summaryrefslogtreecommitdiff
path: root/drivers/platform/x86/dell
AgeCommit message (Collapse)AuthorFilesLines
2025-06-13Revert "platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware ↵Kurt Borja1-1/+1
m16 R1" This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6. Although the Alienware m16 R1 AMD model supports G-Mode, it actually has a lower power ceiling than plain "performance" profile, which results in lower performance. Reported-by: Cihan Ozakca <cozakca@outlook.com> Cc: stable@vger.kernel.org # 6.15.x Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Bump versionStuart Hayes1-1/+1
Bump the module version. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-6-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Stop overwriting data bufferStuart Hayes1-1/+1
The dell_rbu driver will use memset() to clear the data held by each packet when it is no longer needed (when the driver is unloaded, the packet size is changed, etc). The amount of memory that is cleared (before this patch) is the normal packet size. However, the last packet in the list may be smaller. Fix this to only clear the memory actually used by each packet, to prevent it from writing past the end of data buffer. Because the packet data buffers are allocated with __get_free_pages() (in page-sized increments), this bug could only result in a buffer being overwritten when a packet size larger than one page is used. The only user of the dell_rbu module should be the Dell BIOS update program, which uses a packet size of 4096, so no issues should be seen without the patch, it just blocks the possiblity. Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix list usageStuart Hayes1-2/+2
Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference. Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix lock context warningStuart Hayes1-1/+1
Fix a sparse lock context warning. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-2-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-29Merge tag 'platform-drivers-x86-v6.16-1' of ↵Linus Torvalds4-188/+1225
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Ilpo Järvinen: "The changes are mostly business as usual. Besides pdx86 changes, there are a few power supply changes needed for related pdx86 features, move of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version warning to hid-asus. Highlights: - alienware-wmi-wmax: - Add HWMON support - Add ABI and admin-guide documentation - Expose GPIO debug methods through debug FS - Support manual fan control and "custom" thermal profile - amd/hsmp: - Add sysfs files to show HSMP telemetry - Report power readings and limits via hwmon - amd/isp4: Add AMD ISP platform config for OV05C10 - asus-wmi: - Refactor Ally suspend/resume to work better with older FW - hid-asus: check ROG Ally MCU version and warn about old FW versions - dasharo-acpi: - Add driver for Dasharo devices supporting fans and temperatures monitoring - dell-ddv: - Expose the battery health and manufacture date to userspace using power supply extensions - Implement the battery matching algorithm - dell-pc: - Improve error propagation - Use faux device - int3472: - Add delays to avoid GPIO regulator spikes - Add handshake pin support - Make regulator supply name configurable and allow registering more than 1 GPIO regulator - Map mt9m114 powerdown pin to powerenable - intel/pmc: Add separate SSRAM Telemetry driver - intel-uncore-freq: Add attributes to show agent types and die ID - ISST: - Support SST-TF revision 2 (allows more cores per bucket) - Support SST-PP revision 2 (fabric 1 frequencies) - Remove unnecessary SST MSRs restore (the package retains MSRs despite CPU offlining) - mellanox: Add support for SN2201, SN4280, SN5610, and SN5640 - mellanox: mlxbf-pmc: Support additional PMC blocks - oxpec: - Add OneXFly variants - Add support for charge limit, charge thresholds, and turbo LED - Distinguish current X1 variants to avoid unwanted matching to new variants - Follow hwmon conventions - Move from hwmon/oxp-sensors to platform/x86 to match the enlarged scope - power supply: - Add inhibit-charge-awake (needed by oxpec) - Add additional battery health status values ("blown fuse" and "cell imbalance") (needed by dell-ddv) - powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog - thinkpad-acpi: Support camera shutter switch hotkey - tuxedo: Add virtual LampArray for TUXEDO NB04 devices - tools/power/x86/intel-speed-select: - Support displaying SST-PP revision 2 fields - Skip uncore frequency update on newer generations of CPUs - Miscellaneous cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits) thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m platform/x86: asus-wmi: fix build without CONFIG_SUSPEND docs: ABI: Fix "aassociated" to "associated" platform/x86: Add AMD ISP platform config for OV05C10 Documentation: admin-guide: pm: Add documentation for die_id platform/x86/intel-uncore-freq: Add attributes to show die_id platform/x86/intel: power-domains: Add interface to get Linux die ID Documentation: admin-guide: pm: Add documentation for agent_types platform/x86/intel-uncore-freq: Add attributes to show agent types platform/x86/tuxedo: Prevent invalid Kconfig state platform/x86: dell-ddv: Expose the battery health to userspace platform/x86: dell-ddv: Expose the battery manufacture date to userspace platform/x86: dell-ddv: Implement the battery matching algorithm power: supply: core: Add additional health status values platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry platform/x86/amd/hsmp: Report power via hwmon sensors platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules platform/mellanox: mlxreg-dpu: Fix smatch warnings platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug ...
2025-05-15platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()Vladimir Moskovkin1-1/+1
If the 'buf' array received from the user contains an empty string, the 'length' variable will be zero. Accessing the 'buf' array element with index 'length - 1' will result in a buffer overflow. Add a check for an empty string. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: stable@vger.kernel.org Signed-off-by: Vladimir Moskovkin <Vladimir.Moskovkin@kaspersky.com> Link: https://lore.kernel.org/r/39973642a4f24295b4a8fad9109c5b08@kaspersky.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-12platform/x86: dell-ddv: Expose the battery health to userspaceArmin Wolf1-0/+89
The health of a given battery is exposed over the Dell DDV WMI interface using the "BatteryManufactureAceess" WMI method. The resulting data contains, among other data, the health status of the battery. Expose this value to userspace using the power supply extension interface. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250429003606.303870-4-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-12platform/x86: dell-ddv: Expose the battery manufacture date to userspaceArmin Wolf1-0/+56
The manufacture date of a given battery is exposed over the Dell DDV WMI interface using the "BatteryManufactureDate" WMI method. The resulting data contains the manufacture date of the battery encoded inside a 16-bit value as described in the Smart Battery Data Specification. Expose this value to userspace using the power supply extension interface. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250429003606.303870-3-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-12platform/x86: dell-ddv: Implement the battery matching algorithmArmin Wolf1-13/+88
Since commit db0a507cb24d ("ACPICA: Update integer-to-hex-string conversions") the battery serial number is no longer distorted, allowing us to finally implement the battery matching algorithm. The battery matchign algorithm is necessary when translating between ACPI batteries and the associated indices used by the WMI interface based on the battery serial number. Since this serial number can only be retrieved when the battery is present we cannot perform the initial translation inside dell_wmi_ddv_add_battery() because the ACPI battery might be absent at this point in time. Introduce dell_wmi_ddv_battery_translate() which implements the battery matching algorithm and replaces dell_wmi_ddv_battery_index(). Also implement a translation cache for caching previous translations between ACPI batteries and indices. This is necessary because performing a translation can be very expensive. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250429003606.303870-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-12Merge branch 'fixes' into for-nextIlpo Järvinen1-2/+58
Resolve conflicts in dell/alienware-wmi-wmax and asus-wmi, and enable applying a few amd/hsmp patches that depend on changes in the fixes branch.
2025-05-08platform/x86: alienware-wmi-wmax: Expose GPIO debug methodsKurt Borja1-1/+103
Expose GPIO control methods present on the AWCC interface through DebugFS. These models come with an RGB lighting STM32 MCU, which usually has two GPIO pins with debug capabilities: - Pin 0: Device Firmware Update mode (DFU) - Pin 1: Negative Reset (NRST) Suggested-by: Gabriel Marcano <gabemarcano@yahoo.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250505-awcc-gpio-v4-1-edda44c3a0dc@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-30platform/x86: alienware-wmi-wmax: Fix awcc_hwmon_fans_init() label logicKurt Borja1-7/+6
To avoid passing an uninitialized `temp_id` to awcc_get_fan_label(), pass the `fan_temps` bitmap instead, to work only on set bits. Additionally, awcc_get_fan_label() leaves `dev` unused, so remove it from it's signature and it does not fail, so remove error handling. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202504250521.HEkFK1Jy-lkp@intel.com/ Fixes: d69990783495 ("platform/x86: alienware-wmi-wmax: Add HWMON support") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250425-temp-id-fix-v1-2-372d71f732bf@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-30platform/x86: alienware-wmi-wmax: Fix uninitialized bitmap in ↵Kurt Borja1-2/+2
awcc_hwmon_fans_init() Initialize fan_temps bitmap to zero before using it for the first time in each iteration. Fixes: d69990783495 ("platform/x86: alienware-wmi-wmax: Add HWMON support") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250425-temp-id-fix-v1-1-372d71f732bf@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-24platform: Do not enable by default during compile testingKrzysztof Kozlowski1-1/+1
Enabling the compile test should not cause automatic enabling of all drivers, but only allow to choose to compile them. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250417074648.81528-1-krzysztof.kozlowski@linaro.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-24platform/x86: dell-pc: Transition to faux deviceKurt Borja1-33/+13
Use a faux device parent for registering the platform_profile instead of a "fake" platform device. The faux bus is a minimalistic, single driver bus designed for this purpose. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250411-dell-faux-v1-3-ea1f1c929b7e@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-24platform/x86: dell-pc: Use non-atomic bitmap operationsKurt Borja1-4/+5
The choices bitmap belongs only to this thread, therefore we can use the non-atomic version of set_bit(). Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250411-dell-faux-v1-2-ea1f1c929b7e@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-24platform/x86: dell-pc: Propagate errors when detecting feature supportKurt Borja1-11/+1
The dell-pc module only supports the thermal management Dell SMBIOS feature, therefore it is pointless to have it loaded if this is not available. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250411-dell-faux-v1-1-ea1f1c929b7e@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7Kurt Borja1-0/+8
Extend thermal control support to Alienware m15 R7. Cc: stable@vger.kernel.org Tested-by: Romain THERY <romain.thery@ik.me> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250419-m15-r7-v1-1-18c6eaa27e25@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-17platform/x86: alienware-wmi-wmax: Fix uninitialized variable due to bad ↵Kurt Borja1-4/+2
error handling wmax_thermal_information() may also return -ENOMSG, which would leave `id` uninitialized in thermal_profile_probe. Reorder and modify logic to catch all errors. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/Z_-KVqNbD9ygvE2X@stanley.mountain Fixes: 27e9e6339896 ("platform/x86: alienware-wmi: Refactor thermal control methods") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250416-smatch-fix-v1-1-35491b462d8f@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-15platform/x86: alienware-wmi-wmax: Extend support to more laptopsKurt Borja1-0/+48
Extend thermal control support to: - Alienware Area-51m R2 - Alienware m16 R1 - Alienware m16 R2 - Dell G16 7630 - Dell G5 5505 SE Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250411-awcc-support-v1-2-09a130ec4560@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-15platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1Kurt Borja1-1/+1
Some users report the Alienware m16 R1 models, support G-Mode. This was manually verified by inspecting their ACPI tables. Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Add a DebugFS interfaceKurt Borja1-0/+90
Add a debugfs interface which exposes thermal private data. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-9-a14ea39d8a94@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Add support for manual fan controlKurt Borja1-2/+172
All models with the "AWCC" WMAX device support a way of manually controlling fans. The PWM duty cycle of a fan can't be controlled directly. Instead the AWCC interface let's us tune a fan `boost` value, which has the following empirically discovered, approximate behavior over the PWM value: pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base) Where the pwm_base is the locked PWM value controlled by the FW and fan_boost is a value between 0 and 255. Expose this fan_boost knob as a custom HWMON attribute. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-8-a14ea39d8a94@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Add HWMON supportKurt Borja2-0/+397
All models with the "AWCC" WMAX device support monitoring fan speed and temperature sensors. Expose this feature through the HWMON interface. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-7-a14ea39d8a94@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Add support for the "custom" thermal profileKurt Borja1-4/+19
All models with the "AWCC" WMAX device support a "custom" thermal profile. In some models this profile signals user-space that the user wants to manually control the fans, which are always unlocked. In other models it actually unlocks manual fan control. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-6-a14ea39d8a94@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Improve platform profile probeKurt Borja1-16/+47
Get and store the AWCC system description in alienware_awcc_setup() instead of awcc_platform_profile_probe() and get the correct offset by iterating through each member of the system_description. Then add a debug message for unmatched profiles and replace set_bit() with it's non-atomic version __set_bit() because the choices bitmap only belongs to this thread. In the process also check for a malformed system description by defining an arbitrary limit of resource count. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-5-a14ea39d8a94@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Modify supported_thermal_profiles[]Kurt Borja1-5/+4
Rename supported_thermal_profiles[] -> supported_profiles[] and change it's type to u8 because it stores AWCC thermal IDs. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-4-a14ea39d8a94@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Improve internal AWCC APIKurt Borja1-43/+81
Inline all AWCC WMI helper methods and directly return the newly introduced awcc_wmi_command() helper to simplify implementation. Drop awcc_thermal_control() in favor of awcc_op_activate_profile(). Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new failure code. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-3-a14ea39d8a94@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Improve ID processingKurt Borja1-17/+19
Rename AWCC_SENSOR_ID_MASK to AWCC_SENSOR_ID_FLAG and reorder the ID processing defines in a more logical manner. Then replace their use in bitwise operations with FIELD_GET(). The latter also involves dropping the AWCC_SENSOR_ID_FLAG check inside is_awcc_thermal_mode() in favor of extracting the first byte out of IDs obtained with AWCC_OP_GET_RESOURCE_ID. This is also a requirement to add support for Alienware Aurora desktops. While at it, also rename is_awcc_thermal_mode() to is_awcc_thermal_profile_id(). Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-2-a14ea39d8a94@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-11platform/x86: alienware-wmi-wmax: Rename thermal related symbolsKurt Borja1-86/+87
The "thermal" features of the WMAX WMI device are only present on the host device if the ACPI _UID is "AWCC". Replace WMAX prefixes with "AWCC" to reflect this relationship. Thermal profiles with WMAX_PROFILE_BASIC prefix are also renamed to WMAX_PROFILE_LEGACY because they are only supported in older versions of this WMI device. Finally, shorten enum defines for AWCC operations from WMAX_OPERATION_* to AWCC_OP_*. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250329-hwm-v7-1-a14ea39d8a94@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-07platform/x86: dell-ddv: Use the power supply extension mechanismArmin Wolf1-30/+45
Use the power supply extension mechanism for registering the battery temperature properties so that they can show up in the hwmon device associated with the ACPI battery. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250305053009.378609-4-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-07platform/x86: dell-ddv: Use devm_battery_hook_registerArmin Wolf1-10/+1
Use devm_battery_hook_register() instead of manually calling devm_add_action_or_reset() to simplify the code. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250305053009.378609-3-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-07platform/x86: dell-ddv: Fix temperature calculationArmin Wolf1-2/+4
On the Dell Inspiron 3505 the battery temperature is always 0.1 degrees larger than the temperature show inside the OEM application. Emulate this behaviour to avoid showing strange looking values like 29.1 degrees. Fixes: 0331b1b0ba653 ("platform/x86: dell-ddv: Fix temperature scaling") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250305053009.378609-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-05platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver staticIlpo Järvinen1-1/+1
Sparse reports: dell-uart-backlight.c:328:29: warning: symbol 'dell_uart_bl_serdev_driver' was not declared. Should it be static? Fix it by making the symbol static. Fixes: 484bae9e4d6ac ("platform/x86: Add new Dell UART backlight driver") Reviewed-by: Mario Limonciello <maroi.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250304160639.4295-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-24platform/x86: dell: dell-wmi-sysman: Use *-y instead of *-objs in MakefileKurt Borja1-1/+1
The `objs` suffix is reserved for user-space tools. Use the `y` suffix instead, which is usually used for kernel drivers. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250218194113.26589-2-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-17platform/x86: dell: Use *-y instead of *-objs in MakefileKurt Borja1-3/+3
The `objs` suffix is reserved for user-space tools. Use the `y` suffix instead, which is usually used for kernel drivers. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250214214535.4947-1-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Update header and module informationKurt Borja1-1/+3
Update module header and description. Additionally add myself as a module author. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-15-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: Update alienware-wmi config entriesKurt Borja3-7/+52
Add config entries for each WMI driver managed by the alienware-wmi module to be able to conditionally compile them. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-14-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: dell: Modify Makefile alignmentKurt Borja1-24/+24
Add one more TAB to each line to support upcoming changes. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-13-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: Split the alienware-wmi driverKurt Borja4-839/+865
Split alienware-wmi WMI drivers into different files. This is done seamlessly by copying and pasting, however some blocks are reordered. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-12-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: Add alienware-wmi.hKurt Borja2-78/+114
Add a header file for alienware-wmi with shared resources to support the upcoming file split. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-11-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: Rename alienware-wmi.cKurt Borja2-0/+1
Rename alienware-wmi to support upcoming split. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-10-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Split DMI tableKurt Borja1-188/+175
Split thermal features into a new DMI table to support upcoming file split. While at it: Rename quirk_entry -> alienfx_quirks, Rename quirks -> alienfx and change hdmi_mux, amplifier and deepslp types to bool, because they are already being implicitly used as bools. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-8-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Refactor thermal control methodsKurt Borja1-58/+30
Refactor thermal control methods to use alienware_wmi_command() instead of alienware_wmax_command(). Drop alienware_wmax_command() as there is no more users left. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-7-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Refactor hdmi, amplifier, deepslp methodsKurt Borja1-36/+40
Refactor show/store methods for hdmi, amplifier, deepslp sysfs groups to use alienware_wmi_command() instead of alienware_wmax_command() which uses deprecated WMI methods. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-6-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Refactor LED control methodsKurt Borja1-62/+104
Both WMI devices handled by this module specify a distinct interface for LED control. Previously this module handled this by dynamically adapting arguments passed to wmi_evaluate_method() based on the `interface` global variable. To avoid the use of global variables, and enable the migration to non-deprecated WMI methods, let the WMI drivers define upd_led and upd_brightness operations, which completely replace alienware_update_led() and wmax_brightness(). Also define alienware_wmi_command(), which serves as a wrapper for wmidev_evaluate_method(). This new method is very similar to alienware_wmax_command() but is WMI device agnostic. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-5-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Add a state container for thermal control methodsKurt Borja1-11/+39
Refactor all thermal control methods to use the newly defined awcc_priv state container instead of global variables. While at it, rename create_thermal_profile() to awcc_platform_profile_init() and introduce alienware_awcc_setup() to set up the "AWCC" WMI device driver data. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-4-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Add WMI DriversKurt Borja1-43/+134
Add WMI drivers for LEGACY and WMAX devices. This involves moving the platform device registration to a helper function that is now called from the driver's preferred WMI device driver probe. In the case of the WMAX this is done only if `!quirks->thermal` because the newer WMAX interface doesn't support any of the LED features of this driver. This also eliminates the need to check for `quirks->num_zones > 0` inside alienfx_probe(). Only one WMI driver is registered on module initialization to prevent registering a duplicate platform device. Additionally, create_thermal_profile() now takes wmi_device * instead of platform_device *. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-3-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-02-10platform/x86: alienware-wmi: Add a state container for LED control featureKurt Borja1-57/+68
Add a state container for the "alienware-wmi" platform device and initialize it on the new alienfx_probe(). Migrate all LED control functions to use this state container to support upcoming file split. Additionally move the led_classdev registration to the platform driver probe and make it device managed. Drop alienware_zone_init() and alienware_zone_exit() because they are no longer needed and mimic the `quirks->num_zone > 0` check by failing the platform device probe. Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250207154610.13675-2-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 00:36:39 +0300