summaryrefslogtreecommitdiff
path: root/drivers/reset
AgeCommit message (Collapse)AuthorFilesLines
2023-09-25reset: starfive: jh7110: Drop the unused EXPORT_SYMBOL_GPLHal Feng1-1/+0
reset_starfive_jh7110_generic_probe() is never called by other modules, so drop the EXPORT_SYMBOL_GPL for it. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2023-04-26reset: starfive: jh7110: Standardize the copyrightHal Feng1-1/+2
Standardize the StarFive copyright information. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
2022-06-14reset:starfive:jh7110: Delete redundant logicClivia.Cai1-45/+5
In the hardware design, the IPs RESET signal of jh7110 is divided into two groups, one group is active high, and the other group is active low. However, the software does not need to distinguish whether the RESET signal is active high or active low, Write 1 to be assert, and write 0 to deassert. Therefore, the software does not need to add additional logic to distinguish these two sets of signals. Signed-off-by: Clivia.Cai <Clivia.Cai@starfivetech.com>
2022-04-19reset:starfive:jh7110: Macro definitions are rearranged in order.samin1-12/+9
Macro definitions are rearranged in order, for better coding style. Signed-off-by: samin <samin.guo@starfivetech.com>
2022-04-19reset:starfive:jh7110: change how to obtain an assert addresssamin1-45/+59
Get assert addresses dynamically to reduce static array memory usage Signed-off-by: samin <samin.guo@starfivetech.com>
2022-01-05reset: starfive-jh7110: Add isp/vout reset support.samin1-2/+30
Add isp/vout reset support for jh7110. Signed-off-by: samin <samin.guo@starfivetech.com>
2022-01-05reset: starfive-jh7110: use platform_ioremap_iomem_byname.samin1-3/+17
The reset module is scattered in several domains, and each address segment may be located in the module device management. Using devm_platform_get_and_ioremap_resource->devm_ioremap_resource will cause the address of this segment to be occupied by the reset driver, and other modules cannot be used, so use ioremap that can be mapped multiple times instead. Signed-off-by: samin <samin.guo@starfivetech.com>
2021-12-22reset: starfive-jh7110: Add StarFive JH7110 reset driversamin5-0/+270
Add a driver for the StarFive JH7110 reset controller. Signed-off-by: samin <samin.guo@starfivetech.com>
2021-10-05reset: socfpga: add empty driver allowing consumers to probePaweł Anikiel1-0/+26
The early reset driver doesn't ever probe, which causes consuming devices to be unable to probe. Add an empty driver to set this device as available, allowing consumers to probe. Signed-off-by: Paweł Anikiel <pan@semihalf.com> Link: https://lore.kernel.org/r/20210920124141.1166544-4-pan@semihalf.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-10-05reset: tegra-bpmp: Handle errors in BPMP responseMikko Perttunen1-1/+8
The return value from tegra_bpmp_transfer indicates the success or failure of the IPC transaction with BPMP. If the transaction succeeded, we also need to check the actual command's result code. Add code to do this. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Link: https://lore.kernel.org/r/20210915085517.1669675-2-mperttunen@nvidia.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-10-05reset: pistachio: Re-enable driver selectionGeert Uytterhoeven1-2/+2
After the retirement of MACH_PISTACHIO, the Pistachio Reset Driver is no longer auto-enabled when building a kernel for Pistachio systems. Worse, the driver cannot be enabled by the user at all (unless compile-testing), as the config symbol is invisible. Fix this partially by making the symbol visible again when compiling for MIPS, and dropping the useless default. The user still has to enable the driver manually when building a kernel for Pistachio systems, though. Fixes: 104f942b2832ab13 ("MIPS: Retire MACH_PISTACHIO") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://lore.kernel.org/r/2c399e52540536df9c4006e46ef93fbccdde88db.1631610825.git.geert+renesas@glider.be Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-10-05reset: brcmstb-rescal: fix incorrect polarity of status bitJim Quinlan1-1/+1
The readl_poll_timeout() should complete when the status bit is a 1, not 0. Fixes: 4cf176e52397 ("reset: Add Broadcom STB RESCAL reset controller") Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210914221122.62315-1-f.fainelli@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds4-12/+234
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-08-23reset: reset-zynqmp: Fixed the argument data typeSai Krishna Potthuri1-1/+2
This patch changes the data type of the variable 'val' from int to u32. Addresses-Coverity: argument of type "int *" is incompatible with parameter of type "u32 *" Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/925cebbe4eb73c7d0a536da204748d33c7100d8c.1624448778.git.michal.simek@xilinx.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-08-23reset: simple: remove ZTE details in Kconfig helpPeter Robinson1-1/+0
The ZTE platform support in the simple reset driver has been removed but the comment in the help wasn't removed so clean this up too. Fixes: 89d4f98ae90d ("ARM: remove zte zx platform") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210821094528.294579-1-pbrobinson@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-07-27reset: renesas: Add RZ/G2L usbphy control driverBiju Das3-0/+183
Add support for RZ/G2L USBPHY Control driver. It mainly controls reset and power down of the USB/PHY. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210719121938.6532-5-biju.das.jz@bp.renesas.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-07-21reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5Geert Uytterhoeven1-1/+1
The Microchip Sparx5 switch reset block is only present on Microchip Sparx5 SoCs. Hence add a dependency on ARCH_SPARX5, to prevent asking the user about this driver when configuring a kernel without Sparx5 support. Fixes: 453ed4283bebd077 ("reset: mchp: sparx5: add switch reset driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6e08f6f46123d0712397e901716b48f13fa5dc48.1624627657.git.geert@linux-m68k.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-07-21reset: qcom: Add PDC Global reset signals for WPSSSibi Sankar1-11/+51
Add PDC Global reset signals for Wireless Processor Subsystem (WPSS) on SC7280 SoCs. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/1619693465-5724-5-git-send-email-sibis@codeaurora.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-07-10Merge tag 'arm-drivers-5.14' of ↵Linus Torvalds15-27/+196
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Olof Johansson: - Reset controllers: Adding support for Microchip Sparx5 Switch. - Memory controllers: ARM Primecell PL35x SMC memory controller driver cleanups and improvements. - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN. - Rockchip: RK3568 power domains support + DT binding updates, cleanups. - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details, including support for MSM8226, MDM9607, SM6125 and SC8180X. - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management interfaces and communication (including bus model) between partitions both in Normal and Secure Worlds. - Tegra Memory controller changes, including major rework to deal with identity mappings at boot and integration with ARM SMMU pieces. * tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits) firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string firmware: turris-mox-rwtm: show message about HWRNG registration firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng firmware: turris-mox-rwtm: report failures better firmware: turris-mox-rwtm: fix reply status decoding function soc: imx: gpcv2: add support for i.MX8MN power domains dt-bindings: add defines for i.MX8MN power domains firmware: tegra: bpmp: Fix Tegra234-only builds iommu/arm-smmu: Use Tegra implementation on Tegra186 iommu/arm-smmu: tegra: Implement SID override programming iommu/arm-smmu: tegra: Detect number of instances at runtime dt-bindings: arm-smmu: Add Tegra186 compatible string firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml memory: emif: remove unused frequency and voltage notifiers memory: fsl_ifc: fix leak of private memory on probe failure memory: fsl_ifc: fix leak of IO mapping on probe failure ...
2021-06-29reset: stm32mp1: remove stm32mp1 resetGabriel Fernandez3-122/+0
st32mp1 RCC reset driver was moved into stm32mp1 RCC clock driver. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-7-gabriel.fernandez@foss.st.com Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-07reset: berlin: support module buildJisheng Zhang2-4/+11
Make reset-berlin driver to be tristate module, support to build as a module, this is useful for GKI. Partially reverts commit ed4dba99cae8 ("reset: berlin: make it explicitly non-modular") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210607181015.5b8d3711@xhacker.debian Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-06-07reset: bail if try_module_get() failsPhilipp Zabel1-1/+4
Abort instead of returning a new reset control for a reset controller device that is going to have its module unloaded. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 61fc41317666 ("reset: Add reset controller API") Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210607082615.15160-1-p.zabel@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-06-07reset: mchp: sparx5: fix return value check in mchp_sparx5_map_io()Wei Yongjun1-2/+2
In case of error, the function devm_platform_get_and_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 453ed4283beb ("reset: mchp: sparx5: add switch reset driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210519141638.3052456-1-weiyongjun1@huawei.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-06-07reset: lantiq: use devm_reset_controller_register()Yang Yingliang1-1/+1
Use devm_reset_controller_register() for the reset controller registration. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210517032648.2969609-1-yangyingliang@huawei.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-06-07reset: hi6220: Use the correct HiSilicon copyrightHao Fang1-1/+1
s/Hisilicon/HiSilicon/g. It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang <fanghao11@huawei.com> Link: https://lore.kernel.org/r/1617087044-19572-1-git-send-email-fanghao11@huawei.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-12reset: brcmstb: Add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 77750bc089e4 ("reset: Add Broadcom STB SW_INIT reset controller driver") Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620789283-15048-1-git-send-email-zou_wei@huawei.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: a10sr: add missing of_match_table referenceKrzysztof Kozlowski1-0/+1
The driver defined of_device_id table but did not use it with of_match_table. This prevents usual matching via devicetree and causes a W=1 warning: drivers/reset/reset-a10sr.c:111:34: warning: ‘a10sr_reset_of_match’ defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Fixes: 627006820268 ("reset: Add Altera Arria10 SR Reset Controller") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210507112803.20012-1-krzysztof.kozlowski@canonical.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: RESET_INTEL_GW should depend on X86Geert Uytterhoeven1-0/+1
The Intel Gateway reset controller is only present on Intel Gateway platforms. Hence add a dependency on X86, to prevent asking the user about this driver when configuring a kernel without Intel Gateway support. Fixes: c9aef213e38cde27 ("reset: intel: Add system reset controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: RESET_BRCMSTB_RESCAL should depend on ARCH_BRCMSTBGeert Uytterhoeven1-1/+2
The Broadcom STB RESCAL reset controller is only present on Broadcom BCM7216 platforms. Hence add a dependency on ARCH_BRCMSTB, to prevent asking the user about this driver when configuring a kernel without BCM7216 support. Also, merely enabling CONFIG_COMPILE_TEST should not enable additional code, and thus should not enable this driver by default. Fixes: 4cf176e52397853e ("reset: Add Broadcom STB RESCAL reset controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: uniphier: enclose UNIPHIER_RESET_ID_END value in parenthesesPhilipp Zabel1-1/+1
Fixes a checkpatch error: ERROR: Macros with complex values should be enclosed in parentheses #23: FILE: drivers/reset/reset-uniphier.c:23: +#define UNIPHIER_RESET_ID_END (unsigned int)(-1) Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: sti/syscfg: replace comma with semicolonPhilipp Zabel1-1/+1
Fixes a checkpatch warning: WARNING: Possible comma where semicolon could be used #156: FILE: drivers/reset/sti/reset-syscfg.c:156: + rc->rst.ops = &syscfg_reset_ops, + rc->rst.of_node = dev->of_node; Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: ti-syscon: fix to_ti_syscon_reset_data macroPhilipp Zabel1-2/+2
The to_ti_syscon_reset_data macro currently only works if the parameter passed into it is called 'rcdev'. Fixes a checkpatch --strict issue: CHECK: Macro argument reuse 'rcdev' - possible side-effects? #53: FILE: drivers/reset/reset-ti-syscon.c:53: +#define to_ti_syscon_reset_data(rcdev) \ + container_of(rcdev, struct ti_syscon_reset_data, rcdev) Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: berlin: replace unsigned with unsigned intPhilipp Zabel1-1/+1
Fixes a checkpatch warning: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' #55: FILE: drivers/reset/reset-berlin.c:55: + unsigned offset, bit; Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: whitespace fixesPhilipp Zabel1-10/+10
Fixes checkpatch issues: CHECK: Alignment should match open parenthesis #87: FILE: drivers/reset/core.c:87: +static int of_reset_simple_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) CHECK: Lines should not end with a '(' #540: FILE: drivers/reset/core.c:540: +static struct reset_control *__reset_control_get_internal( CHECK: Alignment should match open parenthesis #603: FILE: drivers/reset/core.c:603: +struct reset_control *__of_reset_control_get(struct device_node *node, + const char *id, int index, bool shared, CHECK: Alignment should match open parenthesis #781: FILE: drivers/reset/core.c:781: +struct reset_control *__devm_reset_control_get(struct device *dev, + const char *id, int index, bool shared, Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: mchp: sparx5: add switch reset driverSteen Hegelund3-0/+155
The Sparx5 Switch SoC has a number of components that can be reset indiviually, but at least the Switch Core needs to be in a well defined state at power on, when any of the Sparx5 drivers starts to access the Switch Core, this reset driver is available. The reset driver is loaded early via the postcore_initcall interface, and will then be available for the other Sparx5 drivers (SGPIO, SwitchDev etc) that are loaded next, and the first of them to be loaded can perform the one-time Switch Core reset that is needed. The driver has protection so that the system busses, DDR controller, PCI-E and ARM A53 CPU and a few other subsystems are not touched by the reset. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: oxnas: replace file name with short descriptionPhilipp Zabel1-1/+1
Fixes a checkpatch warning: WARNING: It's generally not useful to have the filename in the file #3: FILE: drivers/reset/reset-oxnas.c:3: + * drivers/reset/reset-oxnas.c Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2021-05-10reset: zynqmp: replace spaces with tabsPhilipp Zabel1-2/+2
Fixes checkpatch issues: ERROR: code indent should use tabs where possible #86: FILE: drivers/reset/reset-zynqmp.c:86: + .reset_id = 0,$ WARNING: please, no spaces at the start of a line #86: FILE: drivers/reset/reset-zynqmp.c:86: + .reset_id = 0,$ ERROR: code indent should use tabs where possible #87: FILE: drivers/reset/reset-zynqmp.c:87: + .num_resets = VERSAL_NR_RESETS,$ WARNING: please, no spaces at the start of a line #87: FILE: drivers/reset/reset-zynqmp.c:87: + .num_resets = VERSAL_NR_RESETS,$ Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2021-05-10reset: bcm6345: Make reset_control_ops constPhilipp Zabel1-1/+1
The bcm6345_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-04clk: sifive: Use reset-simple in prci driver for PCIe driverGreentime Hu1-0/+1
We use reset-simple in this patch so that pcie driver can use devm_reset_control_get() to get this reset data structure and use reset_control_deassert() to deassert pcie_power_up_rst_n. Link: https://lore.kernel.org/r/20210504105940.100004-3-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stephen Boyd <sboyd@kernel.org>
2021-04-30Merge tag 'sound-5.13-rc1' of ↵Linus Torvalds1-0/+215
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No surprises in this development cycle, and most of work is about the fixes and the improvements of the existing code, while a new LED control layer and a few new drivers have been introduced. Here are some highlights: Core: - A common mute-LED framework was introduced. It is used by HD-audio for now, more adaption will follow later. The former "Mic Mute-LED Mode" mixer control has been replaced with the corresponding sysfs now. - User-control management was changed to count consumed bytes instead of capping by number of elements; this will allow more controls in the normal usage pattern while avoiding the possible memory exhaustion DoS ASoC: - Continued refactoring and cleanups in ASoC core and generic card drivers - Wide range of small cppcheck and warning fixes - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715 USB-audio: - Continued improvements and fixes of the implicit feedback mode, including better support for Pioneer and Roland/BOSS devices HD-audio: - Default back to non-buffer preallocation on x86 - Cirrus codec improvements, more quirks for Realtek codecs Others: - New virtio sound driver - FireWire Bebob updates" * tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits) ALSA: hda/conexant: Re-order CX5066 quirk table entries ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices ALSA: hda/realtek: Re-order ALC662 quirk table entries ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries ALSA: hda/realtek: Re-order ALC269 HP quirk table entries ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries ALSA: usb-audio: Remove redundant assignment to len ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx ALSA: virtio: fix kernel-doc ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB ALSA: sb: Fix two use after free in snd_sb_qsound_build ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer ...
2021-04-08Merge tag 'scmi-updates-5.13' of ↵Arnd Bergmann1-13/+20
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI updates for v5.13 The major and big addition this time is to support modularisation of individual SCMI protocols thus enabling to add support for vendors' custom SCMI protocol. This changes the interface provided by the SCMI driver to all the users of SCMI and hence involved changes in various other subsystem SCMI drivers. The change has been split with a bit of transient code to preserve bisectability and avoiding one big patch bomb changing all the users. This also includes SCMI IIO driver(pulled from IIO tree) and support for per-cpu DVFS. * tag 'scmi-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (41 commits) firmware: arm_scmi: Add dynamic scmi devices creation firmware: arm_scmi: Add protocol modularization support firmware: arm_scmi: Rename non devres notify_ops firmware: arm_scmi: Make notify_priv really private firmware: arm_scmi: Cleanup events registration transient code firmware: arm_scmi: Cleanup unused core transfer helper wrappers firmware: arm_scmi: Cleanup legacy protocol init code firmware: arm_scmi: Make references to handle const firmware: arm_scmi: Remove legacy scmi_voltage_ops protocol interface regulator: scmi: Port driver to the new scmi_voltage_proto_ops interface firmware: arm_scmi: Port voltage protocol to new protocols interface firmware: arm_scmi: Port systempower protocol to new protocols interface firmware: arm_scmi: Remove legacy scmi_sensor_ops protocol interface iio/scmi: Port driver to the new scmi_sensor_proto_ops interface hwmon: (scmi) port driver to the new scmi_sensor_proto_ops interface firmware: arm_scmi: Port sensor protocol to new protocols interface firmware: arm_scmi: Remove legacy scmi_reset_ops protocol interface reset: reset-scmi: Port driver to the new scmi_reset_proto_ops interface firmware: arm_scmi: Port reset protocol to new protocols interface firmware: arm_scmi: Remove legacy scmi_clk_ops protocol interface ... Link: https://lore.kernel.org/r/20210331100657.ilu63i4swnr3zp4e@bogus Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'socfpga_update_for_v5.13' of ↵Arnd Bergmann1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/drivers SoCFPGA updates for v5.13 - Patches from Krzysztof Kozlowski the cleans up and consolidate support for SoCFPGA platforms - Rename ARCH_SOCFPGA into ARCH_INTEL_SOCFPGA - Consolidate ARCH_STRATIX10 into ARCH_INTEL_SOCFPGA - Consolidate ARCH_AGILEX into ARCH_INTEL_SOCFPGA - Consolidate ARCH_N5X into ARCH_INTEL_SOCFPGA * tag 'socfpga_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: drop ARCH_SOCFPGA reset: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs i2c: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs dmaengine: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs clk: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs (and compile test) clk: socfpga: allow compile testing of Stratix 10 / Agilex clocks arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA EDAC: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10 clk: socfpga: merge ARCH_SOCFPGA and ARCH_STRATIX10 clk: socfpga: build together Stratix 10, Agilex and N5X clock drivers net: stmmac: merge ARCH_SOCFPGA and ARCH_STRATIX10 mfd: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10 ARM: socfpga: introduce common ARCH_INTEL_SOCFPGA clk: socfpga: allow building N5X clocks with ARCH_N5X Link: https://lore.kernel.org/r/20210330110430.558182-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-30reset: reset-scmi: Port driver to the new scmi_reset_proto_ops interfaceCristian Marussi1-13/+20
Port the scmi reset driver to the new SCMI reset interface based on protocol handles and common devm_get_ops(). Link: https://lore.kernel.org/r/20210316124903.35011-22-cristian.marussi@arm.com Cc: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-03-23reset: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCsKrzysztof Kozlowski1-2/+2
ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the 32-bit ARM drivers to rely on new symbol. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-23arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGAKrzysztof Kozlowski1-1/+1
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From the Linux kernel point of view these are flavors of the same architecture so there is no need for three top-level arm64 architectures. Simplify this by merging all three architectures into ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries. The side effect is that the INTEL_STRATIX10_SERVICE will now be available for both 32-bit and 64-bit Intel SoCFPGA, even though it is used only for 64-bit. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-03-22reset: raspberrypi: Release firmware handle on unbindNicolas Saenz Julienne1-1/+1
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware interface when unbinding the device. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-18reset: Add reset_control_bulk APIPhilipp Zabel1-0/+215
Follow the clock and regulator subsystems' lead and add a bulk API for reset controls. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314154459.15375-5-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds3-0/+142
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-21Merge tag 'arm-drivers-v5.12' of ↵Linus Torvalds4-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: SCMI firmware: - add support for a completion interrupt Reset controllers: - new driver for BCM4908 - new devm_reset_control_get_optional_exclusive_released() function Memory controllers: - Renesas RZ/G2 support - Tegra124 interconnect support - Allow more drivers to be loadable modules TEE/optee firmware: - minor code cleanup The other half of this is SoC specific drivers that do not belong into any other subsystem, most of them living in drivers/soc: - Allwinner/sunxi power management work - Allwinner H616 support - ASpeed AST2600 system identification support - AT91 SAMA7G5 SoC ID driver - AT91 SoC driver cleanups - Broadcom BCM4908 power management bus support - Marvell mbus cleanups - Mediatek MT8167 power domain support - Qualcomm socinfo driver support for PMIC - Qualcomm SoC identification for many more products - TI Keystone driver cleanups for PRUSS and elsewhere" * tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits) soc: aspeed: socinfo: Add new systems soc: aspeed: snoop: Add clock control logic memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE memory: samsung: exynos5422-dmc: Correct function names in kerneldoc memory: ti-emif-pm: Drop of_match_ptr from of_device_id table optee: simplify i2c access drivers: soc: atmel: fix type for same7 tee: optee: remove need_resched() before cond_resched() soc: qcom: ocmem: don't return NULL in of_get_ocmem optee: sync OP-TEE headers tee: optee: fix 'physical' typos drivers: optee: use flexible-array member instead of zero-length array tee: fix some comment typos in header files soc: ti: k3-ringacc: Use of_device_get_match_data() soc: ti: pruss: Refactor the CFG sub-module init soc: mediatek: pm-domains: Don't print an error if child domain is deferred soc: mediatek: pm-domains: Add domain regulator supply dt-bindings: power: Add domain regulator supply soc: mediatek: cmdq: Remove cmdq_pkt_flush() soc: mediatek: pm-domains: Add support for mt8167 ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-16 08:15:48 +0300