summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2023-09-13driver: pci: Update reset timing as the requirement in PCIe base spec r6.0Kevin.xie1-4/+8
Beside, revert the release operation after link down in probe. This commit can fix the incompatibility problem in VF2 linux6.1 with WD NVMe SSD. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-04-13drivers: pci: Clear compile warnings.Kevin.xie1-2/+1
Removed unused variables in hw_init. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-03-29drivers: pci: Modified reset pin control API to gpiolib consumer API.Kevin.xie1-37/+16
For the consisitancy of host driver code among boards, the difference of reset pin config will be maintained in DTS. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-03-27drivers: pci: Modified power pin control API to gpiolib consumer API.Kevin.xie1-22/+11
For the consisitancy of host driver among devkits(ext_gpio) & vf2/evb, the difference of power pin config will be maintained in DTS. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-02-21drivers: pci: Fix crash in rt-linux because of an uninitialized lock.Kevin.xie1-6/+6
Adjust the order of invocations in probe to avoid from the crash. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2023-02-16drivers: pci: Add PHY settings in pcie host driver.Kevin.xie1-8/+36
The settings are about PHY PLL KVCO fine tuning form CTS testing. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-11-15drivers: pci: Set PCIe PCI standard configuration ID.Kevin.xie1-0/+9
Class - PCI-to-PCI bridge. Revision - 2. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-10-27drivers: pci: Support system pm no irq ops.Kevin.xie1-0/+37
Because of the limitation of hardware design, only enable/disable clk here. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-10-27drivers: pci: Support runtime pm & release when found empty slot in probe.Kevin.xie1-5/+67
Used PLDA link up/down status in probe to indicate the slot situations. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-09-20drivers: pci: Support 64bit prefetchable MMIO range.Kevin.xie1-0/+7
Verification has been completed on NVIDIA GT710 with modetest. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-09-05linux:drivers: revise 'stf' to 'starfive'Ziv.Xu1-0/+1
revise "stf" to "starfive" for PCIE, CPUfreq, CPUidle, PMIC driver. Signed-off-by: Ziv.Xu <Ziv.Xu@starfivetech.com>
2022-07-12driver: pci: Add extended reset time for better compatibilityKevin.xie1-1/+1
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-06-07driver: pci: Fix kernel stuck caused by ASPM LTRKevin.xie1-1/+14
Disable the LTR message forwarding of PCIe Message Reception, which has been enabled & set a illegal destination address by PLDA PCIe IP core as default. Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
2022-05-20PCIe: plda: Add support for evbmason.huo1-13/+122
1.Add pinctrl for power-enable & perst#. 2.Config refclk & clkreq. 3.Add ATR for host bridge config space. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-05-06PCI: plda: Fix kernel compile warningsmason.huo1-18/+0
Remove the unused functions. Adjust the dts configuration. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-04-24PCI: plda: Add syscon register configmason.huo1-29/+91
Add the syscon register config when plda hw initializes. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-04-24PCI: plda: Add pcie clk & rstmason.huo1-1/+49
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2022-04-24PCI: plda: Optimize plda pcie host drivermason.huo1-149/+147
Fix the hardcoded ATR setting. Fix some kernel coding standard issues. Signed-off-by: mason.huo <mason.huo@starfivetech.com>
2021-11-251.Add plda pcie host controller driver.ke.zhu3-0/+740
2.Add PCIe host controller DT bingdings of starfive JH7110.
2021-10-16Merge tag 'pci-v5.15-fixes-2' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so we don't dereference the error code as a pointer (Wang Hai) * tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Handle msi_populate_sysfs() errors correctly
2021-10-13PCI/MSI: Handle msi_populate_sysfs() errors correctlyWang Hai1-6/+12
Previously, when msi_populate_sysfs() failed, we saved the error return value as dev->msi_irq_groups, which leads to a page fault when free_msi_irqs() calls msi_destroy_sysfs(). To prevent this, leave dev->msi_irq_groups alone when msi_populate_sysfs() fails. Found by the Hulk Robot when injecting a memory allocation fault in msi_populate_sysfs(): BUG: unable to handle page fault for address: fffffffffffffff4 ... Call Trace: msi_destroy_sysfs+0x30/0xa0 free_msi_irqs+0x11d/0x1b0 Fixes: 2f170814bdd2 ("genirq/msi: Move MSI sysfs handling from PCI to MSI core") Link: https://lore.kernel.org/r/20211012071556.939137-1-wanghai38@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Barry Song <song.bao.hua@hisilicon.com>
2021-10-09Merge tag 's390-5.15-5' of ↵Linus Torvalds1-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix potential memory leak on a error path in eBPF - Fix handling of zpci device on reserve * tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix zpci_zdev_put() on reserve bpf, s390: Fix potential memory leak about jit_data
2021-10-08Merge tag 'acpi-5.15-rc5' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recent ACPI-related regression in the PCI subsystem that introduced a NULL pointer dereference possible to trigger from user space via sysfs on some systems" * tag 'acpi-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI: ACPI: Check parent pointer in acpi_pci_find_companion()
2021-10-07Merge tag 'hyperv-fixes-signed-20211007' of ↵Linus Torvalds1-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Replace uuid.h with types.h in a header (Andy Shevchenko) - Avoid sleeping in atomic context in PCI driver (Long Li) - Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov) * tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Avoid erroneously sending IPI to 'self' hyper-v: Replace uuid.h with types.h PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
2021-10-07PCI: ACPI: Check parent pointer in acpi_pci_find_companion()Rafael J. Wysocki1-0/+3
If acpi_pci_find_companion() is called for a device whose parent pointer is NULL, it will crash when attempting to get the ACPI companion of the parent due to a NULL pointer dereference in the ACPI_COMPANION() macro. This was not a problem before commit 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") that made pci_setup_device() call pci_set_acpi_fwnode() and so it allowed devices with NULL parent pointers to be passed to acpi_pci_find_companion() which is the case in pci_iov_add_virtfn(), for instance. Fix this issue by making acpi_pci_find_companion() check the device's parent pointer upfront and bail out if it is NULL. While pci_iov_add_virtfn() can be changed to set the device's parent pointer before calling pci_setup_device() for it, checking pointers against NULL before dereferencing them is prudent anyway and looking for ACPI companions of virtual functions isn't really useful. Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") Link: https://lore.kernel.org/linux-acpi/8e4bbd5c59de31db71f718556654c0aa077df03d.camel@linux.ibm.com/ Reported-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-04s390/pci: fix zpci_zdev_put() on reserveNiklas Schnelle1-8/+1
Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") the reference count of a zpci_dev is incremented between pcibios_add_device() and pcibios_release_device() which was supposed to prevent the zpci_dev from being freed while the common PCI code has access to it. It was missed however that the handling of zPCI availability events assumed that once zpci_zdev_put() was called no later availability event would still see the device. With the previously mentioned commit however this assumption no longer holds and we must make sure that we only drop the initial long-lived reference the zPCI subsystem holds exactly once. Do so by introducing a zpci_device_reserved() function that handles when a device is reserved. Here we make sure the zpci_dev will not be considered for further events by removing it from the zpci_list. This also means that the device actually stays in the ZPCI_FN_STATE_RESERVED state between the time we know it has been reserved and the final reference going away. We thus need to consider it a real state instead of just a conceptual state after the removal. The final cleanup of PCI resources, removal from zbus, and destruction of the IOMMU stays in zpci_release_device() to make sure holders of the reference do see valid data until the release. Fixes: 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") Cc: stable@vger.kernel.org Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-26Merge tag 'for-linus-5.15b-rc3-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Some minor cleanups and fixes of some theoretical bugs, as well as a fix of a bug introduced in 5.15-rc1" * tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/x86: fix PV trap handling on secondary processors xen/balloon: fix balloon kthread freezing swiotlb-xen: this is PV-only on x86 xen/pci-swiotlb: reduce visibility of symbols PCI: only build xen-pcifront in PV-enabled environments swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests Xen/gntdev: don't ignore kernel unmapping error xen/x86: drop redundant zeroing from cpu_initialize_context()
2021-09-24PCI: hv: Fix sleep while in non-sleep context when removing child devices ↵Long Li1-3/+10
from the bus In hv_pci_bus_exit, the code is holding a spinlock while calling pci_destroy_slot(), which takes a mutex. This is not safe for spinlock. Fix this by moving the children to be deleted to a list on the stack, and removing them after spinlock is released. Fixes: 94d22763207a ("PCI: hv: Fix a race condition when removing the device") Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: "Krzysztof Wilczyński" <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michael Kelley <mikelley@microsoft.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/linux-hyperv/20210823152130.GA21501@kili/ Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/1630365207-20616-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-09-20PCI: only build xen-pcifront in PV-enabled environmentsJan Beulich1-1/+1
The driver's module init function, pcifront_init(), invokes xen_pv_domain() first thing. That construct produces constant "false" when !CONFIG_XEN_PV. Hence there's no point building the driver in non-PV configurations. Drop the (now implicit and generally wrong) X86 dependency: At present, XEN_PV can only be set when X86 is also enabled. In general an architecture supporting Xen PV (and PCI) would want to have this driver built. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/3a7f6c9b-215d-b593-8056-b5fe605dafd7@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-16PCI: Add AMD GPU multi-function power dependenciesEvan Quan1-2/+7
Some AMD GPUs have built-in USB xHCI and USB Type-C UCSI controllers with power dependencies between the GPU and the other functions as in 6d2e369f0d4c ("PCI: Add NVIDIA GPU multi-function power dependencies"). Add device link support for the AMD integrated USB xHCI and USB Type-C UCSI controllers. Without this, runtime power management, including GPU resume and temp and fan sensors don't work correctly. Reported-at: https://gitlab.freedesktop.org/drm/amd/-/issues/1704 Link: https://lore.kernel.org/r/20210903063311.3606226-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-09-16PCI/ACPI: Don't reset a fwnode set by OFJean-Philippe Brucker1-1/+1
Commit 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") added a call to pci_set_acpi_fwnode() in pci_setup_device(), which unconditionally clears any fwnode previously set by pci_set_of_node(). pci_set_acpi_fwnode() looks for ACPI_COMPANION(), which only returns the existing fwnode if it was set by ACPI_COMPANION_SET(). If it was set by OF instead, ACPI_COMPANION() returns NULL and pci_set_acpi_fwnode() accidentally clears the fwnode. To fix this, look for any fwnode instead of just ACPI companions. Fixes a virtio-iommu boot regression in v5.15-rc1. Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") Link: https://lore.kernel.org/r/20210913172358.1775381-1-jean-philippe@linaro.org Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-09-16PCI/VPD: Defer VPD sizing until first accessBjorn Helgaas1-10/+26
7bac54497c3e ("PCI/VPD: Determine VPD size in pci_vpd_init()") reads VPD at enumeration-time to find the size. But this is quite slow, and we don't need the size until we actually need data from VPD. Dave reported a boot slowdown of more than two minutes [1]. Defer the VPD sizing until a driver or the user (via sysfs) requests information from VPD. If devices are quirked because VPD is known not to work, don't bother even looking for the VPD capability. The VPD will not be accessible at all. [1] https://lore.kernel.org/r/20210913141818.GA27911@codemonkey.org.uk/ Link: https://lore.kernel.org/r/20210914215543.GA1437800@bjorn-Precision-5520 Fixes: 7bac54497c3e ("PCI/VPD: Determine VPD size in pci_vpd_init()") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-09Merge tag 'acpi-5.15-rc1-2' of ↵Linus Torvalds3-0/+130
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These add ACPI support to the PCI VMD driver, improve suspend-to-idle support for AMD platforms and update documentation. Specifics: - Add ACPI support to the PCI VMD driver (Rafael Wysocki) - Rearrange suspend-to-idle support code to reflect the platform firmware expectations on some AMD platforms (Mario Limonciello) - Make SSDT overlays documentation follow the code documented by it more closely (Andy Shevchenko)" * tag 'acpi-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Run both AMD and Microsoft methods if both are supported Documentation: ACPI: Align the SSDT overlays file with the code PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus
2021-09-08Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds67-885/+3210
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-03Merge branch 'stable/for-linus-5.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "A new feature called restricted DMA pools. It allows SWIOTLB to utilize per-device (or per-platform) allocated memory pools instead of using the global one. The first big user of this is ARM Confidential Computing where the memory for DMA operations can be set per platform" * 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits) swiotlb: use depends on for DMA_RESTRICTED_POOL of: restricted dma: Don't fail device probe on rmem init failure of: Move of_dma_set_restricted_buffer() into device.c powerpc/svm: Don't issue ultracalls if !mem_encrypt_active() s390/pv: fix the forcing of the swiotlb swiotlb: Free tbl memory in swiotlb_exit() swiotlb: Emit diagnostic in swiotlb_exit() swiotlb: Convert io_default_tlb_mem to static allocation of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS swiotlb: add overflow checks to swiotlb_bounce swiotlb: fix implicit debugfs declarations of: Add plumbing for restricted DMA pool dt-bindings: of: Add restricted DMA pool swiotlb: Add restricted DMA pool initialization swiotlb: Add restricted DMA alloc/free support swiotlb: Refactor swiotlb_tbl_unmap_single swiotlb: Move alloc_size to swiotlb_find_slots swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing swiotlb: Update is_swiotlb_active to add a struct device argument swiotlb: Update is_swiotlb_buffer to add a struct device argument ...
2021-09-02Merge tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-7/+21
Pull VFIO updates from Alex Williamson: - Fix dma-valid return WAITED implementation (Anthony Yznaga) - SPDX license cleanups (Cai Huoqing) - Split vfio-pci-core from vfio-pci and enhance PCI driver matching to support future vendor provided vfio-pci variants (Yishai Hadas, Max Gurtovoy, Jason Gunthorpe) - Replace duplicated reflck with core support for managing first open, last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai Hadas) - Fix non-modular mdev support and don't nag about request callback support (Christoph Hellwig) - Add semaphore to protect instruction intercept handler and replace open-coded locks in vfio-ap driver (Tony Krowiak) - Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe) * tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits) vfio/pci: Introduce vfio_pci_core.ko vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on' vfio: Use select for eventfd PCI / VFIO: Add 'override_only' support for VFIO PCI sub system PCI: Add 'override_only' field to struct pci_device_id vfio/pci: Move module parameters to vfio_pci.c vfio/pci: Move igd initialization to vfio_pci.c vfio/pci: Split the pci_driver code out of vfio_pci_core.c vfio/pci: Include vfio header in vfio_pci_core.h vfio/pci: Rename ops functions to fit core namings vfio/pci: Rename vfio_pci_device to vfio_pci_core_device vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h vfio/pci: Rename vfio_pci.c to vfio_pci_core.c vfio/ap_ops: Convert to use vfio_register_group_dev() s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification s390/vfio-ap: r/w lock for PQAP interception handler function pointer vfio/type1: Fix vfio_find_dma_valid return vfio-pci/zdev: Remove repeated verbose license text vfio: platform: reset: Convert to SPDX identifier vfio: Remove struct vfio_device_ops open/release ...
2021-09-02Merge tag 'for-linus-5.15-rc1-tag' of ↵Linus Torvalds1-11/+19
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - some small cleanups - a fix for a bug when running as Xen PV guest which could result in not all memory being transferred in case of a migration of the guest - a small series for getting rid of code for supporting very old Xen hypervisor versions nobody should be using since many years now - a series for hardening the Xen block frontend driver - a fix for Xen PV boot code issuing warning messages due to a stray preempt_disable() on the non-boot processors * tag 'for-linus-5.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: remove stray preempt_disable() from PV AP startup code xen/pcifront: Removed unnecessary __ref annotation x86: xen: platform-pci-unplug: use pr_err() and pr_warn() instead of raw printk() drivers/xen/xenbus/xenbus_client.c: fix bugon.cocci warnings xen/blkfront: don't trust the backend response data blindly xen/blkfront: don't take local copy of a request from the ring page xen/blkfront: read response from backend only once xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guests xen: assume XENFEAT_mmu_pt_update_preserve_ad being set for pv guests xen: check required Xen features xen: fix setting of max_pfn in shared_info
2021-09-02Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas1-0/+1
- Make ixp4xx driver depend on ARCH_IXP4XX (Geert Uytterhoeven) * remotes/lorenzo/pci/misc: PCI: controller: PCI_IXP4XX should depend on ARCH_IXP4XX
2021-09-02Merge branch 'remotes/lorenzo/pci/endpoint'Bjorn Helgaas10-197/+551
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I) - Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon Vijay Abraham I) - Add pci_epf_vepf_link() to link virtual function to endpoint physical function (Kishon Vijay Abraham I) - Add virtual function number to pci_epc_ops endpoint ops interfaces (Kishon Vijay Abraham I) - Simplify register base address computation for endpoint BAR configuration (Kishon Vijay Abraham I) - Add support to configure virtual functions in cadence endpoint driver (Kishon Vijay Abraham I) - Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I) - Document configfs usage to create virtual functions for endpoints (Kishon Vijay Abraham I) * remotes/lorenzo/pci/endpoint: Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device PCI: cadence: Add support to configure virtual functions PCI: cadence: Simplify code to get register base address for configuring BAR PCI: endpoint: Add virtual function number in pci_epc ops PCI: endpoint: Add support to link a physical function to a virtual function PCI: endpoint: Add support to add virtual function in endpoint core dt-bindings: PCI: pci-ep: Add binding to specify virtual function
2021-09-02Merge branch 'remotes/lorenzo/pci/xilinx-nwl'Bjorn Helgaas1-0/+12
- Document optional clock DT property (Michal Simek) - Enable PCIe ref clock (Hyun Kwon) * remotes/lorenzo/pci/xilinx-nwl: PCI: xilinx-nwl: Enable the clock through CCF dt-bindings: pci: xilinx-nwl: Document optional clock property
2021-09-02Merge branch 'remotes/lorenzo/pci/xgene'Bjorn Helgaas1-1/+0
- Remove redundant dev_err() after devm_ioremap_resource() (ErKun Yang) * remotes/lorenzo/pci/xgene: PCI: xgene-msi: Remove redundant dev_err() call in xgene_msi_probe()
2021-09-02Merge branch 'remotes/lorenzo/pci/tegra194'Bjorn Helgaas1-23/+31
- Fix handling BME_CHGED event (Om Prakash Singh) - Fix MSI-X programming (Om Prakash Singh) - Disable interrupts before entering L2 (Om Prakash Singh) - Don't allow suspend when Tegra PCIe is in EP mode (Om Prakash Singh) * remotes/lorenzo/pci/tegra194: PCI: tegra194: Cleanup unused code PCI: tegra194: Don't allow suspend when Tegra PCIe is in EP mode PCI: tegra194: Disable interrupts before entering L2 PCI: tegra194: Fix MSI-X programming PCI: tegra194: Fix handling BME_CHGED event
2021-09-02Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas1-16/+14
- Remove unused struct tegra_pcie_bus (Krzysztof Wilczyński) * remotes/lorenzo/pci/tegra: PCI: tegra: make const array err_msg static PCI: tegra: Use 'seq_puts' instead of 'seq_printf' PCI: tegra: Fix OF node reference leak PCI: tegra: Remove unused struct tegra_pcie_bus
2021-09-02Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas3-2/+95
- Fix runtime PM imbalance in rcar_pcie_ep_probe() (Dinghao Liu) * remotes/lorenzo/pci/rcar: PCI: rcar: Add L1 link state fix into data abort hook PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe()
2021-09-02Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas1-13/+39
- Split DT bindings for PCIe controllers with independent MSI domains into separate nodes for MT2712/MT7622 (Chuanjia Liu) - Locate shared registers from "mediatek,generic-pciecfg" property (Chuanjia Liu) - Get IRQ from "pcie_irq" if "interrupt-names" property is present to fix an MSI issue (Chuanjia Liu) - Get PCI domain from "linux,pci-domain" property if present (Chuanjia Liu) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number PCI: mediatek: Add new method to get shared pcie-cfg base address dt-bindings: PCI: mediatek: Update the Device tree bindings
2021-09-02Merge branch 'remotes/lorenzo/pci/keembay'Bjorn Helgaas3-0/+489
- Add Intel Keem Bay PCIe controller driver and DT binding (Srikanth Thokala) * remotes/lorenzo/pci/keembay: PCI: keembay: Add support for Intel Keem Bay dt-bindings: PCI: Add Intel Keem Bay PCIe controller
2021-09-02Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas2-11/+7
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) * remotes/lorenzo/pci/iproc: PCI: iproc: Fix BCMA probe resource handling PCI: of: Don't fail devm_pci_alloc_host_bridge() on missing 'ranges'
2021-09-02Merge branch 'remotes/lorenzo/pci/hyper-v'Bjorn Helgaas2-38/+60
- Add domain_nr in struct pci_host_bridge (Boqun Feng) - Use host bridge MSI domain for root buses if present (Boqun Feng) - Allow ARM64 virtual host bridge with no ACPI companion (e.g., Hyper-V) (Boqun Feng) - Make Hyper-V enumeration more generic (Arnd Bergmann) - Set Hyper-V domain_nr at probe-time (Boqun Feng) - Set up Hyper-V MSI domain at bridge probe-time (Boqun Feng) - Enable Hyper-V bridge probing on ARM64 (Boqun Feng) * remotes/lorenzo/pci/hyper-v: PCI: hv: Turn on the host bridge probing on ARM64 PCI: hv: Set up MSI domain at bridge probing time PCI: hv: Set ->domain_nr of pci_host_bridge at probing time PCI: hv: Generify PCI probing arm64: PCI: Support root bridge preparation for Hyper-V arm64: PCI: Restructure pcibios_root_bridge_prepare() PCI: Support populating MSI domains of root buses via bridges PCI: Introduce domain_nr in pci_host_bridge
2021-09-02Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-5/+62
- Support Hyper-V Create Interrupt v3 message (Sunil Muthuswamy) * remotes/lorenzo/pci/hv: PCI: hv: Support for create interrupt v3
2021-09-02Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas5-6/+95
- Convert bool in structs to bitfield (Kishon Vijay Abraham I) - Work around J7200 non-PCIe SERDES lane electrical issue that prevents PCIe link training (Nadeem Athani) - Add J7200 PCIe support to j721e (Kishon Vijay Abraham I) - Add AM64 PCIe support to j721e (Kishon Vijay Abraham I) - Add J7200 and AM64 device IDs to endpoint test (Kishon Vijay Abraham I) * remotes/lorenzo/pci/cadence: misc: pci_endpoint_test: Add deviceID for AM64 and J7200 PCI: j721e: Add PCIe support for AM64 PCI: j721e: Add PCIe support for J7200 PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-31 22:16:08 +0300