summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2022-01-24pinctrl: Place correctly CONFIG_PINCTRL_ST in the MakefileAndy Shevchenko1-1/+1
Keep Makefile entries ordered in the same way as Kconfig ones. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-01-12Merge tag 'pinctrl-v5.17-1' of ↵Linus Torvalds1-23/+25
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "Core changes: - New standard enumerator and corresponding device tree bindings for output impedance pin configuration. (Implemented and used in the Renesas rzg2l driver.) - Cleanup of Kconfig and Makefile to be somewhat orderly and alphabetic. New drivers: - Samsung Exynos 7885 pin controller. - Ocelot LAN966x pin controller. - Qualcomm SDX65 pin controller. - Qualcomm SM8450 pin controller. - Qualcomm PM8019, PM8226 and PM2250 pin controllers. - NXP/Freescale i.MXRT1050 pin controller. - Intel Thunder Bay pin controller. Enhancements: - Introduction of the string library helper function "kasprintf_strarray()" and subsequent use in Rockchip, ST and Armada pin control drivers, as well as the GPIO mockup driver. - The Ocelot pin controller has been extensively rewritten to use regmap and other modern kernel infrastructure. - The Microchip SGPIO driver has been converted to use regmap. - The SPEAr driver had been converted to use regmap. - Substantial cleanups and janitorial on the Apple pin control driver that was merged for v5.16. - Janitorial to remove of_node assignments in the GPIO portions that anyway get this handled in the GPIO core. - Minor cleanups and improvements in several pin controllers" * tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits) pinctrl: imx: fix assigning groups names dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations pinctrl: bcm: ns: use generic groups & functions helpers pinctrl: imx: fix allocation result check pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt pinctrl: Propagate firmware node from a parent device dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings pinctrl: add one more "const" for generic function groups pinctrl: keembay: rework loops looking for groups names pinctrl: keembay: comment process of building functions a bit pinctrl: imx: prepare for making "group_names" in "function_desc" const ARM: dts: gpio-ranges property is now required pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED pinctrl: Get rid of duplicate of_node assignment in the drivers pinctrl-sunxi: don't call pinctrl_gpio_direction() pinctrl-bcm2835: don't call pinctrl_gpio_direction() pinctrl: bcm2835: Silence uninit warning pinctrl: Sort Kconfig and Makefile entries alphabetically pinctrl: Add Intel Thunder Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver ...
2021-12-16pinctrl: starfive: Add pinctrl driver for StarFive SoCsEmil Renner Berthing1-0/+1
Add a combined pinctrl and GPIO driver for the JH7100 RISC-V SoC by StarFive Ltd. This is a test chip for their upcoming JH7110 SoC, which is said to feature only minor changes to these pinctrl/GPIO parts. For each "GPIO" there are two registers for configuring the output and output enable signals which may come from other peripherals. Among these are two special signals that are constant 0 and constant 1 respectively. Controlling the GPIOs from software is done by choosing one of these signals. In other words the same registers are used for both pin muxing and controlling the GPIOs, which makes it easier to combine the pinctrl and GPIO driver in one. I wrote the pinconf and pinmux parts, but the GPIO part of the code is based on the GPIO driver in the vendor tree written by Huan Feng with cleanups and fixes by Drew and me. Datasheet: https://github.com/starfive-tech/JH7100_Docs/blob/main/JH7100%20Data%20Sheet%20V01.01.04-EN%20(4-21-2021).pdf Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Co-developed-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Huan Feng <huan.feng@starfivetech.com> Co-developed-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2021-12-09pinctrl: Sort Kconfig and Makefile entries alphabeticallyAndy Shevchenko1-23/+24
Sort Kconfig and Makefile entries alphabetically for better maintenance in the future. While at it fix some style issues, such as: - "Say Y"/"Say yes"/"Say Yes" --> "Say Y" - "pullup/pulldown" --> "pull-up and pull-down" - wrong indentation Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211209113456.33977-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-12-09pinctrl: Add Intel Thunder Bay pinctrl driverLakshmi Sowjanya D1-0/+1
About Intel Thunder Bay: ----------------------- Intel Thunder Bay is a computer vision AI accelerator SoC based on ARM CPU. Pinctrl IP: ---------- The SoC has a customised pinmux controller IP which controls pin multiplexing and configuration. Thunder Bay pinctrl IP is not based on and have nothing in common with the existing pinctrl drivers. The registers used are incompatible with the existing drivers, so it requires a new driver. Add pinctrl driver to enable pin control support in the Intel Thunder Bay SoC. Co-developed-by: Kiran Kumar S <kiran.kumar1.s@intel.com> Signed-off-by: Kiran Kumar S <kiran.kumar1.s@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Link: https://lore.kernel.org/r/20211201072626.19599-3-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-27pinctrl: add pinctrl/GPIO driver for Apple SoCsJoey Gouly1-0/+1
This driver adds support for the pinctrl / GPIO hardware found on some Apple SoCs. Co-developed-by: Stan Skowronek <stan@corellium.com> Signed-off-by: Stan Skowronek <stan@corellium.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Acked-by: Hector Martin <marcan@marcan.st> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211026175815.52703-5-joey.gouly@arm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-11pinctrl: Add Intel Keem Bay pinctrl driverLakshmi Sowjanya D1-0/+1
About Intel Keem Bay: ------------------- Intel Keem Bay is a computer vision AI accelerator SoC based on ARM CPU. Documentation of Keem Bay: Documentation/vpu/vpu-stack-overview.rst. Pinctrl IP: ---------- The SoC has a customised pinmux controller IP which controls pin multiplexing and configuration. Keem Bay pinctrl IP is not based on and have nothing in common with the existing pinctrl drivers. The registers used are incompatible with the existing drivers, so it requires a new driver. Add pinctrl driver to enable pin control support in the Intel Keem Bay SoC. Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Reviewed-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210806142527.29113-3-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-22pinctrl: Add Xilinx ZynqMP pinctrl driver supportSai Krishna Potthuri1-0/+1
Adding pinctrl driver for Xilinx ZynqMP platform. This driver queries pin information from firmware and registers pin control accordingly. Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Link: https://lore.kernel.org/r/1619080202-31924-4-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-19pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driverDamien Le Moal1-0/+1
Add the pinctrl-k210.c pinctrl driver for the Canaan Kendryte K210 field programmable IO array (FPIOA) to allow configuring the SoC pin functions. The K210 has 48 programmable pins which can take any of 256 possible functions. This patch is inspired from the k210 pinctrl driver for the u-boot project and contains many direct contributions from Sean Anderson. The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210 SOC FPIOA DRIVER" with myself listed as maintainer for this driver. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-21pinctrl: remove ste u300 driverArnd Bergmann1-1/+0
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21pinctrl: remove coh901 driverArnd Bergmann1-1/+0
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120132045.2127659-5-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21pinctrl: remove sirf atlas/prima driversArnd Bergmann1-1/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21pinctrl: remove zte zx driverArnd Bergmann1-1/+0
The zte zx platform is getting removed, so this driver is no longer needed. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120132045.2127659-3-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-17Merge tag 'pinctrl-v5.11-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.11 kernel. Drivers, drivers and drivers. Not a single core change. Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot SoCs. As part of the modularization attempt, I applied one patch affecting the firmware subsystem as a functional (not syntactic/semantic) dependency and then it blew up in our face, so I had to revert it, bummer. It will come in later, through that subsystem, I guess. New drivers: - New driver for the Microchip Serial GPIO "SGPIO". - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver. New subdrivers: - Intel Lakefield subdriver. - Intel Elkhart Lake subdriver. - Intel Alder Lake-S subdriver. - Qualcomm MSM8953 subdriver. - Qualcomm SDX55 subdriver. - Qualcomm SDX55 PMIC subdriver. - Ocelot Luton SoC subdriver. - Ocelot Serval SoC subdriver. Modularization: - The Meson driver can now be built as modules. - The Qualcomm driver(s) can now be built as modules. Incremental improvements: - The Intel driver now supports pin configuration for GPIO-related configurations. - A bunch of Renesas PFC drivers have been augmented with support for QSPI pins, groups and functions. - Non-critical fixes to the irq handling in the Allwinner Sunxi driver" * tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl/spear: simplify the return expression of spear300_pinctrl_probe() pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1() dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5) pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings pinctrl: qcom-pmic-gpio: Add support for pmx55 dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error pinctrl: mtk: Fix low level output voltage issue pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() pinctrl: actions: pinctrl-s500: Constify s500_padinfo[] pinctrl: pinctrl-microchip-sgpio: Add OF config dependency pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver pinctrl: at91-pio4: add support for fewer lines on last PIO bank pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller ...
2020-12-08pinctrl: ralink: add a pinctrl driver for the rt2880 familySergio Paracuellos1-0/+1
These Socs have 1-3 banks of 8-32 gpios. Rather then setting the muxing of each pin individually, these socs have mux groups that when set will effect 1-N pins. Pin groups have a 2, 4 or 8 different muxes. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20201208075523.7060-3-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIOLars Povlsen1-0/+1
This adds a pinctrl driver for the Microsemi/Microchip Serial GPIO (SGPIO) device used in various SoC's. The driver is added as a pinctrl driver, albeit only having just GPIO support currently. The hardware supports other functions that will be added following. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Link: https://lore.kernel.org/r/20201113145151.68900-3-lars.povlsen@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-22Merge tag 'renesas-pinctrl-for-v5.10-tag1' of ↵Linus Walleij1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.10 - Add CAN and USB1 PWEN pin groups on R-Car H2 and RZ/G1, - Three more conversion of DT bindings to json-schema, - Group all Renesas pinctrl drivers and improve visual Kconfig structure, - Rename drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas, - Minor fixes and improvements.
2020-09-15pinctrl: Rename sh-pfc to renesasGeert Uytterhoeven1-1/+1
The drivers/pinctrl/sh-pfc subdirectory was originally created to group pin control drivers for various Renesas SuperH and SH-Mobile platforms. However, the name "sh-pfc" no longer reflects its contents, as the directory now contains pin control drivers for Renesas SuperH, ARM32, and ARM64 SoCs. Hence rename the subdirectory from drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas, and the related Kconfig symbol from PINCTRL_SH_PFC to PINCTRL_RENESAS. Rename the git branch in MAINTAINERS, too, for consistency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-3-geert+renesas@glider.be
2020-09-15pinctrl: sh-pfc: Collect Renesas related CONFIGs in one placeKuninori Morimoto1-3/+0
Renesas related pinctrl CONFIGs are located in many places, which is confusing. This patch collects them into the same place, grouped in a new "Renesas pinctrl drivers" menu. This patch also moves pinctrl-rz{a1,a2,n1}.c into the sh-pfc folder. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87k0xoy4r7.wl-kuninori.morimoto.gx@renesas.com [geert: Update path in MAINTAINERS] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-12pinctrl: visconti: Add Toshiba Visconti SoCs pinctrl supportNobuhiro Iwamatsu1-0/+1
Add pinctrl support to Toshiba Visconti SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Link: https://lore.kernel.org/r/20200909204336.2558-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-16pinctrl: mcp23s08: Split to three parts: core, I²C, SPIAndy Shevchenko1-0/+2
Split the driver to three parts: core, I²C, SPI. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200407173849.43628-9-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-19pinctrl: da9062: add driver supportMarco Felsch1-0/+1
The DA9062 is a mfd pmic device which supports 5 GPIOs. The GPIOs can be used as input, output or have a special use-case. The patch adds the support for the normal input/output use-case. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200108104746.1765-4-m.felsch@pengutronix.de Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: Add pinmux & GPIO controller driver for a new SoCRahul Tanwar1-0/+1
Intel Lightning Mountain SoC has a pinmux controller & GPIO controller IP which controls pin multiplexing & configuration including GPIO functions selection & GPIO attributes configuration. This IP is not based on & does not have anything in common with Chassis specification. The pinctrl drivers under pinctrl/intel/* are all based upon Chassis spec compliant pinctrl IPs. So this driver doesn't fit & can not use pinctrl framework under pinctrl/intel/* and it requires a separate new driver. Add a new GPIO & pin control framework based driver for this IP. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/33e649758b70490f01724a887c490d5008c7656d.1573797249.git.rahul.tanwar@linux.intel.com Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-14Merge tag 'mfd-next-5.2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
2019-05-10pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driverAmelie Delaunay1-0/+1
This patch adds pinctrl/GPIO driver for STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander. STMFX is an I2C slave controller, offering up to 24 GPIOs. The driver relies on generic pin config interface to configure the GPIOs. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-03pinctrl: Add pinctrl support for BM1880 SoCManivannan Sadhasivam1-0/+1
Add pinctrl support for Bitmain BM1880 SoC. The driver only handles pinmuxing as the SoC is not capable of handling pinconf. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-23pinctrl: Add RZ/A2 pin and gpio controllerChris Brandt1-0/+1
Adds support for the pin and gpio controller found in R7S9210 (RZ/A2) SoCs. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-10-10Merge tag 'sh-pfc-for-v4.20-tag3' of ↵Linus Walleij1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.20 (take three) - Add support for the new RZ/N1D (R9A06G032) and RZ/N1S (R9A06G033) SoCs, - Add INTC-EX pin groups on R-Car E3.
2018-10-02pinctrl: renesas: Renesas RZ/N1 pinctrl driverPhil Edworthy1-0/+1
This provides a pinctrl driver for the Renesas RZ/N1 device family. Based on a patch originally written by Michel Pollet at Renesas. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-08-29pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driverTomer Maimon1-0/+1
Add Nuvoton BMC NPCM750/730/715/705 Pinmux and GPIO controller driver. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> [Add back select GPIO_GENERIC] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-27Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', ↵Lee Jones1-0/+1
'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged Immutable branch (mfd, chrome) due for the v4.19 window Immutable Branch which moves the cros_ec_i2c and cros_ec_spi transport drivers from mfd to platform/chrome. Changes in arm are a simple rename in defconfigs. Change in input is a rename in help text.
2018-06-05pinctrl: madera: Add driver for Cirrus Logic Madera codecsRichard Fitzgerald1-0/+1
These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-02pinctrl: actions: Add Actions S900 pinctrl driverManivannan Sadhasivam1-0/+1
Add pinctrl driver for Actions Semi S900 SoC. The driver supports pinctrl, pinmux and pinconf functionalities through a range of registers common to both gpio driver and pinctrl driver. Pinmux functionality is available only for the pin groups while the pinconf functionality is available for both pin groups and individual pins. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-03Merge tag 'pinctrl-v4.17-1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk updates from Linus Walleij: "New drivers: - Qualcomm SDM845: this is their new flagship SoC platform which seems to be targeted at premium mobile handsets. - Renesas R-Car M3-N SoC. - Renesas R8A77980 SoC. - NXP (ex Freescale) i.MX 6SLL SoC. - Mediatek MT2712 SoC. - Allwinner H6 SoC. Improvements: - Uniphier adds a few new functions and pins. - Renesas refactorings and additional pin definitions. - Improved pin groups for Axis Artpec6. Cleanup: - Drop the TZ1090 drivers. This platform is no longer maintained and is being deleted. - Drop ST-Ericsson U8540/U9540 support as this was never productified. - Overall minor fixes and janitorial" * tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: uniphier: add UART hardware flow control pin-mux settings pinctrl: sunxi: add support for the Allwinner H6 main pin controller pinctrl: sunxi: change irq_bank_base to irq_bank_map pinctrl: sunxi: introduce IRQ bank conversion function pinctrl: sunxi: refactor irq related register function to have desc pinctrl: msm8998: Remove owner assignment from platform_driver pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings pinctrl/amd: poll InterruptEnable bits in enable_irq pinctrl: ocelot: fix gpio direction pinctrl: mtk: fix check warnings. pintcrl: mtk: support bias-disable of generic and special pins simultaneously pinctrl: add mt2712 pinctrl driver pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0 pinctrl: imx: Add pinctrl driver support for imx6sll dt-bindings: imx: update pinctrl doc for imx6sll pinctrl: intel: Implement intel_gpio_get_direction callback pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency pinctrl: mediatek: mtk-common: use true and false for boolean values pinctrl: sunxi: always look for apb block ...
2018-03-26pinctrl: remove adi2/blackfin driversArnd Bergmann1-3/+0
The blackfin architecture is getting removed, so these are now obsolete. Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-01pinctrl: Drop TZ1090 driversJames Hogan1-2/+0
Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 pinctrl drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-09pinctrl: Add Microsemi Ocelot SoC driverAlexandre Belloni1-0/+1
The Microsemi Ocelot SoC has a few pins that can be used as GPIOs or take multiple other functions. Add a driver for the pinmuxing and the GPIOs. There is currently no support for interrupts. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: mediatek: add pinctrl driver for MT7622 SoCSean Wang1-1/+1
Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-07pinctrl: move gpio-axp209 to pinctrlQuentin Schulz1-0/+1
To prepare the driver for the upcoming pinctrl features, move the GPIO driver AXP209 from GPIO to pinctrl subsystem. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-08-31pinctrl: sprd: Add Spreadtrum pin control driverBaolin Wang1-0/+1
This patch adds the pin control driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-21pinctrl: Add pinctrl driver for the RK805 PMICJoseph Chen1-0/+1
RK805 is one of Rockchip PMICs family, it has 2 output only GPIOs. This driver is also designed for other Rockchip PMICs to expend. Different PMIC maybe have different pin features, for example, RK816 has one pin which can be used for TS or GPIO(input/out). The mainly difference between PMICs pins are pinmux, direction and output value, that is 'struct rk805_pin_config'. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-14pinctrl: add a Gemini SoC pin controllerLinus Walleij1-0/+1
This adds a pin control (only multiplexing) driver for the Gemini SoC so we can sort out this complex platform in an orderly manner. This driver will detect the chip/package version as SL3512 or SL3516 (also known as CS3512 and CS3516 etc) and register the apropriate pin set. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29Merge tag 'sh-pfc-for-v4.13-tag2' of ↵Linus Walleij1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.13 (take two) - Add SCIF1 and SCIF2 pin groups for R-Car V2H, - Add EtherAVB, DU parallel RGB output, and PWM pin groups for R-Car H3 ES2.0, - Add pin and gpio controller support for RZ/A1.
2017-06-23pinctrl: Renesas RZ/A1 pin and gpio controllerJacopo Mondi1-0/+1
Add combined gpio and pin controller driver for Renesas RZ/A1 r7s72100 SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-05-23Merge branch 'mcp23s08' into develLinus Walleij1-0/+1
2017-05-23gpio: mcp23s08: move to pinctrlSebastian Reichel1-0/+1
This moves the mcp23s08 driver from gpio to pinctrl. Actual pinctrl support for configuration of the pull-up resistors follows in its own patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22Merge branch 'ingenic' into develLinus Walleij1-0/+1
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 05:50:31 +0300