summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2021-06-12pinctrl: mcp23s08: Add optional reset GPIOAndreas Kaessens2-0/+4
The MCP23x port expander RESET# line can be connected to a host GPIO. The optional reset-gpio must be set to LOW if the reset is asserted at probing time. On page 5 in the datasheet [0] the "Device Active After Reset high" time is specified at 0 µs. Therefore no waiting is needed after the reset transition. [0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf Signed-off-by: Andreas Kaessens <akaessens@gmail.com> Signed-off-by: Darian Biastoch <d.biastoch@gmail.com> Link: https://lore.kernel.org/r/20210610132438.3085841-1-akaessens@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09Merge tag 'intel-pinctrl-v5.14-1' of ↵Linus Walleij1-0/+1
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.14-1 * Enabling pin controller on Intel Alder Lake-M The following is an automated git shortlog grouped by driver: tigerlake: - Add Alder Lake-M ACPI ID
2021-06-09pinctrl: mediatek: fix mode encodingMatthias Brugger1-2/+2
Pin modes are encoded in the SoC data structure. Use that value to set IES SMT. Cc: Fabien Parent <fparent@baylibre.com> Cc: Sean Wang <sean.wang@kernel.org> Cc: Mattijs Korpershoek <mkorpershoek@baylibre.com> Cc: linux-mediatek@lists.infradead.org Fixes: 696beef77521 ("pinctrl: mediatek: move bit assignment") Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com> Link: https://lore.kernel.org/r/20210608150656.29007-1-matthias.bgg@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()Zou Wei1-1/+1
Add the missing unlock before return from function mcp23s08_irq() in the error handling case. v1-->v2: remove the "return IRQ_HANDLED" line Fixes: 897120d41e7a ("pinctrl: mcp23s08: fix race condition in irq handler") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1623134048-56051-1-git-send-email-zou_wei@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09pinctrl: qcom: Make it possible to select SC8180x TLMMBjorn Andersson1-1/+1
It's currently not possible to select the SC8180x TLMM driver, due to it selecting PINCTRL_MSM, rather than depending on the same. Fix this. Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210608180702.2064253-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09pinctrl: bcm: Constify static pinmux_opsRikard Falkeborn7-7/+7
These are only assigned, either directly or via the bcm63xx_pinctrl_soc struct, to the pmxops field in the pinctrl_desc struct and never modified, so make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210605185908.39982-3-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09pinctrl: bcm: Constify static pinctrl_opsRikard Falkeborn7-7/+7
These are only assigned, either directly or via the bcm63xx_pinctrl_soc struct, to the pctlops field in the pinctrl_desc struct and never modified, so make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210605185908.39982-2-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' ↵Sergio Paracuellos3-0/+66
file Move all related code for SoC RT288X into a new driver located in 'pinctrl-rt288x.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-7-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' ↵Sergio Paracuellos3-0/+396
file Move all related code for SoC MT7620 into a new driver located in 'pinctrl-mt7620.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-6-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' ↵Sergio Paracuellos3-0/+142
file Move all related code for SoC RT305X into a new driver located in 'pinctrl-rt305x.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-5-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' ↵Sergio Paracuellos3-0/+113
file Move all related code for SoC RT3883 into a new driver located in 'pinctrl-rt3883.c' source file Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-4-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' ↵Sergio Paracuellos3-0/+123
file Move all related code for SoC MT7621 into a new driver located in 'pinctrl-mt7621.c' source file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-3-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: move ralink architecture pinmux header into the driverSergio Paracuellos2-25/+58
Ralink architecture is making use of the header located in 'arch/mips/include/asm/mach-ralink/pinmux.h' to stablish the mechanisms to make derived SoCs to set its pin functions and groups. In order to move all architecture pinmux into a more accurate place which is 'drivers/pinctrl/ralink' we have to first of all move this file also there with a small modification which creates 'rt2880_pinmux_init' function to allow SoCs pinctrl drivers to pass its configuration to the common code located in 'pinctrl-rt2880.c' file. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604115159.8834-2-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabledSergio Paracuellos1-1/+1
In 'rt2880_pmx_group_enable' driver is printing an error and returning -EBUSY if a pin has been already enabled. This begets anoying messages in the caller when this happens like the following: rt2880-pinmux pinctrl: pcie is already enabled mt7621-pci 1e140000.pcie: Error applying setting, reverse things back To avoid this just print the already enabled message in the pinctrl driver and return 0 instead to not confuse the user with a real bad problem. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210604055337.20407-1-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: single: config: enable the pin's inputDario Binacchi1-0/+3
It enables / disables the input buffer. As explained in the description of 'enum pin_config_param' this does not affect the pin's ability to drive output. Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210602150420.18202-1-dariobin@libero.it Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: mtk: Fix mt8365 Kconfig dependencyLinus Walleij1-0/+1
This SoC needs to select PINCTRL_MTK or we can end up in kernel compiles that miss some symbols. Cc: Fabien Parent <fparent@baylibre.com> Reported-by: kernel test robot <lkp@intel.com> Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: mcp23s08: fix race condition in irq handlerRadim Pavlik1-5/+5
Checking value of MCP_INTF in mcp23s08_irq suggests that the handler may be called even when there is no interrupt pending. But the actual interrupt could happened between reading MCP_INTF and MCP_GPIO. In this situation we got nothing from MCP_INTF, but the event gets acknowledged on the expander by reading MCP_GPIO. This leads to losing events. Fix the problem by not reading any register until we see something in MCP_INTF. The error was reproduced and fix tested on MCP23017. Signed-off-by: Radim Pavlik <radim.pavlik@tbs-biometrics.com> Link: https://lore.kernel.org/r/AM7PR06MB6769E1183F68DEBB252F665ABA3E9@AM7PR06MB6769.eurprd06.prod.outlook.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: qcom: Fix duplication in gpio_groupsManivannan Sadhasivam1-9/+9
"gpio52" and "gpio53" are duplicated in gpio_groups, fix them! Fixes: ac43c44a7a37 ("pinctrl: qcom: Add SDX55 pincontrol driver") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210526082857.174682-1-manivannan.sadhasivam@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-31pinctrl: renesas: r8a77980: Add bias pinconf supportGeert Uytterhoeven1-6/+203
Implement support for pull-up and pull-down handling for the R-Car V3H SoC, using the common R-Car bias handling. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/448f47ccd89d9bc8621c7fda8c81508deb05cb82.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a77970: Add bias pinconf supportGeert Uytterhoeven1-6/+169
Implement support for pull-up (most pins, excl. DU_DOTCLKIN and EXTALR) and pull-down (most pins, excl. JTAG) handling for the R-Car V3M SoC, using the common R-Car bias handling. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/bcfad447624d874258a45a92554574b8fe9f712f.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a7794: Add bias pinconf supportGeert Uytterhoeven1-9/+351
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK) handling for R-Car E2 and RZ/G1E SoCs, using the common R-Car bias handling. Note that on RZ/G1E, the "ASEBRK#/ACK" pin is called "ACK", but the code doesn't handle that naming difference. Hence users should use the R-Car naming in DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/f78da2ba937ce98ae9196f4ee54149a5214fd545.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a7792: Add bias pinconf supportGeert Uytterhoeven1-12/+521
Implement support for pull-up (most pins) and pull-down (EDBGREQ) handling for the R-Car V2H SoC, using the common R-Car bias handling. Note that the R-Car V2H Hardware User's Manual Rev. 1.00 says that the LSI Pin Pull-Up Control Register 11 (PUPR11) controls pull-ups for the {SCK,WS,SDATA}[01] pins. These are assumed to be typos, as R-Car V2H has only Serial Sound Interface channels 3 and 4. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/48d2abdd63ee43ed99cb32ed4a5f4d76ba563162.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a7790: Add bias pinconf supportGeert Uytterhoeven1-7/+294
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK) handling for R-Car H2 and RZ/G1H SoCs, using the common R-Car bias handling. Note that on RZ/G1H, the "ASEBRK#/ACK" pin is called "ACK", but the code doesn't handle that naming difference. Hence users should use the R-Car naming in DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/dde6e0b36a4e4494039a3466df208b5ec5c594ee.1619785375.git.geert+renesas@glider.be
2021-05-31pinctrl: renesas: r8a77470: Add bias pinconf supportGeert Uytterhoeven1-40/+306
Implement support for pull-up (most pins) and pull-down (ASEBRK#/ACK) handling for the RZ/G1C SoC, using the common R-Car bias handling. Note that on RZ/G1C, the "ASEBRK#/ACK" pin is called "ACK", but the code doesn't handle that naming difference. Hence users should use the R-Car naming in DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/18c8ebf9fa9e239253a723857e9dffeec775db7e.1619785375.git.geert+renesas@glider.be
2021-05-28Merge tag 'renesas-pinctrl-for-v5.14-tag1' of ↵Linus Walleij5-56/+56
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.14 - Minor fixes and improvements.
2021-05-28pinctrl: mediatek: move bit assignmentLinus Walleij1-1/+1
The bit needs offset to be defined which happens some lines below. Looks like a bug. The kernel test robot complains: drivers/pinctrl/mediatek/pinctrl-mtk-common.c:137:12: warning: variable 'offset' is uninitialized when used here [-Wuninitialized] bit = BIT(offset & pctl->devdata->mode_mask); ^~~~~~ Fix it up by reverting to what was done before. Cc: Fabien Parent <fparent@baylibre.com> Cc: Sean Wang <sean.wang@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Mattijs Korpershoek <mkorpershoek@baylibre.com> Cc: linux-mediatek@lists.infradead.org Fixes: 9f940d8ecf92 ("pinctrl: mediatek: don't hardcode mode encoding in common code") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28pinctrl: bcm2835: Accept fewer than expected IRQsPhil Elwell1-2/+6
The downstream .dts files only request two GPIO IRQs. Truncate the array of parent IRQs when irq_of_parse_and_map returns 0. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210521090158.26932-1-iivanov@suse.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28pinctrl: Fix kernel-docYang Li1-1/+1
Fix function name in pinctrl-single.c kernel-doc comment to remove a warning found by clang_w1. drivers/pinctrl/pinctrl-single.c:1523: warning: expecting prototype for pcs_irq_handle(). Prototype was for pcs_irq_chain_handler() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1621998464-10918-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settingsSteven Lee2-4/+29
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces. Current pinctrl driver only define the first sgpio master and slave interfaces. The second SGPIO master and slave interfaces should be added in pinctrl driver as well. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210525055308.31069-4-steven_lee@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-27pinctrl: mediatek: add support for mt8365 SoCFabien Parent4-0/+2020
Add pinctrl driver for MT8365 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20210519162409.3755679-3-fparent@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-27pinctrl: mediatek: don't hardcode mode encoding in common codeFabien Parent10-10/+36
MT8365 encode the pins mode differently than other MTK pinctrl drivers that use the PINCTRL_MTK common code. Add 3 new fields in mtk_pinctrl_devdata in order to store how pin modes are encoded into the register. At the same time update all the pinctrl driver that depends on CONFIG_PINCTRL_MTK. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20210519162409.3755679-2-fparent@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-25pinctrl: at91: Constify struct at91_pinctrl_mux_opsRikard Falkeborn1-7/+7
The at91_pinctrl_mux_ops struct is never modified by the driver. Make it const wherever it is possible to allow the compiler to put the static variables in read-only memory. Note that sam9x60_ops was already const, but the const was cast away when the return value of of_match_device() was cast to a pointer to a non-const struct at91_pinctrl_mux_ops. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210512180140.33293-1-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-25pinctrl: npcm: Align a few entries in the pin function tableJonathan Neuschäfer1-2/+2
The entries for GPIO 33 and 34 are not properly aligned. Fix the alignment. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20210513160947.1716185-1-j.neuschaefer@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-25pinctrl/amd: Add device HID for new AMD GPIO controllerMaximilian Luz1-0/+1
Add device HID AMDI0031 to the AMD GPIO controller driver match table. This controller can be found on Microsoft Surface Laptop 4 devices and seems similar enough that we can just copy the existing AMDI0030 entry. Cc: <stable@vger.kernel.org> # 5.10+ Tested-by: Sachi King <nakato@nakato.io> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20210512210316.1982416-1-luzmaximilian@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-25pinctrl: tigerlake: Add Alder Lake-M ACPI IDAndy Shevchenko1-0/+1
Intel Alder Lake-M PCH has the same GPIO hardware than Tiger Lake-LP PCH but the ACPI ID is different. Add this new ACPI ID to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-05-20pinctrl: qcom: spmi-gpio: Add support for pm7325satya priya1-0/+1
Add compatible string for PM7325 pmic GPIO support to the Qualcomm PMIC GPIO driver. Signed-off-by: satya priya <skakit@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1620817988-18809-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-20pinctrl: iproc-gpio: Remove redundant error printing in iproc_gpio_probe()Zhen Lei1-3/+1
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20210511085126.4287-1-thunder.leizhen@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-20pinctrl: ocelot: Remove redundant error printing in ocelot_pinctrl_probe()Zhen Lei1-3/+1
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210511090936.4452-1-thunder.leizhen@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-20pinctrl: equilibrium: Add missing MODULE_DEVICE_TABLEBixuan Cui1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/20210508031502.53637-1-cuibixuan@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-19pinctrl: qcom: spmi-mpp: Add compatible for pmi8994Bjorn Andersson1-0/+1
The PMI8994 has 4 multi-purpose-pins, add a compatible for this hardware block to the MPP driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210429003751.224232-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-19pinctrl: amd: Implement irq_set_wakeRaul E Rangel1-1/+31
This allows the OS to control which devices produce wake events. $ grep enabled /sys/kernel/irq/*/wakeup /sys/kernel/irq/24/wakeup:enabled Signed-off-by: Raul E Rangel <rrangel@chromium.org> Link: https://lore.kernel.org/r/20210429163341.1.I7631534622233689dd81410525e0dd617b9b2012@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-19pinctrl: aspeed: Fix minor documentation errorSouptick Joarder4-6/+8
Kernel test robot throws below warning -> drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c:2705: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c:2614: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinctrl-aspeed.c:111: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/pinctrl/aspeed/pinmux-aspeed.c:24: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fix minor documentation error. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1619353584-8196-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-11pinctrl: renesas: r8a779{51,6,65}: Reduce non-functional differencesGeert Uytterhoeven3-44/+46
Change whitespace in the pin control drivers for R-Car H3 ES2.0+, R-Car M3-W/M3-W+, and R-Car M3-N, to reduce the differences among these very similar drivers. These changes have no functional impact. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/527b45ebfc664a80e41cb0136677db7260e11437.1619785375.git.geert+renesas@glider.be
2021-05-11pinctrl: renesas: r8a7778: Remove unused PORT_GP_PUP_1() macroGeert Uytterhoeven1-3/+0
The last user was removed in commit dd1f760bffcee2c5 ("pinctrl: sh-pfc: r8a7778: Use common PORT_GP_CFG_27() macro"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/129147ac57f5e931cc7108db0a6483b803a1b8f4.1619785375.git.geert+renesas@glider.be
2021-05-11pinctrl: renesas: r8a77990: Drop bogus PUEN_ prefixes in commentsGeert Uytterhoeven1-4/+4
The "PUEN_" prefixes are part of the bit names of the PUEN registers, while the comments should refer to the actual pin names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/9ea85ae8973f6d9b3d10f02f0d9b4ab6a086ec63.1619785375.git.geert+renesas@glider.be
2021-05-11pinctrl: renesas: r8a77990: JTAG pins do not have pull-down capabilitiesGeert Uytterhoeven1-4/+4
Hence remove the SH_PFC_PIN_CFG_PULL_DOWN flags from their pin descriptions. Fixes: 83f6941a42a5e773 ("pinctrl: sh-pfc: r8a77990: Add bias pinconf support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/da4b2d69955840a506412f1e8099607a0da97ecc.1619785375.git.geert+renesas@glider.be
2021-05-11pinctrl: renesas: r8a7796: Add missing bias for PRESET# pinGeert Uytterhoeven1-1/+2
R-Car Gen3 Hardware Manual Errata for Rev. 0.52 of Nov 30, 2016, added the configuration bit for bias pull-down control for the PRESET# pin on R-Car M3-W. Add driver support for controlling pull-down on this pin. Fixes: 2d40bd24274d2577 ("pinctrl: sh-pfc: r8a7796: Add bias pinconf support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/c479de5b3f235c2f7d5faea9e7e08e6fccb135df.1619785375.git.geert+renesas@glider.be
2021-05-08linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>Masahiro Yamada1-0/+3
<linux/kconfig.h> is included from all the kernel-space source files, including C, assembly, linker scripts. It is intended to contain a minimal set of macros to evaluate CONFIG options. IF_ENABLED() is an intruder here because (x ? y : z) is C code, which should not be included from assembly files or linker scripts. Also, <linux/kconfig.h> is no longer self-contained because NULL is defined in <linux/stddef.h>. Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF() takes the general boolean expression instead of a CONFIG option so that it fits better in <linux/kernel.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org>
2021-04-30Merge tag 'pinctrl-v5.13-1' of ↵Linus Torvalds86-1012/+9710
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is a lot going on! Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls" * tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: Add Xilinx ZynqMP pinctrl driver support firmware: xilinx: Add pinctrl support pinctrl: rockchip: do coding style for mux route struct pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param pinctrl: Introduce MODE group in enum pin_config_param pinctrl: Keep enum pin_config_param ordered by name dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver pinctrl: core: Fix kernel doc string for pin_get_name() pinctrl: mediatek: use spin lock in mtk_rmw pinctrl: add drive for I2C related pins on MT8195 pinctrl: add pinctrl driver on mt8195 dt-bindings: pinctrl: mt8195: add pinctrl file and binding document pinctrl: Ingenic: Add pinctrl driver for X2000. pinctrl: Ingenic: Add pinctrl driver for JZ4775. pinctrl: Ingenic: Add pinctrl driver for JZ4755. pinctrl: Ingenic: Add pinctrl driver for JZ4750. pinctrl: Ingenic: Add pinctrl driver for JZ4730. dt-bindings: pinctrl: Add bindings for new Ingenic SoCs. pinctrl: Ingenic: Reformat the code. pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs. ...
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 12:00:34 +0300