlexandre Belloni1-3/+1
The RTC core is always calling rtc_valid_tm after the read_time callback. It is not necessary to call it just before returning from the callback. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2016-03-14rtc: max77686: Use REGMAP_IRQ_REG for regmap-rtc-irqs initialisationLaxman Dewangan1-6/+6
Use macro REGMAP_IRQ_REG from regmap.h to initialise the regmap irq table for max77686 to have better coding style and improve readability. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: Add support for MAX20024/MAX77620 RTC IPLaxman Dewangan1-3/+44
Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: move initialisation of rtc regmap, irq chip locallyLaxman Dewangan1-21/+127
To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: avoid reference of parent device info multiple placesLaxman Dewangan1-29/+23
Get rid of referring parent device info for register access all the places by making regmap as part of max77686 rtc device info. This will also remove the need of storing parent device info in max77686 rtc device info as this is no more required. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: use rtc regmap to access RTC registersLaxman Dewangan1-3/+4
rtc_regmap should be used to access all RTC registers instead of parent regmap regardless of what chip or property have it. This makes the register access uniform and extendible for other chips. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: fix checkpatch errorLaxman Dewangan1-12/+13
Fix following check patch error in rtc-max77686 driver: - Alignment should match open parenthesis. - braces {} should be used on all arms of this statement. - Prefer using the BIT macro Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Cleanup and reduce dmesg outputKrzysztof Kozlowski1-25/+14
Cleanup of entire driver of its dmesg output: 1. Remove printing of the function name, because printing device name is sufficient. This also makes the dev_err()-like functions more compact and readable (not need of line break). 2. Lower from info to debug printing of each RTC interrupt (no need to make noise on each alarm). 3. Remove dev_info() at beginning of probe because a message is already always printed by either probe failure or from registering the RTC device as /dev/rtcX. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Properly handle regmap_irq_get_virq() error codeKrzysztof Kozlowski1-1/+1
The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 6f1c1e71d933 ("mfd: max77686: Convert to use regmap_irq") Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Fix unsupported year messageJavier Martinez Canillas1-3/+1
The max77686 RTC only supports a range of 99 years so instead of using year 1900 as the base, the year 2000 is used. This means that 1900 to 1999 are unsupported years. The driver was printing a warning for those values but was returning a error so for consistency, print an error message instead and don't say that a year 2000 is assumed, since the year is not set. Also, it is better to use dev_* log functions instead of pr_* to print information about the device in the kernel log in a standardized way. This also allows to remove the local pr_fmt() defined macro. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Add max77802 supportJavier Martinez Canillas1-40/+156
The MAX77686 and MAX77802 RTC IP blocks are very similar with only these differences: 0) The RTC registers layout and addresses are different. 1) The MAX77686 use 1 bit of the sec/min/hour/etc registers as the alarm enable while MAX77802 has a separate register for that. 2) The MAX77686 RTCYEAR register valid values range is 0..99 while for MAX77802 is 0..199. 3) The MAX77686 has a separate I2C address for the RTC registers while the MAX77802 uses the same I2C address as the PMIC regs. 5) The minimum delay before a RTC update (16 msecs vs 200 usecs). There are separate drivers for MAX77686 and MAX77802 RTC IP blocks but the differences are not that big so the driver can be extended to support both instead of duplicating a lot of code in 2 drivers. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Add an indirection level to access RTC registersJavier Martinez Canillas1-10/+80
The max77686 driver is generic enough that can be used for other Maxim RTC IP blocks but these might not have the same registers layout so instead of accessing the registers directly, add a map to translate offsets to the real registers addresses for each IP. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Use a driver data struct instead hard-coded valuesJavier Martinez Canillas1-17/+34
The driver has some hard-coded values such as the minimum delay needed before a RTC update or the mask used for the sec/min/hour/etc registers. Use a data structure that contains these values and pass as driver data using the platform device ID table for each device. This allows to make the driver's ops callbacks more generic so other RTC that are similar but don't have the same values can also be supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Use usleep_range() instead of msleep()Javier Martinez Canillas1-2/+3
Documentation/timers/timers-howto.txt suggest to use usleep_range() instead of msleep() for small msec (1ms - 20ms) since msleep() will often sleep for 20ms for any value in that range. This is fine in this case since 16ms is the _minimum_ delay required by max77686 for an RTC update but by using usleep_range() instead of msleep(), the driver can support other RTC IP blocks with a shorter minimum delay (i.e: in the range of usecs instead of msecs). Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Use ARRAY_SIZE() instead of current array lengthJavier Martinez Canillas1-11/+12
It is better to use the ARRAY_SIZE() macro instead of the array length to avoid bugs if the array is later changed and the length not updated. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-05rtc: max77686: Fix max77686_rtc_read_alarm() return valueJavier Martinez Canillas1-1/+1
The function is always returning zero even in case of failures since the ret value was not propagated to the callers. Fix the error path. Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25rtc: max77686: Report platform modalias to fix module autoloadJavier Martinez Canillas1-0/+1
If the rtc-max77686 driver is built as a module, modalias information is not filled so the module is not autoloaded. Use the MODULE_DEVICE_TABLE() macro to export the platform ID table so the module contains that data. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-04-17rtc: use more standard kernel logging stylesJoe Perches1-2/+4
Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-20rtc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-14rtc: max77686: Use ffs() to calculate tm_wdayJavier Martinez Canillas1-11/+2
max77686_rtc_calculate_wday() is used to calculate the day of the week to be filled in struct rtc_time but that function only calculates the number of bits shifted. So the ffs() function can be used to find the first bit set instead of a special function. [akpm@linux-foundation.org: add comment clarifying ffs() use] Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: max77686: remove unneeded info logJavier Martinez Canillas1-2/+0
If devm_rtc_device_register() fails a dev_err() is already reported so there is no need to do an additional dev_info(). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Doug Anderson <dianders@chromium.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: max77686: fail to probe if no RTC regmap irqchip is setJavier Martinez Canillas1-0/+6
The max77686 mfd driver adds a regmap IRQ chip which creates an IRQ domain that is used to map the virtual RTC alarm1 interrupt. The RTC driver assumes that this will always be true since the PMIC IRQ is a required property according to the max77686 DT binding doc. If an "interrupts" property is not defined for a max77686 PMIC, then the mfd probe function will fail and the RTC platform driver will never be probed. But even when it is not possible to probe the rtc-max77686 driver without a regmap IRQ chip, it's better to explicitly check if the IRQ chip data is not NULL and gracefully fail instead of getting an OOPS. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: max77686: remove dead code for SMPL and WTSRJavier Martinez Canillas1-101/+0
The MAX77686 RTC chip has two features called SMPL (Sudden Momentary Power Loss) and WTSR (Watchdog Timeout and Software Resets). Support for these features seems to be implemented in the driver but compilation is disabled using a C pre-processor conditional. This code has been disabled since the driver was original merged in commit fca1dd031a28 ("rtc: max77686: add Maxim 77686 driver"). So, since this code has never been built, let's just remove it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: max77686: Allow the max77686 rtc to wakeup the systemDoug Anderson1-0/+28
This series add support for the Real Time clock present in the Maxim 77802 Power Managment IC. The version number is quite high because it previously was part of a bigger series [0] that aimed to add support for all the devices in the max77802 PMIC. But now that the max77802 dependencies were already merged for 3.17, the series were split but I kept the version numbering. While working on the max77802 rtc support a lot of feedback was given and the issues pointed out also apply to a driver for a similar PMIC RTC (max77686). So patches 01/06 to 05/06 in the series are cleanups for the max77686 driver and patch 06/06 adds the support for the max77802 RTC. The series were tested on an Exynos5250 Snow (max77686) and Exynos5420 Peach Pit (max77802) machines. This patch (of 6): The max77686 includes an RTC that keeps power during suspend. It's convenient to be able to use it as a wakeup source. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-21mfd: max77686: Convert to use regmap_irqJavier Martinez Canillas1-19/+8
By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-09-12drivers/rtc/rtc-max77686.c: Fix wrong registerSangjung Woo1-2/+2
Fix a read of the wrong register when checking whether the RTC timer has reached the alarm time. Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> Signed-off-by: Myugnjoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04drivers/rtc/rtc-max77686.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04drivers/rtc/rtc-max77686.c: remove space before semicolonSachin Kamat1-1/+1
Fixes the following warning: WARNING: space prohibited before semicolon Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/rtc/rtc-max77686.c: use devm_regmap_init_i2c()Sachin Kamat1-1/+1
This driver already uses other devm_* APIs. Convert regmap_init_i2c too. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/rtc/rtc-max77686.c: fix incorrect return value on errorSachin Kamat1-4/+4
'ret' was not initialized to error code before returning. While at it also remove some redundant code and cleanup. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Chiwoong Byun <woong.byun@samsung.com> Cc: Jonghwa Lee <jonghwa3.lee@samsung.com> Cc: Laxman dewangan <ldewangan@nvidia.com> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30rtc: rtc-max77686: use devm_rtc_device_register()Jingoo Han1-11/+4
devm_rtc_device_register() is device managed and makes cleanup paths simpler. Also, this patch uses devm_request_threaded_irq(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/rtc/rtc-max77686.c: use dev_info()/dev_emerg() instead of ↵Jingoo Han1-6/+9
pr_info()/pr_emerg() dev_info()/dev_emerg() are preferred to pr_info()/pr_emerg(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/rtc/rtc-max77686.c: fix indentation of bit definitionsJingoo Han1-5/+5
Fix indentation of bit definitions to enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/rtc/rtc-max77686.c: use devm_kzalloc()Jingoo Han1-7/+2
Use devm_kzalloc() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/rtc/rtc-max77686.c: add missing module author nameJingoo Han1-1/+1
Add missing module author name to MODULE_AUTHOR macro. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30drivers/rtc/rtc-max77686.c: use module_platform_driver()Jingoo Han1-11/+1
Use module_platform_driver() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 19:53:31 +0300