| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit b20712e853305cbd04673f02b7e52ba5b12c11a9 upstream.
This reverts commit b28ff7a7c3245d7f62acc20f15b4361292fe4117.
The commit introduced P2SB device scan and resource cache during the
boot process to avoid deadlock. But it caused detection failure of
IDE controllers on old systems [1]. The IDE controllers on old systems
and P2SB devices on newer systems have same PCI DEVFN. It is suspected
the confusion between those two is the failure cause. Revert the change
at this moment until the proper solution gets ready.
Link: https://lore.kernel.org/platform-driver-x86/CABq1_vjfyp_B-f4LAL6pg394bP6nDFyvg110TOLHHb0x4aCPeg@mail.gmail.com/T/#m07b30468d9676fc5e3bb2122371121e4559bb383 [1]
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240104114050.3142690-1-shinichiro.kawasaki@wdc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b28ff7a7c3245d7f62acc20f15b4361292fe4117 upstream.
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 70681aa0746ae61d7668b9f651221fad5e30c71e ]
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f9cc5c1f94daa98846b2073733d03ced709704b ]
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c13f365aee68b01e7e68ee293a71fdc7571c111 ]
Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fbcf67ce5a9e2831c14bdfb895be05213e611724 ]
For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.
Fixes: 2bcef4529222 ("platform/x86:intel/pmc: Enable debugfs multiple PMC support")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011650.1973941-1-rajvi.jingar@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ]
LKP found issues with a kernel doc in the driver:
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbf54f37600e874d82886aa3b2f471778cae01ce ]
Some machines like the HP Omen 17 ck2000nf contain WMI blocks
with zero instances, so any WMI driver which tries to handle the
associated WMI device will fail.
Skip such WMI blocks to avoid confusing any WMI drivers.
Reported-by: Alexis Belmonte <alexbelm48@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218188
Fixes: bff431e49ff5 ("ACPI: WMI: Add ACPI-WMI mapping driver")
Tested-by: Alexis Belmonte <alexbelm48@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231129181654.5800-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b52cbca22cbf6c9d2700c1e576d0ddcc670e49d5 ]
asus-nb-wmi calls i8042_install_filter() in some cases, but it never
calls i8042_remove_filter(). This means that a dangling pointer to
the filter function is left after rmmod leading to crashes.
Fix this by moving the i8042-filter installation to the shared
asus-wmi code and also remove it from the shared code on driver unbind.
Fixes: b5643539b825 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7a3c36eef9a5d13b16aa954da54224c9c6bed339 upstream.
max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set,
causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes.
Fixes: ecaa1867b524 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol")
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c6ea14d557343cd3af6c6be2f5a78c98bdb281bb upstream.
amd_pmc_get_dram_size() is used to get the DRAM size information. But
in the current code, mailbox command to get the DRAM size info is sent
based on the values of dev->major and dev->minor.
But dev->major and dev->minor will have either junk or zero assigned to
them until at least once a call to amd_pmc_get_smu_version() is made
which ideally populates dev->major and dev->minor.
However, adding a amd_pmc_get_smu_version() call to
amd_pmc_get_dram_size() has a downside of elevating the boot times.
After talking to the PMFW team, it's understood that the "get dram
size" mbox command would only be supported on specific platforms (like
Mendocino) and not all. So, adjust getting DRAM size behavior such
that,
- if running on Rembrandt or Mendocino and the underlying PMFW knows
how to execute the "get dram size" command it shall give the custom
dram size.
- if the underlying FW does not report the dram size, we just proceed
further and assign the default dram size.
The simplest way to address this is to remove amd_pmc_get_dram_size()
function and directly call the "get dram size" command in the
amd_pmc_s2d_init().
Reported-by: Mark Hasemeyer <markhas@chromium.org>
Fixes: be8325fb3d8c ("platform/x86/amd: pmc: Get STB DRAM size from PMFW")
Cc: stable@vger.kernel.org
Suggested-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231116170121.3372222-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f40f939917b2b4cbf18450096c0ce1c58ed59fae upstream.
'attr_name_kobj' is allocated using kzalloc, but on all the error paths
it is not freed, hence we have a memory leak.
Fix the error path before kobject_init_and_add() by adding kfree().
kobject_put() must be always called after passing the object to
kobject_init_and_add(). Only the error path which is immediately next
to kobject_init_and_add() calls kobject_put() and not any other error
path after it.
Fix the error handling after kobject_init_and_add() by moving the
kobject_put() into the goto label err_other_attr_init that is already
used by all the error paths after kobject_init_and_add().
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org # 6.6.x: c5dbf0416000: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
Cc: stable@vger.kernel.org # 6.6.x: 5736aa9537c9: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ij: Added the stable dep tags]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-3-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5736aa9537c9b8927dec32d3d47c8c31fe560f62 upstream.
attr_name_kobj's memory allocation is done with mutex_lock() held, this
is not needed.
Move allocation outside of mutex_lock() so unlock is not needed when
allocation fails.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5dbf04160005e07e8ca7232a7faa77ab1547ae0 upstream.
All cases in switch-case have a same goto on error, move the return
check out of the switch. This is a cleanup.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 916646758aea81a143ce89103910f715ed923346 ]
Thinkpad X120e also needs this battery quirk.
Signed-off-by: Olli Asikainen <olli.asikainen@gmail.com>
Link: https://lore.kernel.org/r/20231024190922.2742-1-olli.asikainen@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eba9ac7abab91c8f6d351460239108bef5e7a0b6 ]
Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via
file private data"), the miscdevice stores a pointer to itself inside
filp->private_data, which means that private_data will not be NULL when
wmi_char_open() is called. This might cause memory corruption should
wmi_char_open() be unable to find its driver, something which can
happen when the associated WMI device is deleted in wmi_free_devices().
Fix the problem by using the miscdevice pointer to retrieve the WMI
device data associated with a char device using container_of(). This
also avoids wmi_char_open() picking a wrong WMI device bound to a
driver with the same name as the original driver.
Fixes: 44b6b7661132 ("platform/x86: wmi: create userspace interface for drivers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed85891a276edaf7a867de0e9acd0837bc3008f2 ]
When a WMI device besides the first one somehow fails to register,
retval is returned while still containing a negative error code. This
causes the ACPI device fail to probe, leaving behind zombie WMI devices
leading to various errors later.
Handle the single error path separately and return 0 unconditionally
after trying to register all WMI devices to solve the issue. Also
continue to register WMI devices even if some fail to allocate memory.
Fixes: 6ee50aaa9a20 ("platform/x86: wmi: Instantiate all devices before adding them")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
When suspending to idle and resuming on some Lenovo laptops using the
Mendocino APU, multiple NVME IOMMU page faults occur, showing up in
dmesg as repeated errors:
nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b
address=0xb6674000 flags=0x0000]
The system is unstable afterwards.
Applying the s2idle quirk introduced by commit 455cd867b85b ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
allows these systems to work with the IOMMU enabled and s2idle
resume to work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218024
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/ZTlsyOaFucF2pWrL@localhost
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The data in the max brightness port for iMacs with MMIO gmux incorrectly
reports 0x03ff, but it should be 0xffff. As all other MMIO gmux models
have 0xffff, hard code this for all MMIO gmux's so they all have the
proper brightness range accessible.
Fixes: 0c18184de990 ("platform/x86: apple-gmux: support MMIO gmux on T2 Macs")
Reported-by: Karsten Leipold <poldi@dfn.de>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20231017111444.19304-2-orlandoch.dev@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Newer Asus laptops send the following new WMI event codes when some
of the F1 - F12 "media" hotkeys are pressed:
0x2a Screen Capture
0x2b PrintScreen
0x2c CapsLock
Map 0x2a to KEY_SELECTIVE_SCREENSHOT mirroring how similar hotkeys
are mapped on other laptops.
PrintScreem and CapsLock are also reported as normal PS/2 keyboard events,
map these event codes to KE_IGNORE to avoid "Unknown key code 0x%x\n" log
messages.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-4-hdegoede@redhat.com
|
|
backlight control
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
This mapping is really only necessary when asus-wmi has registered
a backlight-device for backlight control. In this case the mapping
was used to decide to filter out the keypresss since in this case
the firmware has already modified the brightness itself and instead
of reporting a keypress asus-wmi will just report the new brightness
value to userspace.
OTOH when the firmware does not adjust the brightness itself then
it seems to always report 0x2e for brightness-down presses and
0x2f for brightness up presses independent of the actual brightness
level. So in this case the mapping of the code is not necessary
and this translation actually leads to spurious brightness-down
presses being send to userspace when pressing printscreen or capslock.
Modify asus_wmi_handle_event_code() to only do the mapping
when using asus-wmi backlight control to fix the spurious
brightness-down presses.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-3-hdegoede@redhat.com
|
|
Older Asus laptops change the backlight level themselves and then send
WMI events with different codes for different backlight levels.
The asus-wmi.c code maps the entire range of codes reported on
brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:
define NOTIFY_BRNUP_MIN 0x11
define NOTIFY_BRNUP_MAX 0x1f
define NOTIFY_BRNDOWN_MIN 0x20
define NOTIFY_BRNDOWN_MAX 0x2e
if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
code = ASUS_WMI_BRN_UP;
else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
code = ASUS_WMI_BRN_DOWN;
Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX
aka 0x20 - 0x2e events were mapped to 0x20.
This mapping is causing issues on new laptop models which actually
send 0x2b events for printscreen presses and 0x2c events for
capslock presses, which get translated into spurious brightness-down
presses.
The plan is disable the 0x11-0x2e special mapping on laptops
where asus-wmi does not register a backlight-device to avoid
the spurious brightness-down keypresses. New laptops always send
0x2e for brightness-down presses, change the special internal
ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in
preparation for fixing the spurious brightness-down presses.
This change does not have any functional impact since all
of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only
then checked against the keymap code and the new 0x2e
value is still in the 0x20 - 0x2e range.
Reported-by: James John <me@donjajo.com>
Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/
Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com
|
|
Fix the charge control address of CONF3 and remove an incorrect firmware
version which turned out to be a BIOS firmware and not an EC firmware.
Fixes: 392cacf2aa10 ("platform/x86: Add new msi-ec driver")
Cc: Aakash Singh <mail@singhaakash.dev>
Cc: Jose Angel Pastrana <japp0005@red.ujaen.es>
Signed-off-by: Nikita Kravets <teackot@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231006175352.1753017-5-teackot@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
frequency
When the current uncore frequency can't be read, don't create attribute
"current_freq_khz" as any read will fail later. Some user space
applications like turbostat fail to continue with the failure. So, check
error during attribute creation.
Fixes: 414eef27283a ("platform/x86/intel/uncore-freq: Display uncore current frequency")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231004181915.1887913-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fixes in the mellanox init branch due for v6.6.
platform-drivers-x86-mellanox-init-v6.6: v6.6-rc1 + fixes in
the platform-drivers-x86-mellanox-init branch to avoid a feature
conflict during the v6.7 merge window.
|
|
flow
Fix missed resource deallocation in rollback flows.
Currently if an error occurs after a successful
mlxplat_i2c_main_init(), mlxplat_i2c_main_exit() call is missed in
rollback flow.
Thus, some resources are not de-allocated.
Move mlxplat_pre_exit() call from mlxplat_remove() into
mlxplat_i2c_main_exit().
Call mlxplat_i2c_main_exit() instead of calling mlxplat_pre_exit() in
mlxplat_probe() error handling flow.
Unregister 'priv->pdev_i2c' device in mlxplat_i2c_main_init() cleanup
flow if this device was successfully registered.
Fixes: 158cd8320776 ("platform: mellanox: Split logic in init and exit flow")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/lkml/70165032-796e-6f5c-6748-f514e3b9d08c@linux.intel.com/T/
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231005075616.42777-2-vadimp@nvidia.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
mismatch warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning:
WARNING: modpost: drivers/platform/x86/hp/hp-wmi: section mismatch in reference: hp_wmi_driver+0x8 (section: .data) -> hp_wmi_bios_remove (section: .exit.text)
Fixes: c165b80cfecc ("hp-wmi: fix handling of platform device")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231004111624.2667753-1-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add information for the Positivo C4128B, a notebook/tablet convertible.
Link: https://github.com/onitake/gsl-firmware/pull/217
Signed-off-by: Renan Guilherme Lebre Ramos <japareaggae@gmail.com>
Link: https://lore.kernel.org/r/20231004235900.426240-1-japareaggae@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add touchscreen info for the BUSH Bush Windows tablet.
It was tested using gslx680_ts_acpi module and on patched kernel
installed on device.
Link: https://github.com/onitake/gsl-firmware/pull/215
Link: https://github.com/systemd/systemd/pull/29268
Signed-off-by: Tomasz Swiatek <swiatektomasz99@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Couple of error paths in do_core_test() was returning directly without
doing a necessary cpus_read_unlock().
Following lockdep warning was observed when exercising these scenarios
with PROVE_RAW_LOCK_NESTING enabled:
[ 139.304775] ================================================
[ 139.311185] WARNING: lock held when returning to user space!
[ 139.317593] 6.6.0-rc2ifs01+ #11 Tainted: G S W I
[ 139.324499] ------------------------------------------------
[ 139.330908] bash/11476 is leaving the kernel with locks still held!
[ 139.338000] 1 lock held by bash/11476:
[ 139.342262] #0: ffffffffaa26c930 (cpu_hotplug_lock){++++}-{0:0}, at:
do_core_test+0x35/0x1c0 [intel_ifs]
Fix the flow so that all scenarios release the lock prior to returning
from the function.
Fixes: 5210fb4e1880 ("platform/x86/intel/ifs: Sysfs interface for Array BIST")
Cc: stable@vger.kernel.org
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20230927184824.2566086-1-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If a duplicate attribute is found using kset_find_obj(), a reference
to that attribute is returned which needs to be disposed accordingly
using kobject_put(). Use kobject_put() to dispose the duplicate
attribute in such a case.
As a side note, a very similar bug was fixed in
commit 7295a996fdab ("platform/x86: dell-sysman: Fix reference leak"),
so it seems that the bug was copied from that driver.
Compile-tested only.
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20230925142819.74525-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If a duplicate attribute is found using kset_find_obj(), a reference
to that attribute is returned which needs to be disposed accordingly
using kobject_put(). Move the setting name validation into a separate
function to allow for this change without having to duplicate the
cleanup code for this setting.
As a side note, a very similar bug was fixed in
commit 7295a996fdab ("platform/x86: dell-sysman: Fix reference leak"),
so it seems that the bug was copied from that driver.
Compile-tested only.
Fixes: 1bcad8e510b2 ("platform/x86: think-lmi: Fix issues with duplicate attributes")
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230925142819.74525-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
hotkey_status_set expects the hotkey_mutex to be held.
It seems like it was missed here and that gives lockdep
warnings while resuming.
Fixes: 38831eaf7d4c ("platform/x86: thinkpad_acpi: use lockdep annotations")
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Link: https://lore.kernel.org/r/20230914130356.235912-1-admin@dennisbonke.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It's possible for interrupts to get significantly delayed to the point
that callers of intel_scu_ipc_dev_command() and friends can call the
function once, hit a timeout, and call it again while the interrupt
still hasn't been processed. This driver will get seriously confused if
the interrupt is finally processed after the second IPC has been sent
with ipc_command(). It won't know which IPC has been completed. This
could be quite disastrous if calling code assumes something has happened
upon return from intel_scu_ipc_dev_simple_command() when it actually
hasn't.
Let's avoid this scenario by simply returning -EBUSY in this case.
Hopefully higher layers will know to back off or fail gracefully when
this happens. It's all highly unlikely anyway, but it's better to be
correct here as we have no way to know which IPC the status register is
telling us about if we send a second IPC while the previous IPC is still
processing.
Cc: Prashant Malani <pmalani@chromium.org>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-5-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
intel_scu_ipc_dev_simple_command()
Andy discovered this bug during patch review. The 'scu' argument to this
function shouldn't be overridden by the function itself. It doesn't make
any sense. Looking at the commit history, we see that commit
f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
removed the setting of the scu to ipcdev in other functions, but not
this one. That was an oversight. Remove this line so that we stop
overriding the scu instance that is used by this function.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/r/ZPjdZ3xNmBEBvNiS@smile.fi.intel.com
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: f57fa18583f5 ("platform/x86: intel_scu_ipc: Introduce new SCU IPC API")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-4-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ipc_wait_for_interrupt()
It's possible for the completion in ipc_wait_for_interrupt() to timeout,
simply because the interrupt was delayed in being processed. A timeout
in itself is not an error. This driver should check the status register
upon a timeout to ensure that scheduling or interrupt processing delays
don't affect the outcome of the IPC return value.
CPU0 SCU
---- ---
ipc_wait_for_interrupt()
wait_for_completion_timeout(&scu->cmd_complete)
[TIMEOUT] status[IPC_STATUS_BUSY]=0
Fix this problem by reading the status bit in all cases, regardless of
the timeout. If the completion times out, we'll assume the problem was
that the IPC_STATUS_BUSY bit was still set, but if the status bit is
cleared in the meantime we know that we hit some scheduling delay and we
should just check the error bit.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: ed12f295bfd5 ("ipc: Added support for IPC interrupt mode")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-3-swboyd@chromium.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
It's possible for the polling loop in busy_loop() to get scheduled away
for a long time.
status = ipc_read_status(scu); // status = IPC_STATUS_BUSY
<long time scheduled away>
if (!(status & IPC_STATUS_BUSY))
If this happens, then the status bit could change while the task is
scheduled away and this function would never read the status again after
timing out. Instead, the function will return -ETIMEDOUT when it's
possible that scheduling didn't work out and the status bit was cleared.
Bit polling code should always check the bit being polled one more time
after the timeout in case this happens.
Fix this by reading the status once more after the while loop breaks.
The readl_poll_timeout() macro implements all of this, and it is
shorter, so use that macro here to consolidate code and fix this.
There were some concerns with using readl_poll_timeout() because it uses
timekeeping, and timekeeping isn't running early on or during the late
stages of system suspend or early stages of system resume, but an audit
of the code concluded that this code isn't called during those times so
it is safe to use the macro.
Cc: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Fixes: e7b7ab3847c9 ("platform/x86: intel_scu_ipc: Sleeping is fine when polling")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230913212723.3055315-2-swboyd@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add quirk for ASUS ROG X16 (GV601V, 2023 versions) Flow 2-in-1
to enable tablet mode with lid flip (all screen rotations).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230905082813.13470-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
|
|
An incorrect if statement was preventing the enablement of the egpu.
Fixes: d49f4d1a30ac ("platform/x86: asus-wmi: don't allow eGPU switching if eGPU not connected")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230830022908.36264-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add dependency on PCI to avoid 'mlx-platform' compilation error in case
CONFIG_PCI is not set.
Failed on i386:
CONFIG_ACPI=y
CONFIG_ISA=y
Error In function 'mlxplat_pci_fpga_device_init':
implicit declaration of function 'pci_request_region':
6204 | err = pci_request_region(pci_dev, 0, res_name);
| ^~~~~~~~~~~~~~~~~~
| pci_request_regions
Fixes: 1316e0af2dc0 ("platform: mellanox: mlx-platform: Introduce ACPI init flow")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230829133748.58208-2-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- AMD IBS improvements
- Intel PMU driver updates
- Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events
- Micro-optimize software events and the ring-buffer code
- Misc cleanups & fixes
* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
perf/x86/intel: Add Crestmont PMU
x86/cpu: Update Hybrids
x86/cpu: Fix Crestmont uarch
x86/cpu: Fix Gracemont uarch
perf: Remove unused extern declaration arch_perf_get_page_size()
perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
perf/mem: Introduce PERF_MEM_LVLNUM_UNC
perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
locking/arch: Avoid variable shadowing in local_try_cmpxchg()
perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
perf/x86: Use local64_try_cmpxchg
perf/amd: Prevent grouping of IBS events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
"The first, cleanup part of the microcode loader reorg tglx has been
working on. The other part wasn't fully ready in time so it will
follow on later.
This part makes the loader core code as it is practically enabled on
pretty much every baremetal machine so there's no need to have the
Kconfig items.
In addition, there are cleanups which prepare for future feature
enablement"
* tag 'x86_microcode_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove remaining references to CONFIG_MICROCODE_AMD
x86/microcode/intel: Remove pointless mutex
x86/microcode/intel: Remove debug code
x86/microcode: Move core specific defines to local header
x86/microcode/intel: Rename get_datasize() since its used externally
x86/microcode: Make reload_early_microcode() static
x86/microcode: Include vendor headers into microcode.h
x86/microcode/intel: Move microcode functions out of cpu/intel.c
x86/microcode: Hide the config knob
x86/mm: Remove unused microcode.h include
x86/microcode: Remove microcode_mutex
x86/microcode/AMD: Rip out static buffers
|
|
ACPI symbol
Newer Lenovo laptops seem to use the KBLC symbol to control the backlight
Add support for handling the keyboard backlight on these devices
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Link: https://lore.kernel.org/r/20230827161940.485200-1-stuart.a.hayhurst@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
on x86_64:
CONFIG_SUSPEND is not set
CONFIG_PM is not set
this leads to build failure of the AMD PMC driver. Add a 'depends on'
in the Kconfig.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/lkml/5181685c-29d8-22a4-a2d7-682f26e2e031@infradead.org/
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230826161213.3180194-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.
This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.
Add the missing cleanup path.
Fixes: 33c9ab5b493a ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The second pull request for v6.6, this time with both stack and driver
changes. Unusually we have only one major new feature but lots of
small cleanup all over, I guess this is due to people have been on
vacation the last month.
Major changes:
rtw89
- Introduce Time Averaged SAR (TAS) support
* tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits)
wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet()
wifi: rtw88: usb: kill and free rx urbs on probe failure
wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar()
wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG
wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips
wifi: rtw89: mac: define register address of rx_filter to generalize code
wifi: rtw89: mac: define internal memory address for WiFi 7 chip
wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory
wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address
wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code
wifi: rtw89: initialize multi-channel handling
wifi: rtw89: provide functions to configure NoA for beacon update
wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif
wifi: rtw89: sar: let caller decide the center frequency to query
wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band()
wifi: rtw89: add function prototype for coex request duration
Fix nomenclature for USB and PCI wireless devices
wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address
wifi: ath12k: Remove unused declarations
wifi: ath12k: add check max message length while scanning with extraie
...
====================
Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A mouse that uses a USB connection is called a "USB mouse" device (or
"USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi
adapter that connects to the host computer via USB is a "USB wireless"
device, not a "wireless USB" device. (The latter term more properly
refers to a defunct Wireless USB specification, which described a
technology for sending USB protocol messages over an ultra wideband
radio link.)
Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a
"PCIe wireless" device, not a "wireless PCIe" device.
Rephrase the text in the kernel source where the word ordering is
wrong.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
|
|
The P2SB is used purely as a library and all users must select it with
depends on PCI
select P2SB if X86
statement. Without this the combination of different configuration
options may lead to build failures.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230822142514.2140897-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
