summaryrefslogtreecommitdiff
path: root/drivers/regulator/gpio-regulator.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-20regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14Douglas Anderson1-0/+1
Probing of regulators can be a slow operation and can contribute to slower boot times. This is especially true if a regulator is turned on at probe time (with regulator-boot-on or regulator-always-on) and the regulator requires delays (off-on-time, ramp time, etc). While the overall kernel is not ready to switch to async probe by default, as per the discussion on the mailing lists [1] it is believed that the regulator subsystem is in good shape and we can move regulator drivers over wholesale. There is no way to just magically opt in all regulators (regulators are just normal drivers like platform_driver), so we set PROBE_PREFER_ASYNCHRONOUS for all regulators found in 'drivers/regulator' individually. Given the number of drivers touched and the impossibility to test this ahead of time, it wouldn't be shocking at all if this caused a regression for someone. If there is a regression caused by this patch, it's likely to be one of the cases talked about in [1]. As a "quick fix", drivers involved in the regression could be fixed by changing them to PROBE_FORCE_SYNCHRONOUS. That being said, the correct fix would be to directly fix the problem that caused the issue with async probe. The approach here follows a similar approach that was used for the mmc subsystem several years ago [2]. In fact, I ran nearly the same python script to auto-generate the changes. The only thing I changed was to search for "i2c_driver", "spmi_driver", and "spi_driver" in addition to "platform_driver". [1] https://lore.kernel.org/r/06db017f-e985-4434-8d1d-02ca2100cca0@sirena.org.uk [2] https://lore.kernel.org/r/20200903232441.2694866-1-dianders@chromium.org/ Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230316125351.1.I2a4677392a38db5758dee0788b2cea5872562a82@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-11regulator: Use of_property_present() for testing DT property presenceRob Herring1-1/+1
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144721.1544756-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-29regulator: gpio: Add input_supply support in gpio_regulator_configJerome Neanne1-0/+15
This is simillar as fixed-regulator. Used to extract regulator parent from the device tree. Without that property used, the parent regulator can be shut down (if not an always on). Thus leading to inappropriate behavior: On am62-SP-SK this fix is required to avoid tps65219 ldo1 (SDMMC rail) to be shut down after boot completion. Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20220929132526.29427-2-jneanne@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-20regulator: gpio: Honor regulator-boot-on propertyChen-Yu Tsai1-0/+7
When requesting the enable GPIO, the driver should do so with the correct output level matching some expected state. This is especially important if the regulator is a critical one, such as a supply for the boot CPU. This is currently done by checking for the enable-at-boot property, but this is not documented in the device tree binding, nor does it match the common regulator properties. Honor the common regulator-boot-on property by checking the boot_on constraint setting within the DT probe path. This is the same as what is done in the fixed regulator driver. Also add a comment stating that the enable-at-boot property should not be used. Fixes: 006694d099e8 ("regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200720132809.26908-1-wens@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16regulator: gpio: Fix trivial spellingKieran Bingham1-1/+1
decriptor -> descriptor. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20200609124610.3445662-17-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-13regulator: gpio: Constify regulator_opsAxel Lin1-2/+2
gpio_regulator_voltage_ops and gpio_regulator_current_ops should never change, make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-13regulator: gpio: Convert to devm_regulator_registerAxel Lin1-14/+4
Use devm_regulator_register to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06regulator: gpio: Simplify probe pathLinus Walleij1-34/+24
Use devm_* managed device resources and create a local struct device *dev variable to simplify the code inside probe(). Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-06regulator: gpio: Convert to use descriptorsLinus Walleij1-94/+56
This converts the GPIO regulator driver to use decriptors only. We have to let go of the array gpio handling: the fetched descriptors are handled individually anyway, and the array retrieveal function does not make it possible to retrieve each GPIO descriptor with unique flags. Instead get them one by one. We request the "enable" GPIO separately as before, and make sure that this line is requested as nonexclusive since enable lines can be shared and the regulator core expects this. Most users of the GPIO regulator are using device tree. There are two boards in the kernel using the gpio regulator from a non-devicetree path: PXA hx4700 and magician. Make sure to switch these over to use descriptors as well. Cc: Philipp Zabel <p.zabel@pengutronix.de> # Magician Cc: Petr Cvek <petr.cvek@tul.cz> # Magician Cc: Robert Jarzmik <robert.jarzmik@free.fr> # PXA Cc: Paul Parsons <lost.distance@yahoo.com> # hx4700 Cc: Kevin Hilman <khilman@baylibre.com> # Meson Cc: Neil Armstrong <narmstrong@baylibre.com> # Meson Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-5/+5
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-20regulator: giving regulator controlling gpios a non-empty label when used ↵Nicholas Lowell1-0/+1
through the devicetree. When the label is empty, it causes missing information and limits diagnostics for instances such as 'cat /sys/kernel/debug/gpio' Setting the label to the regulator supply_name will point to the device using the gpio(s). Signed-off-by: Nicholas Lowell <nlowell@lexmark.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-14regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'Christophe Jaillet1-9/+7
Re-order error handling code and gotos to avoid leaks in error handling paths. Fixes: 9f946099fe19 ("regulator: gpio: fix parsing of gpio list") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11regulator: gpio: properly check return value of of_get_named_gpioJisheng Zhang1-3/+6
The function of_get_named_gpio() could return -ENOENT, -EPROBE_DEFER -EINVAL and so on. Currently, for the optional property "enable-gpio", we only check -EPROBE_DEFER, this is not enough since there may be misconfigured "enable-gpio" in the DTB, of_get_named_gpio() will return -EINVAL in this case, we should return immediately here. And for the optional property "gpios", we didn't check the return value, the driver will continue to the point where gpio_request_array() is called, it doesn't make sense to continue if we got -EPROBE_DEFER or -EINVAL here. This patch tries to address these two issues by properly checking the return value of of_get_named_gpio. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-17regulator: gpio: check return value of of_get_named_gpioMihai Mihalache1-0/+2
At boot time the regulator driver can be initialized before the gpio, in which case the call to of_get_named_gpio will return EPROBE_DEFER. This value is silently passed to regulator_register which will return success, although the gpio is not registered (regulator_ena_gpio_request not called) as the value passed is detected as invalid. The gpio_regulator_probe will therefore succeed win no gpio requested. Signed-off-by: Mihai Mihalache <mihai.d.mihalache@intel.com> Reviewed-by: Hans Holmberg <hans.holmberg@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-20regulator: gpio: don't print error on EPROBE_DEFERRabin Vincent1-2/+4
Don't print out an error with the driver sees EPROBE_DEFER when attempting to get the gpio. These errors are usually transient; the probe will be retried later. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-19regulator: gpio: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-05Merge remote-tracking branches 'regulator/topic/max77686', ↵Mark Brown1-8/+10
'regulator/topic/max77693', 'regulator/topic/max77802', 'regulator/topic/power-off' and 'regulator/topic/rk808' into regulator-next
2014-11-26regulator: of: Add regulator desc param to of_get_regulator_init_data()Javier Martinez Canillas1-8/+10
The of_get_regulator_init_data() function is used to extract the regulator init_data but information on how to extract certain data is defined in the static regulator descriptor (e.g: how to map the hardware operating modes). Add a const struct regulator_desc * parameter to the function signature so the parsing logic could use the information in the struct regulator_desc. of_get_regulator_init_data() relies on of_get_regulation_constraints() to actually extract the init_data so it has to pass the struct regulator_desc but that is modified on a later patch. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21regulator: gpio: fix parsing of gpio listRichard Fitzgerald1-42/+51
The list of gpios is defined as optional but the code was failing to properly handle the case of no gpios, and also failing to check for errors reading the entry from the devicetree. This patch fixes the handling of optional gpios - this is a useful feature enabling the gpio-regulator to be used as a dummy variable voltage regulator without having to assign any real GPIO lines. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-07regulator: gpio: Use gpio_is_validMarkus Pargmann1-1/+1
Use gpio_is_valid instead of an explicit comparison with 0. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-07regulator: Set ena_gpio_initialized in regulator driversMarkus Pargmann1-1/+3
This patch sets ena_gpio_initialized for all drivers which set a ena_gpio from parsed DT properties. Drivers using pdata may get zero initialized pdata and therefore copy a 0 into the regulator_config ena_gpio field. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20regulator: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-02-14regulator: gpio-regulator: fix forgotten gpios-states readingHeiko Stuebner1-9/+13
Commit 934624d6e9f0 ("regulator: gpio-regulator: do not open-code counting and access of dt array elements") forgot to convert the recently added gpios-states property using the same pattern. Convert this instance to use the of-helpers too, resolving the build error. Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12regulator: gpio-regulator: do not open-code counting and access of dt array ↵Heiko Stuebner1-9/+6
elements Open coding the counting of elements in a dt-property is abstracted by the newly introduced of_property_count_uXX_elems functions. Additionally the raw iteration over the states element exposes the endian conversion and dtb-format details, which according to Mark Rutland "would be nice to limit [...] to of_ helper functions". Thus change gpio-regulator to use the helper for element counting and of_property_read_u32_index for retrieval of individual values. This makes it possible to remove the raw access to the states property entirely. Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12regulator: gpio: print warning if gpios <-> gpios-states mismatch on DTKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-04regulator: gpio: add gpios-status for DTKuninori Morimoto1-0/+11
config->gpios[x].flags indicates initial pin status, and it will be used for drvdata->state on gpio_regulator_probe(). But, current of_get_gpio_regulator_config() doesn't care about this flags. This patch adds new gpios-status property in order to care about initial pin status. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03regulator: gpio-regulator: Remove unneeded OOM error messageFabio Estevam1-3/+1
There is no need to print an OOM message after devm_kzalloc, since there is a generic OOM message in place. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23Merge remote-tracking branches 'regulator/topic/db8500', ↵Mark Brown1-8/+9
'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus
2013-12-06regulator: gpio: Warn if an invalid regulator-type is suppliedMark Brown1-0/+3
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-05regulator: gpio: Don't require a regulator-type propertyMark Brown1-8/+6
Since essentially all GPIO controlled regulators are voltage regulators make the regulator-type property optional, defaulting to voltage. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24Merge remote-tracking branch 'regulator/fix/gpio' into regulator-linusMark Brown1-1/+6
2013-11-09regulator: gpio-regulator: Don't oops on missing regulator-type propertyLaurent Pinchart1-1/+6
Catch missing regulator-type property in DT and return an error gracefully instead of deferencing a NULL pointer and crashing. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-04regulator: gpio: Remove redundant breakSachin Kamat1-1/+0
'break' after goto has no effect. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30regulator: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-01-28regulator: gpio-regulator: Staticize of_get_gpio_regulator_config()Axel Lin1-1/+1
of_get_gpio_regulator_config() is only used in gpio-regulator.c, make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-28regulator: gpio-regulator: Use of_gpio_count()Axel Lin1-4/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04Drivers: regulator: remove __dev* attributes.Greg Kroah-Hartman1-1/+1
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-10Merge remote-tracking branch 'regulator/topic/gpio' into regulator-nextMark Brown1-3/+3
2012-12-10regulator: gpio-regulator: gpio_set_value should use cansleepLee Jones1-2/+2
If it's possible for gpio_set_value to sleep, we should be using the *_cansleep call instead. This patch fixes multiple warnings from gpiolib. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10regulator: gpio-regulator: Fix logical error in for() loopLee Jones1-1/+1
The cond-statement of this particular for() loop will always be true as long as at least one voltage-shifting GPIO is present. If it wasn't for the break below, we'd be stuck in a forever loop. This patch inserts the correct cond-statement into the statement. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10Merge remote-tracking branch 'regulator/topic/hotplug' into regulator-nextMark Brown1-3/+3
2012-12-06regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_matchAxel Lin1-1/+3
Use of_match_ptr and add ifdef CONFIG_OF guard for regulator_gpio_of_match. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-14regulator: gpio-regulator: Catch 'no states property' misuseLee Jones1-0/+5
A selection of voltage or current values (AKA states) should always be specified when using a GPIO regulator. If there are no switchable states then the fixed regulators should be used instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13regulator: gpio-regulator: fix can't find regulator node in dtFrank Li1-0/+1
Need initilize of_node in regulator config when register regulator, otherwise regulator driver think it is no-dt device. in regulator_dev_lookup list_for_each_entry(r, &regulator_list, list) if (r->dev.parent && node == r->dev.of_node) return r r->dev.of_noe will be zero if miss config in cfg. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17regulator: gpio-regulator: Allow use of GPIO controlled regulators though DTLee Jones1-0/+94
Here we provide the GPIO Regulator driver with Device Tree capability, so that when a platform is booting with DT instead of platform data we can still make full use of it. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 08:51:55 +0300