summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-st.c
AgeCommit message (Collapse)AuthorFilesLines
2022-10-04pinctrl: st: stop abusing of_get_named_gpio()Dmitry Torokhov1-4/+30
Pin descriptions for this chip only look like standard GPIO device tree descriptions, while in fact they contain additional data (in excess of number of cells specified in description of gpio controllers). They also refer to only pins/gpios belonging to the driver and not to arbitrary gpio in the system. Because we want to stop exporting OF-specific handlers from gpiolib-of, let's parse the pin reference ourself instead of trying to call of_get_named_gpio(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/YzSsgoVoJn4+mSpv@google.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-18pinctrl: st: Switch to use devm_kasprintf_strarray()Andy Shevchenko1-2/+10
Since we have a generic helper, switch the module to use it. As a side effect, add check for the memory allocation failures and cleanup it either in error case or when driver is unloading. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-18pinctrl: st: Convert to use dev_err_probe()Andy Shevchenko1-20/+10
It's fine to call dev_err_probe() in ->probe() when error code is known. Convert the driver to use dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-18pinctrl: st: Make use of the devm_platform_ioremap_resource_byname()Andy Shevchenko1-6/+1
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-18pinctrl: st: Use temporary variable for struct deviceAndy Shevchenko1-39/+34
Use temporary variable for struct device to make code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-11-18pinctrl: st: Drop wrong kernel doc annotationsAndy Shevchenko1-2/+2
Kernel doc validator is not happy: .../pinctrl-st.c:59: warning: This comment starts with '/**', but isn't a kernel-doc comment. .../pinctrl-st.c:73: warning: This comment starts with '/**', but isn't a kernel-doc comment. Drop them as they are indeed not a kernel doc comments. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: Fix spelling mistake "atleast" -> "at least"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210826123516.14441-1-colin.king@canonical.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-12pinctrl: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-1/+1
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-01-05pinctrl: remove empty lines in pinctrl subsystemZhaoyu Liu1-1/+0
Remove all empty lines at the end of functions in pinctrl subsystem, and make the code neat. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Zhaoyu Liu <zackaryliu@yeah.net> Link: https://lore.kernel.org/r/X98NP6NFK1Afzrgd@manjaro Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: Use new GPIO_LINE_DIRECTIONMatti Vaittinen1-3/+11
Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: st: Pass irqchip when adding gpiochipLinus Walleij1-21/+32
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion: the ST pin controller errors out of adding a irqchip if the interrupt is invalid or missing or if the irqmux is not present: the irqchip should not be added if either of these errors happen, so rewrite the code to deal with that. Keep the exit path where the gpio_chip is added no matter what the status of the irq is. Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191001135147.29416-1-linus.walleij@linaro.org
2019-08-21pinctrl: st: Add of_node_put() before returnNishka Dasgupta1-2/+7
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in three places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190815060609.3056-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-21pinctrl: st: Include the right headerLinus Walleij1-1/+2
The ST pinctrl driver wants to provode a gpio_chip but is not including the header for this, fix the inclusion to use the right header. <linux/of_gpio.h> has to remain as the driver is calling of_get_named_gpio(). Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190820111135.10701-1-linus.walleij@linaro.org
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-23pinctrl: st: fix leaked of_node referencesWen Yang1-5/+10
The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29pinctrl: Convert to using %pOFn instead of device_node.nameRob Herring1-3/+3
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-15/+16
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: st: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-3/+3
These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl-st: fix of_irq_to_resource() result checkSergei Shtylyov1-1/+1
of_irq_to_resource() has recently been fixed to return negative error #'s along with 0 in case of failure, however the ST driver still only regards 0 as failure indication -- fix it up. Fixes: 7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: Convert to using %pOF instead of full_nameRob Herring1-1/+1
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee@kernel.org> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Barry Song <baohua@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@stlinux.com Cc: linux-samsung-soc@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: st: constify gpio_chip structureGustavo A. R. Silva1-1/+1
This structure is only used to copy into other structure, so declare it as const. This issue was detected using Coccinelle and the following semantic patch: @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; In the following log you can see a significant difference in the code size and data segment, hence in the dec segment. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 21671 3632 128 25431 6357 drivers/pinctrl/pinctrl-st.o after: text data bss dec hex filename 21366 3576 128 25070 61ee drivers/pinctrl/pinctrl-st.o Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23pinctrl: st: add irq_request/release_resources callbacksPatrice Chotard1-6/+24
When using GPIO as IRQ source, the GPIO must be configured in INPUT. Callbacks dedicated for this was missing in pinctrl-st driver. This fix the following kernel error when trying to lock a gpio as IRQ: [ 7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ [ 7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-13Merge tag 'pinctrl-v4.10-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates from Linus Walleij: "Bulk pin control changes for the v4.10 kernel cycle: No core changes this time. Mainly gradual improvement and feature growth in the drivers. New drivers: - New driver for TI DA850/OMAP-L138/AM18XX pinconf - The SX150x was moved over from the GPIO subsystem and reimagined as a pin control driver with GPIO support in a joint effort by three independent users of this hardware. The result was amazingly good! - New subdriver for the Oxnas OX820 Improvements: - The sunxi driver now supports the generic pin control bindings rather than the sunxi-specific. Add debouncing support to the driver. - Simplifications in pinctrl-single adding a generic parser. - Two downstream fixes and move the Raspberry Pi BCM2835 over to use the generic GPIOLIB_IRQCHIP" * tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits) pinctrl: sx150x: use new nested IRQ infrastructure pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505 pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced' pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147] pinctrl: mt8173: set GPIO16 to usb iddig mode pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf devicetree: bindings: pinctrl: Add binding for ti,da850-pupd Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition pinctrl: intel: set default handler to be handle_bad_irq() pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507 pinctrl: sx150x: sort chips by part number pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) pinctrl: imx: fix imx_pinctrl_desc initialization pinctrl: sx150x: support setting multiple pins at once pinctrl: sx150x: various spelling fixes and some white-space cleanup pinctrl: mediatek: use builtin_platform_driver pinctrl: stm32: use builtin_platform_driver pinctrl: sunxi: Testing the wrong variable pinctrl: nomadik: split up and comments MC0 pins ...
2016-11-08pinctrl: st: st_pctl_dt_parse_groups simplify expressionHeinrich Schuchardt1-1/+1
for_each_property_of_node(pins, pp) checks that pp is not NULL. So there is no need to check it inside the loop. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08pinctrl: st: st_pinconf_dbg_show wrong format stringHeinrich Schuchardt1-1/+1
function is defined as unsigned int. So we need %u to print it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-31pinctrl: st: don't specify default interrupt triggerPatrice Chotard1-1/+1
Thanks to 332e99d5ae4 which now alerts of default trigger usage when configuring interrupts. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15pinctrl: st: Remove STiH415/6 SoC pinctrl driver support.Peter Griffin1-62/+14
STiH415/6 SoC support is being removed from the kernel. This patch updates the ST pinctrl driver and removes references to these obsolete platforms. As some structures referenced by STiH407 based configuration were shared with STiH416 we update these names to match the remaining supported platform. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Cc: <linus.walleij@linaro.org> Cc: <linux-gpio@vger.kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-11pinctrl: st: Use second parameter to gpio specifierPatrice Chotard1-17/+0
This patch allows to use the second parameter of gpio specifier, which is used to specify whether the gpio is active high or low. Simply remove specific of_xlate callback() and of_gpio_n_cells and use default one set by of_gpiochip_add() which allows to use second parameter gpio specifier. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15pinctrl: fix incorrect inline keyword in multiple driversArnd Bergmann1-1/+1
When building with 'make W=1', we get harmless warnings about five drivers in drivers/pinctrl, which all contain a copy of the same line: drivers/pinctrl/freescale/pinctrl-imx1-core.c:160:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] This replaces the somewhat nonstandard 'static const inline' with 'static inline const', which has the same meaning but does not cause this warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: st: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan1-1/+1
Use devm_pinctrl_register() for pin control registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: kernel@stlinux.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-27pinctrl: st: activate strict mux modePatrice Chotard1-0/+1
This activates strict mode muxing for the ST pin controllers, as these do not allow GPIO and functions to use the same pin simultaneously. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: st: use gpiochip data pointerLinus Walleij1-12/+9
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16pinctrl: replace trivial implementations of gpio_chip request/freeJonas Gorski1-12/+2
Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-2/+2
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-07-17pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu1-3/+3
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-02Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This contains: - a series of fixes for interrupt drivers to prevent a potential race when installing a chained interrupt handler - a fix for cpumask pointer misuse - a fix for using the wrong interrupt number from struct irq_data - removal of unused code and outdated comments - a few new helper functions which allow us to cleanup the interrupt handling code further in 4.3 I decided against doing the cleanup at the end of this merge window and rather do the preparatory steps for 4.3, so we can run the final ABI change at the end of the 4.3 merge window with less risk" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked() genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked() genirq: Introduce helper irq_desc_get_irq() genirq: Remove irq_node() genirq: Clean up outdated comments related to include/linux/irqdesc.h mn10300: Fix incorrect use of irq_data->affinity MIPS/ralink: Fix race in installing chained IRQ handler MIPS/pci: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler m68k/psc: Fix race in installing chained IRQ handler avr32/at32ap: Fix race in installing chained IRQ handler sh/intc: Fix race in installing chained IRQ handler sh/intc: Fix potential race in installing chained IRQ handler pinctrl/sun4i: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/exynos: Fix race in installing chained IRQ handler pinctrl/st: Fix race in installing chained IRQ handler pinctrl/adi2: Fix race in installing chained IRQ handler ...
2015-06-25pinctrl/st: Fix race in installing chained IRQ handlerThomas Gleixner1-2/+2
Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@stlinux.com Cc: linux-gpio@vger.kernel.org
2015-06-10pinctrl: make pinctrl_register() return proper error codeMasahiro Yamada1-2/+2
Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27pinctrl: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25pinctrl: st: Display pin's function when printing pinctrl debug informationLee Jones1-1/+11
Great for easily determining which mode a pin is operating in. This patch was particularly helpful when debugging a recent GPIO/ Pinctrl disparity issue. Before: $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0] After [GPIO]: $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] GPIO [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0] After [Alt]: $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] Alt Fn 2 [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0] Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25pinctrl: st: Show correct pin direction also in GPIO modeLee Jones1-1/+7
Until now ST's pinconf_dbg_show() call-back has displayed the PIO alternate function direction, which is only relevant if a pin is operating in an alternate function mode i.e not GPIO mode. If a pin is in GPIO mode its direction is both set and status is obtained by a completely different/unrelated bunch of registers. This change ensures that the correct pin direction is shown, even if a pin is operating in GPIO mode. Reported-by: Olivier Clergeaud <olivier.clergeaud@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25pinctrl: st: Supply a GPIO get_direction() call-backLee Jones1-1/+30
ST's hardware differentiates between GPIO mode and Pinctrl alternate functions. When a pin is in GPIO mode, there are dedicated registers to set and obtain direction status. However, If a pin's alternate function is in use then the direction is set and status is derived from a bunch of syscon registers. The issue is; until now there was a lack of parity between the two. For example: Catting the two following information sources could result in conflicting information (output has been snipped for simplicity): $ cat /sys/kernel/debug/gpio GPIOs 32-39, platform/961f080.pin-controller-sbc, PIO4: gpio-33 (? ) out hi $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0] In this example GPIO-33 is a GPIO controlled LED, which is set for output, as you'd expect. However, when the same information is drafted from Pinctrl, it clearly states that OE (Output Enable) is not set i.e. the pin is set for input. This is because OE normally only represents alternate functions and has no bearing on how the pin operates when in Alt-0 (GPIO mode). This patch changes the current semantics and provides a parity link between the two subsystems. The get_direction() call-back firstly determines which function a pin is operating in, then uses the appropriate helpers for that mode. Reported-by: Olivier Clergeaud <olivier.clergeaud@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25pinctrl: st: Move st_get_pio_control() further up the source fileLee Jones1-10/+10
st_get_pio_control() will be used by subsequent calls which are to be located above its original position. This is required to prevent the need for an unnecessary forward-declaration/prototype. Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25pinctrl: st: Introduce a 'get pin function' callLee Jones1-0/+14
This call fetches the numerical function value a specified pin is currently operating in. Function zero is more often than not the GPIO function. Greater than zero values represent an alternative function. You'd need to either look those up in the Device Tree sources or the Programmer's Manual. Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-07pinctrl: st: Add irq_disable hook to st_gpio_irqchipPatrice CHOTARD1-0/+1
Currently disable_irq() doesn't work for pinctrl-st driver, due to missing irq_disable hook in the driver. disable_irq() is required only for level-triggered interrupts, which is not the case normally. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-07pinctrl: st: avoid multiple mutex lockFrancesco VIRLINZI1-1/+3
Using the sysfs inteface to inspect the pins configuration the system can walk around a path which acquires the same mutex twice. On STiH407 platform, for example : cat /sys/kernel/debug/pinctrl/920f080.pin-controller-front0/pinconf-pins hangs the kernel and never returns. With this patch the mutex is temporary freed. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-10-21pinctrl: st: Fix Sparse errorPramod Gurav1-1/+1
This change fixes below sparse error, drivers/pinctrl/pinctrl-st.c:1515:31: error: incompatible types for operation (>) drivers/pinctrl/pinctrl-st.c:1515:31: left side has type void [noderef] <asn:2>*irqmux_base drivers/pinctrl/pinctrl-st.c:1515:31: right side has type int Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> CC: Linus Walleij <linus.walleij@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 08:22:50 +0300