summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/mediatek
AgeCommit message (Collapse)AuthorFilesLines
2022-12-14Merge tag 'pinctrl-v6.2-1' of ↵Linus Torvalds6-33/+183
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The two large chunks is the header clean-up from Andy and the Qualcomm DT bindings clean-up from Krzysztof. Each which could give rise to conflicts, but I haven't seen any. The YAML conversions happening around the device tree is the biggest item in the series and is the result of Rob Herrings ambition to autovalidate these trees against strict schemas and it is paying off in lots of bugs found and ever prettier device trees. Sooner or later the transition will be complete, Krzysztof is fixing up all of the Qualcomm stuff, which is pretty voluminous. Core changes: - minor but nice and important documentation clean-ups New drivers: - subdriver for the Qualcomm SDM670 SoC - subdriver for the Intel Moorefield SoC - trivial support for the NXP Freescale i.MXRT1170 SoC Other changes and improvements - major clean-up of the Qualcomm pin control device tree bindings by Krzysztof - major header clean-up by Andy - some immutable irqchip clean-up for the Actions Semiconductor and Nuvoton drivers - GPIO helpers for The Cypress cy8c95x0 driver - bias handling in the Mediatek MT7986 driver - remove the unused pins-are-numbered concept that never flew" * tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits) pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions() dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered pinctrl: stm32: Remove check for pins-are-numbered pinctrl: mediatek: common: Remove check for pins-are-numbered pinctrl: qcom: remove duplicate included header files pinctrl: sunxi: d1: Add CAN bus pinmuxes pinctrl: loongson2: Fix some const correctness pinctrl: pinconf-generic: add missing of_node_put() pinctrl: intel: Enumerate PWM device when community has a capability pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() pwm: lpss: Allow other drivers to enable PWM LPSS pwm: lpss: Include headers we are the direct user of pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS pwm: Add a stub for devm_pwmchip_add() pinctrl: k210: call of_node_put() pinctrl: starfive: Use existing variable gpio dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching pinconf-generic: fix style issues in pin_config_param doc pinctrl: pinctrl-loongson2: fix Kconfig dependency ...
2022-12-03pinctrl: mediatek: common: Remove check for pins-are-numberedBernhard Rosenkränzer1-6/+0
Remove the check for the unnecessary pins-are-numbered Devicetree property. Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20221129023401.278780-2-bero@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-22pinctrl: meditatek: Startup with the IRQs disabledRicardo Ribalda1-3/+6
If the system is restarted via kexec(), the peripherals do not start with a known state. If the previous system had enabled an IRQs we will receive unexected IRQs that can lock the system. [ 28.109251] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] [ 28.109263] Modules linked in: [ 28.109273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.79-14458-g4b9edf7b1ac6 #1 9f2e76613148af94acccd64c609a552fb4b4354b [ 28.109284] Hardware name: Google Elm (DT) [ 28.109290] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.109298] pc : __do_softirq+0xa0/0x388 [ 28.109309] lr : __do_softirq+0x70/0x388 [ 28.109316] sp : ffffffc008003ee0 [ 28.109321] x29: ffffffc008003f00 x28: 000000000000000a x27: 0000000000000080 [ 28.109334] x26: 0000000000000001 x25: ffffffefa7b350c0 x24: ffffffefa7b47480 [ 28.109346] x23: ffffffefa7b3d000 x22: 0000000000000000 x21: ffffffefa7b0fa40 [ 28.109358] x20: ffffffefa7b005b0 x19: ffffffefa7b47480 x18: 0000000000065b6b [ 28.109370] x17: ffffffefa749c8b0 x16: 000000000000018c x15: 00000000000001b8 [ 28.109382] x14: 00000000000d3b6b x13: 0000000000000006 x12: 0000000000057e91 [ 28.109394] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffefa7b47480 [ 28.109406] x8 : 00000000000000e0 x7 : 000000000f424000 x6 : 0000000000000000 [ 28.109418] x5 : ffffffefa7dfaca0 x4 : ffffffefa7dfadf0 x3 : 000000000000000f [ 28.109429] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000001ac65c5 [ 28.109441] Call trace: [ 28.109447] __do_softirq+0xa0/0x388 [ 28.109454] irq_exit+0xc0/0xe0 [ 28.109464] handle_domain_irq+0x68/0x90 [ 28.109473] gic_handle_irq+0xac/0xf0 [ 28.109480] call_on_irq_stack+0x28/0x50 [ 28.109488] do_interrupt_handler+0x44/0x58 [ 28.109496] el1_interrupt+0x30/0x58 [ 28.109506] el1h_64_irq_handler+0x18/0x24 [ 28.109512] el1h_64_irq+0x7c/0x80 [ 28.109519] arch_local_irq_enable+0xc/0x18 [ 28.109529] default_idle_call+0x40/0x140 [ 28.109539] do_idle+0x108/0x290 [ 28.109547] cpu_startup_entry+0x2c/0x30 [ 28.109554] rest_init+0xe8/0xf8 [ 28.109562] arch_call_rest_init+0x18/0x24 [ 28.109571] start_kernel+0x338/0x42c [ 28.109578] __primary_switched+0xbc/0xc4 [ 28.109588] Kernel panic - not syncing: softlockup: hung tasks Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20221122-mtk-pinctrl-v1-1-bedf5655a3d2@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-15pinctrl: mediatek: Export debounce time tablesLinus Walleij1-0/+3
The kernel test robot complains that in certain combinations when building the Mediatek drivers as modules we lack some debounce table symbols, so export them. Reported-by: kernel test robot <lkp@intel.com> Fixes: e1ff91f9d230 ("pinctrl: mediatek: Fix EINT pins input debounce time configuration") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-14pinctrl: mediatek: Fix EINT pins input debounce time configurationAngeloGioacchino Del Regno22-5/+53
The External Interrupt Controller (EINTC) on all of the supported MediaTek SoCs does support input debouncing, but not all of them index the debounce time values (DBNC_SETTING registers) the same way. Before this change, in some cases, as an example, requesting a debounce time of 16 milliseconds would mistakenly set the relative DBNC_SETTING register to 0x2, resulting in a way shorter debounce time of 500uS. To fix the aforementioned issue, define three different debounce_time arrays, reflecting the correct register index for each value and for each register index variant, and make sure that each SoC pinctrl driver uses the right one. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221111094106.18486-1-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-10pinctrl: mediatek: add pull_type attribute for mediatek MT7986 SoCSam Shih1-0/+56
Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature") add SoC specify 'pull_type' attribute for bias configuration. This patch add pull_type attribute to pinctrl-mt7986.c, and make bias_set_combo and bias_get_combo available to mediatek MT7986 SoC. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221106080114.7426-7-linux@fw-web.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-10pinctrl: mediatek: extend pinctrl-moore to support new bias functionsSam Shih1-7/+42
Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature") introduced SoC specify 'pull_type' attribute to mtk_pinconf_bias_set_combo and mtk_pinconf_bias_get_combo, and make the functions able to support almost all Mediatek SoCs that use pinctrl-mtk-common-v2.c. This patch enables pinctrl_moore to support these functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221106080114.7426-6-linux@fw-web.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-10pinctrl: mediatek: fix the pinconf register offset of some pinsSam Shih1-12/+12
Correct the bias-pull-up, bias-pull-down and bias-disable register offset of mt7986 pin-42 to pin-49, in the original driver, the relative offset value was erroneously decremented by 1. Fixes: 360de6728064 ("pinctrl: mediatek: add support for MT7986 SoC") Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221106080114.7426-5-linux@fw-web.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-09pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPEAngeloGioacchino Del Regno1-0/+3
In pinctrl-paris we're calling the .bias_set_combo() callback when we are asked to set the pin bias to either pull up/down or pull disable. On newer platforms, this callback is mtk_pinconf_bias_set_combo(), located in pinctrl-mtk-common-v2.c: this will check the "pull type" assigned to the requested pin and in case said pin's pull type is MTK_PULL_PU_PD_RSEL_TYPE, this function will set RSEL first, PUPD last, which is fine. The issue comes when we're requesting PIN_CONFIG_BIAS_DISABLE, as this does *not* require setting RSEL but only PU_PD: in this case, the arg is MTK_DISABLE (zero), which is not a supported RSEL, due to which function mtk_pinconf_bias_set_rsel() returns a failure; because of that, mtk_pinconf_bias_set_pu_pd() is never called, hence the pin bias is never set to DISABLE. To fix this issue, add a check to mtk_pinconf_bias_set_rsel(): if we are entering that function with no pullup requested and at the same time the arg is MTK_DISABLE, this means that we're trying to disable pin bias, hence it's safe to return cleanly without ever setting any RSEL register. This makes mtk_pinconf_bias_set_combo() happy, going on with setting the PU_PD registers, which is the only action to actually take to disable bias on a pin/pingroup. Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221104105605.33720-1-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-07pinctrl: mediatek: mt8365: use mt8365_set_clr_mode() callbackBalsam CHIHI1-0/+18
On MT8365, the SET/CLR of the mode is broken and some pin modes won't be set correctly. Use the mt8365_set_clr_mode() callback to fix the issue. Co-developed-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com> Link: https://lore.kernel.org/r/20221021084708.1109986-3-bchihi@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-07pinctrl: mediatek: common: add mt8365_set_clr_mode() callback for broken ↵Balsam CHIHI2-1/+22
SET/CLR modes On MT8365, the SET/CLR of the mode is broken and some pin modes won't be set correctly. Add mt8365_set_clr_mode() callback for such SoCs, so that instead of using the SET/CLR register, use the main R/W register to read/update/write the modes. Co-developed-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com> Link: https://lore.kernel.org/r/20221021084708.1109986-2-bchihi@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-26Merge tag 'intel-pinctrl-v6.1-2' of ↵Linus Walleij2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.1-2 * Add missing and remove unused headers in the pin control and GPIO drivers * Revise the pin control and GPIO headers
2022-10-24pinctrl: mediatek: Add missing header(s)Andy Shevchenko2-0/+8
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2022-10-17pinctrl: mt7986: allow configuring uart rx/tx and rts/cts separatelySam Shih1-7/+25
Some mt7986 boards use uart rts/cts pins as gpio, This patch allows to change rts/cts to gpio mode, but keep rx/tx as UART function. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Link: https://lore.kernel.org/r/20221008164807.113590-1-linux@fw-web.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-25pinctrl: mediatek: add mt8188 driverHui.Liu4-0/+3945
Add pinctrl driver support for MediaTek SoC mt8188. Signed-off-by: Hui.Liu <hui.liu@mediatek.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220818075012.20880-3-hui.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-27pinctrl: mediatek: mt8192: Fix compile warningsLinus Walleij1-9/+9
After applying patches I get these warnings: drivers/pinctrl/mediatek/pinctrl-mt8192.c:1302:56: warning: "/*" within comment [-Wcomment] drivers/pinctrl/mediatek/pinctrl-mt8192.c:1362:56: warning: "/*" within comment [-Wcomment] Something is wrong with the missing end-slashes. Add them. Cc: Guodong Liu <guodong.liu@mediatek.com> Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26pinctrl: mediatek: fix the pinconf definition of some GPIO pinsGuodong Liu1-60/+0
Remove pin definitions that do not support the R0 & R1 pinconfig property. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220624133700.15487-6-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26pinctrl: mediatek: dropping original advanced drive configuration functionGuodong Liu1-2/+0
Function bias_combo getter/setters already handle all cases advanced drive configuration, include drive for I2C related pins. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220624133700.15487-5-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26pinctrl: mediatek: add rsel setting on mt8192Guodong Liu1-0/+136
1. I2C pins's resistance value can be controlled by rsel register. This patch provides rsel (resistance selection) setting on mt8192. 2. Also add the missing pull type array for mt8192 to document the pull type of each pin and prevent invalid pull type settings. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220624133700.15487-4-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26pinctrl: mediatek: add drive for I2C related pins on mt8192Guodong Liu1-70/+26
This patch provides the advanced drive raw data setting version for I2C used pins on mt8192. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220624133700.15487-3-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-26pinctrl: mediatek: add generic driving setup property on mt8192Guodong Liu1-2/+2
1. The dt-binding expects that drive-strength arguments be passed in mA, but the driver was expecting raw values. And that this commit changes the driver so that it is aligned with the binding. 2. This commit provides generic driving setup, which support 2/4/6/8/10/12/14/16mA driving, original driver just set raw data setup setting when use drive-strength property. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220624133700.15487-2-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-28Merge tag 'pinctrl-v5.19-1' of ↵Linus Torvalds4-0/+2330
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Pretty big this time. Mostly due to (nice) Renesas refactorings. Core changes: - New helpers from Andy such as for_each_gpiochip_node() affecting both GPIO and pin control, improving a bunch of drivers in the process. - Pulled in Marc Zyngiers work to make IRQ chips immutable, and started to apply fixups on top. New drivers: - New driver for Marvell MVEBU 98DX2530. - New driver for Mediatek MT8195. - Support Qualcomm PMX65 and PM6125. - New driver for Qualcomm SC7280 LPASS pin control. - New driver for Rockchip RK3588. - New driver for NXP Freescale i.MXRT1170. - New driver for Mediatek MT6795 Helio X10. Improvements: - Several Aspeed G6 cleanups and non-critical fixes. - Thorought refactoring of some of the ever improving Renesas drivers. - Clean up Mediatek MT8192 bindings a bit. - PWM output and clock monitoring in the Ocelot LAN966x driver. - Thorough refactoring and cleanup of the Ralink drivers such as RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into proper sub-drivers" * tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits) pinctrl: apple: Use a raw spinlock for the regmap pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs pinctrl: intel: Fix kernel doc format, i.e. add return sections dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent' pinctrl: starfive: Make the irqchip immutable pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10 dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings pinctrl: freescale: Add i.MXRT1170 pinctrl driver support dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation dt-bindings: pinctrl: rockchip: increase max amount of device functions dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges' dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable' dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU pinctrl: qcom: spmi-gpio: Add pm6125 compatible dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl pinctrl: intel: make irq_chip immutable pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask() ...
2022-05-19pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10AngeloGioacchino Del Regno4-0/+2329
Add support for the MediaTek Helio X10 (MT6795) SoC's GPIO/pinmux controller. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220517083957.11816-3-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-02Merge tag 'v5.18-rc5' into develLinus Walleij1-0/+1
Merge in Linux 5.18-rc5 since new code to the STM32 driver depend in a non-trivial way on the fixes merged in -rc5. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-02pinctrl: mediatek: mt8365: fix IES control pinsMattijs Korpershoek1-1/+1
IES26 (BIT 16 of IES1_CFG_ADDR) controls the following pads: - PAD_I2S_DATA_IN (GPIO114) - PAD_I2S_LRCK (GPIO115) - PAD_I2S_BCK (GPIO116) The pinctrl table is wrong since it lists pins 114 to 112. Update the table with the correct values. Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC") Reported-by: Youngmin Han <Youngmin.Han@geappliances.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220426125714.298907-1-mkorpershoek@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-22pinctrl: mediatek: mt8195: enable driver on mtk platformsFabien Parent1-0/+1
Set the pinctrl driver as built-in by default if ARM64 and ARCH_MEDIATEK are enabled. Fixes: 6cf5e9ef362a ("pinctrl: add pinctrl driver on mt8195") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220327160813.2978637-1-fparent@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-21pinctrl: mediatek: moore: Fix build errorYueHaibing1-0/+1
If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails: drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config': pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce' drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq': pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq' Select EINT_MTK for PINCTRL_MTK_V2 to fix this. Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220409105958.37412-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-27pinctrl: mediatek: common-v1: fix semicolon.cocci warningskernel test robot1-1/+1
drivers/pinctrl/mediatek/pinctrl-mtk-common.c:171:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 156f721704b5 ("pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback") CC: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220322130308.GA21877@65fc916127a5 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-24pinctrl: mediatek: mt8186: Account for probe refactoringLinus Walleij1-6/+2
The new MT8186 drive came in and the probe calls were refactored at the same time. Fix it up. Fixes a build issue. Cc: Guodong Liu <guodong.liu@mediatek.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-17pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callbackAngeloGioacchino Del Regno9-103/+71
All of the MediaTek pinctrl drivers registering with pinctrl-mtk-common that are offering a .spec_ies_smt_set() callback are declaring their own function which is doing exactly the same on all drivers: calling mtk_pconf_spec_set_ies_smt_range() with their struct and a simple check. Commonize this callback by adding the ies and smt structure pointers to struct mtk_pinctrl_devdata and changing the callback signature to take it. Removing the callback and checking for the existance of the spec_smt and/or spec_ies data would allow us to staticize the function mtk_pconf_spec_set_ies_smt_range(), but this solution was avoided as to keep flexibility, as some SoCs may need to perform a very different operation compared to what this commonized function is doing. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220222111144.20796-6-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-17pinctrl: mediatek: common-v1: Commonize spec_pupd callbackAngeloGioacchino Del Regno10-75/+46
Reduce code size and duplication by using a common spec_pupd callback, which is possible to use on all of the pinctrl drivers that are using the v1 pinctrl-mtk-common code, with the exception of mt8135, which has a different handling compared to the others. Since the callback function signature was changed, this had to be propagated to pinctrl-mt8135's spec_pull_set(). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220222111144.20796-5-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-17pinctrl: mediatek: common-v1: Use common probe functionAngeloGioacchino Del Regno7-60/+15
Most of the mediatek pinctrl drivers are calling mtk_pctrl_init() and passing only a pointer to struct mtk_pinctrl_devdata, as the regmap handle it passed from device-tree, with the exception of mt6397. For all of the drivers that don't require passing a struct regmap pointer from a parent device, simplify the probe mechanism by assigning the required structure as match data and use mtk_pctrl_common_probe() as their probe function. While at it, also collapse the of_device_id entries to a single line, as they all fit in max 83 columns, which is acceptable. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220222111144.20796-4-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-17pinctrl: mediatek: common-v1: Add common probe functionAngeloGioacchino Del Regno2-0/+13
As a preparation to cleanup the probe mechanism of mediatek pinctrl drivers that are using the v1 controller, add a common probe function to this driver. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220222111144.20796-3-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-17pinctrl: mediatek: paris: Unify probe function by using OF match dataAngeloGioacchino Del Regno8-47/+19
All of the SoCs using Paris pinctrl are defining a custom probe function that is simply calling mtk_paris_pinctrl_probe() passing a pointer to the SoC specific mtk_pin_soc structure and nothing else. Simplify the probe mechanism across all pinctrl drivers that are using pinctrl-paris by passing the specific mtk_pin_soc as match data and using function mtk_paris_pinctrl_probe as a common probe function for all of them. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220222111144.20796-2-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: pinctrl-mtk-common: Simplify with dev_err_probe()AngeloGioacchino Del Regno1-14/+11
Use the dev_err_probe() helper to simplify error handling during probe. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220308100956.2750295-12-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: pinctrl-paris: Simplify with dev_err_probe()AngeloGioacchino Del Regno1-12/+7
Use the dev_err_probe() helper to simplify error handling during probe. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220308100956.2750295-11-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: pinctrl-moore: Simplify with dev_err_probe()AngeloGioacchino Del Regno1-16/+9
Use the dev_err_probe() helper to simplify error handling during probe. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220308100956.2750295-10-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: paris: Support generic PIN_CONFIG_DRIVE_STRENGTH_UAChen-Yu Tsai1-0/+99
Some of the MediaTek chips that utilize the Paris pinctrl driver library support a lower drive strength (<= 1mA) than the standard drive strength settings (2~16 mA) on certain pins. This was previously supported by the custom MTK_PIN_CONFIG_DRV_ADV parameter along with the "mediatek,drive-strength-adv" device tree property. The drive strength values for this hardware are 125, 250, 500, and 1000 mA, and can be readily described by the existing "drive-strength-microamp" property, which then gets parsed by the generic pinconf library into the parameter PIN_CONFIG_DRIVE_STRENGTH_UA. Add support for PIN_CONFIG_DRIVE_STRENGTH_UA while keeping the old custom parameter around for backward compatibility. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-9-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: paris: Rework mtk_pinconf_{get,set} switch/case logicChen-Yu Tsai1-83/+61
The current code deals with optional features by testing for the function pointers and returning -ENOTSUPP if it is not valid. This is done for multiple pin config settings and results in the code that handles the supporting cases to get indented by one level. This is aggrevated by the fact that some features require another level of conditionals. Instead of assigning the same error code in all unsupported optional feature cases, simply have that error code as the default, and break out of the switch/case block whenever a feature is unsupported, or an error is returned. This reduces indentation by one level for the useful code. Also replace the goto statements with break statements. The result is the same, as the gotos simply exit the switch/case block, which can also be achieved with a break statement. With the latter the intent is clear and easier to understand. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-8-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOsChen-Yu Tsai1-0/+3
Virtual GPIOs do not have any hardware state associated with them. Any attempt to read back hardware state for these pins result in error codes. Skip dumping extra pin config information for these virtual GPIOs. Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-7-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: paris: Drop extra newline in mtk_pctrl_show_one_pin()Chen-Yu Tsai1-8/+4
The caller of mtk_pctrl_show_one_pin() is responsible for printing the full line. mtk_pctrl_show_one_pin(), called through mtk_pctrl_dbg_show(), should only produce a string containing the extra information the driver wants included. Drop the extra newlines. Also unbreak the line that is only slightly over 80 characters to make it easier on the eye, and get rid of the braces now that each block in the conditionals is just one line. Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.") Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-6-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: paris: Fix pingroup pin config state readbackChen-Yu Tsai1-5/+3
mtk_pconf_group_get(), used to read back pingroup pin config state, simply returns a set of configs saved from a previous invocation of mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed in from the pinconf core, which does not match the current hardware state. Since the driver library is designed to have one pin per group, pass through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the current pin config state of the only pin in the group. Also drop the assignment of pin config state to the group. Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-5-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()Chen-Yu Tsai1-2/+1
For mtk_pinconf_get(), the "argument" argument is typically returned by pinconf_to_config_argument(), which holds the value for a given pinconf parameter. It certainly should not have the type of "enum pin_config_param", which describes the type of the pinconf parameter itself. Change the type to u32, which matches the return type of pinconf_to_config_argument(). Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-4-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readbackChen-Yu Tsai1-10/+6
When reading back pin bias settings, if the pin is not in the corresponding bias state, the function should return -EINVAL. Fix this in the mediatek-paris pinctrl library so that the read back state is not littered with bogus a "input bias disabled" combined with "pull up" or "pull down" states. Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-3-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_initMiaoqian Lin1-0/+2
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308071155.21114-1-linmq006@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: canonical rsel resistance selection propertyGuodong Liu1-1/+1
Change "mediatek,rsel_resistance_in_si_unit" to "mediatek,rsel-resistance-in-si-unit" Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature") Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Link: https://lore.kernel.org/r/20220216032124.28067-4-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-15pinctrl: add pinctrl driver on mt8186Guodong Liu4-0/+3465
This commit includes pinctrl driver for mt8186. Signed-off-by: Guodong Liu <guodong.liu@mediatek.com> Link: https://lore.kernel.org/r/20220216032124.28067-3-guodong.liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-01-12Merge tag 'pinctrl-v5.17-1' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "Core changes: - New standard enumerator and corresponding device tree bindings for output impedance pin configuration. (Implemented and used in the Renesas rzg2l driver.) - Cleanup of Kconfig and Makefile to be somewhat orderly and alphabetic. New drivers: - Samsung Exynos 7885 pin controller. - Ocelot LAN966x pin controller. - Qualcomm SDX65 pin controller. - Qualcomm SM8450 pin controller. - Qualcomm PM8019, PM8226 and PM2250 pin controllers. - NXP/Freescale i.MXRT1050 pin controller. - Intel Thunder Bay pin controller. Enhancements: - Introduction of the string library helper function "kasprintf_strarray()" and subsequent use in Rockchip, ST and Armada pin control drivers, as well as the GPIO mockup driver. - The Ocelot pin controller has been extensively rewritten to use regmap and other modern kernel infrastructure. - The Microchip SGPIO driver has been converted to use regmap. - The SPEAr driver had been converted to use regmap. - Substantial cleanups and janitorial on the Apple pin control driver that was merged for v5.16. - Janitorial to remove of_node assignments in the GPIO portions that anyway get this handled in the GPIO core. - Minor cleanups and improvements in several pin controllers" * tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits) pinctrl: imx: fix assigning groups names dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations pinctrl: bcm: ns: use generic groups & functions helpers pinctrl: imx: fix allocation result check pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt pinctrl: Propagate firmware node from a parent device dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings pinctrl: add one more "const" for generic function groups pinctrl: keembay: rework loops looking for groups names pinctrl: keembay: comment process of building functions a bit pinctrl: imx: prepare for making "group_names" in "function_desc" const ARM: dts: gpio-ranges property is now required pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED pinctrl: Get rid of duplicate of_node assignment in the drivers pinctrl-sunxi: don't call pinctrl_gpio_direction() pinctrl-bcm2835: don't call pinctrl_gpio_direction() pinctrl: bcm2835: Silence uninit warning pinctrl: Sort Kconfig and Makefile entries alphabetically pinctrl: Add Intel Thunder Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver ...
2021-12-16pinctrl: Get rid of duplicate of_node assignment in the driversAndy Shevchenko2-7/+5
GPIO library does copy the of_node from the parent device of the GPIO chip, there is no need to repeat this in the individual drivers. Remove these assignment all at once. For the details one may look into the of_gpio_dev_init() implementation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211214125855.33207-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-02pinctrl: mediatek: add a check for error in mtk_pinconf_bias_get_rsel()Dan Carpenter1-0/+2
All the other mtk_hw_get_value() calls have a check for "if (err)" so we can add one here as well. This silences a Smatch warning: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:819 mtk_pinconf_bias_get_rsel() error: uninitialized symbol 'pd'. Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211127140836.GB24002@kili Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 18:13:43 +0300