summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/sunxi
AgeCommit message (Collapse)AuthorFilesLines
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-8/+10
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-05-16pinctrl: sunxi: add support for H6 R_PIO pin controllerIcenowy Zheng3-0/+133
Allwinner H6 SoC has a R_PIO pin controller like other Allwinner SoCs, which controls the PL and PM pin banks. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-02pinctrl: sunxi: Use of_clk_get_parent_count() instead of open codingGeert Uytterhoeven1-2/+2
A new open coder has crept in since 470b73a38470e8ba ("pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding"), replace it. of_clk_get_parent_count() was moved to <linux/of_clk.h>, so include that instead of <linux/clk-provider.h>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-27pinctrl: sunxi: add support for the Allwinner H6 main pin controllerIcenowy Zheng3-0/+619
The Allwinner H6 SoC has two pin controllers, one main controller (called CPUX-PORT in user manual) and one controller in CPUs power domain (called CPUS-PORT in user manual). This commit introduces support for the main pin controller on H6. The pin bank A and B are not wired out and hidden from the SoC's documents, however it's shown that the "ATE" (an AC200 chip co-packaged with the H6 die) is connected to the main SoC die via these pin banks. The information about these banks is just copied from the BSP pinctrl driver, but re-formatted to fit the mainline pinctrl driver format. The GPIO functions are dropped, as they're impossible to use -- except a GPIO&IRQ only pin (PB20) which might be the IRQ of ATE. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27pinctrl: sunxi: change irq_bank_base to irq_bank_mapIcenowy Zheng3-4/+11
The Allwinner H6 SoC have its pin controllers with the first IRQ-capable GPIO bank at IRQ bank 1 and the second bank at IRQ bank 5. Change the current code that uses IRQ bank base to a IRQ bank map, in order to support the case that holes exist among IRQ banks. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27pinctrl: sunxi: introduce IRQ bank conversion functionIcenowy Zheng1-11/+12
The Allwinner H6 SoC have its pin controllers with the first IRQ-capable GPIO bank at IRQ bank 1 and the second bank at IRQ bank 5. Some refactors in the sunxi pinctrl framework are needed. This commit introduces a IRQ bank conversion function, which replaces the "(bank_base + bank)" code in IRQ register access. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27pinctrl: sunxi: refactor irq related register function to have descIcenowy Zheng2-20/+28
As the new H6 SoC has holes in the IRQ registers, refactor the IRQ related register function for getting the full pinctrl desc structure. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-23pinctrl: sunxi: always look for apb blockAndre Przywara1-1/+2
The Allwinner pinctrl device tree binding suggests that a clock named "apb" would drive the pin controller IP. However (for legacy reasons) we rely on this clock actually being the first clock defined. Since named clocks can be in any order, let's explicitly check for a clock called "apb" if there is more than one clock referenced. Kudo to Maxime for suggesting this much more elegant approach. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-03Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-01-22pinctrl: sunxi: Use of_clk_get_parent_count() instead of open codingGeert Uytterhoeven1-1/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly.hao_zhang1-1/+3
Pin function can not be match correctly when SUNXI_PIN describe with mutiple variant and same function. such as: on pinctrl-sun4i-a10.c SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 2), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), SUNXI_FUNCTION_VARIANT(0x2, "pwm", /* PWM0 */ PINCTRL_SUN4I_A10 | PINCTRL_SUN7I_A20), SUNXI_FUNCTION_VARIANT(0x3, "pwm", /* PWM0 */ PINCTRL_SUN8I_R40)), it would always match to the first variant function (PINCTRL_SUN4I_A10, PINCTRL_SUN7I_A20) so we should add variant compare on it. Signed-off-by: hao_zhang <hao5781286@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-28pinctrl: sunxi: fix a typo when merging A20 support to A10 driverIcenowy Zheng1-1/+1
When merging A20 pinctrl support to A10 pinctrl driver, the I2C function of PI3 is wrongly written as "i2c3" (it should be "i2c4"). Fix this typo. Fixes: cad4e209c102 ("pinctrl: sunxi: add support of R40 to A10 pinctrl driver") Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30pinctrl: sunxi: Disable strict mode for H5 driverAndre Przywara1-2/+4
All of the H5 boards in the kernel reference the MMC0 CD pin twice in their DT, so strict mode will make the MMC driver fail to load. To keep existing DTs working, disable strict mode in the H5 driver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reported-by: Chris Obbard <obbardc@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30pinctrl: sunxi: Fix A64 UART mux valueAndre Przywara1-1/+1
To use pin PF4 as the RX signal of UART0, we have to write 0b011 into the respective pin controller register. Fix the wrong value we had in our table so far. Fixes: 96851d391d02 ("drivers: pinctrl: add driver for Allwinner A64 SoC") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-30pinctrl: sunxi: Fix A80 interrupt pin bankAndre Przywara1-3/+3
On the A80 the pins on port B can trigger interrupts, and those are assigned to the second interrupt bank. Having two pins assigned to the same interrupt bank/pin combination does not look healthy (instead more like a copy&paste bug from pins PA14-PA16), so fix the interrupt bank for pins PB14-PB16, which is actually 1. I don't have any A80 board, so could not test this. Fixes: d5e9fb31baa2 ("pinctrl: sunxi: Add A80 pinctrl muxing options") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds13-3/+26
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31pinctrl: sunxi: Enforce the strict mode by defaultMaxime Ripard1-0/+1
The strict mode should always have been enabled on our driver, and leaving it unchecked just makes it harder to find a migration path as time passes. Let's enable it by default now so that hopefully the new SoCs should be safe. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-31pinctrl: sunxi: Disable strict mode for old pinctrl driversMaxime Ripard11-2/+13
Old pinctrl drivers will need to disable strict mode for various reasons, among which: - Some DT will still have a pinctrl group for each GPIO used, which will be rejected by pin_request. While we could remove those nodes, we still have to deal with old DTs. - Some GPIOs on these boards need to have their pin configuration changed (for bias or current), and there's no clear migration path Let's disable the strict mode on those SoCs so that there's no breakage. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-31pinctrl: sunxi: Introduce the strict flagMaxime Ripard2-1/+12
Our pinctrl device should have had strict set all along. However, it wasn't the case, and most of our old device trees also have a pinctrl group in addition to the GPIOs properties, which mean that we can't really turn it on now. All our new SoCs don't have that group, so we should still enable that mode on the newer one though. In order to enable it by default, add a flag that will allow to disable that mode that should be set by pinctrl drivers that cannot be migrated. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31Revert "pinctrl: sunxi: Don't enforce bias disable (for now)"Priit Laes1-1/+2
This reverts commit 2154d94b40ea2a5de05245521371d0461bb0d669. The original patch was intented to avoid some issues with the sunxi gpio rework and was supposed to be reverted after all the required DT bits had been merged around v4.10. Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: sunxi: fix wrong irq_banks number for H5 pinctrlIcenowy Zheng1-3/+23
The pin controller of Allwinner H5 has three IRQ banks, however in old versions of drivers and device trees, only two are set, which makes PG bank IRQ not available. If it's directly set to 3, the old device trees will fail to boot. Add a workaround (and a warning) for older device trees, and allow new device trees to use correct 3 IRQ banks. Fixes: 838adb576d4a ("drivers: pinctrl: add driver for Allwinner H5 SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: sunxi: fix V3s pinctrl driver IRQ bank baseIcenowy Zheng1-0/+1
The V3s pin controller doesn't have the bank 0 (starts at address 0x200), which is like A33. However, this is not worked around when developing the driver, which makes IRQ not working. Fix the IRQ bank base. Fixes: 56d9e4a76039 ("pinctrl: sunxi: add driver for V3s SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: sunxi: explicitly request exclusive reset controlPhilipp Zabel2-2/+2
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: sunxi: rename R_PIO i2c pin function nameIcenowy Zheng3-6/+6
The I2C pin functions in R_PIO used to be named "s_twi". As we usually use the name "i2c" instead of "twi" in the mainline kernel, change these names to "s_i2c" for consistency. The "s_twi" functions are not yet referenced by any device trees in mainline kernel so I think it's safe to change the name. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: sunxi: add support of R40 to A10 pinctrl driverIcenowy Zheng2-79/+196
R40 is said to be an upgrade of A20, and its pin configuration is also similar to A20 (and thus similar to A10). Add support for R40 to the A10 pinctrl driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-07-31pinctrl: sunxi: add a missing function of A10/A20 pinctrl driverIcenowy Zheng1-0/+1
The PH16 pin has a function with mux id 0x5, which is the DET pin of the "sim" (smart card reader) IP block. This function is missing in old versions of A10/A20 SoCs' datasheets and user manuals, so it's also missing in the old drivers. The newest A10 Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and it's discovered during implementing R40 pinctrl driver. Add it to the driver. As we now merged A20 pinctrl driver to the A10 one, we need to only fix the A10 driver now. Fixes: f2821b1ca3a2 ("pinctrl: sunxi: Move Allwinner A10 pinctrl driver to a driver of its own") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: sunxi: Add support for A83T R_PIOChen-Yu Tsai3-0/+133
The R_PIO on the A83T is almost the same as the one found on the A64, except that the CIR_RX function was moved from pin PL11 to pin PL12. Add a driver for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: sunxi: constify irq_domain_opsTobias Klauser1-1/+1
struct irq_domain_ops is not modified, so it can be made const. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: sunxi: drop dedicated A20 driverIcenowy Zheng3-1061/+0
As we added A20 support to A10 pinctrl driver, now we can delete the dedicated A20 pinctrl driver, which is duplicated code. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> [Drop Makefile entry] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: sunxi: add A20 support to A10 driverIcenowy Zheng2-65/+226
As A20 is designed as a pin-compatible upgrade of A10, their pin controller are very similar, and can share one driver. Add A20 support to the A10 driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: sunxi: Add SoC ID definitions for A10, A20 and R40 SoCsIcenowy Zheng1-0/+3
Allwinner A10, A20 and R40 SoCs have similar GPIO layout. Add SoC definitions in pinctrl-sunxi.h, in order to merge A20 support into A10 driver, and add R40 support into it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23pinctrl: sunxi: Fix SPDIF function name for A83TChen-Yu Tsai1-1/+1
We use well known standard names for functions that have name, such as I2C, SPI, SPDIF, etc.. Fix the function name of SPDIF, which was named OWA (One Wire Audio) based on Allwinner datasheets. Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16pinctrl: sunxi: make use of raw_spinlock variantsJulia Cartwright2-14/+14
The sunxi pinctrl driver currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14pinctrl: sunxi: select GPIOLIBIcenowy Zheng1-0/+1
Allwinner pin controllers are also GPIO controllers. Currently, if GPIOLIB is forgot to be chosen, the build of pinctrl-sunxi.c will fail for lacking a lot of gpiochip_* functions. Select GPIOLIB to ensure this driver can be built. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14pinctrl: sunxi: Add A64 R_PIO controller supportIcenowy Zheng3-0/+130
The A64 has a R_PIO pin controller, similar to the one found on the H3 SoC. Add support for the pins controlled by the R_PIO controller. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-14pinctrl: sunxi: refactor pinctrl choice selecting for ARM64Icenowy Zheng1-4/+4
ARM64 Allwinner SoCs used to have every pinctrl driver selected in ARCH_SUNXI. Change this to make their default value to (ARM64 && ARCH_SUNXI). Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-22Merge tag 'pinctrl-v4.11-1' of ↵Linus Torvalds11-1916/+1225
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
2017-02-06pinctrl: sunxi: make sun5i explicitly non-modularPaul Gortmaker1-8/+3
We had all these corrected in commit 0c8c6ba00cbf ("pinctrl: sunxi: make bool drivers explicitly non-modular") but this new one recently crept in. The Kconfig currently controlling compilation of this code is: drivers/pinctrl/sunxi/Kconfig:config PINCTRL_SUN5I drivers/pinctrl/sunxi/Kconfig: def_bool MACH_SUN5I ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: sunxi: Remove stray printk call in sun5i driver's probe functionChen-Yu Tsai1-2/+0
There is a stray printk call in the new sun5i pinctrl driver's probe function. Remove it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: sunxi: Remove redundant A31s pinctrl driverChen-Yu Tsai3-814/+0
Now that we can support the A31s pin controller with the A31 driver using the new variants support, the independent A31s driver becomes redundant. Remove it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06pinctrl: sunxi: Support A31/A31s with pinctrl variantsChen-Yu Tsai2-65/+121
The A31s is a trimmed down version of the A31. Some hardware blocks are removed, thus not available for muxing on the external pins. Some external pins were directly removed. This makes it easy to support the A31s pin controller with the A31 driver. We just mark the pins and functions that were trimmed as A31 only. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30drivers: pinctrl: add driver for Allwinner H5 SoCIcenowy Zheng3-0/+563
Based on the Allwinner H5 datasheet and the pinctrl driver of the backward-compatible H3 this introduces the pin multiplex assignments for the H5 SoC. H5 introduced some more pin functions (e.g. three more groups of TS pins, and one more groups of SIM pins) than H3. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: sunxi: Don't enforce bias disable (for now)Maxime Ripard1-2/+1
Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually enforced enforced the disabling of the pull up/down resistors instead of ignoring it like it was done before. This was part of a wider rework to switch to the generic pinconf bindings, and was meant to be merged together with DT patches that were switching to it, and removing what was considered default values by both the binding and the boards. This included no bias on a pin. However, those DT patches were delayed to 4.11, which would be fine only for a significant number boards having the bias setup wrong, which in turns break the MMC on those boards (and possibly other devices too). In order to avoid conflicts as much as possible, bring back the old behaviour for 4.10, and we'll revert that commit once all the DT bits will have landed. Tested-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26Merge branch 'ib-pinctrl-genprops' into develLinus Walleij1-1/+1
2017-01-26pinctrl: Widen the generic pinconf argument from 16 to 24 bitsMika Westerberg1-1/+1
The current pinconf packed format allows only 16-bit argument limiting the maximum value 65535. For most types this is enough. However, debounce time can be in range of hundreths of milliseconds in case of mechanical switches so we cannot represent the worst case using the current format. In order to support larger values change the packed format so that the lower 8 bits are used as type which leaves 24 bits for the argument. This allows representing values up to 16777215 and debounce times up to 16 seconds. We also convert the existing users to use 32-bit integer when extracting argument from the packed configuration value. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11pinctrl: sunxi: add driver for V3s SoCIcenowy Zheng3-0/+326
V3s SoC features only a pin controller (for the lack of CPUs part). Add a driver for this controller. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 05:47:30 +0300