summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)AuthorFilesLines
2020-05-29power: supply: sbs-battery: switch to i2c's probe_newSebastian Reichel1-3/+2
sbs-battery does not use the ID parameter, so switch to i2c's probe_new API. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: switch from of_property_* to device_property_*Sebastian Reichel1-7/+7
Switch from DT specific of_property_* API to generic and more modern device_property_* API. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add ability to disable charger broadcastsJean-Francois Dagenais1-0/+29
In certain designs, it is possible to add a battery on a populated i2c bus without an sbs compliant charger. In that case, the battery will unnecessarily and sometimes undesirably master the bus trying to write info in the charger. It is observed in many occasion that these battery "broadcasts" are even corrupting other ongoing master to slave communication. I.e. the multi-master support in the battery is inadequate. Thankfully, the CHARGER_MODE bit allows designers to disable that SBS battery behaviour. This needs to be done once when the battery is first seen on the bus. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> [rebased code] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: fix idle battery statusSebastian Reichel1-3/+3
A battery, that is neither charged, nor discharged is not always Full. If the charger is disabled for other reasons it might simply be idle and should be marked accordingly. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED supportSebastian Reichel1-3/+24
Add support for reporting the SBS battery's condition flag to userspace using the new "Calibration required" health status. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add MANUFACTURE_DATE supportSebastian Reichel1-0/+43
Expose the battery's manufacture date to userspace. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add ↵Sebastian Reichel1-0/+12
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support Expose maximum charge current/voltage information requested by the battery. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY supportSebastian Reichel1-2/+41
This reads the battery chemistry from the battery chip instead of incorrectly hardcoding the type to be Li-Ion. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG supportSebastian Reichel1-3/+9
Expose averaged current information, which is part of the SBS standard and should be supported by all batteries. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add PEC supportSebastian Reichel1-3/+69
SBS batteries optionally have support for PEC. This enables PEC handling based on the implemented SBS version as suggested by the standard. The support for PEC is re-evaluated when the battery is hotplugged into the system, since there might be systems supporting batteries from different SBS generations. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: simplify read_read_string_dataSebastian Reichel1-53/+12
The SBS battery implements SMBus block reads. Currently the driver "emulates" this by doing an I2C byte read for the length followed by an I2C block read. The I2C subsystem actually provides a proper API for doing SMBus block reads, which can and should be used instead. The current implementation does not properly handle packet error checking (PEC). This change requires, that I2C bus drivers support I2C_M_RECV_LEN or directly provide the SMBus API to access device manufacturer and model name. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-29power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN supportSebastian Reichel1-0/+5
Add support for reporting the MaxError register from battery fuel gauges following the smart battery standard. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: sbs-battery: Add TI BQ20Z65 supportSebastian Reichel1-5/+10
Add support for BQ20Z65 manufacturer data to the sbs-battery driver. Implementation has been verified using the public TRM available from [0] and tested using a GE Flex 3S2P battery. [0] http://www.ti.com/lit/pdf/sluu386 Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIREDSebastian Reichel1-0/+1
Some battery fuel gauges know when the battery needs to be recalibrated before providing usable values. This should be reported via the health property. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: core: add manufacture date propertiesSebastian Reichel1-0/+3
Some smart batteries store their manufacture date, which is useful to identify the battery and/or to know about the cell quality. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: core: add capacity error margin propertySebastian Reichel1-0/+1
Add a property for reporting the error margin expected by fuel gauge chips. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: supply: Make bd9995x_chip_reset staticSamuel Zou1-1/+1
Fix the following sparse warning: drivers/power/supply/bd99954-charger.c:1028:6: warning: symbol 'bd9995x_chip_reset' was not declared. The bd9995x_chip_reset() has only one call site within bd99954-charger.c It should be static Fixes: 0902f8366491 ("power: supply: Support ROHM bd99954 charger") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: reset: vexpress: fix build issueAnders Roxell1-1/+1
An allmodconfig kernel makes CONFIG_VEXPRESS_CONFIG a module and CONFIG_POWER_RESET_VEXPRESS builtin. That makes us see this build error: aarch64-linux-gnu-ld: drivers/power/reset/vexpress-poweroff.o: in function `vexpress_reset_probe': ../drivers/power/reset/vexpress-poweroff.c:119: undefined reference to `devm_regmap_init_vexpress_config' ../drivers/power/reset/vexpress-poweroff.c:119:(.text+0x48c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_regmap_init_vexpress_config' make[1]: *** [/srv/src/kernel/next/Makefile:1126: vmlinux] Error 1 Rework so that POWER_RESET_VEXPRESS depends on 'VEXPRESS_CONFIG=y'. Link: https://lore.kernel.org/r/20200527112608.3886105-5-anders.roxell@linaro.org Fixes: d06cfe3f123c ("bus: vexpress-config: Merge vexpress-syscfg into vexpress-config") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28power: vexpress: cleanup: use builtin_platform_driverAnders Roxell1-6/+1
Use the helper macro for builtin drivers taht don't do anything special in driver init. This removes some boilerplate code. Link: https://lore.kernel.org/r/20200527112608.3886105-3-anders.roxell@linaro.org Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28power: vexpress: add suppress_bind_attrs to trueAnders Roxell1-0/+1
Make sure that the POWER_RESET_VEXPRESS driver won't have bind/unbind attributes available via the sysfs, so lets be explicit here and use ".suppress_bind_attrs = true" to prevent userspace from doing something silly. Link: https://lore.kernel.org/r/20200527112608.3886105-2-anders.roxell@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-28power: charger: max14577: Add proper dt-compatible stringsMarek Szyprowski1-0/+10
Add device tree compatible strings and create proper modalias structures to let this driver load automatically if compiled as module, because max14577 MFD driver creates MFD cells with such compatible strings. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-nextSebastian Reichel3-0/+680
This merges the MP2629 battery charge management immutable branch between MFD, IIO and power-supply due for the v5.8 merge window into power-supply for-next branch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-28power: reset: syscon-reboot: Add parental syscon supportSerge Semin1-2/+5
Since normally syscon-reboot block is supposed to be a part of a system controller, lets look for the syscon regmap in a parental DT node if regmap property isn't specified. DT binding from now considers the regmap property as deprecated. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-26Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8', ↵Lee Jones4-1/+681
'ib-mfd-iio-power-5.8' and 'ib-mfd-hwmon-5.8' into ibs-for-mfd-merged
2020-05-26power: supply: Add support for mps mp2629 battery chargerSaravanan Sekar3-0/+680
The mp2629 provides switching-mode battery charge management for single-cell Li-ion or Li-polymer battery. Driver supports the access/control input source and battery charging parameters. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-21rtc: mt6397: Add support for the MediaTek MT6358 RTCRan Bi1-1/+1
This add support for the MediaTek MT6358 RTC. Driver using compatible data to store different RTC_WRTGR address offset. This replace RTC_WRTGR to RTC_WRTGR_MT6323 in mt6323-poweroff driver which only needed by armv7 CPU without ATF. Signed-off-by: Ran Bi <ran.bi@mediatek.com> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-05-12power: supply: bq24190_charger: convert to use i2c_new_client_device()Wolfram Sang1-1/+1
Move away from the deprecated API in this comment. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-11power: bq25890: implement INPUT_CURRENT_LIMIT propertyMichał Mirosław1-0/+11
Report REG00.IINLIM value as INPUT_CURRENT_LIMIT property. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-11power: bq25890: implement PRECHARGE_CURRENT propertyMichał Mirosław1-0/+5
Report configured precharge current. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-11power: bq25890: implement CHARGE_TYPE propertyMichał Mirosław1-0/+13
Report charging type based on recently read state. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-11power: bq25890: update state on property readMichał Mirosław1-0/+4
Edge interrupts from the charger may be lost or stuck in fault mode since probe(). Check if something changed everytime userspace wants some data. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-11power: bq25890: fix ADC mode configurationMichał Mirosław1-5/+26
Datasheet describes two modes for reading ADC measurements: 1. continuous, 1 Hz - enabled and started by CONV_RATE bit 2. one-shot - triggered by CONV_START bit In continuous mode, CONV_START is read-only and signifies an ongoing conversion. Change the code to follow the datasheet and really disable continuous mode for power saving. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: bq25890: use proper CURRENT_NOW property for I_BATMichał Mirosław1-10/+10
Charge Current is more apropriately reflected by CURRENT_NOW property (measured current) than CONSTANT_CURRENT_VOLTAGE (configured CC-phase current limit). Fix the reference and make the sign reflect direction of the current. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: max17040: Correct voltage readingJonathan Bakker1-1/+1
According to the datasheet available at (1), the bottom four bits are always zero and the actual voltage is 1.25x this value in mV. Since the kernel API specifies that voltages should be in uV, it should report 1250x the shifted value. 1) https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: olpc_battery: fix the power supply nameLubomir Rintel1-2/+2
The framework is unhappy about them, because it uses the names in sysfs attributes: power_supply olpc-ac: hwmon: 'olpc-ac' is not a valid name attribute, please fix power_supply olpc-battery: hwmon: 'olpc-battery' is not a valid name attribute, please fix See also commit 648cd48c9e56 ("hwmon: Do not accept invalid name attributes") and commit 74d3b6419772 ("hwmon: Relax name attribute validation for new APIs"). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: smb347-charger: Add delay before getting IRQSTATDavid Heidelberg1-0/+4
This delay-fix is picked up from downstream driver, we measured that 25 - 35 ms delay ensure that we get required data. Tested on SMB347 on Nexus 7 2012. Otherwise IRQSTAT_E fails to provide correct information. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: smb347-charger: IRQSTAT_D is volatileDmitry Osipenko1-0/+1
Fix failure when USB cable is connected: smb347 2-006a: reading IRQSTAT_D failed Fixes: 1502cfe19bac ("smb347-charger: Fix battery status reporting logic for charger faults") Tested-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: KConfig cleanup default nMatti Vaittinen1-2/+0
The "default n" is not needed as it is, well, default. Clean the KConfig by removing "default n". Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: Fix Kconfig help text indentiationMatti Vaittinen1-12/+12
Indent the help text as explained in Documentation/process/coding-style.rst Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: Support ROHM bd99954 chargerMatti Vaittinen4-0/+2227
The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Support ROHM BD99954 Charger IC. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: add battery parametersMatti Vaittinen1-0/+8
Add parsing of new device-tree battery bindings. - trickle-charge-current-microamp - precharge-upper-limit-microvolt - re-charge-voltage-microvolt - over-voltage-threshold-microvolt Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: bd70528: use linear rangesMatti Vaittinen2-89/+56
Change the bd70528 to use common linear_range code instead of implementing a copy of it in this driver. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10Merge tag 'tags/linear-ranges-lib' into psy-nextSebastian Reichel1-5/+5
lib: Add linear ranges helper library and start using it Series extracts a "linear ranges" helper out of the regulator framework. Linear ranges helper is intended to help converting real-world values to register values when conversion is linear. I suspect this is useful also for power subsystem and possibly for clk. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: reset: ltc2952: remove unused variableHongbo Yao1-2/+1
Fix gcc '-Wunused-but-set-variable' warning: drivers/power/reset/ltc2952-poweroff.c:97:16: warning: variable ‘overruns’ set but not used [-Wunused-but-set-variable] unsigned long overruns; Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-10power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()'Christophe JAILLET1-16/+2
In the probe function, in case of error, resources allocated in 'lp8788_setup_adc_channel()' must be released. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function and to axe the 'lp8788_release_adc_channel()' function which is now useless. Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-09power: supply: cw2015: Make some symbols staticChenTao1-2/+2
Fix the following warning: drivers/power/supply/cw2015_battery.c:96:5: warning: 'cw_update_profile' was not declared. Should it be static? drivers/power/supply/cw2015_battery.c:712:1: warning: 'cw_bat_pm_ops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: ChenTao <chentao107@huawei.com> Acked-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-09power: bq25890: unlock on error paths in bq25890_resume()Dan Carpenter1-3/+4
We introduced some new locking here, but need to update the error paths so they unlock before returning. Fixes: 72d9cd9cdc18 ("power: bq25890: protect view of the chip's state") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-08power: supply: bd70528: rename linear_range to avoid collisionMatti Vaittinen1-5/+5
Follow-up patches in this series will add a generic struct linear_range. Rename bd70528 internal struct to avoid collision. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/286b1ae0adc1c08e7b644cbdc1a43eb2e0644647.1588944082.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-07power: supply: core: Add type property to uevent envMathew King1-24/+37
Add POWER_SUPPLY_TYPE to the uevent env for power supply. Type is a property of all power supplies and there is a sysfs entry for it but it is not included in the properties array of the power supply so explicitly add it to the udev env. Signed-off-by: Mathew King <mathewk@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-05-07power: supply: core: Add a macro that maps enum properties to text valuesMathew King1-74/+50
Reduce the number of touch points to add a new enum property to the power_supply class by mapping the array of text values to the device attribute descriptor. A new enum property can now added by creating an array with the text values named POWER_SUPPLY_${PROPNAME}_TEXT and adding POWER_SUPPLY_ENUM_ATTR(${PROPNAME}) to the power_supply_attrs array. Signed-off-by: Mathew King <mathewk@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 02:29:41 +0300