| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The standard attributes were only introduced after the ones from
thinkpad_acpi in commit 813cab8f3994 ("power: supply: core:
Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties").
The new standard attributes are aliased to their previous names,
preserving backwards compatibility.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
They were never used.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
We need the staging fixes in here, and it resolves a merge issue with an
iio driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: buffer: fix attach/detach pollfunc order
iio: core: remove iio_priv_to_dev() helper
Replace HTTP links with HTTPS ones: drivers/iio
Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
iio: cros_ec_accel_legacy: Add Read Only frequency entries
MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer
iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h
iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections.
iio:adc:ti-adc161s626: Drop of_match_ptr protection.
iio:adc:ti-adc084s021: drop of_match_ptr protection
iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h
iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes
iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections
iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections
iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections
iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include
...
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This reverts commit 5037d4ddda31c2dbbb018109655f61054b1756dc.
Explanation why this does not work:
This change connects the simswap to the LED subsystem of the kernel.
From my point of view, it's nonsense. If we do it this way, then this
can be switched relatively easily via the LED subsystem (trigger:
none/default-on) and that is dangerous! If this is used, it would be
unfavorable, since there is also another trigger (trigger:
heartbeat/netdev).
Therefore, this simswap GPIO should remain in the GPIO
subsystem and be switched via it and not be connected to the LED
subsystem. To avoid the problems mentioned above. The LED subsystem is
not made for this and it is not a good compromise, but rather dangerous.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The battery on my laptop ASUS TUF Gaming FX706II is named BAT1.
This patch allows battery extension to load.
Signed-off-by: Vasiliy Kupriakov <rublag-ns@yandex.ru>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Added new PCI device ids for supporting mailbox and MMIO interface for
Sapphire Rapids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Extend FAN platform data with register presence field.
Add register present entry per rotor (tachometer) description tuple.
The purpose is to allow indication of FAN presence.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add new attributes for the all type systems specifying for each
equipped CPLD device, the CPLD part number and the CPLD minor version
of the device: 'cpld{n}_pn' and 'cpld{n}_version_min'.
This information is to be used for mathcing the current CPLD image and
for making decision if image upgrade is required for CPLD device.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When _BCL invalid, disable thinkpad_acpi backlight brightness control.
brightness_enable is already checked at the beginning.
Most new thinkpads are using GPU driver to control brightness now,
print notice when enabled brightness control even when brightness_enable = 1.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Newer Lenovo Thinkpad platforms have support to identify whether the
system is on-lap or not using an ACPI DYTC event from the firmware.
This patch provides the ability to retrieve the current mode via sysfs
entrypoints and will be used by userspace for thermal mode and WWAN
functionality
Co-developed-by: Nitin Joshi <njoshi1@lenovo.com>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Reviewed-by: Sugumaran <slacshiminar@lenovo.com>
Reviewed-by: Bastien Nocera <bnocera@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
dispatch_proc_write()"
This reverts commit 35d13c7a05126a5a54a1ef40aff4c6984474e604.
This broke procfs interface due to neglecting the fact that
the strings are not coming NULL terminated.
Revert the change till we will have a better clean up.
Fixes: 35d13c7a0512 ("platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
dispatch_proc_write()"
This reverts commit 35d13c7a05126a5a54a1ef40aff4c6984474e604.
This broke procfs interface due to neglecting the fact that
the strings are not coming NULL terminated.
Revert the change till we will have a better clean up.
Fixes: 35d13c7a0512 ("platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add device support for the new ASUS ROG Zephyrus G14 (GA401I) and
G15 (GA502I) series.
This is accomplished by two new quirk entries (one per each series),
as well as all current available G401I/G502I DMI_PRODUCT_NAMEs to match
the corresponding devices.
Signed-off-by: Armas Spann <zappel@retarded.farm>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225fc ("intel-vbtn: new driver for Intel Virtual Button")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b28c ("intel-hid: new hid event driver for hotkeys")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Check bounds before accessing map[] array.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
PMC debug tools use lpm0's 23rd bit to reflect Main PLL, not just
Audio PLL. So, update tgl_lpm0 debug reg bit map name.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Arava Jairaj <jairaj.arava@intel.com>
Acked-by: David E. Box <david.e.box@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The battery on my laptop ASUS TUF Gaming FX706II is named BAT1.
This patch allows battery extension to load.
Signed-off-by: Vasiliy Kupriakov <rublag-ns@yandex.ru>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This keycode is used by Dell as a no-op for keys that should have
no function.
This keycode is never triggered by a keypress in practice, rather
it is included from the 0xB2 DMI table at startup.
This prevents the following messages from being logged at startup on a
Dell Inspiron 5593:
dell_wmi: firmware scancode 0x48 maps to unrecognized keycode 0xffff
dell_wmi: firmware scancode 0x50 maps to unrecognized keycode 0xffff
as per this code comment:
Log if we find an entry in the DMI table that we don't
understand. If this happens, we should figure out what
the entry means and add it to bios_to_linux_keycode.
Signed-off-by: Y Paritcher <y.linux@paritcher.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
|
|
These are events with extended data. The extended data is
currently ignored as userspace does not have a way to deal
it.
Ignore event with a type of 0x0012 and a code of 0xe035, as
the keyboard controller takes care of Fn lock events by itself.
This silences the following messages being logged when
pressing the Fn-lock key on a Dell Inspiron 5593:
dell_wmi: Unknown WMI event type 0x12
dell_wmi: Unknown key with type 0x0012 and code 0xe035 pressed
This is consistent with the behavior for the Fn-lock key
elsewhere in this file.
Signed-off-by: Y Paritcher <y.linux@paritcher.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
|
|
Add events with a type of 0x0010 and a code of 0x57 / 0x58,
this silences the following messages being logged on a
Dell Inspiron 5593:
dell_wmi: Unknown key with type 0x0010 and code 0x0057 pressed
dell_wmi: Unknown key with type 0x0010 and code 0x0058 pressed
These are brightness events and will be handled by acpi-video
Signed-off-by: Y Paritcher <y.linux@paritcher.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Many Bay Trail and Cherry Trail devices come with a camera attached to
Intel's Image Signal Processor. Linux currently does not have a driver for
these, so they do not work as a camera.
Some of these camera's have a status LED which is controlled through a GPIO
in some cases, e.g. on the Asus T100TA and Asus T200TA, there is a firmware
issue where the LED gets turned on at boot.
This commit adds a Linux LED driver for the camera LED on these devices.
This driver will turn the LED off at boot and also allows controlling the
LED (so the user can repurpose it) through the sysfs LED interface.
Which GPIO is attached to the LED is usually not described in the ACPI
tables, so this driver contains per-system info about the GPIO inside the
driver. This means that this driver only works on systems the driver knows
about.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Added new PCI device ids for supporting mailbox and MMIO interface for
Sapphire Rapids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
system76_set() was set as an LED ->brightness_set() callback, but it calls
acpi_evaluate_object() which is not atomic-safe. Switch to the
->brightness_set_blocking() LED callback instead.
Signed-off-by: Nick Shipp <git@segbrk.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
set_mode() is only called when tzd's mode is about to change. Actual
setting is performed in thermal_core, in thermal_zone_device_set_mode().
The meaning of set_mode() callback is actually to notify the driver about
the mode being changed and giving the driver a chance to oppose such
change.
To better reflect the purpose of the method rename it to change_mode()
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-12-andrzej.p@collabora.com
|
|
Setting polling_delay is now done at thermal_core level (by not polling
DISABLED devices), so no need to repeat this code.
int340x: Checking for an impossible enum value is unnecessary.
acpi/thermal: It only prints debug messages.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-11-andrzej.p@collabora.com
|
|
Some thermal zone devices never change their state, so they should be
always enabled.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-9-andrzej.p@collabora.com
|
|
Use thermal_zone_device_{en|dis}able() and thermal_zone_device_is_enabled().
Consequently, all set_mode() implementations in drivers:
- can stop modifying tzd's "mode" member,
- shall stop taking tzd's lock, as it is taken in the helpers
- shall stop calling thermal_zone_device_update() as it is called in the
helpers
- can assume they are called when the mode truly changes, so checks to
verify that can be dropped
Not providing set_mode() by a driver no longer prevents the core from
being able to set tzd's mode, so the relevant check in mode_store() is
removed.
Other comments:
- acpi/thermal.c: tz->thermal_zone->mode will be updated only after we
return from set_mode(), so use function parameter in thermal_set_mode()
instead, no need to call acpi_thermal_check() in set_mode()
- thermal/imx_thermal.c: regmap writes and mode assignment are done in
thermal_zone_device_{en|dis}able() and set_mode() callback
- thermal/intel/intel_quark_dts_thermal.c: soc_dts_{en|dis}able() are a
part of set_mode() callback, so they don't need to modify tzd->mode, and
don't need to fall back to the opposite mode if unsuccessful, as the return
value will be propagated to thermal_zone_device_{en|dis}able() and
ultimately tzd's member will not be changed in thermal_zone_device_set_mode().
- thermal/of-thermal.c: no need to set zone->mode to DISABLED in
of_parse_thermal_zones() as a tzd is kzalloc'ed so mode is DISABLED anyway
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-8-andrzej.p@collabora.com
|
|
get_mode() is now redundant, as the state is stored in struct
thermal_zone_device.
Consequently the "mode" attribute in sysfs can always be visible, because
it is always possible to get the mode from struct tzd.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-6-andrzej.p@collabora.com
|
|
Prepare for eliminating get_mode().
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-5-andrzej.p@collabora.com
|
|
Prepare for storing mode in struct thermal_zone_device.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-3-andrzej.p@collabora.com
|
|
The change passes the parent device to the iio_device_alloc() call. This
also updates the devm_iio_device_alloc() call to consider the device object
as the parent device by default.
Having it passed like this, should ensure that any IIO device object
already has a device object as parent, allowing for neater control, like
passing the 'indio_dev' object for other stuff [like buffers/triggers/etc],
and potentially creating iiom_xxx(indio_dev) functions.
With this patch, only the 'drivers/platform/x86/toshiba_acpi.c' needs an
update to pass the parent object as a parameter.
In the next patch all devm_iio_device_alloc() calls will be handled.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
- ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA,
T200TA
- Big refactoring of Intel SCU driver with Elkhart Lake support has
been added
- Slim Bootloarder firmware update signaling WMI driver has been added
- Thinkpad ACPI driver can handle dual fan configuration on new P and X
models
- Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
- Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet
models
- Intel Speed Select tools update
- Plenty of small cleanups here and there
* tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits)
platform/x86: dcdbas: Check SMBIOS for protected buffer address
platform/x86: asus_wmi: Reserve more space for struct bias_args
platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)
platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry
platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B
platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()
platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns
platform/x86: acerhdf: replace space by * in modalias
platform/x86: ISST: Increase timeout
tools/power/x86/intel-speed-select: Fix invalid core mask
tools/power/x86/intel-speed-select: Increase CPU count
tools/power/x86/intel-speed-select: Fix json perf-profile output output
platform/x86: dell-wmi: Ignore keyboard attached / detached events
platform/x86: dell-laptop: don't register micmute LED if there is no token
platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint()
platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()
platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",")
platform/x86: intel-vbtn: Detect switch position before registering the input-device
...
|
|
Add support for a new method for BIOS to provide the address and length
of the protected SMI communication buffer, via SMBIOS OEM strings.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
On the ASUS laptop UX325JA/UX425JA, most of the media keys are not
working due to the ASUS WMI driver fails to be loaded. The ACPI error
as follows leads to the failure of asus_wmi_evaluate_method.
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IIA3] at bit offset/length 96/32 exceeds size of target Buffer (96 bits) (20200326/dsopcode-203)
No Local Variables are initialized for Method [WMNB]
ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_AML_BUFFER_LIMIT) (20200326/psparse-531)
The DSDT for the WMNB part shows that 5 DWORD required for local
variables and the 3rd variable IIA3 hit the buffer limit.
Method (WMNB, 3, Serialized)
{ ..
CreateDWordField (Arg2, Zero, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
CreateDWordField (Arg2, 0x08, IIA2)
CreateDWordField (Arg2, 0x0C, IIA3)
CreateDWordField (Arg2, 0x10, IIA4)
Local0 = (Arg1 & 0xFFFFFFFF)
If ((Local0 == 0x54494E49))
..
}
The limitation is determined by the input acpi_buffer size passed
to the wmi_evaluate_method. Since the struct bios_args is the data
structure used as input buffer by default for all ASUS WMI calls,
the size needs to be expanded to fix the problem.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
chasis-type
The HP Stream x360 11-p000nd no longer report SW_TABLET_MODE state / events
with recent kernels. This model reports a chassis-type of 10 / "Notebook"
which is not on the recently introduced chassis-type whitelist
Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a chassis-type whitelist and only listed 31 /
"Convertible" as being capable of generating valid SW_TABLET_MOD events.
Commit 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode
switch on "Detachable" and "Portable" chassis-types") extended the
whitelist with chassis-types 8 / "Portable" and 32 / "Detachable".
And now we need to exten the whitelist again with 10 / "Notebook"...
The issue original fixed by the whitelist is really a ACPI DSDT bug on
the Dell XPS 9360 where it has a VGBS which reports it is in tablet mode
even though it is not a 2-in-1 at all, but a regular laptop.
So since this is a workaround for a DSDT issue on that specific model,
instead of extending the whitelist over and over again, lets switch to
a blacklist and only blacklist the chassis-type of the model for which
the chassis-type check was added.
Note this also fixes the current version of the code no longer checking
if dmi_get_system_info(DMI_CHASSIS_TYPE) returns NULL.
Fixes: 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types")
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
HEBC method reports capabilities of 5 button array but HP Spectre X2 (2015)
does not have this control method (the same was for Wacom MobileStudio Pro).
Expand previous DMI quirk by Alex Hung to also enable 5 button array
for this system.
Signed-off-by: Nickolai Kozachenko <daemongloom@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add minimum values for the x and y axis, correct the max value for the
x-axis and add support for the capacitive home-button these tablets have.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add touchscreen info for the Trekstor Yourbook C11B. It seems to
use the same touchscreen as the Primebook C11, so we only add a new DMI
match.
Cc: Otmar Meier <otmarjun.meier@nexgo.de>
Reported-and-tested-by: Otmar Meier <otmarjun.meier@nexgo.de>
Signed-off-by: Bernhard Übelacker <bernhardu@mailbox.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
For hardware blocked wireless switch we check two bits. Introduce
HPWMI_POWER_FW_OR_HW enum to increase readability and for easier
maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
First of all, unsigned long can overflow u32 value on 64-bit machine.
Second, simple_strtoul() doesn't check for overflow in the input.
Convert simple_strtoul() to kstrtou32() to eliminate above issues.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Refactor postcode_store() to follow standard patterns of error handling.
While at it, switch to use kstrtobool().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
