summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2023-10-22Merge tag 'phy-fixes-6.6' of ↵Linus Torvalds9-48/+57
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - mapphone-mdm6600 runtime pm & pinctrl handling fixes - Qualcomm qmp usb pcs register fixes, qmp pcie register size warning fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg check, qmp combo fix for 8550 power config register - realtek usb fix for debugfs_create_dir() and kconfig dependency * tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: realtek: Realtek PHYs should depend on ARCH_REALTEK phy: qualcomm: Fix typos in comments phy: qcom-qmp-combo: initialize PCS_USB registers phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1 phy: qcom: m31: Remove unwanted qphy->vreg is NULL check phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir() phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR() dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p phy: qcom-qmp-usb: initialize PCS_USB registers phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins phy: mapphone-mdm6600: Fix runtime PM for remove phy: mapphone-mdm6600: Fix runtime disable on probe
2023-10-06phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registersVladimir Oltean1-0/+9
The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06phy: lynx-28g: lock PHY while performing CDR lock workaroundVladimir Oltean1-3/+6
lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset the lane receiver if the CDR has not locked onto bit transitions in the RX stream. But the PHY consumer may do stuff with the PHY simultaneously, and that isn't okay. Block concurrent generic PHY calls by holding the PHY mutex from this workqueue. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06phy: lynx-28g: cancel the CDR check work item on the remove pathIoana Ciornei1-0/+9
The blamed commit added the CDR check work item but didn't cancel it on the remove path. Fix this by adding a remove function which takes care of it. Fixes: 8f73b37cf3fb ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-29phy: realtek: Realtek PHYs should depend on ARCH_REALTEKGeert Uytterhoeven1-0/+5
The Realtek SoC USB2 and USB3 PHY Transceivers are only present on Realtek Digital Home Center (DHC) RTD series SoCs. Hence add a dependency on ARCH_REALTEK, to prevent asking the user about these drivers when configuring a kernel without Realtek SoC support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/2892527cac9af6fa8f5e7b8daeffd7d4351fde68.1692113167.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qualcomm: Fix typos in commentsBo Liu1-1/+1
Fix typo in the description of the 'succesfully'. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230912114646.8452-1-liubo03@inspur.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-combo: initialize PCS_USB registersKonrad Dybcio1-0/+4
Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Reported-by: Adrien Thierry <athierry@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230829-topic-8550_usbphy-v3-2-34ec434194c5@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1Konrad Dybcio2-2/+3
There are two instances of the POWER_STATE_CONFIG1 register: one in the PCS space and another one in PCS_USB. The downstream init sequence pokes the latter one while we've been poking the former one (and misnamed it as the latter one, impostor!). Fix that up to avoid UB. Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230829-topic-8550_usbphy-v3-1-34ec434194c5@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom: m31: Remove unwanted qphy->vreg is NULL checkVaradarajan Narayanan1-2/+1
Fix the following Smatch complaint: drivers/phy/qualcomm/phy-qcom-m31.c:175 m31usb_phy_init() warn: variable dereferenced before check 'qphy->vreg' (see line 167) drivers/phy/qualcomm/phy-qcom-m31.c 166 167 ret = regulator_enable(qphy->vreg); ^^^^^^^^^^ Unchecked dereference 168 if (ret) { 169 dev_err(&phy->dev, "failed to enable regulator, %d\n", ret); 170 return ret; 171 } 172 173 ret = clk_prepare_enable(qphy->clk); 174 if (ret) { 175 if (qphy->vreg) ^^^^^^^^^^ Checked too late 176 regulator_disable(qphy->vreg); 177 dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); Since the phy will not get registered if qphy->vreg is NULL, this check is not needed. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-phy/cbd26132-c624-44b7-a073-73222b287338@moroto.mountain/T/#u Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/1694069452-3794-1-git-send-email-quic_varada@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()Jinjie Ruan2-16/+4
Both debugfs_create_dir() and debugfs_create_file() return ERR_PTR and never return NULL. As Greg suggested, this patch removes the error checking for debugfs_create_dir in phy-rtk-usb2.c and phy-rtk-usb3.c. This is because the DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. The debugfs APIs have a IS_ERR() judge in start_creating() which can handle it gracefully. So these checks are unnecessary. Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY") Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230901075231.1368947-1-ruanjinjie@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to staticYang Yingliang1-1/+1
m31_ipq5332_regs is only used in phy-qcom-m31.c now, change it to static. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20230824092356.1154839-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()Yang Yingliang1-1/+1
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails. Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20230824091345.1072650-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775pAdrien Thierry1-5/+15
For sc8280xp and sa8775p, PCS and PCS_USB initialization data is described in the same table, thus the pcs_usb offset is not being applied during initialization of PCS_USB registers. Fix this by adding the appropriate pcs_usb_tbl tables. Fixes: 8bd2d6e11c99 ("phy: qcom-qmp: Add SA8775P USB3 UNI phy") Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Adrien Thierry <athierry@redhat.com> Link: https://lore.kernel.org/r/20230828152353.16529-3-athierry@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-21phy: qcom-qmp-usb: initialize PCS_USB registersAdrien Thierry1-0/+4
Currently, PCS_USB registers that have their initialization data in a pcs_usb_tbl table are never initialized. Fix that. Fixes: fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") Signed-off-by: Adrien Thierry <athierry@redhat.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230828152353.16529-2-athierry@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-14phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pinsTony Lindgren1-17/+12
Looks like the driver sleep pins configuration is unusable. Adding the sleep pins causes the usb phy to not respond. We need to use the default pins in probe, and only set sleep pins at phy_mdm6600_device_power_off(). As the modem can also be booted to a serial port mode for firmware flashing, let's make the pin changes limited to probe and remove. For probe, we get the default pins automatically. We only need to set the sleep pins in phy_mdm6600_device_power_off() to prevent the modem from waking up because the gpio line glitches. If it turns out that we need a separate state for phy_mdm6600_power_on() and phy_mdm6600_power_off(), we can use the pinctrl idle state. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: 2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-14phy: mapphone-mdm6600: Fix runtime PM for removeTony Lindgren1-0/+1
Otherwise we will get an underflow on remove. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-14phy: mapphone-mdm6600: Fix runtime disable on probeTony Lindgren1-3/+5
Commit d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") caused a regression where we now unconditionally disable runtime PM at the end of the probe while it is only needed on errors. Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-09-03Merge tag 'phy-for-6.6' of ↵Linus Torvalds106-2236/+4568
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "As usual a couple of new drivers, a bunch of new device support and few updates to existing drivers New Support: - Starfive dphy rx, JH7110 usb and pcie support - Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support - Qualcomm sa8775p PCIe support, M31 USB PHY driver - Samsung Exynos850 usb support Updates: - Mediatek dsi driver clock updates - Qualcomm sm8150 combo phy with reworking of qmp pcie driver - Xilinx zynqmp runtime PM support" * tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits) phy: exynos5-usbdrd: Add Exynos850 support phy: exynos5-usbdrd: Add 26MHz ref clk support phy: exynos5-usbdrd: Make it possible to pass custom phy ops dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support phy: qcom-qmp-combo: fix clock probing phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs phy: qcom-qmp-pcie: populate offsets configuration phy: qcom-qmp-pcie: simplify clock handling phy: qcom-qmp-pcie: keep offset tables sorted phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed phy: qcom: Introduce M31 USB PHY driver dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy phy: rockchip: inno-dsidphy: Add rv1126 support dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126 dt-bindings: phy: mediatek,tphy: allow simple nodename pattern phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning ...
2023-09-01Merge tag 'usb-6.6-rc1' of ↵Linus Torvalds6-0/+2130
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt / PHY driver updates from Greg KH: "Here is the big set of USB, Thunderbolt, and PHY driver updates for 6.6-rc1. Included in here are: - PHY driver additions and cleanups - Thunderbolt minor additions and fixes - USB MIDI 2 gadget support added - dwc3 driver updates and additions - Removal of some old USB wireless code that was missed when that codebase was originally removed a few years ago, cleaning up some core USB code paths - USB core potential use-after-free fixes that syzbot from different people/groups keeps tripping over - typec updates and additions - gadget fixes and cleanups - loads of smaller USB core and driver cleanups all over the place Full details are in the shortlog. All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) platform/chrome: cros_ec_typec: Configure Retimer cable type tcpm: Avoid soft reset when partner does not support get_status usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: set initial svdm version based on pd revision USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) usb: dwc2: add pci_device_id driver_data parse support usb: gadget: remove max support speed info in bind operation usb: gadget: composite: cleanup function config_ep_by_speed_and_alt() usb: gadget: config: remove max speed check in usb_assign_descriptors() usb: gadget: unconditionally allocate hs/ss descriptor in bind operation usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind() usb: gadget: add a inline function gether_bitrate() usb: gadget: use working speed to calcaulate network bitrate and qlen dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support usb: dwc3: exynos: Add support for Exynos850 variant usb: gadget: udc-xilinx: fix incorrect type in assignment warning usb: gadget: udc-xilinx: fix cast from restricted __le16 warning usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning USB: dwc2: hande irq on dead controller correctly ...
2023-08-31Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ...
2023-08-22clk: Annotate struct clk_hw_onecell_data with __counted_byKees Cook1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Qin Jian <qinjian@cqplus1.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Samuel Holland <samuel@sholland.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-sunxi@lists.linux.dev Cc: linux-phy@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-22phy: exynos5-usbdrd: Add Exynos850 supportSam Protsenko1-0/+169
Implement Exynos850 USB 2.0 DRD PHY controller support. Exynos850 has quite a different PHY controller than Exynos5 compatible controllers, but it's still possible to implement it on top of existing exynos5-usbdrd driver infrastructure. Only UTMI+ (USB 2.0) PHY interface is implemented, as Exynos850 doesn't support USB 3.0. Only two clocks are used for this controller: - phy: bus clock, used for PHY registers access - ref: PHY reference clock (OSCCLK) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-7-semen.protsenko@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: exynos5-usbdrd: Add 26MHz ref clk supportSam Protsenko1-0/+4
Modern Exynos chips (like Exynos850) might have 26 MHz OSCCLK external clock, which is also used as a PHY reference clock. For some USB PHY controllers (e.g USB DRD PHY block on Exynos850) there is no need to set the refclk frequency at all (and corresponding bits in CLKRSTCTRL[7:5] are marked RESERVED), so that value won't be set in the driver. But even in that case, 26 MHz support still has to be added, otherwise exynos5_rate_to_clk() fails, which leads in turn to probe error. Add the correct value for 26MHz refclk to make it possible to add support for new Exynos USB DRD PHY controllers. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-6-semen.protsenko@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: exynos5-usbdrd: Make it possible to pass custom phy opsSam Protsenko1-2/+7
Provide a way to use different PHY ops for different chips. Right now all chips are using exynos5_usbdrd_phy_ops, but it won't always be the case. For example, Exynos850 has very different USB PHY block, so there will be another PHY ops implementation for that chip. No functional change. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-5-semen.protsenko@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-combo: fix clock probingDmitry Baryshkov1-6/+6
During rebase of qcom-qmp-combo series a call to devm_clk_bulk_get_all() got moved by git from qmp_combo_parse_dt_legacy() to phy_dp_clks_register(). This doesn't have any serious effect, since the clocks will be set in both legacy and non-legacy paths. However let's move it back to place anyway, to prevent the driver from fetching clocks twice. Fixes: 28e265bf84a8 ("phy: qcom-qmp-combo: simplify clock handling") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820235813.562284-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYsDmitry Baryshkov1-0/+6
Reuse sm8250 configuration to add support for both single lane and dual lane PCIe PHYs on the Qualcomm SM8150 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: populate offsets configurationDmitry Baryshkov1-0/+74
Populate offsets configuration for the rest of UFS PHYs to make it possible to switch them to the new (single-node) bindings style. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: simplify clock handlingDmitry Baryshkov1-71/+7
For some of existing PHYs for new binding we are going to change refgen to more correct "rchng". Rather than introducing additional code to handle legacy vs current bindings (and clock names), use devm_clk_bulk_get_optional(). Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: keep offset tables sortedDmitry Baryshkov1-11/+11
In order to simplify adding new PHY configurations, keep register offset structs sorted by the version. Fixes: a05b6d5135ec ("phy: qcom-qmp-pcie: add support for sa8775p") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom-qmp-pcie: drop ln_shrd from v5_20 configDmitry Baryshkov1-1/+0
There is no shared lane config for v5.20 PHYs, it is only present on SM8550 gen4x2. Fixes: a05b6d5135ec ("phy: qcom-qmp-pcie: add support for sa8775p") Cc: Mrinmay Sarkar <quic_msarkar@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failedAlexander Stein1-1/+1
This adds an error message if getting vbus failed for some reason, -EPROBE_DEFER is handled appropriately as well and adds a nice information to debugfs. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230816080256.611380-1-alexander.stein@ew.tq-group.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: qcom: Introduce M31 USB PHY driverVaradarajan Narayanan3-0/+306
Add the M31 USB2 phy driver for the USB M31 PHY (https://www.m31tech.com) found in Qualcomm IPQ5018, IPQ5332 SoCs. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/c8821bb0124a54cc774a2ff7b9c40df28eb7711e.1691999761.git.quic_varada@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: rockchip: inno-dsidphy: Add rv1126 supportJagan Teki1-0/+3
Add support for Rockchip RV1126 DSI-DPHY. The existing 2.5GHz phy timing table added for RK3568 is working as it is for RV1126 as well. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20230731110012.2913742-5-jagan@edgeble.ai Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski1-1/+1
'soc_id' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: phy-meson-g12a-usb2.c:322:17: error: cast to smaller integer type 'enum meson_soc_id' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230810091310.70231-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski1-1/+1
'version' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: phy-pxa-usb.c:299:26: error: cast to smaller integer type 'enum pxa_usb_phy_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810111958.205705-4-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11phy: broadcom: sr-usb: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski1-1/+1
'version' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: phy-bcm-sr-usb.c:314:13: error: cast to smaller integer type 'enum bcm_usb_phy_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810111958.205705-3-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11phy: broadcom: ns-usb3: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski1-1/+1
'family' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: drivers/phy/broadcom/phy-bcm-ns-usb3.c:209:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810111958.205705-2-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11phy: broadcom: sata: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski1-1/+1
'version' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: phy-brcm-sata.c:775:19: error: cast to smaller integer type 'enum brcm_sata_phy_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230810111958.205705-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11phy: qcom: qmp-ufs: add missing offsets to sm8150 configurationDmitry Baryshkov1-0/+2
The conversion commit 7559e7572c03 ("phy: Explicitly include correct DT includes") misses offsets configuration for sm8150 (most likely it was developed separately from the series adding HS G4 support and was not adapted for the sm8150/sm8250 configuration split). Add missing offsets to sm8150_ufsphy_cfg. Fixes: 7559e7572c03 ("phy: Explicitly include correct DT includes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230731111009.3998089-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-04phy: realtek: usb: add the error handler for nvmem_cell_readStanley Chang2-9/+12
There are following smatch warning: drivers/phy/realtek/phy-rtk-usb2.c:901 get_phy_data_by_efuse() error: 'buf' dereferencing possible ERR_PTR() drivers/phy/realtek/phy-rtk-usb2.c:942 get_phy_data_by_efuse() error: 'buf' dereferencing possible ERR_PTR() drivers/phy/realtek/phy-rtk-usb3.c:460 get_phy_data_by_efuse() error: 'buf' dereferencing possible ERR_PTR() The nvmem_cell_read may fail to read. So, driver must handle failure cases. Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY") Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-phy/e7ff2870-c30c-4d8d-a7a9-d2d6a4962eb5@kadam.mountain/ Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20230801071509.20096-1-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-31Merge 6.5-rc4 into usb-nextGreg Kroah-Hartman4-31/+53
We need the USB fixes in here for testing and for other patches to be applied on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-30phy: realtek: usb: phy-rtk-usb2 and phy-rtk-usb3 needs USB_COMMONStanley Chang1-0/+2
When USB_COMMON are not enabled, phy-rtk-usb2 and phy-rtk-usb3 suffers a build error due to a missing usb_debug_root that is provided by CONFIG_USB_COMMON, so make the driver select USB_COMMON. or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb2.o: in function `create_phy_debug_root': >> drivers/phy/realtek/phy-rtk-usb2.c:715: undefined reference to `usb_debug_root' >> or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb2.c:715: undefined reference to `usb_debug_root' or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb3.o: in function `create_phy_debug_root': >> drivers/phy/realtek/phy-rtk-usb3.c:349: undefined reference to `usb_debug_root' >> or1k-linux-ld: drivers/phy/realtek/phy-rtk-usb3.c:349: undefined reference to `usb_debug_root' Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY") Fixed: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307290733.weSlHrGp-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202307291022.3pVeTR9z-lkp@intel.com/ Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20230729053029.6226-1-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-26phy: starfive: StarFive PHYs should depend on ARCH_STARFIVEGeert Uytterhoeven1-0/+4
The various StarFive PHYs are only present on StarFive SoCs. Hence add a dependency on ARCH_STARFIVE, to prevent asking the user about these drivers when configuring a kernel without StarFive SoC support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com> Link: https://lore.kernel.org/r/12097f6107a18e2f7cfb80f47ac7b27808e062c4.1690300076.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-26phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHYStanley Chang3-0/+778
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB controller. Added the driver to drive the USB 3.0 PHY transceivers. Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20230725033318.8361-3-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-26phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHYStanley Chang5-0/+1347
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB controller. Added the driver to drive the USB 2.0 PHY transceivers. Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20230725033318.8361-2-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25phy: starfive: make phys depend on HAS_IOMEMVinod Koul1-0/+1
the startfive phy drivers use devm_platform_ioremap_resource() which on some archs (s390) is not present. So make the drivers depend on HAS_IOMEM Fixes: f8aa660841bc ("phy: starfive: Add mipi dphy rx support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307250509.oeudxG28-lkp@intel.com/ Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230725063856.482696-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24phy: qcom-qmp-combo: add qcom,sc7280-qmp-usb3-dp-phy compat entryDmitry Baryshkov1-0/+4
Add separate device entry for Combo USB+DP QMP PHY on sc7280 platform. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24phy: qcom-qmp-combo: populate offsets for all combo PHYsDmitry Baryshkov1-0/+8
In order to support newer style bindings for combo PHYs, populate offsets for all Combo QMP PHY configurations. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24phy: qcom-qmp-combo: simplify clock handlingDmitry Baryshkov1-44/+23
For the existing PHYs for new binding we are going to drop ref_clk_src clock and always use ref clock. Rather than introducing additional code to handle legacy vs current bindings (and clock names), use devm_clk_bulk_get_optional() when new bindings are used and devm_clk_bulk_get_all() when legacy bindings are in place. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230711120916.4165894-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24phy: Remove duplicated include in xusb.cYang Li1-1/+0
./drivers/phy/tegra/xusb.c: linux/platform_device.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5930 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230719003614.5506-1-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 13:20:40 +0300