| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run a more or less fresh kernel on it.
Commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") which has
been upstream for a while now confirms this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210122114227.39102-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Recently userspace has started making more use of SW_TABLET_MODE
(when an input-dev reports this).
Specifically recent GNOME3 versions will:
1. When SW_TABLET_MODE is reported and is reporting 0:
1.1 Disable accelerometer-based screen auto-rotation
1.2 Disable automatically showing the on-screen keyboard when a
text-input field is focussed
2. When SW_TABLET_MODE is reported and is reporting 1:
2.1 Ignore input-events from the builtin keyboard and touchpad
(this is for 360° hinges style 2-in-1s where the keyboard and
touchpads are accessible on the back of the tablet when folded
into tablet-mode)
This means that claiming to support SW_TABLET_MODE when it does not
actually work / reports correct values has bad side-effects.
The check in the hp-wmi code which is used to decide if the input-dev
should claim SW_TABLET_MODE support, only checks if the
HPWMI_HARDWARE_QUERY is supported. It does *not* check if the hardware
actually is capable of reporting SW_TABLET_MODE.
This leads to the hp-wmi input-dev claiming SW_TABLET_MODE support,
while in reality it will always report 0 as SW_TABLET_MODE value.
This has been seen on a "HP ENVY x360 Convertible 15-cp0xxx" and
this likely is the case on a whole lot of other HP models.
This problem causes both auto-rotation and on-screen keyboard
support to not work on affected x360 models.
There is no easy fix for this, but since userspace expects
SW_TABLET_MODE reporting to be reliable when advertised it is
better to not claim/report SW_TABLET_MODE support at all, then
to claim to support it while it does not work.
To avoid the mentioned problems, add a new enable_tablet_mode_sw
module-parameter which defaults to false.
Note I've made this an int using the standard -1=auto, 0=off, 1=on
triplett, with the hope that in the future we can come up with a
better way to detect SW_TABLET_MODE support. ATM the default
auto option just does the same as off.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1918255
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210120124941.73409-1-hdegoede@redhat.com
|
|
The VBDL ACPI method enables button/switch reporting through the
intel-vbtn device. In some cases the embedded-controller (EC) might
call Notify() on the intel-vbtn device immediately after the
the VBDL call to make sure that the OS is synced with the EC's
button and switch state.
If we register our notify_handler after evaluating VBDL this means
that we might miss the Notify() calls made by the EC to sync the
state.
E.g. the HP Stream x360 Convertible PC 11 has a VGBS method which
always returns 0, independent of the actual SW_TABLET_MODE state
of the device; and immediately after the VBDL call it calls
Notify(0xCD) or Notify(0xCC) to report the actual state.
Move the evaluation of VBDL to after registering our notify_handler
so that we don't miss any events.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-4-hdegoede@redhat.com
|
|
Some 2-in-1s have a broken VGBS method, so we cannot get an initial
state for the switches from them. Reporting the wrong initial state for
SW_TABLET_MODE causes serious problems (touchpad and/or keyboard events
being ignored by userspace when reporting SW_TABLET_MODE=1), so on these
devices we cannot register an input-dev for the switches at probe time.
We can however register an input-dev for the switches as soon as we
receive the first switches event, because then we will know the state.
Note this mirrors the behavior of recent changs to the intel-hid driver
which also registers a separate switches input-dev on receiving the
first event on machines with a broken VGBS method.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-3-hdegoede@redhat.com
|
|
Create 2 separate input-devs for buttons and switches, this is a
preparation for dynamically registering the switches-input device
for devices which are not on the switches allow-list, but do make
Notify() calls with an event value from the switches sparse-keymap.
This also brings the intel-vbtn driver inline with the intel-hid
driver which is doing the same thing.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-2-hdegoede@redhat.com
|
|
Rework the wakeup path inside notify_handler() to special case the
buttons (KE_KEY) case instead of the switches case.
In case of a button wake event we want to skip reporting this,
mirroring how the drivers/acpi/button.c code skips the reporting
in the wakeup case (suspended flag set) too.
The reason to skip reporting in this case is that some Linux
desktop-environments will immediately resuspend if we report an
evdev event for the power-button press on wakeup.
Before this commit the skipping of the button-press was done
in a round-about way: In case of a wakeup the regular
sparse_keymap_report_event() would always be skipped by
an early return, and then to avoid not reporting switch changes
on wakeup there was a special KE_SW path with a duplicate
sparse_keymap_report_event() call.
This commit refactors the wakeup handling to explicitly skip the
reporting for button wake events, while using the regular
reporting path for non button (switches) wakeup events.
No intentional functional impact.
Cc: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210115161850.117614-1-hdegoede@redhat.com
|
|
Switch the platform code to use x86_id_table and accompanying API
instead of custom comparison against x86 CPU model.
This is one of the last users of custom API for that and following
changes will remove it for the good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since SCU code along with the Intel MID watchdog driver has been refactored
in a way that latter will be probed only after the former has been come
to live, the notification code is bogus and not needed. Remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The ACPI-enabled Intel MID platforms neither have WDAT table nor proper IDs
to instantiate watchdog device. In order to keep them working move the board
code from arch/x86 to drivers/platform/x86.
Note, the complete SFI support is going to be removed, that's why PDx86
has been chosen as a new home for it. This is the only device which needs
additional code so far.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
While the AP was powered off, the EC may have send messages.
If the message is not serviced within 3s, the EC stops sending message.
Unlock the EC by purging stale messages at probe time.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210122054637.1422289-3-gwendal@chromium.org
|
|
Call the same bottom half for all EC protocols (threaded code).
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210122054637.1422289-2-gwendal@chromium.org
|
|
Add cold-ap-off to ChromeOS EC sysfs reboot file option, corresponds to
the EC_REBOOT_COLD_AP_OFF flag, that will reset EC and keep AP off.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201221041231.14516-2-pihsun@chromium.org
|
|
The only usage of these is to print their name in a dev_err-message, and
to pass their address to sysfs_create_group() and sysfs_remove_group(),
both which takes pointers to const. Make them const to allow the compiler
to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210109001748.58036-1-rikard.falkeborn@gmail.com
|
|
After 'platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT'
some of the flags are not quite correct.
LID_CLOSED is used to suspend the device, so it makes sense to ignore that.
BATTERY events are also frequent and causing spurious wakes on elm/hana
mt8173 devices.
Fixes: c214e564acb2 ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.2.I3291bf83e4884c206b097ede34780e014fa3e265@changeid
|
|
The host_event_code enum is 1-based, use EC_HOST_EVENT_MASK not BIT to
generate the intended mask. This patch changes the behaviour of the
mask, a following patch will restore the intended behaviour:
'Add LID and BATTERY to default mask'
Fixes: c214e564acb2 ("platform/chrome: cros_ec_proto: ignore unnecessary wakeups on old ECs")
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201209220306.1.I6133572c0ab3c6b95426f804bac2d3833e24acb1@changeid
|
|
The code does no longer use the ms unit based fields to set the
delays as they are replaced by the jiffies.
Remove them and replace their user to use the jiffies version instead.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Peter Kästle <peter@piie.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201216220337.839878-3-daniel.lezcano@linaro.org
|
|
fan control
This commit enables dual fan control for the new Lenovo P53 and P73
laptop models.
Signed-off-by: Jeannie Stevenson <jeanniestevenson@protonmail.com>
Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The recently added thermal policy support makes a
hp_wmi_perform_query(0x4c, ...) call on older devices which do not
support thermal policies this causes the following warning to be
logged (seen on a HP Stream x360 Convertible PC 11):
[ 26.805305] hp_wmi: query 0x4c returned error 0x3
Error 0x3 is HPWMI_RET_UNKNOWN_COMMAND error. This commit silences
the warning for unknown-command errors, silencing the new warning.
Cc: Elia Devito <eliadevito@gmail.com>
Fixes: 81c93798ef3e ("platform/x86: hp-wmi: add support for thermal policy")
Link: https://lore.kernel.org/r/20210114232744.154886-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
fan control
This commit enables dual fan control for the new Lenovo P53 and P73
laptop models.
Signed-off-by: Jeannie Stevenson <jeanniestevenson@protonmail.com>
Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The recently added thermal policy support makes a
hp_wmi_perform_query(0x4c, ...) call on older devices which do not
support thermal policies this causes the following warning to be
logged (seen on a HP Stream x360 Convertible PC 11):
[ 26.805305] hp_wmi: query 0x4c returned error 0x3
Error 0x3 is HPWMI_RET_UNKNOWN_COMMAND error. This commit silences
the warning for unknown-command errors, silencing the new warning.
Cc: Elia Devito <eliadevito@gmail.com>
Fixes: 81c93798ef3e ("platform/x86: hp-wmi: add support for thermal policy")
Link: https://lore.kernel.org/r/20210114232744.154886-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
THe HP Stream x360 Convertible PC 11 DSDT has the following VGBS function:
Method (VGBS, 0, Serialized)
{
If ((^^PCI0.LPCB.EC0.ROLS == Zero))
{
VBDS = Zero
}
Else
{
VBDS = Zero
}
Return (VBDS) /* \_SB_.VGBI.VBDS */
}
Which is obviously wrong, because it always returns 0 independent of the
2-in-1 being in laptop or tablet mode. This causes the intel-vbtn driver
to initially report SW_TABLET_MODE = 1 to userspace, which is known to
cause problems when the 2-in-1 is actually in laptop mode.
During earlier testing this turned out to not be a problem because the
2-in-1 would do a Notify(..., 0xCC) or Notify(..., 0xCD) soon after
the intel-vbtn driver loaded, correcting the SW_TABLET_MODE state.
Further testing however has shown that this Notify() soon after the
intel-vbtn driver loads, does not always happen. When the Notify
does not happen, then intel-vbtn reports SW_TABLET_MODE = 1 resulting in
a non-working touchpad.
IOW the tablet-mode reporting is not reliable on this device, so it
should be dropped from the allow-list, fixing the touchpad sometimes
not working.
Fixes: 8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting")
Link: https://lore.kernel.org/r/20210114143432.31750-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
THe HP Stream x360 Convertible PC 11 DSDT has the following VGBS function:
Method (VGBS, 0, Serialized)
{
If ((^^PCI0.LPCB.EC0.ROLS == Zero))
{
VBDS = Zero
}
Else
{
VBDS = Zero
}
Return (VBDS) /* \_SB_.VGBI.VBDS */
}
Which is obviously wrong, because it always returns 0 independent of the
2-in-1 being in laptop or tablet mode. This causes the intel-vbtn driver
to initially report SW_TABLET_MODE = 1 to userspace, which is known to
cause problems when the 2-in-1 is actually in laptop mode.
During earlier testing this turned out to not be a problem because the
2-in-1 would do a Notify(..., 0xCC) or Notify(..., 0xCD) soon after
the intel-vbtn driver loaded, correcting the SW_TABLET_MODE state.
Further testing however has shown that this Notify() soon after the
intel-vbtn driver loads, does not always happen. When the Notify
does not happen, then intel-vbtn reports SW_TABLET_MODE = 1 resulting in
a non-working touchpad.
IOW the tablet-mode reporting is not reliable on this device, so it
should be dropped from the allow-list, fixing the touchpad sometimes
not working.
Fixes: 8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting")
Link: https://lore.kernel.org/r/20210114143432.31750-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Both, ssh_rtl_rx_start() and ssh_rtl_tx_start() functions, do not exist
and have been consolidated into ssh_rtl_start(). Nevertheless,
kernel-doc references the former functions. Replace those references
with references to ssh_rtl_start().
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210114150826.19109-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A function has a different name between their prototype
and its kernel-doc markup:
../drivers/platform/surface/aggregator/ssh_request_layer.c:1065: warning: expecting prototype for ssh_rtl_tx_start(). Prototype was for ssh_rtl_start() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/4a6bf33cfbd06654d78294127f2b6d354d073089.1610610937.git.mchehab+huawei@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not
use EC to switch touchpad.
Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Writing VPCCMD_W_TOUCHPAD may cause a spurious key press.
Add has_touchpad_switch to workaround these machines.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # 5.4+
--
v2: Specify touchpad to ELAN0634
v3: Stupid missing ! in v2
v4: Correct acpi_dev_present usage (Hans)
Link: https://lore.kernel.org/r/20210107144438.12605-1-jiaxun.yang@flygoat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
allocation size
CI static analysis complains about the allocation size in payload and
response buffers being unchecked. In general, these allocations should
be safe as the user-input is u16 and thus limited to U16_MAX, which is
only slightly larger than the theoretical maximum imposed by the
underlying SSH protocol.
All bounds on these values required by the underlying protocol are
enforced in ssam_request_sync() (or rather the functions called by it),
thus bounds here are only relevant for allocation.
Add comments explaining that this should be safe.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 178f6ab77e61 ("platform/surface: Add Surface Aggregator user-space interface")
Addresses-Coverity: ("Untrusted allocation size")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210111154851.325404-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When copy_struct_from_user() in ssam_cdev_request() fails, we directly
jump to the 'out' label. In this case, however 'spec' and 'rsp' are not
initialized, but we still access fields of those variables. Fix this by
initializing them at the time of their declaration.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 178f6ab77e61 ("platform/surface: Add Surface Aggregator user-space interface")
Addresses-Coverity: ("Uninitialized pointer read")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210111154851.325404-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then passed as a 64 bit function argument. In the case where
func is 32 or more this can lead to an oveflow. Avoid this by shifting
using the BIT_ULL macro instead.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: fc00bc8ac1da ("platform/surface: Add Surface ACPI Notify driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210111144648.20498-1-colin.king@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not
use EC to switch touchpad.
Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Writing VPCCMD_W_TOUCHPAD may cause a spurious key press.
Add has_touchpad_switch to workaround these machines.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # 5.4+
--
v2: Specify touchpad to ELAN0634
v3: Stupid missing ! in v2
v4: Correct acpi_dev_present usage (Hans)
Link: https://lore.kernel.org/r/20210107144438.12605-1-jiaxun.yang@flygoat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface ACPI Notify (SAN) device provides an ACPI interface to the
Surface Aggregator EC, specifically the Surface Serial Hub interface.
This interface allows EC requests to be made from ACPI code and can
convert a subset of EC events back to ACPI notifications.
Specifically, this interface provides a GenericSerialBus operation
region ACPI code can execute a request by writing the request command
data and payload to this operation region and reading back the
corresponding response via a write-then-read operation. Furthermore,
this interface provides a _DSM method to be called when certain events
from the EC have been received, essentially turning them into ACPI
notifications.
The driver provided in this commit essentially takes care of translating
the request data written to the operation region, executing the request,
waiting for it to finish, and finally writing and translating back the
response (if the request has one). Furthermore, this driver takes care
of enabling the events handled via ACPI _DSM calls. Lastly, this driver
also exposes an interface providing discrete GPU (dGPU) power-on
notifications on the Surface Book 2, which are also received via the
operation region interface (but not handled by the SAN driver directly),
making them accessible to other drivers (such as a dGPU hot-plug driver
that may be added later on).
On 5th and 6th generation Surface devices (Surface Pro 5/2017, Pro 6,
Book 2, Laptop 1 and 2), the SAN interface provides full battery and
thermal subsystem access, as well as other EC based functionality. On
those models, battery and thermal sensor devices are implemented as
standard ACPI devices of that type, however, forward ACPI calls to the
corresponding Surface Aggregator EC request via the SAN interface and
receive corresponding notifications (e.g. battery information change)
from it. This interface is therefore required to provide said
functionality on those devices.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-10-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add a misc-device providing user-space access to the Surface Aggregator
EC, mainly intended for debugging, testing, and reverse-engineering.
This interface gives user-space applications the ability to send
requests to the EC and receive the corresponding responses.
The device-file is managed by a pseudo platform-device and corresponding
driver to avoid dependence on the dedicated bus, allowing it to be
loaded in a minimal configuration.
A python library and scripts to access this device can be found at [1].
[1]: https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-9-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface Aggregator EC provides varying functionality, depending on
the Surface device. To manage this functionality, we use dedicated
client devices for each subsystem or virtual device of the EC. While
some of these clients are described as standard devices in ACPI and the
corresponding client drivers can be implemented as platform drivers in
the kernel (making use of the controller API already present), many
devices, especially on newer Surface models, cannot be found there.
To simplify management of these devices, we introduce a new bus and
client device type for the Surface Aggregator subsystem. The new device
type takes care of managing the controller reference, essentially
guaranteeing its validity for as long as the client device exists, thus
alleviating the need to manually establish device links for that purpose
in the client driver (as has to be done with the platform devices).
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit adds error injection hooks to the Surface Serial Hub
communication protocol implementation, to:
- simulate simple serial transmission errors,
- drop packets, requests, and responses, simulating communication
failures and potentially trigger retransmission timeouts, as well as
- inject invalid data into submitted and received packets.
Together with the trace points introduced in the previous commit, these
facilities are intended to aid in testing, validation, and debugging of
the Surface Aggregator communication layer.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20201221183959.1186143-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add trace points to the Surface Aggregator subsystem core. These trace
points can be used to track packets, requests, and allocations. They are
further intended for debugging and testing/validation, specifically in
combination with the error injection capabilities introduced in the
subsequent commit.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20201221183959.1186143-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Event items are used for completing Surface Aggregator EC events, i.e.
placing event command data and payload on a workqueue for later
processing to avoid doing said processing directly on the receiver
thread. This means that event items are allocated for each incoming
event, regardless of that event being transmitted via sequenced or
unsequenced packets.
On the Surface Book 3 and Surface Laptop 3, touchpad HID input events
(unsequenced), can constitute a larger amount of traffic, and therefore
allocation of event items. This warrants caching event items to reduce
memory fragmentation. The size of the cached objects is specifically
tuned to accommodate keyboard and touchpad input events and their
payloads on those devices. As a result, this effectively also covers
most other event types. In case of a larger event payload, event item
allocation will fall back to kzalloc().
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Surface Serial Hub communication is, in its core, packet based. Each
sequenced packet requires to be acknowledged, via an ACK-type control
packet. In case invalid data has been received by the driver, a NAK-type
(not-acknowledge/negative acknowledge) control packet is sent,
triggering retransmission.
Control packets are therefore a core communication primitive and used
frequently enough (with every sequenced packet transmission sent by the
embedded controller, including events and request responses) that it may
warrant caching their allocations to reduce possible memory
fragmentation.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add Surface System Aggregator Module core and Surface Serial Hub driver,
required for the embedded controller found on Microsoft Surface devices.
The Surface System Aggregator Module (SSAM, SAM or Surface Aggregator)
is an embedded controller (EC) found on 4th and later generation
Microsoft Surface devices, with the exception of the Surface Go series.
This EC provides various functionality, depending on the device in
question. This can include battery status and thermal reporting (5th and
later generations), but also HID keyboard (6th+) and touchpad input
(7th+) on Surface Laptop and Surface Book 3 series devices.
This patch provides the basic necessities for communication with the SAM
EC on 5th and later generation devices. On these devices, the EC
provides an interface that acts as serial device, called the Surface
Serial Hub (SSH). 4th generation devices, on which the EC interface is
provided via an HID-over-I2C device, are not supported by this patch.
Specifically, this patch adds a driver for the SSH device (device HID
MSHW0084 in ACPI), as well as a controller structure and associated API.
This represents the functional core of the Surface Aggregator kernel
subsystem, introduced with this patch, and will be expanded upon in
subsequent commits.
The SSH driver acts as the main attachment point for this subsystem and
sets-up and manages the controller structure. The controller in turn
provides a basic communication interface, allowing to send requests from
host to EC and receiving the corresponding responses, as well as
managing and receiving events, sent from EC to host. It is structured
into multiple layers, with the top layer presenting the API used by
other kernel drivers and the lower layers modeled after the serial
protocol used for communication.
Said other drivers are then responsible for providing the (Surface model
specific) functionality accessible through the EC (e.g. battery status
reporting, thermal information, ...) via said controller structure and
API, and will be added in future commits.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In some corner cases downgrade of the superspeed typec device(e.g. Dell
typec Dock, apple dongle) was seen because before the SOC mux configuration
finishes, EC starts configuring the next mux state.
With this change, once the SOC mux is configured, kernel will send an
acknowledgment to EC via Host command EC_CMD_USB_PD_MUX_ACK [1].
After sending the host event EC will wait for the acknowledgment from
kernel before starting the PD negotiation for the next mux state. This
helps to have a framework to build better error handling along with the
synchronization of timing sensitive mux states.
This change also brings in corresponding EC header updates from the EC code
base [1].
[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.h
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-3-utkarsh.h.patel@intel.com
|
|
cros_typec_cmds_supported() is currently being used to check only one
feature flag.
Add a new feature parameter to it so that it can be used to check
multiple feature flags supported in cros_ec.
Rename cros_typec_cmds_supported() to cros_typec_feature_supported().
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-2-utkarsh.h.patel@intel.com
|
|
Modify the altmode registration (and unregistration) code so that it
can be used by both partners and plugs.
Then, add code to register plug altmodes using the newly parameterized
function. Also set the number of alternate modes for the plug using the
associated Type C connector class function
typec_plug_set_num_altmodes().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-12-pmalani@chromium.org
|
|
In order to register cable alternate modes, we need to first register a
plug object. Use the Type C connector class framework to register a SOP'
plug for this purpose.
Since a cable and plug go hand in hand, we can handle the registration
and removal together.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-11-pmalani@chromium.org
|
|
Set the number of altmodes available for a registered partner using the
Type C connector class framework routine.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-10-pmalani@chromium.org
|
|
Use the PD VDO Type C cable plug type macro to retrieve and store the
cable plug type in the cable descriptor.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-9-pmalani@chromium.org
|
|
When the Chrome Embedded Controller notifies the driver that SOP'
discovery is complete, retrieve the PD discovery data and register a
cable object with the Type C connector class framework.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-8-pmalani@chromium.org
|
|
Rename the sop_disc data struct which is used to store PD discovery data
to the more generic name of disc_data. It can then be re-used to store
and process cable discovery data.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-7-pmalani@chromium.org
|
|
Factor out the PD identity parsing code into a separate function. This
way it can be re-used for Cable PD identity parsing in future patches.
No functional changes are introduced by this patch.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-6-pmalani@chromium.org
|
|
Change the disc_done flag, which indicates whether PD discovery is
complete, to sop_disc_done instead, since we will process SOP and SOP'
discovery data separately.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201116201150.2919178-5-pmalani@chromium.org
|
|
lkp reported that CONFIG_DEBUG_FS was not defined because of wrong usage
if macro, correcting it now.
Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20201230081028.2615217-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
