summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2022-09-22PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridgeMaciej W. Rozycki1-0/+11
When pci_assign_resource() is unable to assign resources to a BAR, it uses pci_revert_fw_address() to fall back to a firmware assignment (if any). Previously pci_revert_fw_address() assumed all addresses could reach the device, but this is not true if the device is below a bridge that only forwards addresses within its windows. This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS did not assign valid addresses to several bridges and USB devices: pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff] pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff] pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff] pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable pci 0000:06:08.0: USB UHCI 1.1 pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable pci 0000:06:08.1: USB UHCI 1.1 pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window During the first pass of assigning unassigned resources, there was not enough I/O space available, so we couldn't assign the 06:08.0 BAR and reverted to the firmware assignment (still unreachable). Reverting the 06:08.1 assignment failed because it conflicted with 06:08.0: pci 0000:00:11.0: bridge window [io 0xe000-0xefff] pci 0000:01:00.0: no space for bridge window [io size 0x2000] pci 0000:02:02.0: no space for bridge window [io size 0x1000] pci 0000:05:00.0: no space for bridge window [io size 0x1000] pci 0000:06:08.0: BAR 4: no space for [io size 0x0020] pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: no space for [io size 0x0020] pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff] pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff] A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR, but left the 06:08.0 BAR alone, so the UHCI device was still unusable: pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f] ... uhci_hcd 0000:06:08.0: host system error, PCI problems? uhci_hcd 0000:06:08.0: host controller process error, something bad happened! uhci_hcd 0000:06:08.0: host controller halted, very bad! uhci_hcd 0000:06:08.0: HCRESET not completed yet! uhci_hcd 0000:06:08.0: HC died; cleaning up If the address assigned by firmware is not reachable because it's not within upstream bridge windows, fail instead of assigning the unusable address from firmware. [bhelgaas: commit log, use pci_upstream_bridge()] Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263 Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.35+
2022-09-21PCI: Fix typo in pci_scan_child_bus_extend()Mika Westerberg1-1/+1
Should be 'if' not 'of'. Fix this. Link: https://lore.kernel.org/r/20220905080232.36087-7-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Fix whitespace and indentationMika Westerberg2-3/+1
Drop two empty lines from pci_scan_child_bus_extend() and correct indentation in pci_bridge_distribute_available_resources() to better follow the kernel coding style. No functional impact. Link: https://lore.kernel.org/r/20220905080232.36087-6-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Distribute available resources for root buses, tooMika Westerberg1-1/+61
Previously we distributed spare resources only upon hot-add, so if the initial root bus scan found devices that had not been fully configured by the BIOS, we allocated only enough resources to cover what was then present. If some of those devices were hotplug bridges, we did not leave any additional resource space for future expansion. Distribute the available resources for root buses, too, to make this work the same way as the normal hotplug case. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Link: https://lore.kernel.org/r/20220905080232.36087-5-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Move pci_assign_unassigned_root_bus_resources()Mika Westerberg1-113/+113
We need to be able to call pci_bridge_distribute_available_resources() from this function so move it accordingly to avoid need for forward declaration. No functional impact. Link: https://lore.kernel.org/r/20220905080232.36087-4-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Pass available buses even if the bridge is already configuredMika Westerberg1-2/+3
If some part of the PCI topology is already configured (by the boot firmware) but not all, and it includes hotplug bridges, we may need to extend the bus resources of those bridges to accommodate any future hotplugs, in the same way we already do with the normal hotplug case. Pass the available buses to pci_scan_child_bus_extend() even when the bridge in question is already configured so the bus allocation code can use these available buses to extend the possible hotplug bridges below. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Link: https://lore.kernel.org/r/20220905080232.36087-3-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Fix used_buses calculation in pci_scan_child_bus_extend()Mika Westerberg1-2/+2
pci_scan_bridge_extend() returns the subordinate bus number needed to cover all the buses below a bridge. pci_scan_child_bus_extend() computes the number of buses to reserve by comparing that with the current max bus number. Previously it did the subtraction in the wrong order, so 'used_buses' was nonsense. Subtract 'max' from 'cmax' as is done for the similar pci_scan_bridge_extend() call in the following block. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Fixes: 3374c545c27c ("PCI: Account for all bridges on bus when distributing bus numbers") Link: https://lore.kernel.org/r/20220905080232.36087-2-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-19PCI/P2PDMA: Use for_each_pci_dev() helperYang Yingliang1-1/+1
Use for_each_pci_dev() instead of open-coding it. No functional change. Link: https://lore.kernel.org/r/20220916140329.679633-1-yangyingliang@huawei.com Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2022-09-16PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridgePali Rohár1-0/+3
Register with Subsystem Device/Vendor ID is at offset 0x2c. Export it via the emulated bridge to enable support for the Subsystem Device/Vendor ID - by reading it in the PCI controller config space and storing it in the emulated bridge control structures, so that it is exposed in the respective PCI capability. After this change Subsystem ID is visible in lspci output at line: Capabilities: [40] Subsystem Link: https://lore.kernel.org/r/20220711225915.13896-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-09-14PCI: apple: Do not leak reset GPIO on unbind/unload/errorDmitry Torokhov1-2/+2
The driver allocates reset GPIO in apple_pcie_setup_port() but neither releases the resource, nor uses devm API to have it released automatically. Let's fix this by switching to devm API. While at it let's use generic devm_fwnode_gpiod_get() instead of OF-specific gpiod_get_from_of_node() - this will allow us top stop exporting the latter down the road. Link: https://lore.kernel.org/r/YxatO5OaI2RpxQ2M@google.com Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Hector Martin <marcan@marcan.st> Acked-by: Marc Zyngier <maz@kernel.org>
2022-09-12PCI/PM: Simplify pci_pm_suspend_noirq()Rajvi Jingar1-12/+7
We always want to save the device state unless the driver has already done it. Rearrange the checking in pci_pm_suspend_noirq() to make this more clear. No functional change intended. [bhelgaas: commit log, rewrap comment] Link: https://lore.kernel.org/r/20220830104913.1620539-1-rajvi.jingar@linux.intel.com Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-12PCI/PM: Always disable PTM for all devices during suspendBjorn Helgaas2-26/+13
We want to disable PTM on Root Ports because that allows some chips, e.g., Intel mobile chips since Coffee Lake, to enter a lower-power PM state. That means we also have to disable PTM on downstream devices. PCIe r6.0, sec 2.2.8, recommends that functions support generation of messages in non-D0 states, so we have to assume Switch Upstream Ports or Endpoints may send PTM Requests while in D1, D2, and D3hot. A PTM message received by a Downstream Port (including a Root Port) with PTM disabled must be treated as an Unsupported Request (sec 6.21.3). PTM was previously disabled only for Root Ports, and it was disabled in pci_prepare_to_sleep(), which is not called at all if a driver supports legacy PM or does its own state saving. Instead, disable PTM early in pci_pm_suspend() and pci_pm_runtime_suspend() so we do it in all cases. Previously PTM was disabled *after* saving device state, so the state restore on resume automatically re-enabled it. Since we now disable PTM *before* saving state, we must explicitly re-enable it in pci_pm_resume() and pci_pm_runtime_resume(). Here's a sample of errors that occur when PTM is disabled only on the Root Port. With this topology: 0000:00:1d.0 Root Port to [bus 08-71] 0000:08:00.0 Switch Upstream Port to [bus 09-71] Kai-Heng reported errors like this: pcieport 0000:00:1d.0: [20] UnsupReq (First) pcieport 0000:00:1d.0: AER: TLP Header: 34000000 08000052 00000000 00000000 Decoding TLP header 0x34...... (0011 0100b) and 0x08000052: Fmt 001b 4 DW header, no data Type 1 0100b Msg (Local - Terminate at Receiver) Requester ID 0x0800 Bus 08 Devfn 00.0 Message Code 0x52 0101 0010b PTM Request The 00:1d.0 Root Port logged an Unsupported Request error when it received a PTM Request with Requester ID 08:00.0. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215453 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216210 Fixes: a697f072f5da ("PCI: Disable PTM during suspend to save power") Link: https://lore.kernel.org/r/20220909202505.314195-10-helgaas@kernel.org Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Consolidate PTM interface declarationsBjorn Helgaas1-6/+2
Consolidate all the PTM-related declarations in drivers/pci/pci.h. No functional change intended. Link: https://lore.kernel.org/r/20220909202505.314195-9-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Reorder functions in logical orderBjorn Helgaas1-62/+62
pci_enable_ptm() and pci_disable_ptm() were separated. pci_save_ptm_state() and pci_restore_ptm_state() dangled at the top. Move them to logical places. No functional change intended. Link: https://lore.kernel.org/r/20220909202505.314195-8-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Preserve RsvdP bits in PTM Control registerBjorn Helgaas1-11/+14
Even though only the low 16 bits of PTM Control are currently defined, the register is 32 bits wide and the unused bits are RsvdP ("Reserved and Preserved"), so software must preserve the values of those bits when writing the register. Update PTM Control reads and writes to use 32-bit accesses and preserve the reserved bits on writes. Link: https://lore.kernel.org/r/20220909202505.314195-7-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Move pci_ptm_info() body into its only callerBjorn Helgaas1-21/+17
pci_ptm_info() is simple and is only called by pci_enable_ptm(). Move the entire body there. No functional change intended. Link: https://lore.kernel.org/r/20220909202505.314195-6-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Add pci_suspend_ptm() and pci_resume_ptm()Bjorn Helgaas3-18/+63
We disable PTM during suspend because that allows some Root Ports to enter lower-power PM states, which means we also need to disable PTM for all downstream devices. Add pci_suspend_ptm() and pci_resume_ptm() for this purpose. pci_enable_ptm() and pci_disable_ptm() are for drivers to use to enable or disable PTM. They use dev->ptm_enabled to keep track of whether PTM should be enabled. pci_suspend_ptm() and pci_resume_ptm() are PCI core-internal functions to temporarily disable PTM during suspend and (depending on dev->ptm_enabled) re-enable PTM during resume. Enable/disable/suspend/resume all use internal __pci_enable_ptm() and __pci_disable_ptm() functions that only update the PTM Control register. Outline: pci_enable_ptm(struct pci_dev *dev) { __pci_enable_ptm(dev); dev->ptm_enabled = 1; pci_ptm_info(dev); } pci_disable_ptm(struct pci_dev *dev) { if (dev->ptm_enabled) { __pci_disable_ptm(dev); dev->ptm_enabled = 0; } } pci_suspend_ptm(struct pci_dev *dev) { if (dev->ptm_enabled) __pci_disable_ptm(dev); } pci_resume_ptm(struct pci_dev *dev) { if (dev->ptm_enabled) __pci_enable_ptm(dev); } Nothing currently calls pci_resume_ptm(); the suspend path saves the PTM state before disabling PTM, so the PTM state restore in the resume path implicitly re-enables it. A future change will use pci_resume_ptm() to fix some problems with this approach. Link: https://lore.kernel.org/r/20220909202505.314195-5-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Separate configuration and enableBjorn Helgaas1-55/+49
PTM configuration and enabling were previously mixed together: pci_ptm_init() collected granularity info and enabled PTM for Root Ports and Switch Upstream Ports; pci_enable_ptm() did the same for Endpoints. Move everything related to the PTM Capability register to pci_ptm_init() for all devices, and everything related to the PTM Control register to pci_enable_ptm(). Link: https://lore.kernel.org/r/20220909202505.314195-4-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Add pci_upstream_ptm() helperBjorn Helgaas1-14/+25
PTM requires an unbroken path of PTM-supporting devices between the PTM Root and the ultimate PTM Requester, but if a Switch supports PTM, only the Upstream Port can have a PTM Capability; the Downstream Ports do not. Previously we copied the PTM configuration from the Switch Upstream Port to the Downstream Ports so dev->ptm_enabled for any device implied that all the upstream devices support PTM. Instead of making it look like Downstream Ports have their own PTM config, add pci_upstream_ptm(), which returns the upstream device that has a PTM Capability (either a Root Port or a Switch Upstream Port). Link: https://lore.kernel.org/r/20220909202505.314195-3-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-09-12PCI/PTM: Cache PTM Capability offsetBjorn Helgaas1-24/+17
Cache the PTM Capability offset instead of searching for it every time we enable/disable PTM or save/restore PTM state. No functional change intended. Link: https://lore.kernel.org/r/20220909202505.314195-2-helgaas@kernel.org Tested-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-08-30PCI: qcom-ep: Add MODULE_DEVICE_TABLEDmitry Baryshkov1-0/+1
Add MODULE_DEVICE_TABLE to enable module autoloading for respective device. Link: https://lore.kernel.org/r/20220430084740.3769925-1-dmitry.baryshkov@linaro.org Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-29PCI: dwc: Drop dependency on ZONE_DMA32Will McVicker2-22/+7
Re-work the msi_msg DMA allocation logic to use dmam_alloc_coherent() which uses the coherent DMA mask to try to return an allocation within the DMA mask limits. With that, we now can drop the msi_page parameter in struct dw_pcie_rp. This allows kernel configurations that disable ZONE_DMA32 to continue supporting a 32-bit DMA mask. Without this patch, the PCIe host device will fail to probe when ZONE_DMA32 is disabled. Link: https://lore.kernel.org/r/20220825235404.4132818-2-willmcvicker@google.com Fixes: 35797e672ff0 ("PCI: dwc: Fix MSI msi_msg DMA mapping") Reported-by: Isaac J. Manjarres <isaacmanjarres@google.com> Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2022-08-26PCI/MSI: Correct 'can_mask' test in msi_add_msi_desc()Josef Johansson1-1/+1
71020a3c0dff4 ("PCI/MSI: Use msi_add_msi_desc()") inadvertently reversed the sense of "msi_attrib.can_mask" in one use: - if (entry->pci.msi_attrib.can_mask) { - addr = pci_msix_desc_addr(entry); - entry->pci.msix_ctrl = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL); + if (!desc.pci.msi_attrib.can_mask) { + addr = pci_msix_desc_addr(&desc); + desc.pci.msix_ctrl = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL); Restore the original test. [bhelgaas: commit log] Fixes: 71020a3c0dff4 ("PCI/MSI: Use msi_add_msi_desc()") Link: https://lore.kernel.org/r/d818f9c9-a432-213e-4152-eaff3b7da52e@oderland.se Signed-off-by: Josef Johansson <josef@oderland.se> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
2022-08-25PCI: pci-bridge-emul: Set position of PCI capabilities to real HW valuePali Rohár4-17/+35
mvebu and aardvark HW have PCIe capabilities on different offset in PCI config space. Extend pci-bridge-emul.c code to allow setting custom driver custom value where PCIe capabilities starts. With this change PCIe capabilities of both drivers are reported at the same location as where they are reported by U-Boot - in their real HW offset. Link: https://lore.kernel.org/r/20220824112124.21675-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-23PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3Felix Fietkau1-1/+1
driver_register() will refuse to register another driver with the same name. This change allows pcie-mediatek-gen3 to coexist with pcie-mediatek built into the kernel. Link: https://lore.kernel.org/r/20220505083907.86598-1-nbd@nbd.name Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
2022-08-23PCI: mvebu: Fix endianness when accessing PCI emul bridge membersPali Rohár1-6/+6
PCI emul bridge members iolimitupper, iobaseupper, memlimit and membase are of type __le16, so correctly access these members using le16_to_cpu() macros. Link: https://lore.kernel.org/r/20220812141115.24082-1-pali@kernel.org Fixes: e7a01876729c ("PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-23PCI: qcom: Sort device-id tableJohan Hovold1-7/+7
Sort the device-id table entries alphabetically by compatible string to make it easier to find entries and add new ones. Link: https://lore.kernel.org/r/20220714071348.6792-9-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Clean up IP configurationsJohan Hovold1-60/+29
The various IP versions have different configurations that are encoded in separate sets of operation callbacks. Currently, there is no need for also maintaining corresponding sets of data parameters, but it is conceivable that these may again be found useful (e.g. to implement minor variations of the operation callbacks). Rename the default configuration structures after the IP version they apply to so that they can more easily be reused by different SoCs. Note that SoC specific configurations can be added later if need arises (e.g. cfg_sc8280xp). Link: https://lore.kernel.org/r/20220714071348.6792-8-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Make all optional clocks optionalJohan Hovold1-24/+4
The kernel is not a devicetree validator and does not need to re-encode information which is already available in the devicetree. This is specifically true for the optional PCIe clocks, some of which are really interconnect clocks. Treat also the 2.7.0 optional clocks as truly optional instead of maintaining a list of clocks per compatible (including two compatible strings for the two identical controllers on sm8450) just to validate the devicetree. Link: https://lore.kernel.org/r/20220714071348.6792-7-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Add support for SA8540PJohan Hovold1-0/+6
The SA8540P platform has five PCIe controllers: two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sa8540p" compatible string and reuse the 1.9.0 ops. Note that like for SC8280XP, the SA8540P controllers need two or three interconnect clocks to be enabled. Link: https://lore.kernel.org/r/20220714071348.6792-6-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Add support for SC8280XPJohan Hovold1-2/+20
The SC8280XP platform has seven PCIe controllers: two used with USB4, two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0 ops. Note that the SC8280XP controllers need two or three interconnect clocks to be enabled. Model these as optional clocks to avoid encoding devicetree data in the PCIe driver. Note that the same could be done for the SM8450 interconnect clocks and possibly also for the TBU clocks. Link: https://lore.kernel.org/r/20220714071348.6792-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang1-1/+1
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c) Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset) Link: https://lore.kernel.org/r/20220803175455.47638-7-william.zhang@broadcom.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-08-14Merge tag 'ntb-5.20' of https://github.com/jonmason/ntbLinus Torvalds4-1/+1464
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
2022-08-10Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds4-1/+541
Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.0: - Introduce a 'struct cxl_region' object with support for provisioning and assembling persistent memory regions. - Introduce alloc_free_mem_region() to accompany the existing request_free_mem_region() as a method to allocate physical memory capacity out of an existing resource. - Export insert_resource_expand_to_fit() for the CXL subsystem to late-publish CXL platform windows in iomem_resource. - Add a polled mode PCI DOE (Data Object Exchange) driver service and use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute Table)" * tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits) cxl/hdm: Fix skip allocations vs multiple pmem allocations cxl/region: Disallow region granularity != window granularity cxl/region: Fix x1 interleave to greater than x1 interleave routing cxl/region: Move HPA setup to cxl_region_attach() cxl/region: Fix decoder interleave programming Documentation: cxl: remove dangling kernel-doc reference cxl/region: describe targets and nr_targets members of cxl_region_params cxl/regions: add padding for cxl_rr_ep_add nested lists cxl/region: Fix IS_ERR() vs NULL check cxl/region: Fix region reference target accounting cxl/region: Fix region commit uninitialized variable warning cxl/region: Fix port setup uninitialized variable warnings cxl/region: Stop initializing interleave granularity cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime cxl/acpi: Minimize granularity for x1 interleaves cxl/region: Delete 'region' attribute from root decoders cxl/acpi: Autoload driver for 'cxl_acpi' test devices cxl/region: decrement ->nr_targets on error in cxl_region_attach() cxl/region: prevent underflow in ways_to_cxl() cxl/region: uninitialized variable in alloc_hpa() ...
2022-08-10NTB: EPF: Tidy up some bounds checksDan Carpenter1-2/+9
This sscanf() is reading from the filename which was set by the kernel so it should be trust worthy. Although the data is likely trust worthy there is some bounds checking but unfortunately, it is not complete or consistent. Additionally, the Smatch static checker marks everything that comes from sscanf() as tainted and so Smatch complains that this code can lead to an out of bounds issue. Let's clean things up and make Smatch happy. The first problem is that there is no bounds checking in the _show() functions. The _store() and _show() functions are very similar so make the bounds checking the same in both. The second issue is that if "win_no" is zero it leads to an array underflow so add an if (win_no <= 0) check for that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-10NTB: EPF: Fix error code in epf_ntb_bind()Dan Carpenter1-1/+2
Return an error code if pci_register_driver() fails. Don't return success. Fixes: da51fd247424 ("NTB: EPF: support NTB transfer between PCI RC and EP connection") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-10PCI: endpoint: pci-epf-vntb: reduce several globals to staticsTom Rix1-3/+3
sparse reports drivers/pci/endpoint/functions/pci-epf-vntb.c:975:5: warning: symbol 'pci_read' was not declared. Should it be static? drivers/pci/endpoint/functions/pci-epf-vntb.c:984:5: warning: symbol 'pci_write' was not declared. Should it be static? drivers/pci/endpoint/functions/pci-epf-vntb.c:989:16: warning: symbol 'vpci_ops' was not declared. Should it be static? These functions and variables are only used in pci-epf-vntb.c, so their storage class specifiers should be static. Fixes: ff32fac00d97 ("NTB: EPF: support NTB transfer between PCI RC and EP connection") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-10PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()Yang Yingliang1-5/+15
In error case of epf_ntb_mw_bar_init(), memory window BARs should be cleared, so add 'num_mws' parameter in epf_ntb_mw_bar_clear() and calling it in error path to clear the BARs. Also add missing error code when pci_epc_mem_alloc_addr() fails. Fixes: ff32fac00d97 ("NTB: EPF: support NTB transfer between PCI RC and EP connection") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-10PCI: endpoint: Fix Kconfig dependencyRen Zhijie1-0/+1
If CONFIG_NTB is not set and CONFIG_PCI_EPF_VNTB is y. make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this: drivers/pci/endpoint/functions/pci-epf-vntb.o: In function `epf_ntb_cmd_handler': pci-epf-vntb.c:(.text+0x95e): undefined reference to `ntb_db_event' pci-epf-vntb.c:(.text+0xa1f): undefined reference to `ntb_link_event' pci-epf-vntb.c:(.text+0xa42): undefined reference to `ntb_link_event' drivers/pci/endpoint/functions/pci-epf-vntb.o: In function `pci_vntb_probe': pci-epf-vntb.c:(.text+0x1250): undefined reference to `ntb_register_device' The functions ntb_*() are defined in drivers/ntb/core.c, which need CONFIG_NTB setting y to be build-in. To fix this build error, add depends on NTB. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: ff32fac00d97("NTB: EPF: support NTB transfer between PCI RC and EP connection") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Acked-by: Frank Li <frank.li@nxp.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-10NTB: EPF: set pointer addr to null using NULL rather than 0Colin Ian King1-1/+1
The pointer addr is being set to null using 0. Use NULL instead. Cleans up sparse warning: warning: Using plain integer as NULL pointer Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-10PCI: endpoint: Support NTB transfer between RC and EPFrank Li3-0/+1436
Add NTB function driver and virtual PCI Bus and Virtual NTB driver to implement communication between PCIe Root Port and PCIe EP devices ┌────────────┐ ┌─────────────────────────────────────┐ │ │ │ │ ├────────────┤ │ ┌──────────────┤ │ NTB │ │ │ NTB │ │ NetDev │ │ │ NetDev │ ├────────────┤ │ ├──────────────┤ │ NTB │ │ │ NTB │ │ Transfer │ │ │ Transfer │ ├────────────┤ │ ├──────────────┤ │ │ │ │ │ │ PCI NTB │ │ │ │ │ EPF │ │ │ │ │ Driver │ │ │ PCI Virtual │ │ │ ├───────────────┐ │ NTB Driver │ │ │ │ PCI EP NTB │◄────►│ │ │ │ │ FN Driver │ │ │ ├────────────┤ ├───────────────┤ ├──────────────┤ │ │ │ │ │ │ │ PCI Bus │ ◄─────► │ PCI EP Bus │ │ Virtual PCI │ │ │ PCI │ │ │ Bus │ └────────────┘ └───────────────┴──────┴──────────────┘ PCIe Root Port PCI EP This driver includes 3 parts: 1 PCI EP NTB function driver 2 Virtual PCI bus 3 PCI virtual NTB driver, which is loaded only by above virtual PCI bus Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-10PCI: designware-ep: Allow pci_epc_set_bar() update inbound map addressFrank Li1-1/+9
ntb_mw_set_trans() will set memory map window after endpoint function driver bind. The inbound map address need be updated dynamically when using NTB by PCIe Root Port and PCIe Endpoint connection. Checking if iatu already assigned to the BAR, if yes, using assigned iatu number to update inbound address map and skip set BAR's register. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2022-08-06Merge tag 'dma-mapping-5.20-2022-08-06' of ↵Linus Torvalds2-62/+36
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy, Christoph Hellwig) - restructure the PCIe peer to peer mapping support (Logan Gunthorpe) - allow the IOMMU code to communicate an optional DMA mapping length and use that in scsi and libata (John Garry) - split the global swiotlb lock (Tianyu Lan) - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang, Lukas Bulwahn, Robin Murphy) * tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits) swiotlb: fix passing local variable to debugfs_create_ulong() dma-mapping: reformat comment to suppress htmldoc warning PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg() RDMA/rw: drop pci_p2pdma_[un]map_sg() RDMA/core: introduce ib_dma_pci_p2p_dma_supported() nvme-pci: convert to using dma_map_sgtable() nvme-pci: check DMA ops when indicating support for PCI P2PDMA iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg iommu: Explicitly skip bus address marked segments in __iommu_map_sg() dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support dma-direct: support PCI P2PDMA pages in dma-direct map_sg dma-mapping: allow EREMOTEIO return code for P2PDMA transfers PCI/P2PDMA: Introduce helpers for dma_map_sg implementations PCI/P2PDMA: Attempt to set map_type if it has not been set lib/scatterlist: add flag for indicating P2PDMA segments in an SGL swiotlb: clean up some coding style and minor issues dma-mapping: update comment after dmabounce removal scsi: sd: Add a comment about limiting max_sectors to shost optimal limit ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit ...
2022-08-05Merge tag 'pci-v5.20-changes' of ↵Linus Torvalds57-1735/+2721
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-04Merge branch 'pci/header-cleanup-immutable'Bjorn Helgaas2-1/+5
- Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ() instead (Stafford Horne) - Remove isa_dma_bridge_buggy, except for x86_32, the only place it's used (Stafford Horne) - Define ARCH_GENERIC_PCI_MMAP_RESOURCE for csky (Stafford Horne) - Move common PCI definitions that arches sometimes override to asm-generic/pci.h (Stafford Horne) - Include <linux/isa-dma.h> for 'isa_dma_bridge_buggy' when needed (bisection hole here) (Randy Dunlap) * pci/header-cleanup-immutable: PCI: Stub __pci_ioport_map() for arches that don't support it at all x86/cyrix: include header linux/isa-dma.h asm-generic: Add new pci.h and use it csky: PCI: Define ARCH_GENERIC_PCI_MMAP_RESOURCE PCI: Move isa_dma_bridge_buggy out of asm/dma.h PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
2022-08-04Merge branch 'pci/misc'Bjorn Helgaas5-6/+7
- Drop of_match_ptr() to avoid unused variables when CONFIG_OF is unset (Bjorn Helgaas) - Fix ARM pci_remap_iospace() when CONFIG_MMU unset to avoid build errors (Pali Rohár) * pci/misc: PCI/ACPI: Update link to PCI firmware specification PCI: Drop of_match_ptr() to avoid unused variables
2022-08-04Merge branch 'pci/ctrl/pm-ops'Bjorn Helgaas10-42/+35
- Convert to new *_PM_OPS macros to avoid need for "#ifdef CONFIG_PM_SLEEP" or "__maybe_unused" (Bjorn Helgaas) * pci/ctrl/pm-ops: PCI: Convert to new *_PM_OPS macros
2022-08-04Merge branch 'pci/ctrl/xilinx-cpm'Bjorn Helgaas1-2/+58
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada) * pci/ctrl/xilinx-cpm: MAINTAINERS: Add Xilinx Versal CPM Root Port maintainers PCI: xilinx-cpm: Add support for Versal CPM5 Root Port dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port
2022-08-04Merge branch 'pci/ctrl/vmd'Bjorn Helgaas1-3/+10
- Use devm_kasprintf() instead of simple kasprintf() (Subramanian Mohan) - Add [8086:7D0B] and [8086:AD0B] devices to VMD driver (Francisco Munoz) * pci/ctrl/vmd: PCI: vmd: Add DID 8086:7D0B and 8086:AD0B for Intel MTL SKUs PCI: vmd: Use devm_kasprintf() instead of simple kasprintf()
2022-08-04Merge branch 'pci/ctrl/tegra194'Bjorn Helgaas3-238/+468
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-18 17:54:57 +0300