summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2013-05-09Merge tag 'pci-v3.10-fixes-1' of ↵Linus Torvalds3-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "MSI: PCI: Set ->mask_pos correctly Hotplug: PCI: Delay final fixups until resources are assigned Moorestown: x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0" * tag 'pci-v3.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Delay final fixups until resources are assigned x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0 PCI: Set ->mask_pos correctly
2013-05-08PCI: Delay final fixups until resources are assignedYinghai Lu2-1/+1
Commit 4f535093cf "PCI: Put pci_dev in device tree as early as possible" moved final fixups from pci_bus_add_device() to pci_device_add(). But pci_device_add() happens before resource assignment, so BARs may not be valid yet. Typical flow for hot-add: pciehp_configure_device pci_scan_slot pci_scan_single_device pci_device_add pci_fixup_device(pci_fixup_final, dev) # previous location # resource assignment happens here pci_bus_add_devices pci_bus_add_device pci_fixup_device(pci_fixup_final, dev) # new location [bhelgaas: changelog, move fixups to pci_bus_add_device()] Reference: https://lkml.kernel.org/r/20130415182614.GB9224@xanatos Reported-by: David Bulkow <David.Bulkow@stratus.com> Tested-by: David Bulkow <David.Bulkow@stratus.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.9+
2013-05-02Merge branch 'next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc update from Benjamin Herrenschmidt: "The main highlights this time around are: - A pile of addition POWER8 bits and nits, such as updated performance counter support (Michael Ellerman), new branch history buffer support (Anshuman Khandual), base support for the new PCI host bridge when not using the hypervisor (Gavin Shan) and other random related bits and fixes from various contributors. - Some rework of our page table format by Aneesh Kumar which fixes a thing or two and paves the way for THP support. THP itself will not make it this time around however. - More Freescale updates, including Altivec support on the new e6500 cores, new PCI controller support, and a pile of new boards support and updates. - The usual batch of trivial cleanups & fixes" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits) powerpc: Fix build error for book3e powerpc: Context switch the new EBB SPRs powerpc: Turn on the EBB H/FSCR bits powerpc: Replace CPU_FTR_BCTAR with CPU_FTR_ARCH_207S powerpc: Setup BHRB instructions facility in HFSCR for POWER8 powerpc: Fix interrupt range check on debug exception powerpc: Update tlbie/tlbiel as per ISA doc powerpc: Print page size info during boot powerpc: print both base and actual page size on hash failure powerpc: Fix hpte_decode to use the correct decoding for page sizes powerpc: Decode the pte-lp-encoding bits correctly. powerpc: Use encode avpn where we need only avpn values powerpc: Reduce PTE table memory wastage powerpc: Move the pte free routines from common header powerpc: Reduce the PTE_INDEX_SIZE powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format powerpc: New hugepage directory format powerpc: Don't truncate pgd_index wrongly powerpc: Don't hard code the size of pte page powerpc: Save DAR and DSISR in pt_regs on MCE ...
2013-05-02Merge branch 'for-linus' of ↵Linus Torvalds1-23/+11
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-02proc: Supply a function to remove a proc entry by PDEDavid Howells1-9/+3
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-02proc: Supply PDE attribute setting accessor functionsDavid Howells1-1/+1
Supply accessor functions to set attributes in proc_dir_entry structs. The following are supplied: proc_set_size() and proc_set_user(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> cc: linuxppc-dev@lists.ozlabs.org cc: linux-media@vger.kernel.org cc: netdev@vger.kernel.org cc: linux-wireless@vger.kernel.org cc: linux-pci@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+41
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-04-30PCI: Set ->mask_pos correctlyDan Carpenter1-2/+4
The "+" operation has higher precedence than "?:" and ->msi_cap is always non-zero here so the original statement is equivalent to: entry->mask_pos = PCI_MSI_MASK_64; Which wasn't the intent. [bhelgaas: my fault from 78b5a310ce] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-29Merge tag 'pci-v3.10-changes' of ↵Linus Torvalds36-791/+591
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.10 merge window: PCI device hotplug - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe) - Make acpiphp builtin only, not modular (Jiang Liu) - Add acpiphp mutual exclusion (Jiang Liu) Power management - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki) - Fix fallback to PCI_D0 (Rafael Wysocki) Miscellaneous - Factor quirk_io_region (Yinghai Lu) - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas) - Clean up EISA resource initialization and logging (Bjorn Helgaas) - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas) - MIPS: Initialize of_node before scanning bus (Gabor Juhos) - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos) - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang) - Fix aer_inject return values (Prarit Bhargava) - Remove PME/ACPI dependency (Andrew Murray) - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)" * tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability PCI: Remove "extern" from function declarations ...
2013-04-25pci: Add SRIOV helper function to determine if VFs are assigned to guestAlexander Duyck1-0/+41
This function is meant to add a helper function that will determine if a PF has any VFs that are currently assigned to a guest. We currently have been implementing this function per driver, and going forward I would like to avoid that by making this function generic and using this helper. v2: Removed extern from declaration of pci_vfs_assigned in pci.h and return 0 if SR-IOV is disabled with is inline with other PCI SRIOV functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-24Merge branch 'pci/gavin-msi-cleanup' into nextBjorn Helgaas2-120/+80
* pci/gavin-msi-cleanup: vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability
2013-04-23PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASKBjorn Helgaas1-2/+2
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the Table Offset register, not the flags ("Message Control" per spec) register. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Drop msi_mask_reg() and remove drivers/pci/msi.hBjorn Helgaas2-14/+2
msi_mask_reg() doesn't provide any useful abstraction, do drop it. Remove the now-empty drivers/pci/msi.h. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Use msix_table_size() directly, drop multi_msix_capable()Bjorn Helgaas2-5/+5
The users of multi_msix_capable() are really interested in the table size, so just say what we mean. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macrosBjorn Helgaas2-4/+2
msix_table_offset_reg() is used only once and adds a useless indirection, so just use the table offset directly. msix_pba_offset_reg() is unused, so just delete it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Drop is_64bit_address() and is_mask_bit_support() macrosBjorn Helgaas2-4/+2
is_64bit_address() and is_mask_bit_support() don't provide any useful abstraction, so drop them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Drop msi_data_reg() macroBjorn Helgaas2-8/+6
msi_data_reg() doesn't provide any useful abstraction, so drop it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macrosBjorn Helgaas2-10/+8
msi_lower_address_reg() and msi_upper_address_reg() don't provide any useful abstraction, so drop them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directlyBjorn Helgaas2-5/+4
Note the error in pci_msix_table_size() -- we used PCI_MSI_FLAGS to locate the PCI_MSIX_FLAGS word. No actual breakage because PCI_MSI_FLAGS and PCI_MSIX_FLAGS happen to be the same. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Use cached MSI/MSI-X offsets from dev, not from msi_descBjorn Helgaas1-14/+8
We always know the type (MSI vs MSI-X), so we can use the correct cached capability offset rather than relying on the copy in the msi_attrib. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Use cached MSI-X cap while enabling MSI-XGavin Shan1-20/+16
The patch uses the cached MSI-X capability offset in pci_dev instead of reading it from config space when enabling MSI-X interrupts. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Use cached MSI cap while enabling MSI interruptsGavin Shan1-13/+11
The patch uses the cached MSI capability offset in pci_dev instead of reading it from config space when enabling MSI interrupts. [bhelgaas: removed unrelated msi_control_reg() changes] Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()Gavin Shan1-4/+1
The function pci_msi_check_device() is called while enabling MSI or MSI-X interrupts to make sure the PCI device can support MSI or MSI-X capability. This patch removes the check on MSI or MSI-X capability in the function and lets the caller do the check. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-23PCI: Cache MSI/MSI-X capability offsets in struct pci_devGavin Shan1-23/+19
The patch caches the MSI and MSI-X capability offset in PCI device (struct pci_dev) so that we needn't read it from the config space upon enabling or disabling MSI or MSI-X interrupts. [bhelgaas: moved pm_cap size change to separate patch] Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-18pci: Set dev->dev.type in alloc_pci_devBrian King1-1/+1
Set dev->dev.type in alloc_pci_dev so that archs that have their own versions of pci_setup_device get this set properly in order to ensure things like the boot_vga sysfs parameter get created as expected. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-04-17Merge branch 'pci/rafael-pm' into nextBjorn Helgaas1-11/+6
* pci/rafael-pm: PCI/PM: Make pci_pme_active() ignore devices without PME support PCI/PM: Fix fallback to PCI_D0 in pci_platform_power_transition()
2013-04-17Merge branch 'pci/cleanup' into nextBjorn Helgaas23-242/+232
* pci/cleanup: PCI: Remove "extern" from function declarations PCI: Warn about failures instead of "must_check" functions PCI: Remove __must_check from definitions PCI: Remove unused variables PCI: Move cpci_hotplug_init() proto to header file PCI: Make local functions/structs static PCI: Fix missing prototype for pcie_port_acpi_setup() Conflicts: drivers/pci/hotplug/acpiphp.h include/linux/pci.h
2013-04-17PCI: Remove "extern" from function declarationsBjorn Helgaas12-206/+197
We had an inconsistent mix of using and omitting the "extern" keyword on function declarations in header files. This removes them all. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-17PCI: Warn about failures instead of "must_check" functionsBjorn Helgaas3-2/+10
These places capture return values to avoid "must_check" warnings, but we didn't *do* anything with the return values, which causes "set but not used" warnings. We might as well do something instead of just trying to evade the "must_check" warnings. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-17PCI: Remove __must_check from definitionsBjorn Helgaas2-3/+3
The __must_check (gcc "warn_unused_result") attribute only makes sense when compiling the *caller* of the function, so the attribute should appear on the declaration in the header file, not on the definition. The declarations of these functions are already annotated with __must_check. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-17s390/pci: do not modify function handlesSebastian Ott1-5/+4
Don't modify function handles to get a disabled handle - call clp_disable_fh. With this change we also do no longer deconfigure enabled functions. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-17s390/pci: debug device statesSebastian Ott1-0/+3
Use the debugfs to keep track of a pci function's status changes. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-16Merge branch 'pci/jiang-subdrivers' into nextBjorn Helgaas8-322/+203
* pci/jiang-subdrivers: PCI/ACPI: Remove support of ACPI PCI subdrivers PCI: acpiphp: Protect acpiphp data structures from concurrent updates PCI: acpiphp: Use normal list to simplify implementation PCI: acpiphp: Do not use ACPI PCI subdriver mechanism PCI: acpiphp: Convert acpiphp to be builtin only, not modular PCI/ACPI: Handle PCI slot devices when creating/destroying PCI buses x86/PCI: Implement pcibios_{add|remove}_bus() hooks ia64/PCI: Implement pcibios_{add|remove}_bus() hooks PCI/ACPI: Prepare stub functions to handle ACPI PCI (hotplug) slots PCI: Add pcibios hooks for adding and removing PCI buses PCI: acpiphp: Replace local macros with standard ACPI macros PCI: acpiphp: Remove all functions even if function 0 doesn't exist PCI: acpiphp: Use list_for_each_entry_safe() in acpiphp_sanitize_bus() PCI: Clean up usages of pci_bus->is_added PCI: When removing bus, always remove legacy files & unregister
2013-04-16PCI: acpiphp: Protect acpiphp data structures from concurrent updatesJiang Liu2-18/+78
Now acpiphp_enumerate_slots() and acpiphp_remove_slots() may be invoked concurrently by the PCI core, so add a bridge_mutex and reference count mechanism to protect acpiphp bridge/slot/function data structures. To avoid deadlock, handle_hotplug_event_bridge() will requeue the hotplug event onto the kacpi_hotplug_wq by calling alloc_acpi_hp_work(). But the workaround has introduced a minor race window because the 'bridge' passed to _handle_hotplug_event_bridge() may have already been destroyed when _handle_hotplug_event_bridge() is actually executed by the kacpi_hotplug_wq. So hold a reference count on the passed 'bridge'. Fix the same issue for handle_hotplug_event_func() too. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-16PCI: acpiphp: Use normal list to simplify implementationYijing Wang2-15/+12
Use normal list for struct acpiphp_slot to simplify implementation. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-16Merge branch 'pci/misc' into nextBjorn Helgaas6-93/+69
* pci/misc: PCI: Clean up quirk_io_region PCI: Use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFT PCI: Use PCI_EXP_SLTCAP_PSN mask when extracting slot number PCI: Remove unnecessary dependencies between PME and ACPI [SCSI] mvumi: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b [SCSI] mvsas: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b ahci: Use PCI_VENDOR_ID_MARVELL_EXT for 0x1b4b PCI: Define macro for Marvell vendor ID PCI: Add MSI INTX_DISABLE quirks for AR8161/AR8162/AR8171/AR8172/E210X PCI: aer_inject: Fix return values when device not found
2013-04-16PCI: Clean up quirk_io_regionYinghai Lu1-85/+45
Before every call of quirk_io_region(), pci_read_config_word() is called. We can fold that call into quirk_io_region() to make code more readable. [bhelgaas: changelog, fill bus_region directly rather than copying from res] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-16PCI: Use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFTLibin1-1/+1
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as an inline funcion vma_pages() in linux/mm.h, so use it. Signed-off-by: Libin <huawei.libin@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-16PCI: Use PCI_EXP_SLTCAP_PSN mask when extracting slot numberBjorn Helgaas1-1/+1
Use PCI_EXP_SLTCAP_PSN mask to make it easier to find where the Physical Slot Number is used. The Physical Slot Number is bits 31:19 of the Slot Capabilities Register, and slot_cap is a u32, so the mask is technically unnecessary, but it's helpful for human readers. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-16PCI: Remove unnecessary dependencies between PME and ACPIBjorn Helgaas2-3/+1
PCIe PME doesn't depend on ACPI, so remove the #includes and Kconfig dependency. Based-on-patch-by: Andrew Murray <Andrew.Murray@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-16PCI/PM: Make pci_pme_active() ignore devices without PME supportRafael J. Wysocki1-3/+2
Make pci_pme_active() ignore devices without PME support, so that it doesn't print the "PME enabled" or "PME disabled" debug messages for devices that don't support PME. So that pci_pme_active() doesn't have to check pm_cap in addition to pme_support, make pci_pm_init() clear pme_support upfront to make sure that it will be 0 for pm_cap equal to 0. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-16PCI/PM: Fix fallback to PCI_D0 in pci_platform_power_transition()Rafael J. Wysocki1-8/+4
Commit b51306c (PCI: Set device power state to PCI_D0 for device without native PM support) modified pci_platform_power_transition() by adding code causing dev->current_state for devices that don't support native PCI PM but are power-manageable by the platform to be changed to PCI_D0 regardless of the value returned by the preceding platform_pci_set_power_state(). In particular, that also is done if the platform_pci_set_power_state() has been successful, which causes the correct power state of the device set by pci_update_current_state() in that case to be overwritten by PCI_D0. Fix that mistake by making the fallback to PCI_D0 only happen if the platform_pci_set_power_state() has returned an error. [bhelgaas: folded in Yinghai's simplification, added URL & stable info] Reference: http://lkml.kernel.org/r/27806FC4E5928A408B78E88BBC67A2306F466BBA@ORSMSX101.amr.corp.intel.com Reported-by: Chris J. Benenati <chris.j.benenati@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@vger.kernel.org> # v3.2+
2013-04-15PCI: Remove unused variablesBjorn Helgaas3-16/+5
This fixes "set but not used" warnings found via "make W=1". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-15PCI: Move cpci_hotplug_init() proto to header fileBjorn Helgaas2-8/+9
cpci_hotplug_init() and cpci_hotplug_exit() are defined in cpci_hotplug_core.c but had extern declarations in pci_hotplug_core.c. This puts the declarations in a header file included both places so the compiler can help keep everything consistent. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-13PCI: acpiphp: Do not use ACPI PCI subdriver mechanismJiang Liu4-247/+60
Previously the acpiphp driver registered itself as an ACPI PCI subdriver, so its callbacks were invoked when creating/destroying PCI root buses to manage ACPI-based PCI hotplug slots. But it doesn't handle P2P bridge hotplug events, so it will cause strange behaviour if there are hotplug slots associated with a hot-removed P2P bridge. This patch fixes this issue by: 1) Directly hooking into PCI core to update hotplug slot devices when creating/destroying PCI buses through: pci_{add|remove}_bus() -> acpi_pci_{add|remove}_bus() 2) Getting rid of unused ACPI PCI subdriver-related code It also cleans up unused code in the acpiphp driver. [bhelgaas: keep acpi_pci_add_bus() stub for CONFIG_ACPI=n] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-13PCI: acpiphp: Convert acpiphp to be builtin only, not modularJiang Liu3-17/+10
Convert acpiphp to be builtin only, with no module option. Previously, when HOTPLUG_PCI_ACPI=m, users could disable acpiphp by removing the module or preventing it from loading. That can't be done if acpiphp is builtin statically, so this adds an "acpiphp.disable" kernel parameter. If a user needs to use this parameter, it is a bug, and we want to hear about it. [bhelgaas: fold in acpiphp.disable here, remove documentation] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-13PCI/ACPI: Handle PCI slot devices when creating/destroying PCI busesJiang Liu1-2/+5
Currently the pci_slot driver doesn't update PCI slot devices when PCI device hotplug event happens, which may cause memory leak and returning stale information to user. Now the pci_slot driver has been changed as built-in driver, so invoke PCI slot enumeration and destroy routines directly from the PCI core. And remove ACPI PCI sub-driver related code because it isn't needed any more. [bhelgas: removed "extern" from function declarations] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-13PCI/ACPI: Prepare stub functions to handle ACPI PCI (hotplug) slotsJiang Liu1-0/+24
Prepare two stub functions to handle ACPI PCI slots and ACPI PCI hotplug slots, which will be invoked by the PCI core when creating/destroying PCI buses. It will be used to get rid of ACPI PCI subdrivers for pci_slot and acpiphp, and eventually remove the ACPI PCI subdriver mechanism. And it will also be used to handle ACPI PCI (hotplug) slots in a unified way, both at boot time and for PCI hotplug operations. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Myron Stowe <myron.stowe@redhat.com>
2013-04-13PCI: Add pcibios hooks for adding and removing PCI busesJiang Liu2-0/+13
On ACPI-based platforms, the pci_slot driver creates PCI slot devices according to information from ACPI tables by registering an ACPI PCI subdriver. The ACPI PCI subdriver will only be called when creating/ destroying PCI root buses, and it won't be called when hot-plugging P2P bridges. It may cause stale PCI slot devices after hot-removing a P2P bridge if that bridge has associated PCI slots. And the acpiphp driver has the same issue too. This patch introduces two hook points into the PCI core, which will be invoked when creating/destroying PCI buses for PCI host and P2P bridges. They could be used to setup/destroy platform dependent stuff in a unified way, both at boot time and for PCI hotplug operations. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Myron Stowe <myron.stowe@redhat.com>
2013-04-13PCI: acpiphp: Replace local macros with standard ACPI macrosJiang Liu2-6/+2
Replace local defined macros (ACPI_STA_xxx) with standard ACPI macros (ACPI_STA_DEVICE_xxx). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 02:41:07 +0300