| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
x360 models
Some HP x360 models have an ACPI VGBS method which sets bit 4 instead of
bit 6 when NOT in tablet mode at boot. Inspecting all the DSDTs in my DSDT
collection shows only one other model, the Medion E1239T ever setting bit 4
and it always sets this together with bit 6.
So lets treat bit 4 as a second bit which when set indicates the device not
being in tablet-mode, as we already do for bit 6.
While at it also prefix all VGBS constant defines with "VGBS_".
Note this wrokaround was first added to the kernel as
commit d823346876a9 ("platform/x86: intel-vbtn: Fix SW_TABLET_MODE always
reporting 1 on the HP Pavilion 11 x360").
After commit 8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an
allow-list for SW_TABLET_MODE reporting") got added to the kernel this
was reverted, because with the new allow-list approach the workaround
was no longer necessary for the model on which the issue was first
reported.
But it turns out that the workaround is still necessary because some
affected models report a chassis-type of 31 which is on the allow-list.
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894017
Fixes: 21d64817c724 ("platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360"")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use PCI_VDEVICE and PCI_DEVICE_DATA macros. No functional changes are
expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201204015746.1168941-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The mmio offset range can be different based on the PCI device id. Here
for INTEL_RAPL_PRIO_DEVID_1, the range is increased from 45 to 64. Pass
the range as the driver_data. Also account for different ranges during
save/restore via suspend/resume callbacks.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201204015746.1168941-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The address should be aligned to 4 byte boundary. So send an error for
unaligned address.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201204015746.1168941-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Sending the switch state change twice within the same frame is invalid
evdev protocol and only works if the client handles keys immediately as
well. Processing events immediately is incorrect, it forces a fake
order of events that does not exist on the device.
Recent versions of libinput changed to only process the device state and
SYN_REPORT time, so now the key event is lost.
Same fix as 'commit <bff5bf9db1c94> ("platform/x86: asus-wireless: send
an EV_SYN/SYN_REPORT between state changes")'
Signed-off-by: Daniel Drake <drake@endlessos.org>
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20201207064322.13992-1-chiu@endlessos.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
BIOS sets incorrect value (zero) when SET value passed for integer
attribute with + sign. Added workaround to remove + sign before passing
input to BIOS.
Co-developed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Co-developed-by: Prasanth KSR <prasanth.ksr@dell.com>
Signed-off-by: Prasanth KSR <prasanth.ksr@dell.com>
Signed-off-by: Divya Bharathi <divya.bharathi@dell.com>
Link: https://lore.kernel.org/r/20201202131935.307372-1-divya.bharathi@dell.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The only reference to the mlxplat_mlxcpld_psu[] array got removed,
so there is now a warning from clang:
drivers/platform/x86/mlx-platform.c:322:30: error: variable 'mlxplat_mlxcpld_psu' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static struct i2c_board_info mlxplat_mlxcpld_psu[] = {
Remove the array as well and adapt the ARRAY_SIZE() call
accordingly.
Fixes: 912b341585e3 ("platform/x86: mlx-platform: Remove PSU EEPROM from MSN274x platform configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201203223105.1195709-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix the following sparse warnings:
drivers/platform/x86/uv_sysfs.c:22:13: warning: symbol \
'uv_pcibus_kset' was not declared. Should it be static?
drivers/platform/x86/uv_sysfs.c:23:13: warning: symbol \
'uv_hubs_kset' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lkml.kernel.org/r/1606734713-43919-1-git-send-email-zou_wei@huawei.com
|
|
Return -ENOMEM on allocation failure instead of returning random stack
memory contents.
Fixes: 4fc2cf1f2daf ("x86/platform/uv: Add new uv_sysfs platform driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Justin Ernst <justin.ernst@hpe.com>
Link: https://lkml.kernel.org/r/X8eoN/jMAJb3H3iv@mwanda
|
|
The macro use will already have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201127181024.2771890-1-trix@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix to return the error code -ENODEV when fails to init wmi and
smm.
Fixes: 41e36f2f85af ("platform/x86: dell-smbios: Link all dell-smbios-* modules together")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20201125065032.154125-1-miaoqinglang@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This 2-in-1 model (Product name: Switch SA5-271) features a SW_TABLET_MODE
that works as it would be expected, both when detaching the keyboard and
when folding it behind the tablet body.
It used to work until the introduction of the allow list at
commit 8169bd3e6e193 ("platform/x86: intel-vbtn: Switch to an allow-list
for SW_TABLET_MODE reporting"). Add this model to it, so that the Virtual
Buttons device announces the EV_SW features again.
Fixes: 8169bd3e6e193 ("platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Link: https://lore.kernel.org/r/20201201135727.212917-1-carlosg@gnome.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add touchscreen info for the Irbis TW118 tablet.
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com
|
|
Add touchscreen info for the Predia Basic tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com
|
|
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is
a convertible, while it is actually a convertible. Add it to the
dmi_switches_allow_list.
Signed-off-by: Max Verevkin <me@maxverevkin.tk>
Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The commit 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up
variable declaration") cleans up variable declaration in
video_proc_write(). Seems it does the variable assignment in the
wrong place, this results in dead code and changes the source code
logic. Fix it by doing the assignment at the beginning of the funciton.
Fixes: 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up variable declaration")
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1606024177-16481-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
as KEY_LIGHTS_TOGGLE
Got a dmesg message on my AMD Renoir based Acer laptop:
"acer_wmi: Unknown key number - 0x84" when toggling keyboard
background light
Signed-off-by: Timo Witte <timo.witte@gmail.com>
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Link: https://lore.kernel.org/r/20200804001423.36778-1-timo.witte@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit enables dual fan control for the following new Lenovo
models: P15, P15v.
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Link: https://lore.kernel.org/r/20201126000416.2459645-2-tamiko-ibm-acpi-devel@43-1.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The lid state may change while the machine is suspended. As such, we may
need to re-check the state at wake-up time (at least when waking up from
hibernation).
Add the appropriate call to the resume handler in order to sync the
SW_TABLET_MODE switch state with the hardware state.
Fixes: dda3ec0aa631 ("platform/x86: thinkpad_acpi: Implement tablet mode using GMMS method")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210269
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hnh@hmh.eng.br>
Link: https://lore.kernel.org/r/20201123132157.866303-1-benjamin@sipsolutions.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Yoga 11e 4th gen
The Thinkpad Yoga 11e 4th gen with the N3450 / Celeron CPU only has
one battery which is named BAT1 instead of the expected BAT0, add a
quirk for this. This fixes not being able to set the charging tresholds
on this model; and this alsoe fixes the following errors in dmesg:
ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
thinkpad_acpi: Error probing battery 2
battery: extension failed to load: ThinkPad Battery Extension
battery: extension unregistered: ThinkPad Battery Extension
Note that the added quirk is for the "R0K" BIOS versions which are
used on the Thinkpad Yoga 11e 4th gen's with a Celeron CPU, there
is a separate "R0L" BIOS for the i3/i5 based versions. This may also
need the same quirk, but if that really is necessary is unknown.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201109103550.16265-1-hdegoede@redhat.com
|
|
The Yoga 11e series has 2 accelerometers described by a BOSC0200 ACPI node.
This setup relies on a Windows service which reads both accelerometers and
then calculates the angle between the 2 halves to determine laptop / tent /
tablet mode and then reports the calculated mode back to the EC by calling
special ACPI methods on the BOSC0200 node.
The bmc150 iio driver does not support this (it involves double
calculations requiring sqrt and arccos so this really needs to be done
in userspace), as a result of this on the Yoga 11e the thinkpad_acpi
code always reports SW_TABLET_MODE=0, starting with GNOME 3.38 reporting
SW_TABLET_MODE=0 causes GNOME to:
1. Not show the onscreen keyboard when a text-input field is focussed
with the touchscreen.
2. Disable accelerometer based auto display-rotation.
This makes sense when in laptop-mode but not when in tablet-mode. But
since for the Yoga 11e the thinkpad_acpi code always reports
SW_TABLET_MODE=0, GNOME does not know when the device is in tablet-mode.
Stop reporting the broken (always 0) SW_TABLET_MODE on Yoga 11e models
to fix this.
Note there are plans for userspace to support 360 degree hinges style
2-in-1s with 2 accelerometers and figure out the mode by itself, see:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201106140130.46820-1-hdegoede@redhat.com
|
|
Tested on my P1 gen3, works fine with `thinkfan`. Since thinkpad_acpi fan
control is off by default, it is safe to add 2nd fan control for brave
overclockers
Signed-off-by: Iakov 'Jake' Kirilenko <jake.kirilenko@gmail.com>
Link: https://lore.kernel.org/r/20201105152556.34073-1-jake.kirilenko@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
configuration
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrum and ATOM CPU - system types MSN274x. Till now
all the systems from this class used few types of power units, all
equipped with EEPROM device with address space two bytes. Thus, all
these devices have been handled by EEPROM driver "24c02".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
can be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c02" will not work.
Fixes: ef08e14a3 ("platform/x86: mlx-platform: Add support for new msn274x system type")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201125101056.174708-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
configuration
Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrum and Celeron CPU - system types MSN2700, MSN2100.
Till now all the systems from this class used few types of power units,
all equipped with EEPROM device with address space two bytes. Thus, all
these devices have been handled by EEPROM driver "24c02".
There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
can be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c02" will not work.
Fixes: c6acad68e ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: ba814fdd0 ("platform/x86: mlx-platform: Use defines for bus assignment")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201125101056.174708-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit enables dual fan control for the following new Lenovo
models: P15, P15v.
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Link: https://lore.kernel.org/r/20201126000416.2459645-2-tamiko-ibm-acpi-devel@43-1.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the uv_sysfs driver to construct a read-only sysfs interface at
/sys/firmware/sgi_uv/ to expose information gathered from UV BIOS. This
information includes:
* UV Hub descriptions, including physical location
* Cabling layout between hubs on the fabric
* PCI topology, including physical location of PCI cards
Together, the information provides a robust physical description of a UV
system, useful for correlating to performance data or performing remote
support.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lkml.kernel.org/r/20201125175444.279074-4-justin.ernst@hpe.com
|
|
Add support to thinkpad_acpi for returning the status of the palm
sensor.
This patch builds on the work done previously for the input device
implementation (which was not needed). Both lap and palm sensor are using
sysfs and they are combined into the proxsensor block.
Note: On some platforms, because of an issue in the HW implementation,
the palm sensor presence may be incorrectly advertised as always
enabled even if a palm sensor is not present. The palm sensor is
intended for WWAN transmission power control and should be available
and correct on all WWAN enabled systems. It is not recommended to use
this interface for other use cases.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20201124181154.547518-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
When user presses Fn-F5, the driver automatically changes throttle
thermal policy (or fan boost mode, depending on laptop model).
It would be convenient for userspace software to be able to poll on
corresponding sysfs variable. For example, to show a notification about
mode change.
Note that there is currently no way to handle Fn-F5 from userspace
directly, driver does not pass it.
Signed-off-by: Vasiliy Kupriakov <rublag-ns@yandex.ru>
Link: https://lore.kernel.org/r/20200828214932.20866-2-rublag-ns@yandex.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add touchscreen info for the Irbis TW118 tablet.
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com
|
|
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is
a convertible, while it is actually a convertible. Add it to the
dmi_switches_allow_list.
Signed-off-by: Max Verevkin <me@maxverevkin.tk>
Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The lid state may change while the machine is suspended. As such, we may
need to re-check the state at wake-up time (at least when waking up from
hibernation).
Add the appropriate call to the resume handler in order to sync the
SW_TABLET_MODE switch state with the hardware state.
Fixes: dda3ec0aa631 ("platform/x86: thinkpad_acpi: Implement tablet mode using GMMS method")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210269
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hnh@hmh.eng.br>
Link: https://lore.kernel.org/r/20201123132157.866303-1-benjamin@sipsolutions.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
10E SW3-016
Add the Acer Aspire Switch 10E SW3-016 to the list of models which use the
Acer Switch WMI interface for reporting SW_TABLET_MODE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201123151625.5530-1-hdegoede@redhat.com
|
|
The commit 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up
variable declaration") cleans up variable declaration in
video_proc_write(). Seems it does the variable assignment in the
wrong place, this results in dead code and changes the source code
logic. Fix it by doing the assignment at the beginning of the funciton.
Fixes: 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up variable declaration")
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1606024177-16481-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In addition to a 13" version, there is also a 15" (business) version of
the Surface Laptop 3 based on Intel CPUs. This version also handles
wakeup by lid via (unmarked) GPEs, so add support for it as well.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201113223935.2073847-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The "ns->attr_grp" pointer can be NULL so this error handling code needs
to check for that to avoid an Oops.
Fixes: e2729113ce66 ("platform/x86: Intel PMT class driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20201117072251.GC1111239@mwanda
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
driver data
Use device_get_match_data() to get driver data instead of boilerplate code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201105110530.27888-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201105110530.27888-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The driver depends on ACPI, ACPI_PTR() resolution is always the same.
Otherwise a compiler may produce a warning.
That said, the rule of thumb either ugly ifdeffery with ACPI_PTR or
none should be used in a driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201105110530.27888-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
cable support
Thunderbolt rounded/non-rounded cable support is two bits value. Correcting
it as per the Thunderbolt 3 cable discover mode VDO changes done in the
Thunderbolt 3 alternate mode header.
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
--
Changes in v2:
- Removed the fixes tag as there is no functional implication.
--
Link: https://lore.kernel.org/r/20201113202503.6559-3-utkarsh.h.patel@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the discovery data from the Chrome EC to register parter altmodes
with the Type C Connector Class framework. Also introduce a node
struct to keep track of the list of registered alt modes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201029222738.482366-8-pmalani@chromium.org
|
|
Use EC_CMD_TYPE_DISCOVERY to retrieve and store the discovery data for
the port partner. With that data, update the PD Identity VDO values for
the partner, which were earlier not initialized.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201029222738.482366-7-pmalani@chromium.org
|
|
Make a call to the newly introduced EC_CMD_TYPEC_STATUS command.
Currently we just check to see if the SOP (port-partner) discovery was
done and emit a debug level print for it.
Subsequent patches will retrieve and parse the discovery data and fill
out the Type C connector class data structures.
Also check the EC_FEATURE_TYPEC_CMD feature flag at probe, and only call
the new TYPEC_STATUS command if the feature flag is supported.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-6-pmalani@chromium.org
|
|
The partner identity struct isn't reset when a partner is removed,
meaning a subsequent partner can inherit an old partner's identity VDOs
before discovery is complete. So, clear that struct when a partner
removal is detected.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-4-pmalani@chromium.org
|
|
The cros_unregister_ports() function can be called in situations where
the partner has not been registered yet, and so its related data
structures would not have been initialized. Calling
cros_typec_remove_partner() in such a situation can lead to null pointer
dereferences. So, only call cros_typec_remove_partner() if there is a
valid registered partner pointer.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-3-pmalani@chromium.org
|
|
Move the cros_typec_set_port_params_v0/v1() functions closer to the
place where they are called, cros_typec_port_update().
While we are performing the relocation, also move cros_typec_get_mux_info()
closer to its call-site.
No functional changes are introduced by this commit.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-2-pmalani@chromium.org
|
|
The EC sends an RTC host event when the RTC fires, but we don't need to
treat that as a wakeup event here. The RTC class already properly
handles activating and deactivating a wakeup source in rtc_update_irq()
by calling pm_stay_awake() at the start of processing and pm_relax()
once all expired RTC timers have been processed. This reduces one wakeup
increment but not much else. I noticed this while debugging RTC wakeups
and how they always incremented the wakeup count by two instead of one
because this is duplicated.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: <linux-rtc@vger.kernel.org>
Link: https://lore.kernel.org/r/20201030232523.2654478-1-swboyd@chromium.org
|
|
registers
Panasonic laptops (at least from CF-W4 onwards) have dedicated firmware
registers for saving ac/dc and current brightness. They are a bit confusing
so here's some explanations:
AC_MIN_BRIGHT, AC_MAX_BRIGHT, DC_MIN_BRIGHT, DC_MAX_BRIGHT:
Read-only. Values: 0x01 and 0x15 respectively.
AC_CUR_BRIGHT, DC_CUR_BRIGHT:
Read-Write. 0x00-0xFF. Store user-defined AC/DC brightness. However,
they do not represent current brightness so they should be named AC_BRIGHT
and DC_BRIGHT instead.
CUR_BRIGHT (present since CF-W4):
Read-Write. 0x00-0xFF. It sets the current brightness. It won't update
itself if brightness is changed via other means, e.g. acpi_video0.
Another CUR_BRIGHT (added since CF-W5):
Read-Write. 0x01-0x15. Its value always synchronizes with current
brightness. Not implemented in this version.
Currently the backlight API interacts with AC_CUR_BRIGHT (probably because
it's the only bl register available in earlier models?). This patch adds
sysfs attributes for AC_CUR_BRIGHT, DC_CUR_BRIGHT and CUR_BRIGHT.
It also fixes the error of https://lkml.org/lkml/2020/8/19/1264.
PS: I think the backlight API should interact with CUR_BRIGHT instead of
AC_CUR_BRIGHT. But it involves complications like mapping between 0x01-0x15
or 0x00-0x14 (the backlight API) and 0x00-0xFF (CUR_BRIGHT). I'll leave the
discussion for a later version.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-10-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
(eco mode)
Add battery charging threshold (aka ECO mode) support.
NOTE: The state of ECO mode is persistent until the next POST cycle which
reset it to previous state.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-9-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Sometimes double ACPI events are triggered for brightness, vol and mute
hotkeys. This patch fixes it.
Signed-off-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Link: https://lore.kernel.org/r/20200821181433.17653-8-kenneth.t.chan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
