summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)AuthorFilesLines
2018-08-17remoteproc/davinci: use the reset frameworkBartosz Golaszewski1-5/+29
Switch to using the reset framework instead of handcoded reset routines we used so far. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-08-13remoteproc/davinci: Mark error recovery as disabledSuman Anna1-0/+3
The Davinci remoteproc driver does not support error recovery at present, so mark the corresponding remoteproc flag appropriately so that the debugfs flag shows the value as 'disabled' by default. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-31remoteproc: st_slim: replace "%p" with "%pK"Loic Pallardy1-1/+2
The format specifier "%p" can leak kernel addresses. Use "%pK" instead. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-31remoteproc: replace "%p" with "%pK"Loic Pallardy3-6/+6
The format specifier "%p" can leak kernel addresses. Use "%pK" instead. This patch proposes changes for remoteproc core only. Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-31remoteproc: qcom: fix Q6V5_WCSS dependenciesArnd Bergmann1-0/+1
A new driver got added that depends on QCOM_SMD and fails to link as built-in with CONFIG_QCOM_SMD=m: drivers/remoteproc/qcom_common.o: In function `smd_subdev_stop': qcom_common.c:(.text+0x674): undefined reference to `qcom_smd_unregister_edge' drivers/remoteproc/qcom_common.o: In function `smd_subdev_start': qcom_common.c:(.text+0x700): undefined reference to `qcom_smd_register_edge' We've fixed the same thing several times before, so use the same dependency here. Fixes: 3a3d4163e0bf ("remoteproc: qcom: Introduce Hexagon V5 based WCSS driver") Acked-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-31remoteproc: Reset table_ptr in rproc_start() failure pathsSuman Anna1-2/+3
Unwind the modified table_ptr and restore it to the local copy upon any subsequent failures in the rproc_start() function. This keeps the function to remain balanced on failures without the need to balance any modified variables elsewhere. While at this, do some minor cleanup of the extra lines between the failure labels as well. Signed-off-by: Suman Anna <s-anna@ti.com> [bjorn: unconditionally set table_ptr to cached_table] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-11remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvoteSibi Sankar1-1/+0
GCC_MSS_AXIS2 clock is used for disabling boot IMEM (a part of AP boot up). With Boot IMEM disable now a part TZ/ATF, AXIS2 clock is no longer required post AP boot up and expected to remain untouched. However if the clock is turned ON after Q6 is brought out of reset and later turned off, it results in modem hang. When Q6 attempts a power collapse the internal handshaking to check if AXIS2 is idle never goes through since it is turned off preventing the RSC from getting triggered, leaving modem in a funky state. Hence removing AXIS2 clk enable/disable from the driver. Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-11remoteproc: qcom q6v5: fix modular buildArnd Bergmann1-0/+9
The new driver only works as built-in code at the moment but fails with a link error when configured as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/remoteproc/qcom_q6v5.o see include/linux/module.h for more information ERROR: "qcom_q6v5_init" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined! ERROR: "qcom_q6v5_wait_for_start" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined! ERROR: "qcom_q6v5_prepare" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined! ERROR: "qcom_q6v5_unprepare" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined! ERROR: "qcom_q6v5_request_stop" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined! ERROR: "qcom_q6v5_init" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_q6v5_wait_for_start" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_q6v5_prepare" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_q6v5_unprepare" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! ERROR: "qcom_q6v5_request_stop" [drivers/remoteproc/qcom_adsp_pil.ko] undefined! This exports the internal symbols as needed and adds the MODULE_LICENSE() and MODULE_DESCRIPTION() tags. I could not figure out the author, so I did not add a MODULE_AUTHOR() tag for now. Fixes: 3b415c8fb263 ("remoteproc: q6v5: Extract common resource handling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-27remoteproc: Introduce prepare and unprepare for subdevicesBjorn Andersson1-3/+53
On rare occasions a subdevice might need to prepare some hardware resources before a remote processor is booted, and clean up some state after it has been shut down. One such example is the IP Accelerator found in various Qualcomm platforms, which is accessed directly from both the modem remoteproc and the application subsystem and requires an intricate lockstep process when bringing the modem up and down. Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [elder@linaro.org: minor description and comment edits] Signed-off-by Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-27remoteproc: rename subdev probe and remove functionsAlex Elder2-12/+12
Rename functions used when subdevices are started and stopped to reflect the new naming scheme. Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26remoteproc: Make client initialize ops in rproc_subdevBjorn Andersson3-20/+21
In preparation of adding the additional prepare and unprepare operations make the client responsible for filling out the function pointers of the rproc_subdev. This makes the arguments to rproc_add_subdev() more manageable, in particular when some of the functions are left out. Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [elder@linaro.org: added comment about assigning function pointers] Signed-off-by Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26remoteproc: Make start and stop in subdev optionalBjorn Andersson1-7/+13
Some subdevices, such as glink ssr only care about the stop operation, so make the operations optional to reduce client code. Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26remoteproc: Rename subdev functions to start/stopBjorn Andersson1-15/+15
"start" and "stop" are more suitable names for how these two operations are used, and they fit better with the upcoming introduction of two additional operations in the struct. Tested-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [elder@linaro.org: minor comment edits] Signed-off-by Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-19remoteproc: qcom: Introduce Hexagon V5 based WCSS driverSricharan R3-0/+617
IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan (Lithium) IP. An mdt type single image format is used for the firmware. So the mdt_load function can be directly used to load the firmware. Also add the relevant resets required for this core. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Sricharan R <sricharan@codeaurora.org> [bjorn: Rewrote as a separate driver, intead of extending q6v5_pil.c] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-19remoteproc: qcom: q6v5-pil: Use common q6v5 helpersBjorn Andersson2-142/+16
Migrate the MSS remoteproc driver to use the newly extracted helper functions. Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-19remoteproc: qcom: adsp: Use common q6v5 helpersBjorn Andersson2-129/+28
Migrate the Hexagon V5 PAS (ADSP) driver to using the newly extracted helper functions. The use of the handover callback does introduce latent disabling of proxy resources. But apart from this there should be no change in functionality. Reviewed-by: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-19remoteproc: q6v5: Extract common resource handlingBjorn Andersson4-0/+295
Shared between all Hexagon V5 based remoteprocs is the handling of the 5 interrupts and the SMP2P stop request, so break this out into a separate function in order to allow these drivers to be cleaned up. Reviewed-by: Rohit kumar <rohitkr@codeaurora.org> Tested-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-15treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAXStefan Agner1-1/+1
With PHYS_ADDR_MAX there is now a type safe variant for all bits set. Make use of it. Patch created using a semantic patch as follows: // <smpl> @@ typedef phys_addr_t; @@ -(phys_addr_t)ULLONG_MAX +PHYS_ADDR_MAX // </smpl> Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-30remoteproc: q6v5: Allow defining GLINK edge for mss remoteprocSibi Sankar1-0/+3
Add GLINK subdevice to allow definition of GLINK edge as a child of modem-pil. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-30remoteproc: q6v5: Add support for mss remoteproc on SDM845Sibi Sankar1-4/+111
From SDM845, the Q6SS reset sequence on software side has been simplified with the introduction of boot FSM which assists in bringing the Q6 out of reset. SDM845 brings a new reset signal ALT_RESET which is a part of the MSS subsystem hence requires reset clks to be enabled before assert/deassert. Use the SoC specific reset helper function to add support for ALT_RESET in SDM845. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-30remoteproc: q6v5: Introduce reset assert/deassert helper functionsSibi Sankar1-3/+13
Adding reset assert/deassert helper functions to handle SoC specific reset sequences. This wil be used by SDM845 to assert and deassert ALT_RESET and MSS_RESET signals. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-22remoteproc: q6v5: Move proxy unvote to handover irq handlerSibi Sankar1-7/+43
Introduce interrupt handler for smp2p ready interrupt to handle start completion. Move the proxy votes for clocks and regulators to the handover interrupt context. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [bjorn: Only proxy unvote if handover irq has not fired] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-22remoteproc: q6v5: Return irq from q6v5_request_irq()Bjorn Andersson1-5/+6
q6v5_request_irq() was supposed to return the irq number, but ret is overwritten by the request_irq(), fix this and return the IRQ on success. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-10remoteproc/davinci: use octal permissions for module_param()Bartosz Golaszewski1-1/+1
Checkpatch recommends to use octal perms instead of S_IRUGO. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-10remoteproc/davinci: prepare and unprepare the clock where neededBartosz Golaszewski1-3/+3
We're currently switching the platform to using the common clock framework. We need to explicitly prepare and unprepare the rproc clock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Suman Anna <s-anna@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-10remoteproc/davinci: add the missing retval check for clk_enable()Bartosz Golaszewski1-1/+7
The davinci platform is being switched to using the common clock framework, where clk_enable() can fail. Add the return value check. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Suman Anna <s-anna@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09Merge tag 'v4.17-rc4' into rproc-nextBjorn Andersson2-2/+4
Pick up fixes from rproc-v4.17-1 Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-26remoteproc: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven1-1/+0
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-26remoteproc: qcom: Fix potential device node leaksTobias Jordan1-0/+2
Add missing of_node_put()s at two places for device nodes returned by of_parse_phandle(). Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-26remoteproc: fix crashed parameter logic on stop callArnaud Pouliquen1-2/+2
Fix rproc_add_subdev parameter name and inverse the crashed logic. Fixes: 880f5b388252 ("remoteproc: Pass type of shutdown to subdev remove") Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-18remoteproc: Prevent incorrect rproc state on xfer mem ownership failureSibi Sankar1-6/+4
Any failure in the secure call for transferring mem ownership of mba region to Q6 would result in reporting that the remoteproc device is running. This is because the previous q6v5_clk_enable would have been a success. Prevent this by updating variable 'ret' accordingly. Cc: stable@vger.kernel.org Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-06remoteproc: fix null pointer dereference on glink only platformsSibi Sankar1-0/+6
Currently calling list_del on smd subdev remove path results in null pointer dereference on glink only platforms. Fix this by adding safety checks in glink/smd subdev remove paths. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27soc: qcom: qmi: add CONFIG_NET dependencyArnd Bergmann1-0/+1
Access to the socket API and the root network namespace is only available when networking is enabled: ERROR: "kernel_sendmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_release" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "sock_create_kern" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_getsockname" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "init_net" [drivers/soc/qcom/qmi_helpers.ko] undefined! ERROR: "kernel_recvmsg" [drivers/soc/qcom/qmi_helpers.ko] undefined! Adding a dependency on CONFIG_NET lets us build it in all randconfig builds. Fixes: 9b8a11e82615 ("soc: qcom: Introduce QMI encoder/decoder") Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-19remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()'Christophe JAILLET1-6/+4
We can return directly at the beginning of the function and save the 'err' label. We can also explicitly return 0 when the probe succeed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-19remoteproc: imx_rproc: Re-use existing error handling path in ↵Christophe JAILLET1-4/+3
'imx_rproc_probe()' Avoid some code ducplication and be more future-proof. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-19remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'Christophe JAILLET1-2/+4
If 'of_device_get_match_data()' fails, we must undo the previous 'rproc_alloc()' call. Fixes: a0ff4aa6f010 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-13remoteproc: qcom: Introduce sysmonBjorn Andersson7-0/+637
The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-13remoteproc: Pass type of shutdown to subdev removeBjorn Andersson2-12/+12
remoteproc instances can be stopped either by invoking shutdown or by an attempt to recover from a crash. For some subdev types it's expected to clean up gracefully during a shutdown, but are unable to do so during a crash - so pass this information to the subdev remove functions. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: qcom: Register segments for core dumpSarangdhar Joshi4-0/+48
Register MDT segments with the remoteproc core dump functionality in order to include them in a core dump, in case of a recovery of the remote processor. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12soc: qcom: mdt-loader: Return relocation baseBjorn Andersson2-2/+5
In order to implement support for grabbing core dumps in remoteproc it's necessary to know the relocated base of the image, as the offsets from the virtual memory base might not be based on the physical address. Return the adjusted physical base address to the caller. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Rename "load_rsc_table" to "parse_fw"Bjorn Andersson2-7/+6
The resource table is just one possible source of information that can be extracted from the firmware file. Generalize this interface to allow drivers to override this with parsers of other types of information. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Add remote processor coredump supportSarangdhar Joshi2-0/+129
As the remoteproc framework restarts the remote processor after a fatal event, it's useful to be able to acquire a coredump of the remote processor's state, for post mortem debugging. This patch introduces a mechanism for extracting the memory contents after the remote has stopped and before the restart sequence has begun in the recovery path. The remoteproc framework builds the core dump in memory and use devcoredump to expose this to user space. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> [bjorn: Use vmalloc instead of composing the ELF on the fly] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Remove null character write of shared memJitendra Sharma3-12/+0
remoteproc is writing '\0' in the shared mem region. This region is shared among multiple clients that are also trying to read. Hence they miss first character. Remove this null character write, as this mem area is supposed to be Read only. Further during every subsystem reboot, this region is initialized with default, hence no need to write this region. Signed-off-by: Jitendra Sharma <shajit@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-05Merge tag 'rproc-v4.16' of git://github.com/andersson/remoteprocLinus Torvalds10-199/+91
Pull remoteproc updates from Bjorn Andersson: "This contains a few bug fixes and a cleanup up of the resource-table handling in the framework, which removes the need for drivers with no resource table to provide a fake one" * tag 'rproc-v4.16' of git://github.com/andersson/remoteproc: remoteproc: Reset table_ptr on stop remoteproc: Drop dangling find_rsc_table dummies remoteproc: Move resource table load logic to find remoteproc: Don't handle empty resource table remoteproc: Merge rproc_ops and rproc_fw_ops remoteproc: Clone rproc_ops in rproc_alloc() remoteproc: Cache resource table size remoteproc: Remove depricated crash completion virtio_remoteproc: correct put_device virtio_device.dev
2018-01-15remoteproc: Reset table_ptr on stopBjorn Andersson1-0/+3
The installed resource table is no longer accessible after stopping the remote, so update table_ptr to point to the local copy. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Drop dangling find_rsc_table dummiesBjorn Andersson6-54/+0
As the core now deals with the lack of a resource table, remove the dangling custom dummy implementations of find_rsc_table from drivers. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Move resource table load logic to findBjorn Andersson3-50/+35
Extend the previous operation of finding the resource table in the ELF with the extra step of populating the rproc struct with a copy and the size. This allows drivers to override the mechanism used for acquiring the resource table, or omit it for firmware that is known not to have a resource table. This leaves the custom, dummy, find_rsc_table implementations found in some drivers dangling. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Don't handle empty resource tableBjorn Andersson1-0/+3
Allow a NULL table_ptr to have the same meaning as a table with 0 entries, allowing a subsequent patch to skip the assignment step. A few other places in the implementation does dereference table_ptr, but they are currently all coming from rproc_handle_resources(). Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Merge rproc_ops and rproc_fw_opsBjorn Andersson7-88/+52
There are currently a few different schemes used for overriding fw_ops or parts of fw_ops. Merge fw_ops into rproc_ops and expose the default ELF-loader symbols so that they can be assigned by the drivers. To keep backwards compatibility with the "default" case, a driver not specifying the "load" operation is assumed to want the full ELF-loader suit of functions. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Clone rproc_ops in rproc_alloc()Bjorn Andersson1-1/+8
In order to allow rproc_alloc() to, in a future patch, update entries in the "ops" struct we need to make a local copy of it. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-07 05:39:33 +0300