summaryrefslogtreecommitdiff
path: root/drivers/rpmsg
AgeCommit message (Collapse)AuthorFilesLines
2022-03-13rpmsg: ctrl: Introduce new RPMSG_CREATE/RELEASE_DEV_IOCTL controlsArnaud Pouliquen1-4/+32
Allow the user space application to create and release an rpmsg device by adding RPMSG_CREATE_DEV_IOCTL and RPMSG_RELEASE_DEV_IOCTL ioctrls to the /dev/rpmsg_ctrl interface The RPMSG_CREATE_DEV_IOCTL Ioctl can be used to instantiate a local rpmsg device. Depending on the back-end implementation, the associated rpmsg driver is probed and a NS announcement can be sent to the remote processor. The RPMSG_RELEASE_DEV_IOCTL allows the user application to release a rpmsg device created either by the remote processor or with the RPMSG_CREATE_DEV_IOCTL call. Depending on the back-end implementation, the associated rpmsg driver is removed and a NS destroy rpmsg can be sent to the remote processor. Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-12-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: char: Introduce the "rpmsg-raw" channelArnaud Pouliquen1-0/+60
For the rpmsg virtio backend, the current implementation of the rpmsg char only allows to instantiate static(i.e. prefixed source and destination addresses) end points, and only on the Linux user space initiative. This patch defines the "rpmsg-raw" channel and registers it to the rpmsg bus. This registration allows: - To create the channel at the initiative of the remote processor relying on the name service announcement mechanism. In other words the /dev/rpmsgX interface is instantiate by the remote processor. - To use the channel object instead of the endpoint, thus preventing the user space from having the knowledge of the remote processor's endpoint addresses. - To rely on udev to be inform when a /dev/rpmsgX is created on remote processor request, indicating that the remote processor is ready to communicate. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-11-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: char: Add possibility to use default endpoint of the rpmsg deviceArnaud Pouliquen1-2/+19
Current implementation create/destroy a new endpoint on each rpmsg_eptdev_open/rpmsg_eptdev_release calls. For a rpmsg device created by the NS announcement a default endpoint is created. In this case we have to reuse the default rpmsg device endpoint associated to the channel instead of creating a new one. This patch prepares the introduction of a rpmsg channel device for the char device. The rpmsg channel device will require a default endpoint to communicate to the remote processor. Add the default_ept field in rpmsg_eptdev structure.This pointer determines the behavior on rpmsg_eptdev_open and rpmsg_eptdev_release call. - If default_ept == NULL: Use the legacy behavior by creating a new endpoint each time rpmsg_eptdev_open is called and release it when rpmsg_eptdev_release is called on /dev/rpmsgX device open/close. - If default_ept is set: use the rpmsg device default endpoint for the communication. Add protection in rpmsg_eptdev_ioctl to prevent to destroy a default endpoint. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-10-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: char: Refactor rpmsg_chrdev_eptdev_create functionArnaud Pouliquen1-5/+28
Introduce the rpmsg_chrdev_eptdev_alloc and rpmsg_chrdev_eptdev_add internal function to split the allocation part from the device add. This patch prepares the introduction of a rpmsg channel device for the char device. An default endpoint will be created, referenced in the rpmsg_eptdev structure before adding the devices. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-9-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: Update rpmsg_chrdev_register_device functionArnaud Pouliquen5-8/+8
The rpmsg_chrdev driver has been replaced by the rpmsg_ctrl driver for the /dev/rpmsg_ctrlX devices management. The reference for the driver override is now the rpmsg_ctrl. Update the rpmsg_chrdev_register_device function to reflect the update, and rename the function to use the rpmsg_ctrldev prefix. The platform drivers are updated accordingly. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-8-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: Move the rpmsg control device from rpmsg_char to rpmsg_ctrlArnaud Pouliquen4-158/+226
Create the rpmsg_ctrl.c module and move the code related to the rpmsg_ctrldev device in this new module. Add the dependency between rpmsg_char and rpmsg_ctrl in the kconfig file: 1) RPMSG_CTRL can set as module or built-in if RPMSG=y || RPMSG_CHAR=y || RPMSG_CHAR=n 2) RPMSG_CTRL can not be set as built-in if RPMSG=m || RPMSG_CHAR=m Note that RPMGH_CHAR and RPMSG_CTRL can be activated separately. Therefore, the RPMSG_CTRL configuration must be set for backwards compatibility. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-4-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: Create the rpmsg class in core instead of in rpmsg charArnaud Pouliquen3-12/+16
Migrate the creation of the rpmsg class from the rpmsg_char to the core that the class is usable by the rpmsg_char and the future rpmsg_ctrl module. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-3-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: char: Export eptdev create and destroy functionsArnaud Pouliquen2-7/+57
To prepare the split of the code related to the control (ctrldev) and the endpoint (eptdev) devices in 2 separate files: - Rename and export the functions in rpmsg_char.h. - Suppress the dependency with the rpmsg_ctrldev struct in the rpmsg_eptdev_create function. Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220124102524.295783-2-arnaud.pouliquen@foss.st.com
2022-03-13rpmsg: char: treat rpmsg_trysend() ENOMEM as EAGAINTim Blechmann1-2/+5
rpmsg_trysend() returns -ENOMEM when no rpmsg buffer can be allocated. this causes write to fail with this error as opposed to -EAGAIN. this is what user space applications (and libraries like boost.asio) would expect when using normal character devices. Signed-off-by: Tim Blechmann <tim@klingt.org> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220313024541.1579848-2-tim@klingt.org
2022-03-12rpmsg: qcom_smd: Fix redundant channel->registered assignmentAngeloGioacchino Del Regno1-2/+0
In qcom_channel_state_worker(), we are setting channel->registered to true when registering a channel, but this is getting repeated both before and after re-locking the channels_lock spinlock, which is obviously a typo. Remove the assignment done out of the spinlock to fix this redundancy. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220114133259.247726-1-angelogioacchino.delregno@collabora.com
2022-03-11rpmsg: use struct_size over open coded arithmeticMinghao Chi (CGEL ZTE)1-1/+1
Replace zero-length array with flexible-array member and make use of the struct_size() helper in kzalloc(). For example: struct glink_defer_cmd { struct list_head node; struct glink_msg msg; u8 data[]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220216030720.1839503-1-chi.minghao@zte.com.cn
2022-03-11rpmsg: smd: allow opening rpm_requests even if already openedLuca Weiss1-1/+6
On msm8953 the channel seems to be already opened when booting Linux but we still need to open it for communication with regulators etc. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220220201909.445468-6-luca@z3ntu.xyz
2022-03-11rpmsg: qcom_smd: Promote to arch_initcallKonrad Dybcio1-1/+1
qcom_smd's only child, smd-rpm uses arch_initcall and both have to be up before almost anything else to ensure the MSM SoCs will work fine and nothing will have to resort to probe defering, as this is the main pillar of all things DVFS on these machines. Promote it to arch_initcall to avoid such issues. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211230023253.1123142-1-konrad.dybcio@somainline.org
2022-01-27Merge tag 'rpmsg-v5.17-fixes' of ↵Linus Torvalds1-18/+4
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg fixes from Bjorn Andersson: "The cdev cleanup in the rpmsg_char driver was not performed properly, resulting in unpredicable behaviour when the parent remote processor is stopped with any of the cdevs open by a client. Two patches transitions the implementation to use cdev_device_add() and cdev_del_device(), to capture the relationship between the two objects, and relocates the incorrectly placed cdev_del()" * tag 'rpmsg-v5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+1
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-18rpmsg: char: Fix race between the release of rpmsg_eptdev and cdevMatthias Kaehlcke1-9/+2
struct rpmsg_eptdev contains a struct cdev. The current code frees the rpmsg_eptdev struct in rpmsg_eptdev_destroy(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_eptdev could be freed before the cdev is entirely released. The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface") Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.2.Idde68b05b88d4a2e6e54766c653f3a6d9e419ce6@changeid
2022-01-18rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdevSujit Kautkar1-9/+2
struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface") Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.1.Iaac908f3e3149a89190ce006ba166e2d3fd247a3@changeid
2022-01-15virtio: wrap config->reset callsMichael S. Tsirkin1-1/+1
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-12-08rpmsg: core: Clean up resources on announce_create failure.Arnaud Pouliquen1-4/+16
During the rpmsg_dev_probe, if rpdev->ops->announce_create returns an error, the rpmsg device and default endpoint should be freed before exiting the function. Fixes: 5e619b48677c ("rpmsg: Split rpmsg core and virtio backend") Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211206190758.10004-1-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-11-18rpmsg: Fix documentation return formattingArnaud Pouliquen4-15/+15
kernel documentation specification: "The return value, if any, should be described in a dedicated section named Return." Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20211108140126.3530-1-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-11-18rpmsg: char: Add pr_fmt() to prefix messagesArnaud Pouliquen1-2/+5
Make all messages to be prefixed in a unified way. Add pr_fmt() to achieve this. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20211108135945.3364-1-arnaud.pouliquen@foss.st.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2021-11-10Merge tag 'rproc-v5.16' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "The remoteproc repo is moved to a new path on git.kernel.org, to allow Mathieu push access to the branches. Support for the Mediatek MT8195 SCP was added, the related DeviceTree binding was converted to YAML and MT8192 SCP was documented as well. Amlogic Meson6, Meson8, Meson8b and Meson8m2 has an ARC core to aid in resuming the system after suspend, a new remoteproc driver for booting this core is introduced. A new driver to support the DSP processor found on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP is added. The Qualcomm modem and TrustZone based remoteproc drivers gains support for the modem in SC7280 and MSM8996 gains support for a missing power-domain. Throughout the Qualcomm drivers, the support for informing the always-on power coprocessor about the state of each remoteproc is reworked to avoid complications related to our use of genpd and the system suspend state. Lastly a number of small fixes are found throughout the drivers and framework" * tag 'rproc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (39 commits) remoteproc: Remove vdev_to_rvdev and vdev_to_rproc from remoteproc API remoteproc: omap_remoteproc: simplify getting .driver_data remoteproc: qcom_q6v5_mss: Use devm_platform_ioremap_resource_byname() to simplify code remoteproc: Fix a memory leak in an error handling path in 'rproc_handle_vdev()' remoteproc: Fix spelling mistake "atleast" -> "at least" remoteproc: imx_dsp_rproc: mark PM functions as __maybe_unused remoteproc: imx_dsp_rproc: Correct the comment style of copyright dt-bindings: dsp: fsl: Update binding document for remote proc driver remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX remoteproc: imx_rproc: Add IMX_RPROC_SCU_API method remoteproc: imx_rproc: Move common structure to header file rpmsg: char: Remove useless include remoteproc: meson-mx-ao-arc: fix a bit test remoteproc: mss: q6v5-mss: Add modem support on SC7280 dt-bindings: remoteproc: qcom: Update Q6V5 Modem PIL binding remoteproc: qcom: pas: Add SC7280 Modem support dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998 MAINTAINERS: Update remoteproc repo url dt-bindings: remoteproc: k3-dsp: Cleanup SoC compatible from DT example ...
2021-11-10Merge tag 'rpmsg-v5.16' of ↵Linus Torvalds3-11/+84
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: "For the GLINK implementation this adds support for splitting outgoing messages that are too large to fit in the fifo, it introduces the use of "read notifications", to avoid polling in the case where the outgoing fifo is full and a few bugs are squashed. The return value of rpmsg_create_ept() for when RPMSG is disabled is corrected to return a valid error, the Mediatek rpmsg driver is updated to match the DT binding and a couple of cleanups are done in the virtio rpmsg driver" * tag 'rpmsg-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: glink: Send READ_NOTIFY command in FIFO full case rpmsg: glink: Remove channel decouple from rpdev release rpmsg: glink: Remove the rpmsg dev in close_ack rpmsg: glink: Add TX_DATA_CONT command while sending rpmsg: virtio_rpmsg_bus: use dev_warn_ratelimited for msg with no recipient rpmsg: virtio: Remove unused including <linux/of_device.h> rpmsg: Change naming of mediatek rpmsg property rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined rpmsg: glink: Replace strncpy() with strscpy_pad()
2021-10-21rpmsg: core: add API to get MTUArnaud Pouliquen3-0/+33
Return the rpmsg buffer MTU for sending message, so rpmsg users can split a long message in several sub rpmsg buffers. Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20211015094701.5732-2-arnaud.pouliquen@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-15rpmsg: glink: Send READ_NOTIFY command in FIFO full caseArun Kumar Neelakantam1-1/+35
The current design sleeps unconditionally in TX FIFO full case and wakeup only after sleep timer expires which adds random delays in clients TX path. Avoid sleep and use READ_NOTIFY command so that writer can be woken up when remote notifies about read completion by sending IRQ. Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1596086296-28529-7-git-send-email-deesin@codeaurora.org
2021-10-15rpmsg: glink: Remove channel decouple from rpdev releaseChris Lew1-2/+0
If a channel is being rapidly restarting and the kobj release worker is busy, there is a chance the rpdev_release function will run after the channel struct itself has been released. There should not be a need to decouple the channel from rpdev in the rpdev release since that should only happen from the close commands. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1596086296-28529-6-git-send-email-deesin@codeaurora.org
2021-10-15rpmsg: glink: Remove the rpmsg dev in close_ackArun Kumar Neelakantam1-0/+12
Un-register and register of rpmsg driver is sending invalid open_ack on closed channel. To avoid sending invalid open_ack case unregister the rpmsg device after receiving the local_close_ack from remote side. Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> [bjorn: s/strlcpy/strscpy/] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1596086296-28529-5-git-send-email-deesin@codeaurora.org
2021-10-15rpmsg: glink: Add TX_DATA_CONT command while sendingArun Kumar Neelakantam1-4/+34
With current design the transport can send packets of size upto FIFO_SIZE which is 16k and return failure for all packets above 16k. Add TX_DATA_CONT command to send packets greater than 16k by splitting into 8K chunks. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1596086296-28529-4-git-send-email-deesin@codeaurora.org
2021-10-09rpmsg: virtio_rpmsg_bus: use dev_warn_ratelimited for msg with no recipientAlexandru Ardelean1-1/+1
Even though it may be user-space's fault for this error (some application terminated or crashed without cleaning up it's endpoint), the rpmsg communication should not overflow the syslog with too many messages. A dev_warn_ratelimited() seems like a good alternative in case this can occur. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928132902.1594277-1-aardelean@deviqon.com
2021-10-09rpmsg: virtio: Remove unused including <linux/of_device.h>Cai Huoqing1-1/+0
Remove including <linux/of_device.h> that don't need it. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210811123125.143-1-caihuoqing@baidu.com
2021-10-09rpmsg: char: Remove useless includeArnaud Pouliquen1-2/+0
No facility requests the include of rpmsg_internal.h header file. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210712123752.10449-2-arnaud.pouliquen@foss.st.com
2021-09-28rpmsg: Change naming of mediatek rpmsg propertyTinghan Shen1-1/+1
Change from "mtk,rpmsg-name" to "mediatek,rpmsg-name" to sync with the vendor name defined in vendor-prefixes.yaml. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Link: https://lore.kernel.org/r/20210924033935.2127-6-tinghan.shen@mediatek.com [Fixed capital letter in title] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-09-13rpmsg: glink: Replace strncpy() with strscpy_pad()Kees Cook1-1/+1
The use of strncpy() is considered deprecated for NUL-terminated strings[1]. Replace strncpy() with strscpy_pad() (as it seems this case expects the NUL padding to fill the allocation following the flexible array). This additionally silences a warning seen when building under -Warray-bounds: ./include/linux/fortify-string.h:38:30: warning: '__builtin_strncpy' offset 24 from the object at '__mptr' is out of the bounds of referenced subobject 'data' with type 'u8[]' {aka 'unsigned char[]'} at offset 24 [-Warray-bounds] 38 | #define __underlying_strncpy __builtin_strncpy | ^ ./include/linux/fortify-string.h:50:9: note: in expansion of macro '__underlying_strncpy' 50 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ drivers/rpmsg/qcom_glink_native.c: In function 'qcom_glink_work': drivers/rpmsg/qcom_glink_native.c:36:5: note: subobject 'data' declared here 36 | u8 data[]; | ^~~~ [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/lkml/20210728020745.GB35706@embeddedor Link: https://lore.kernel.org/r/20210818060533.3569517-4-keescook@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-07-21bus: Make remove callback return voidUwe Kleine-König1-5/+2
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18rpmsg: core: Add driver_data for rpmsg_device_idStephan Gerhold1-1/+3
Most device_id structs provide a driver_data field that can be used by drivers to associate data more easily for a particular device ID. Add the same for the rpmsg_device_id. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()Jia-Ju Bai1-0/+1
When idr_find() returns NULL to intent, no error return code of qcom_glink_rx_data() is assigned. To fix this bug, ret is assigned with -ENOENT in this case. Fixes: 64f95f87920d ("rpmsg: glink: Use the local intents when receiving data") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20210306133624.17237-1-baijiaju1990@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-17rpmsg: char: Return an error if device already openArnaud Pouliquen1-0/+3
The rpmsg_create_ept function is invoked when the device is opened. As only one endpoint must be created per device. It is not possible to open the same device twice. But there is nothing to prevent multi open. Return -EBUSY when device is already opened to have a generic error instead of relying on the back-end to potentially detect the error. Without this patch for instance the GLINK driver return -EBUSY while the virtio bus return -ENOSPC. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20210311140413.31725-7-arnaud.pouliquen@foss.st.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-17rpmsg: virtio: Register the rpmsg_char deviceArnaud Pouliquen1-5/+57
Instantiate the rpmsg_char device on virtio RPMsg bus creation. This provides the capability, with the RPMSG_CREATE_EPT_IOCTL ioctl, to create RPMsg char device endpoints relying on the rpmsg_chrdev_create_eptdev API. Notice that the created endpoints are attached to the rpmsg_ctldev device, but not associated to a channel. As consequence, the endpoint source and destination addresses have to been specified and there is no channel creation and no name service announcement to inform the remote side. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20210311140413.31725-6-arnaud.pouliquen@foss.st.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-17rpmsg: char: Use rpmsg_sendto to specify the message destination addressArnaud Pouliquen3-2/+34
When the endpoint device is created by the application, a destination address is specified in the rpmsg_channel_info structure. Since the rpmsg_endpoint structure does not store the destination address, this destination address must be specified when sending a message. Replaces rpmsg_send with rpmsg_sendto to allow to specify the destination address. This implementation is requested for compatibly with some rpmsg backends like the virtio backend. For this, the GLINK an SMD drivers have been updated to support the rpmsg_sendto, even if the destination address is ignored for these backends. For these drivers, the rpmsg_send and rpmsg_trysend ops are preserved to avoid breaking the legacy. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210311140413.31725-5-arnaud.pouliquen@foss.st.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-17rpmsg: char: Rename rpmsg_char_init to rpmsg_chrdev_initArnaud Pouliquen1-2/+2
To be coherent with the other functions which are prefixed by rpmsg_chrdev, rename the rpmsg_char_init function. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Link: https://lore.kernel.org/r/20210311140413.31725-2-arnaud.pouliquen@foss.st.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-06rpmsg: glink: add include of header fileAlex Elder1-0/+1
With an x86_64 architecture W=1 build, qcom_glink_ssr_notify() is reported as having no previous prototype. The prototype is found in "qcom_glink.h", so we just need "qcom_glink_ssr.c" to include that file. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210105235528.32538-1-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-06rpmsg: glink: fix some kerneldoc commentsAlex Elder1-8/+8
The kerneldoc comments for the do_cleanup_msg and cleanup_done_msg structures describe the fields, but don't prefix the field names with "@". Add those, to get rid of some W=1 build warnings on an x86_64 architecture build. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210105235603.32663-1-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24rpmsg: Turn name service into a stand alone driverArnaud Pouliquen4-67/+156
Make the RPMSG name service announcement a stand alone driver so that it can be reused by other subsystems. It is also the first step in making the functionatlity transport independent, i.e that is not tied to virtIO. Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Co-developed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Co-developed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20201120214245.172963-9-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24rpmsg: Make rpmsg_{register|unregister}_device() publicMathieu Poirier1-4/+0
Make function rpmsg_register_device() and rpmsg_unregister_device() functions public so that they can be used by other clients. While doing so get rid of two obsolete function, i.e register_rpmsg_device() and unregister_rpmsg_device(), to prevent confusion. Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201120214245.172963-8-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24rpmsg: virtio: Add rpmsg channel device opsArnaud Pouliquen1-0/+22
Implement the create and release of the RPMsg channel for the RPMsg virtio bus. Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201120214245.172963-7-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24rpmsg: core: Add channel creation internal APIArnaud Pouliquen2-0/+54
Add the channel creation API as a first step to be able to define the name service announcement as a rpmsg driver independent from the RPMsg virtio bus. Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201120214245.172963-6-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24rpmsg: virtio: Rename rpmsg_create_channelArnaud Pouliquen1-3/+3
Rename the internal function as it is internal, and as the name will be used in rpmsg_core. Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201120214245.172963-5-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24rpmsg: Move structure rpmsg_ns_msg to header fileMathieu Poirier1-31/+1
Move structure rpmsg_ns_msg to its own header file so that it can be used by other entities. Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201120214245.172963-4-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24rpmsg: virtio: Move from virtio to rpmsg byte conversionMathieu Poirier1-25/+28
Use rpmsg byte conversion functions in order for the RPMSG headers and generic functions to be used by external entities. Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201120214245.172963-3-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-22Merge tag 'rpmsg-v5.10' of ↵Linus Torvalds5-23/+97
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This introduces rpmsg_char support for GLINK and fixes a few issues" * tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: glink: Expose rpmsg name attr for glink rpmsg: glink: Add support for rpmsg glink chrdev rpmsg: Guard against null endpoint ops in destroy rpmsg: glink: Use complete_all for open states rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description rpmsg: Avoid double-free in mtk_rpmsg_register_device rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 19:15:28 +0300