summaryrefslogtreecommitdiff
path: root/drivers/platform/x86/amd-pmc.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-11platform/x86: amd-pmc: Add alternative acpi id for PMC controllerSachi King1-0/+1
The Surface Laptop 4 AMD has used the AMD0005 to identify this controller instead of using the appropriate ACPI ID AMDI0005. Include AMD0005 in the acpi id list. Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863 Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by: Sachi King <nakato@nakato.io> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20211002041840.2058647-1-nakato@nakato.io Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-09-14platform/x86: amd-pmc: Increase the response register timeoutMario Limonciello1-1/+1
There have been reports of approximately a 0.9%-1.7% failure rate in SMU communication timeouts with s0i3 entry on some OEM designs. Currently the design in amd-pmc is to try every 100us for up to 20ms. However the GPU driver which also communicates with the SMU using a mailbox register which the driver polls every 1us for up to 2000ms. In the GPU driver this was increased by commit 055162645a40 ("drm/amd/pm: increase time out value when sending msg to SMU") Increase the maximum timeout used by amd-pmc to 2000ms to match this behavior. This has been shown to improve the stability for machines that randomly have failures. Cc: stable@kernel.org Reported-by: Julian Sikorski <belegdol@gmail.com> BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1629 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20210914020115.655-1-mario.limonciello@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-17platform/x86: amd-pmc: Fix undefined reference to __udivdi3Shyam Sundar S K1-1/+2
It was reported that on i386 config ------ on i386: ld: drivers/platform/x86/amd-pmc.o: in function `s0ix_stats_show': amd-pmc.c:(.text+0x100): undefined reference to `__udivdi3' ------- The reason for this is that 64-bit integer division is not supported on 32-bit architecture. Use do_div macro to fix this. Fixes: b9a4fa6978be ("platform/x86: amd-pmc: Add support for logging s0ix counters") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> # and build-tested Link: https://lore.kernel.org/r/20210716153802.2929670-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-15platform/x86: amd-pmc: Fix missing unlock on error in amd_pmc_send_cmd()Yang Yingliang1-1/+1
Add the missing unlock before return from function amd_pmc_send_cmd() in the error handling case. Fixes: 95e1b60f8dc8 ("platform/x86: amd-pmc: Fix command completion code") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210715074327.1966083-1-yangyingliang@huawei.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: Use return code on suspendMario Limonciello1-1/+1
Right now the driver will still return success even if the OS_HINT command failed to send to the SMU. In the rare event of a failure, the suspend should really be aborted here so that relevant logs can may be captured. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20210707141647.8871-1-mario.limonciello@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: Add new acpi id for future PMC controllersShyam Sundar S K1-0/+4
The upcoming PMC controller would have a newer acpi id, add that to the supported acpid device list. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210629084803.248498-8-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: Add support for ACPI ID AMDI0006Shyam Sundar S K1-0/+1
Some newer BIOSes have added another ACPI ID for the uPEP device. SMU statistics behave identically on this device. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210629084803.248498-7-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: Add support for logging s0ix countersShyam Sundar S K1-1/+44
Even the FCH SSC registers provides certain level of information about the s0ix entry and exit times which comes handy when the SMU fails to report the statistics via the mailbox communication. This information is captured via a new debugfs file "s0ix_stats". A non-zero entry in this counters would mean that the system entered the s0ix state. If s0ix entry time and exit time don't change during suspend to idle, the silicon has not entered the deepest state. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210629084803.248498-6-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: Add support for logging SMU metricsShyam Sundar S K1-8/+139
SMU provides a way to dump the s0ix debug statistics in the form of a metrics table via a of set special mailbox commands. Add support to the driver which can send these commands to SMU and expose the information received via debugfs. The information contains the s0ix entry/exit, active time of each IP block etc. As a side note, SMU subsystem logging is not supported on Picasso based SoC's. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210629084803.248498-5-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: call dump registers only onceShyam Sundar S K1-4/+1
Currently amd_pmc_dump_registers() routine is being called at multiple places. The best to call it is after command submission to SMU. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210629084803.248498-4-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: Fix SMU firmware reporting mechanismShyam Sundar S K1-10/+0
It was lately understood that the current mechanism available in the driver to get SMU firmware info works only on internal SMU builds and there is a separate way to get all the SMU logging counters (addressed in the next patch). Hence remove all the smu info shown via debugfs as it is no more useful. Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle") Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210629084803.248498-3-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14platform/x86: amd-pmc: Fix command completion codeShyam Sundar S K1-2/+36
The protocol to submit a job request to SMU is to wait for AMD_PMC_REGISTER_RESPONSE to return 1,meaning SMU is ready to take requests. PMC driver has to make sure that the response code is always AMD_PMC_RESULT_OK before making any command submissions. When we submit a message to SMU, we have to wait until it processes the request. Adding a read_poll_timeout() check as this was missing in the existing code. Also, add a mutex to protect amd_pmc_send_cmd() calls to SMU. Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle") Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210629084803.248498-2-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-02-02platform/x86: amd-pmc: put device on error pathsPan Bian1-3/+11
Put the PCI device rdev on error paths to fix potential reference count leaks. Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121045005.73342-1-bianpan2016@163.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS checkShyam Sundar S K1-1/+1
lkp reported that CONFIG_DEBUG_FS was not defined because of wrong usage if macro, correcting it now. Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20201230081028.2615217-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-11-09platform/x86: amd-pmc: Add AMD platform support for S2IdleShyam Sundar S K1-0/+286
AMD Power Management Controller driver a.k.a. amd-pmc driver is the controller which is meant for the final S2Idle transaction that goes to the PMFW running on the AMD SMU (System Management Unit) responsible for tuning of the VDD. Once all the monitored list or the idle constraints are met, this driver would go and set the OS_HINT (meaning all the devices have reached to their lowest state possible) via the SMU mailboxes. This driver would also provide some debug capabilities via debugfs. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201105140531.2955555-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>