summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2024-09-04PCI: brcmstb: Use swinit reset if availableJim Quinlan1-0/+24
The 7712 SoC adds a software init reset device for the PCIe HW. If found in the DT node, use it. Link: https://lore.kernel.org/linux-pci/20240815225731.40276-7-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-04PCI: brcmstb: Use bridge reset if availableJim Quinlan1-1/+17
The 7712 SoC has a bridge reset which can be described in the device tree. Use it if present. Otherwise, continue to use the legacy method to reset the bridge. Link: https://lore.kernel.org/linux-pci/20240815225731.40276-6-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [kwilczynski: commit log, refactored function brcm_pcie_bridge_sw_init_set_generic()] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
2024-09-04PCI: brcmstb: Use common error handling code in brcm_pcie_probe()Jim Quinlan1-13/+12
Refactor the error handling in the bottom half of the probe function for readability. The invocation of clk_prepare_enable() is moved lower in the function and this simplifies a couple of return paths. The dev_err_probe() is also used when it is apt. Link: https://lore.kernel.org/linux-pci/20240815225731.40276-5-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-04PCI: cadence: Drop excess cdns_pcie_rc.dev kerneldoc descriptionBjorn Helgaas1-1/+0
Struct cdns_pcie_rc once had a .dev member, but it was removed by bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library"). Drop the extra kerneldoc for it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-09-03PCI: j721e: Add reset GPIO to struct j721e_pcieThéo Lebrun1-0/+2
Add reset GPIO to struct j721e_pcie, so it can be used at suspend and resume stages. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-4-a2f9156da6c3@bootlin.com Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-03PCI: j721e: Use dev_err_probe() in the probe() functionThomas Richard1-11/+8
Use dev_err_probe() instead of dev_err() in the probe() function to simplify the code and standardize the error output. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-3-a2f9156da6c3@bootlin.com Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-09-03PCI: cadence: Set cdns_pcie_host_init() globalThomas Richard2-3/+8
During the resume sequence of the host, cdns_pcie_host_init() needs to be called, so set it global. The dev function parameter is removed, as it isn't used. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-2-a2f9156da6c3@bootlin.com Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-03PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup()Thomas Richard2-13/+32
The function cdns_pcie_host_setup() mixes probe structure and link setup. The link setup must be done during the resume sequence. So extract it from cdns_pcie_host_setup() and create a dedicated function. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-1-a2f9156da6c3@bootlin.com Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-01PCI/AER: Use PCI_DEVID() macro in aer_inject()Jinjie Ruan1-2/+2
The PCI_DEVID() macro can be used instead of open-coding it. No functional changes intended. Link: https://lore.kernel.org/linux-pci/20240829022435.4145181-1-ruanjinjie@huawei.com Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-08-31PCI: j721e: Enable ACSPCIE Refclk if "ti,syscon-acspcie-proxy-ctrl" existsSiddharth Vadapalli1-1/+38
The ACSPCIE module is capable of driving the reference clock required by the PCIe Endpoint device. It is an alternative to on-board and external reference clock generators. Enabling the output from the ACSPCIE module's PAD IO Buffers requires clearing the "PAD IO disable" bits of the ACSPCIE_PROXY_CTRL register in the CTRL_MMR register space. Add support to enable the ACSPCIE reference clock output using the optional device-tree property "ti,syscon-acspcie-proxy-ctrl". Link: https://lore.kernel.org/linux-pci/20240829105316.1483684-3-s-vadapalli@ti.com Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-08-23PCI: Add function 0 DMA alias quirk for Glenfly Arise chipWangYuli1-0/+4
Add DMA support for audio function of Glenfly Arise chip, which uses Requester ID of function 0. Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com Signed-off-by: SiyuLi <siyuli@glenfly.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> [bhelgaas: lower-case hex to match local code, drop unused Device IDs] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Iwai <tiwai@suse.de>
2024-08-22PCI/pwrctl: Add WCN6855 supportKonrad Dybcio1-0/+5
Add support for ATH11K inside the WCN6855 package to the power sequencing PCI power control driver. Link: https://lore.kernel.org/r/20240813191201.155123-1-brgl@bgdev.pl [Bartosz: split Konrad's bigger patch, write the commit message] Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Konrad Dybcio <konradybcio@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
2024-08-13PCI: keystone: Fix if-statement expression in ks_pcie_quirk()Dan Carpenter1-1/+1
This code accidentally uses && where || was intended. It potentially results in a NULL dereference. Thus, fix the if-statement expression to use the correct condition. Fixes: 86f271f22bbb ("PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)") Link: https://lore.kernel.org/linux-pci/1b762a93-e1b2-4af3-8c04-c8843905c279@stanley.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-08-09PCI: Wait for Link before restoring Downstream BusesIlpo Järvinen1-2/+6
__pci_reset_bus() calls pci_bridge_secondary_bus_reset() to perform the reset and also waits for the Secondary Bus to become again accessible. __pci_reset_bus() then calls pci_bus_restore_locked() that restores the PCI devices connected to the bus, and if necessary, recursively restores also the subordinate buses and their devices. The logic in pci_bus_restore_locked() does not take into account that after restoring a device on one level, there might be another Link Downstream that can only start to come up after restore has been performed for its Downstream Port device. That is, the Link may require additional wait until it becomes accessible. Similarly, pci_slot_restore_locked() lacks wait. Amend pci_bus_restore_locked() and pci_slot_restore_locked() to wait for the Secondary Bus before recursively performing the restore of that bus. Fixes: 090a3c5322e9 ("PCI: Add pci_reset_slot() and pci_reset_bus()") Link: https://lore.kernel.org/r/20240808121708.2523-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-09PCI: Deprecate pcim_iomap_regions() in favor of pcim_iomap_region()Philipp Stanner1-2/+6
pcim_iomap_regions() is a complicated function that uses a bit mask to determine the BARs the user wishes to request and ioremap. Almost all users only ever set a single bit in that mask, making that mechanism questionable. pcim_iomap_region() is now available as a more simple replacement. Make pcim_iomap_region() a public function. Mark pcim_iomap_regions() as deprecated. Link: https://lore.kernel.org/r/20240807083018.8734-2-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-09PCI: Make pcim_request_region() a public functionPhilipp Stanner2-2/+1
pcim_request_region() is the managed counterpart of pci_request_region(). It is currently only used internally for PCI. It can be useful for a number of drivers and exporting it is a step towards deprecating more complicated functions. Make pcim_request_region() a public function. Link: https://lore.kernel.org/r/20240729093625.17561-4-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
2024-08-09s390/pci: Stop usurping pdev->dev.groupsLukas Wunner1-0/+5
Bjorn suggests using pdev->dev.groups for attribute_groups constructed on PCI device enumeration: "Is it feasible to build an attribute group in pci_doe_init() and add it to dev->groups so device_add() will automatically add them?" https://lore.kernel.org/r/20231019165829.GA1381099@bhelgaas Unfortunately on s390, pcibios_device_add() usurps pdev->dev.groups for arch-specific attribute_groups, preventing its use for anything else. Introduce an ARCH_PCI_DEV_GROUPS macro which arches can define in <asm/pci.h>. The macro is visible in drivers/pci/pci-sysfs.c through the inclusion of <linux/pci.h>, which in turn includes <asm/pci.h>. On s390, define the macro to the three attribute_groups previously assigned to pdev->dev.groups. Thereby pdev->dev.groups is made available for use by the PCI core. As a side effect, arch/s390/pci/pci_sysfs.c no longer needs to be compiled into the kernel if CONFIG_SYSFS=n. Link: https://lore.kernel.org/r/7b970f7923e373d1b23784721208f93418720485.1722870934.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
2024-08-06PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config readsweiyufeng1-2/+2
Use PCI_POSSIBLE_ERROR() to check the response we get when we read data from hardware. This unifies PCI error response checking and makes error checks consistent and easier to find. Link: https://lore.kernel.org/r/20240806065050.28725-1-412574090@163.com Signed-off-by: weiyufeng <weiyufeng@kylinos.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-06PCI: xilinx: Silence 'set affinity failed' warningMarek Vasut1-7/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-16-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-08-06PCI: xilinx-xdma: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-15-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-08-06PCI: xilinx-nwl: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-14-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-08-06PCI: vmd: Silence 'set affinity failed' warningMarek Vasut1-12/+1
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-13-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-08-02PCI: shpchp: Remove hpc_opsngn5-118/+82
Remove the hpc_ops struct from shpchp. This struct is unnecessary and no other hotplug controller implements it. A similar thing has already been done in pciehp with 82a9e79ef132 ("PCI: pciehp: remove hpc_ops"). Link: https://lore.kernel.org/r/Zp-XXVW4hlcMASEc@archbtw Signed-off-by: ngn <ngn@ngn.tf> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-29PCI: tegra: Silence 'set affinity failed' warningMarek Vasut1-8/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-12-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: rcar-host: Silence 'set affinity failed' warningMarek Vasut1-8/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-11-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: plda: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-10-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: mobiveil: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-9-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: mediatek: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-8-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jianjun Wang <jianjun.wang@mediatek.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: mediatek-gen3: Silence 'set affinity failed' warningMarek Vasut1-10/+3
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-7-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jianjun Wang <jianjun.wang@mediatek.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: dwc: Silence 'set affinity failed' warningMarek Vasut2-16/+3
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-6-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: brcmstb: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-5-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: altera-msi: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-4-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: aardvark: Silence 'set affinity failed' warningMarek Vasut1-8/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-3-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-25Merge tag 'driver-core-6.11-rc1' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...
2024-07-23Merge tag 'irq-msi-2024-07-22' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI interrupt updates from Thomas Gleixner: "Switch ARM/ARM64 over to the modern per device MSI domains. This simplifies the handling of platform MSI and wire to MSI controllers and removes about 500 lines of legacy code. Aside of that it paves the way for ARM/ARM64 to utilize the dynamic allocation of PCI/MSI interrupts and to support the upcoming non standard IMS (Interrupt Message Store) mechanism on PCIe devices" * tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/gic-v3-its: Correctly fish out the DID for platform MSI irqchip/gic-v3-its: Correctly honor the RID remapping genirq/msi: Move msi_device_data to core genirq/msi: Remove platform MSI leftovers irqchip/irq-mvebu-icu: Remove platform MSI leftovers irqchip/irq-mvebu-sei: Switch to MSI parent irqchip/mvebu-odmi: Switch to parent MSI irqchip/mvebu-gicp: Switch to MSI parent irqchip/irq-mvebu-icu: Prepare for real per device MSI irqchip/imx-mu-msi: Switch to MSI parent irqchip/gic-v2m: Switch to device MSI irqchip/gic_v3_mbi: Switch over to parent domain genirq/msi: Remove platform_msi_create_device_domain() irqchip/mbigen: Remove platform_msi_create_device_domain() fallback irqchip/gic-v3-its: Switch platform MSI to MSI parent irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI irqchip/mbigen: Prepare for real per device MSI irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X] irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX ...
2024-07-20Merge tag 'powerpc-6.11-1' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Remove support for 40x CPUs & platforms - Add support to the 64-bit BPF JIT for cpu v4 instructions - Fix PCI hotplug driver crash on powernv - Fix doorbell emulation for KVM on PAPR guests (nestedv2) - Fix KVM nested guest handling of some less used SPRs - Online NUMA nodes with no CPU/memory if they have a PCI device attached - Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels - Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra, Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler, Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat, Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and Vaibhav Jain. * tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits) Documentation/powerpc: Mention 40x is removed powerpc: Remove 40x leftovers macintosh/therm_windtunnel: fix module unload. powerpc: Check only single values are passed to CPU/MMU feature checks powerpc/xmon: Fix disassembly CPU feature checks powerpc: Drop clang workaround for builtin constant checks powerpc64/bpf: jit support for signed division and modulo powerpc64/bpf: jit support for sign extended mov powerpc64/bpf: jit support for sign extended load powerpc64/bpf: jit support for unconditional byte swap powerpc64/bpf: jit support for 32bit offset jmp instruction powerpc/pci: Hotplug driver bridge support pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC powerpc: add missing MODULE_DESCRIPTION() macros macintosh/mac_hid: add MODULE_DESCRIPTION() KVM: PPC: add missing MODULE_DESCRIPTION() macros powerpc/kexec: Use of_property_read_reg() powerpc/64s/radix/kfence: map __kfence_pool at page granularity powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API ...
2024-07-20Merge tag 'pci-v6.11-changes' of ↵Linus Torvalds75-1654/+4445
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms required after reset before config access (Kevin Xie) - Define PCIE_T_RRS_READY_MS for the generic 100ms required after reset before config access (probably should be unified with PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal) Resource management: - Rename find_resource() to find_resource_space() to be more descriptive (Ilpo Järvinen) - Export find_resource_space() for use by PCI core, which needs to learn whether there is available space for a bridge window (Ilpo Järvinen) - Prevent double counting of resources so window size doesn't grow on each remove/rescan cycle (Ilpo Järvinen) - Relax bridge window sizing algorithm so a device doesn't break simply because it was removed and rescanned (Ilpo Järvinen) - Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in pci_register_host_bridge() (not acpi_pci_root_create()) so we can unify it with similar DT functionality (Vidya Sagar) - Extend use of DT "linux,pci-probe-only" property so it works per-host bridge as well as globally (Vidya Sagar) - Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT "linux,pci-probe-only" property in pci_preserve_config() (Vidya Sagar) Driver binding: - Add devres infrastructure for managed request and map of partial BAR resources (Philipp Stanner) - Deprecate pcim_iomap_table() because uses like "pcim_iomap_table()[0]" have no good way to return errors (Philipp Stanner) - Add an always-managed pcim_request_region() for use instead of pci_request_region() and similar, which are sometimes managed depending on whether pcim_enable_device() has been called previously (Philipp Stanner) - Reimplement pcim_set_mwi() so it doesn't need to keep store MWI state (Philipp Stanner) - Add pcim_intx() for use instead of pci_intx(), which is sometimes managed depending on whether pcim_enable_device() has been called previously (Philipp Stanner) - Add managed pcim_iomap_range() to allow mapping of a partial BAR (Philipp Stanner) - Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner) Error handling: - Add missing bridge locking in device reset path and add a warning for other possible lock issues (Dan Williams) - Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner) Power management: - Disable AER and DPC during suspend to avoid spurious wakeups if they share an interrupt with PME (Kai-Heng Feng) PCIe native device hotplug: - Detect if a device was removed or replaced during system sleep so we don't assume a new device is the one that used to be there (Lukas Wunner) Virtualization: - Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it prevents transactions between functions even though it doesn't advertise ACS, so the functions can be attached individually via VFIO (Ajit Khaparde) Peer-to-peer DMA: - Add a "pci=config_acs=" kernel command-line parameter to relax default ACS settings to enable additional peer-to-peer configurations. Requires expert knowledge of topology and ACS operation (Vidya Sagar) Endpoint framework: - Remove unused struct pci_epf_group.type_group (Christophe JAILLET) - Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup() (Dan Carpenter) - Make struct pci_epc_class constant (Greg Kroah-Hartman) - Remove unused pci_endpoint_test_bar_{readl,writel} functions (Jiapeng Chong) - Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam) - Rename struct pci_epc_event_ops.core_init() callback to epc_init() (Manivannan Sadhasivam) - Move DMA init to MHI .epc_init() callback for uniformity (Manivannan Sadhasivam) - Cancel EPF test delayed work when link goes down (Manivannan Sadhasivam) - Add struct pci_epc_event_ops.epc_deinit() callback for cleanup needed on fundamental reset (Manivannan Sadhasivam) - Add 64KB alignment to endpoint test to support Rockchip rk3588 (Niklas Cassel) - Optimize endpoint test by using memcpy() instead of readl() (Niklas Cassel) Device tree bindings: - Add generic "ats-supported" property to advertise that a PCIe Root Complex supports ATS (Jean-Philippe Brucker) Amazon Annapurna Labs PCIe controller driver: - Validate IORESOURCE_BUS presence to avoid NULL pointer dereference (Aleksandr Mishin) Axis ARTPEC-6 PCIe controller driver: - Rename .cpu_addr_fixup() parameter to reflect that it is a PCI address, not a CPU address (Niklas Cassel) Freescale i.MX6 PCIe controller driver: - Convert to agnostic GPIO API (Andy Shevchenko) Freescale Layerscape PCIe controller driver: - Make struct mobiveil_rp_ops constant (Christophe JAILLET) - Use new generic dw_pcie_ep_linkdown() to handle link-down events (Manivannan Sadhasivam) HiSilicon Kirin PCIe controller driver: - Convert to agnostic GPIO API (Andy Shevchenko) - Use _scoped() iterator for OF children to ensure refcounts are decremented at loop exit (Javier Carrasco) Intel VMD host bridge driver: - Create sysfs "domain" symlink before downstream devices are exposed to userspace by pci_bus_add_devices() (Jiwei Sun) Loongson PCIe controller driver: - Enable MSI when LS7A is used with new CPUs that have integrated PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can use MSI (Huacai Chen) Microchip AXI PolarFlare PCIe controller driver: - Move pcie-microchip-host.c to a new PLDA directory (Minda Chen) - Factor PLDA generic items out to a common plda,xpressrich3-axi-common.yaml binding (Minda Chen) - Factor PLDA generic data structures and code out to shared pcie-plda.h, pcie-plda-host.c (Minda Chen) - Add PLDA generic interrupt handling with a .request_event_irq() callback for vendor-specific events (Minda Chen) - Add PLDA generic host init/deinit and map bus functions for use by vendor-specific drivers (Minda Chen) - Rework to use PLDA core (Minda Chen) Microsoft Hyper-V host bridge driver: - Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu) NVIDIA Tegra194 PCIe controller driver: - Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert) - Set 64KB inbound ATU alignment restriction (Jon Hunter) Qualcomm PCIe controller driver: - Make the MHI reg region mandatory for X1E80100, since all PCIe controllers have it (Abel Vesa) - Prevent use of uninitialized data and possible error pointer dereference (Dan Carpenter) - Return error, not success, if dev_pm_opp_find_freq_floor() fails (Dan Carpenter) - Add Operating Performance Points (OPP) support to scale performance state based on aggregate link bandwidth to improve SoC power efficiency (Krishna chaitanya chundru) - Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active even if other drivers don't vote for it (Krishna chaitanya chundru) - Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid writing out all the clock names (Manivannan Sadhasivam) - Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar) - Add HDMA support for the SA8775P SoC (Mrinmay Sarkar) - Override the SA8775P NO_SNOOP default to avoid possible memory corruption (Mrinmay Sarkar) - Make sure resources are disabled during PERST# assertion, even if the link is already disabled (Manivannan Sadhasivam) - Use new generic dw_pcie_ep_linkdown() to handle link-down events (Manivannan Sadhasivam) - Add DT and endpoint driver support for the SA8775P SoC (Mrinmay Sarkar) - Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in the EPF MHI driver (Mrinmay Sarkar) - Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP attribute on the SA8775P SoC (both Root Complex and Endpoint mode) to avoid possible memory corruption (Mrinmay Sarkar) Renesas R-Car PCIe controller driver: - Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to avoid unnecessary backtrace (Marek Vasut) - Add DT and driver support for R-Car V4H (R8A779G0) host and endpoint. This requires separate proprietary firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Assert PERST# for 100ms after power is stable (Damien Le Moal) - Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting configuration (Damien Le Moal) - Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware crash on Qcom-based modems with Rockpro64 board (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Factor common parts of rockchip-dw-pcie DT binding to be shared by Root Complex and Endpoint mode (Niklas Cassel) - Add missing INTx signals to common DT binding (Niklas Cassel) - Add eDMA items to DT binding for Endpoint controller (Niklas Cassel) - Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary short assert/deassert that causes issues with some WLAN controllers (Niklas Cassel) - Refactor dw-rockchip and add support for Endpoint mode (Niklas Cassel) - Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify() wrapper (Niklas Cassel) - Add error messages in .probe() error paths to improve user experience (Uwe Kleine-König) Samsung Exynos PCIe controller driver: - Use bulk clock APIs to simplify clock setup (Shradha Todi) StarFive PCIe controller driver: - Add DT binding and driver support for the StarFive JH7110 PLDA-based PCIe controller (Minda Chen) Synopsys DesignWare PCIe controller driver: - Add generic support for sending PME_Turn_Off when system suspends (Frank Li) - Fix incorrect interpretation of iATU slot 0 after PERST# assert/deassert (Frank Li) - Use msleep() instead of usleep_range() while waiting for link (Konrad Dybcio) - Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA (HDMA) (Manivannan Sadhasivam) - Enable drivers to supply the eDMA channel count since some can't auto detect this (Manivannan Sadhasivam) - Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify() wrapper (Manivannan Sadhasivam) - Pass the eDMA mapping format directly from drivers instead of maintaining a capability for it (Manivannan Sadhasivam) - Add generic dw_pcie_ep_linkdown() to notify EPF drivers about link-down events and restore non-sticky DWC registers lost on link down (Manivannan Sadhasivam) - Add vendor-specific "apb" reg name, interrupt names, INTx names to generic binding (Niklas Cassel) - Enforce DWC restriction that 64-bit BARs must start with an even-numbered BAR (Niklas Cassel) - Consolidate args of dw_pcie_prog_outbound_atu() into a structure (Yoshihiro Shimoda) - Add support for endpoints to send Message TLPs, e.g., for INTx emulation (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Rename .cpu_addr_fixup() parameter to reflect that it is a PCI address, not a CPU address (Niklas Cassel) TI Keystone PCIe controller driver: - Validate IORESOURCE_BUS presence to avoid NULL pointer dereference (Aleksandr Mishin) - Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and causes processor hangs by limiting Max_Read_Request_Size (MRRS) and Max_Payload_Size (MPS) (Kishon Vijay Abraham I) - Leave BAR 0 disabled for AM654x to fix a regression caused by 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus"), which caused a 45-second boot delay (Siddharth Vadapalli) Xilinx Versal CPM PCIe controller driver: - Fix overlapping bridge registers and 32-bit BAR addresses in DT binding (Thippeswamy Havalige) MicroSemi Switchtec management driver: - Make struct switchtec_class constant (Greg Kroah-Hartman) Miscellaneous: - Remove unused struct acpi_handle_node (Dr. David Alan Gilbert) - Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)" * tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits) PCI: loongson: Enable MSI in LS7A Root Complex PCI: Extend ACS configurability PCI: Add missing bridge lock to pci_bus_lock() drm/vboxvideo: fix mapping leaks PCI: Add managed pcim_iomap_range() PCI: Remove legacy pcim_release() PCI: Add managed pcim_intx() PCI: vmd: Create domain symlink before pci_bus_add_devices() PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq() PCI: qcom: Prevent potential error pointer dereference PCI: qcom: Fix missing error code in qcom_pcie_probe() PCI: Give pcim_set_mwi() its own devres cleanup callback PCI: Move struct pci_devres.pinned bit to struct pci_dev PCI: Remove struct pci_devres.enabled status bit PCI: Document hybrid devres hazards PCI: Add managed pcim_request_region() PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all() PCI: Add managed partial-BAR request and map infrastructure PCI: Add devres helpers for iomap table PCI: Add and use devres helper for bit masks ...
2024-07-20Merge tag 'pwrseq-fixes-for-v6.11-rc1' of ↵Linus Torvalds1-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull power sequencing fixes from Bartosz Golaszewski: "There's one fix for an invalid pointer dereference in error path reported by smatch and two patches that address the noisy config choices you reported earlier this week. Summary: - fix an invalid pointer dereference in error path in pwrseq core - reduce the Kconfig noise from PCI pwrctl choices" * tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: arm64: qcom: don't select HAVE_PWRCTL when PCI=n Kconfig: reduce the amount of power sequencing noise power: sequencing: fix an invalid pointer dereference in error path
2024-07-19Merge branch 'pci/misc'Bjorn Helgaas14-3/+15
- Remove unused struct 'acpi_handle_node' (Dr. David Alan Gilbert) - Use array notation for portdrv .id_table consistently (Masahiro Yamada) - Switch to new Intel CPU model defines (Tony Luck) - Add missing MODULE_DESCRIPTION() macros (Jeff Johnson) * pci/misc: PCI: controller: Add missing MODULE_DESCRIPTION() macros PCI: Add missing MODULE_DESCRIPTION() macros PCI/PM: Switch to new Intel CPU model defines PCI: Use array for .id_table consistently ACPI: PCI: Remove unused struct 'acpi_handle_node'
2024-07-19Merge branch 'pci/switchtec'Bjorn Helgaas1-8/+8
- Make switchtec_class constant (Greg Kroah-Hartman) * pci/switchtec: PCI: switchtec: Make switchtec_class constant
2024-07-19Merge branch 'pci/controller/vmd'Bjorn Helgaas1-4/+4
- Create "domain" symlink for vmd before adding devices below the VMD bridge so it's available when mdadm assembles RAID devices from them (Jiwei Sun) * pci/controller/vmd: PCI: vmd: Create domain symlink before pci_bus_add_devices()
2024-07-19Merge branch 'pci/controller/tegra194'Bjorn Helgaas1-4/+1
- Ensure Tegra194 and Tegra234 inbound ATU entries are 64KB-aligned to match the hardware restriction (Jon Hunter) - Remove unused struct 'tegra_pcie_soc' (Dr. David Alan Gilbert) * pci/controller/tegra194: PCI: tegra: Remove unused struct 'tegra_pcie_soc' PCI: tegra194: Set EP alignment restriction for inbound ATU
2024-07-19Merge branch 'pci/controller/rockchip'Bjorn Helgaas6-44/+322
- Use dev_err_probe() in dw-rockchip probe error path so the failures aren't silent (Uwe Kleine-König) - Sleep PCIE_T_PVPERL_MS (100ms) before deasserting PERST# (Damien Le Moal) - Sleep PCIE_T_RRS_READY_MS (100ms) after conventional reset, before a config access (Damien Le Moal) - Request the PERST# GPIO with GPIOD_OUT_LOW so it matches the POR value, which avoids a spurious PERST# assertion and fixes a Qcom modem firmware crash and issues with WLAN controllers, e.g., RTL8822CE (Manivannan Sadhasivam for rockchip, Niklas Cassel for dw-rockchip) - Refactor dw-rockchip and add support for Endpoint mode for rk3568 and rk3588 (Niklas Cassel) * pci/controller/rockchip: PCI: dw-rockchip: Use pci_epc_init_notify() directly PCI: dw-rockchip: Add endpoint mode support PCI: dw-rockchip: Refactor the driver to prepare for EP mode PCI: dw-rockchip: Add rockchip_pcie_get_ltssm() helper PCI: dw-rockchip: Fix weird indentation PCI: dw-rockchip: Fix initial PERST# GPIO value PCI: dw-rockchip: Add error messages in .probe() error paths PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpio PCI: rockchip-host: Wait 100ms after reset before starting configuration PCI: rockchip-host: Fix rockchip_pcie_host_init_port() PERST# handling
2024-07-19Merge branch 'pci/controller/rcar-gen4'Bjorn Helgaas2-34/+276
- Add Synopsys DWC macros for lane skew configuration (Yoshihiro Shimoda) - Add struct rcar_gen4_pcie_drvdata to provide for future SoCs with different initialization requirements (Yoshihiro Shimoda) - Add .ltssm_control() method for SoC dependencies (Yoshihiro Shimoda) - Add r8a779g0 (R-Car V4H) support (Yoshihiro Shimoda) * pci/controller/rcar-gen4: PCI: rcar-gen4: Add support for R-Car V4H PCI: rcar-gen4: Add .ltssm_control() for other SoC support PCI: rcar-gen4: Add struct rcar_gen4_pcie_drvdata PCI: dwc: Add PCIE_PORT_{FORCE,LANE_SKEW} macros
2024-07-19Merge branch 'pci/controller/rcar'Bjorn Helgaas1-1/+5
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to avoid excessive warnings when the driver is confused about link state when resuming (Marek Vasut) * pci/controller/rcar: PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup()
2024-07-19Merge branch 'pci/controller/qcom'Bjorn Helgaas8-186/+314
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid writing out all the clock names (Manivannan Sadhasivam) - Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar) - Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA (HDMA) (Manivannan Sadhasivam) - Enable drivers to supply the eDMA channel count since some can't auto detect this (Manivannan Sadhasivam) - Add HDMA support for the SA8775P SoC (Mrinmay Sarkar) - Override the SA8775P NO_SNOOP default to avoid possible memory corruption (Mrinmay Sarkar) - Make sure resources are disabled during PERST# assertion, even if the link is already disabled (Manivannan Sadhasivam) - Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active even if other drivers don't vote for it (Krishna chaitanya chundru) - Add Operating Performance Points (OPP) to scale performance state based on aggregate link bandwidth to improve SoC power efficiency (Krishna chaitanya chundru) - Return failure instead of success if dev_pm_opp_find_freq_floor() fails (Dan Carpenter) - Avoid an error pointer dereference if dev_pm_opp_find_freq_exact() fails (Dan Carpenter) - Prevent use of uninitialized data in qcom_pcie_suspend_noirq() (Dan Carpenter) * pci/controller/qcom: PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq() PCI: qcom: Prevent potential error pointer dereference PCI: qcom: Fix missing error code in qcom_pcie_probe() PCI: qcom: Add OPP support to scale performance PCI: Bring the PCIe speed to MBps logic to new pcie_dev_speed_mbps() PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path PCI: qcom-ep: Disable resources unconditionally during PERST# assert PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP PCI: qcom: Override NO_SNOOP attribute for SA8775P RC PCI: epf-mhi: Enable HDMA for SA8775P SoC PCI: qcom-ep: Add HDMA support for SA8775P SoC PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers PCI: dwc: Skip finding eDMA channels count for HDMA platforms PCI: dwc: Refactor dw_pcie_edma_find_chip() API PCI: qcom-ep: Add support for SA8775P SOC dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC PCI: qcom: Use devm_clk_bulk_get_all() API
2024-07-19Merge branch 'pci/controller/microchip'Bjorn Helgaas9-560/+1527
- Move PLDA XpressRICH generic DT binding properties to plda,xpressrich3-axi-common.yaml where they can be shared across PLDA-based drivers (Minda Chen) - Create a drivers/pci/controller/plda/ directory for PLDA-based drivers and move pcie-microchip-host.c there (Minda Chen) - Move PLDA generic macros to pcie-plda.h where they can be shared across drivers (Minda Chen) - Extract PLDA generic structures from pcie-microchip-host.c, rename them to be generic, and move them to pcie-plda-host.c where they can be shared across drivers (Minda Chen) - Add a .request_event_irq() callback for requesting device-specific interrupts in addition to PLDA-generic interrupts (Minda Chen) - Add DT binding and driver for the StarFive JH7110 SoC, based on PLDA IP (Minda Chen) * pci/controller/microchip: PCI: starfive: Add JH7110 PCIe controller dt-bindings: PCI: Add StarFive JH7110 PCIe controller PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems() PCI: plda: Add host init/deinit and map bus functions PCI: plda: Add event bitmap field to struct plda_pcie_rp PCI: microchip: Move IRQ functions to pcie-plda-host.c PCI: microchip: Add event irqchip field to host port and add PLDA irqchip PCI: microchip: Add get_events() callback and PLDA get_event() PCI: microchip: Add INTx and MSI event num to struct plda_event PCI: microchip: Add request_event_irq() callback function PCI: microchip: Add num_events field to struct plda_pcie_rp PCI: microchip: Rename interrupt related functions PCI: microchip: Move PLDA functions to pcie-plda-host.c PCI: microchip: Rename PLDA functions to be generic PCI: microchip: Move PLDA structures to plda-pcie.h PCI: microchip: Rename PLDA structures to be generic PCI: microchip: Add bridge_addr field to struct mc_pcie PCI: microchip: Move PLDA IP register macros to pcie-plda.h PCI: microchip: Move pcie-microchip-host.c to PLDA directory dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties # Conflicts: # drivers/pci/pci.h
2024-07-19Merge branch 'pci/controller/loongson'Bjorn Helgaas1-0/+13
* pci/controller/loongson: PCI: loongson: Enable MSI in LS7A Root Complex
2024-07-19Merge branch 'pci/controller/layerscape'Bjorn Helgaas2-2/+2
- Make the ls-gen4 struct mobiveil_rp_ops constant (Christophe JAILLET) * pci/controller/layerscape: PCI: ls-gen4: Make struct mobiveil_rp_ops constant
2024-07-19Merge branch 'pci/controller/keystone'Bjorn Helgaas1-82/+118
- Enable BAR 0 only for v3.65a to avoid Completion Timeouts that cause a 45 second boot delay on the v4.90a-based AM654x SoC (Siddharth Vadapalli) - Avoid a NULL pointer dereference if DT failed to provide a host bridge memory window (Aleksandr Mishin) * pci/controller/keystone: PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) PCI: keystone: Fix NULL pointer dereference in case of DT error in ks_pcie_setup_rc_app_regs() PCI: keystone: Don't enable BAR 0 for AM654x PCI: keystone: Relocate ks_pcie_set/clear_dbi_mode()
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 02:24:14 +0300