summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2022-06-09PCI: Add ACS quirk for Broadcom BCM5750x NICsPavan Chebbi1-0/+3
The Broadcom BCM5750x NICs may be multi-function devices. They do not advertise ACS capability. Peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for these devices so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-06-03Merge tag 'driver-core-5.19-rc1' of ↵Linus Torvalds1-24/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...
2022-06-02Merge tag 'pci-v5.19-fixes-1' of ↵Linus Torvalds2-227/+32
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Revert brcmstb patches that broke booting on Raspberry Pi Compute Module 4 (Bjorn Helgaas) - Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte X299 entry instead of adding a new one (Bjorn Helgaas) - Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo Pieralisi) * tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Lorenzo Pieralisi's email address PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299 Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs" Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators" Revert "PCI: brcmstb: Add control of subdevice voltage regulators" Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"
2022-05-31PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299Bjorn Helgaas1-0/+2
92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted braces around the new Elo i2 entry, so it overwrote the existing Gigabyte X299 entry. Add the appropriate braces. Found by: $ make W=1 drivers/pci/pci.o CC drivers/pci/pci.o drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init] 2974 | .ident = "Elo i2", | ^~~~~~~~ Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas Fixes: 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.15+
2022-05-31Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"Bjorn Helgaas1-39/+26
This reverts commit 830aa6f29f07a4e2f1a947dfa72b3ccddb46dd21. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-5-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"Bjorn Helgaas1-76/+0
This reverts commit 67211aadcb4b968d0fdc57bc27240fa71500c2d4. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-4-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31Revert "PCI: brcmstb: Add control of subdevice voltage regulators"Bjorn Helgaas1-78/+5
This reverts commit 93e41f3fca3d4a0f927b784012338c37f80a8a80. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-3-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"Bjorn Helgaas1-44/+9
This reverts commit 11ed8b8624b8085f706864b4addcd304b1e4fc38. This is part of a revert of the following commits: 11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend") 93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators") 67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators") 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs") Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs"), which appeared in v5.17-rc1, broke booting on the Raspberry Pi Compute Module 4. Apparently 830aa6f29f07 panics with an Asynchronous SError Interrupt, and after further commits here is a black screen on HDMI and no output on the serial console. This does not seem to affect the Raspberry Pi 4 B. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925 Link: https://lore.kernel.org/r/20220511201856.808690-2-helgaas@kernel.org Reported-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-31Merge tag 'iommu-updates-v5.19' of ↵Linus Torvalds4-7/+22
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Intel VT-d driver updates: - Domain force snooping improvement. - Cleanups, no intentional functional changes. - ARM SMMU driver updates: - Add new Qualcomm device-tree compatible strings - Add new Nvidia device-tree compatible string for Tegra234 - Fix UAF in SMMUv3 shared virtual addressing code - Force identity-mapped domains for users of ye olde SMMU legacy binding - Minor cleanups - Fix a BUG_ON in the vfio_iommu_group_notifier: - Groundwork for upcoming iommufd framework - Introduction of DMA ownership so that an entire IOMMU group is either controlled by the kernel or by user-space - MT8195 and MT8186 support in the Mediatek IOMMU driver - Make forcing of cache-coherent DMA more coherent between IOMMU drivers - Fixes for thunderbolt device DMA protection - Various smaller fixes and cleanups * tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits) iommu/amd: Increase timeout waiting for GA log enablement iommu/s390: Tolerate repeat attach_dev calls iommu/vt-d: Remove hard coding PGSNP bit in PASID entries iommu/vt-d: Remove domain_update_iommu_snooping() iommu/vt-d: Check domain force_snooping against attached devices iommu/vt-d: Block force-snoop domain attaching if no SC support iommu/vt-d: Size Page Request Queue to avoid overflow condition iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller iommu/vt-d: Change return type of dmar_insert_one_dev_info() iommu/vt-d: Remove unneeded validity check on dev iommu/dma: Explicitly sort PCI DMA windows iommu/dma: Fix iova map result check bug iommu/mediatek: Fix NULL pointer dereference when printing dev_name iommu: iommu_group_claim_dma_owner() must always assign a domain iommu/arm-smmu: Force identity domains for legacy binding iommu/arm-smmu: Support Tegra234 SMMU dt-bindings: arm-smmu: Add compatible for Tegra234 SOC dt-bindings: arm-smmu: Document nvidia,memory-controller property iommu/arm-smmu-qcom: Add SC8280XP support dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP ...
2022-05-28Merge tag 'hyperv-next-signed-20220528' of ↵Linus Torvalds1-62/+181
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Harden hv_sock driver (Andrea Parri) - Harden Hyper-V PCI driver (Andrea Parri) - Fix multi-MSI for Hyper-V PCI driver (Jeffrey Hugo) - Fix Hyper-V PCI to reduce boot time (Dexuan Cui) - Remove code for long EOL'ed Hyper-V versions (Michael Kelley, Saurabh Sengar) - Fix balloon driver error handling (Shradha Gupta) - Fix a typo in vmbus driver (Julia Lawall) - Ignore vmbus IMC device (Michael Kelley) - Add a new error message to Hyper-V DRM driver (Saurabh Sengar) * tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits) hv_balloon: Fix balloon_probe() and balloon_remove() error handling scsi: storvsc: Removing Pre Win8 related logic Drivers: hv: vmbus: fix typo in comment PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit() PCI: hv: Add validation for untrusted Hyper-V values PCI: hv: Fix interrupt mapping for multi-MSI PCI: hv: Reuse existing IRTE allocation in compose_msi_msg() drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7 video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7 scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7 Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7 x86/hyperv: Disable hardlockup detector by default in Hyper-V guests drm/hyperv: Add error message for fb size greater than allocated PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI Drivers: hv: vmbus: Refactor the ring-buffer iterator functions Drivers: hv: vmbus: Accept hv_sock offers in isolated guests hv_sock: Add validation for untrusted Hyper-V values hv_sock: Copy packets sent by Hyper-V out of the ring buffer hv_sock: Check hv_pkt_iter_first_raw()'s return value ...
2022-05-28Merge tag 'pci-v5.19-changes' of ↵Linus Torvalds30-299/+756
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas) - Log E820 clipping better (Bjorn Helgaas) - Add kernel cmdline options to enable/disable E820 clipping (Hans de Goede) - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no usable address space for touchpads, Thunderbolt devices, etc (Hans de Goede) - Disable E820 clipping by default starting in 2023 (Hans de Goede) PCI device hotplug: - Include files to remove implicit dependencies (Christophe Leroy) - Only put Root Ports in D3 if they can signal and wake from D3 so AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello) Power management: - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since it's unused otherwise (Krzysztof Kozlowski) - Power up devices completely, including anything platform firmware needs to do, during runtime resume (Rafael J. Wysocki) - Move pci_resume_bus() to PM callbacks so we observe the required bridge power-up delays (Rafael J. Wysocki) - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki) - Split pci_raw_set_power_state() between pci_power_up() and a new pci_set_low_power_state() (Rafael J. Wysocki) - Set current_state to D3cold if config read returns ~0, indicating the device is not accessible (Rafael J. Wysocki) - Do not call pci_update_current_state() from pci_power_up() so BARs and ASPM config are restored correctly (Rafael J. Wysocki) - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki) - Split pci_power_up() to pci_set_full_power_state() to avoid some redundant operations (Rafael J. Wysocki) - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki) - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki) - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J. Wysocki) Virtualization: - Acquire device lock before config space access lock to avoid AB/BA deadlock with sriov_numvfs_store() (Yicong Yang) Error handling: - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously leave permanently set (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Whitelist Intel Skylake-E Root Ports regardless of which devfn they are (Shlomo Pongratz) ASPM: - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1 can be enabled (Mika Westerberg) Cadence PCIe controller driver: - Set up device-specific register to allow PTM Responder to be enabled by the normal architected bit (Christian Gmeiner) - Override advertised FLR support since the controller doesn't implement FLR correctly (Parshuram Thombare) Cadence PCIe endpoint driver: - Correct bitmap size for the ob_region_map of outbound window usage (Dan Carpenter) Freescale i.MX6 PCIe controller driver: - Fix PERST# assertion/deassertion so we observe the required delays before accessing device (Francesco Dolcini) Freescale Layerscape PCIe controller driver: - Add "big-endian" DT property (Hou Zhiqiang) - Update SCFG DT property (Hou Zhiqiang) - Add "aer", "pme", "intr" DT properties (Li Yang) - Add DT compatible strings for ls1028a (Xiaowei Bao) Intel VMD host bridge driver: - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt remapping errors when MSI-X remapping is disabled (Nirmal Patel) - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU remapping was enabled (Nirmal Patel) Marvell MVEBU PCIe controller driver: - Add of_pci_get_slot_power_limit() to parse the 'slot-power-limit-milliwatt' DT property (Pali Rohár) - Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár) MediaTek PCIe controller driver: - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin) MediaTek PCIe Gen3 controller driver: - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and mc_handle_intx() to avoid lost interrupts (Conor Dooley) - Fix interrupt handling race (Daire McNamara) NVIDIA Tegra194 PCIe controller driver: - Drop tegra194 MSI register save/restore, which is unnecessary since the DWC core does it (Jisheng Zhang) Qualcomm PCIe controller driver: - Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) Rockchip PCIe controller driver: - Fix bitmap size when searching for free outbound region (Dan Carpenter) Rockchip DesignWare PCIe controller driver: - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because it's not fully compatible with rockchip (Peter Geis) - Reset rockchip-dwc controller at probe (Peter Geis) - Add rockchip-dwc INTx support (Peter Geis) Synopsys DesignWare PCIe controller driver: - Return error instead of success if DMA mapping of MSI area fails (Jiantao Zhang) Miscellaneous: - Change pci_set_dma_mask() documentation references to dma_set_mask() (Alex Williamson)" * tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits) dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC x86/PCI: Disable E820 reserved region clipping starting in 2023 x86/PCI: Disable E820 reserved region clipping via quirks x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions PCI: microchip: Fix potential race in interrupt handling PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits PCI: cadence: Clear FLR in device capabilities register PCI: cadence: Allow PTM Responder to be enabled PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") PCI: vmd: Assign VMD IRQ domain before enumeration PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() PCI: rockchip-dwc: Add legacy interrupt support ...
2022-05-25Merge tag 'acpi-5.19-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA kernel code to upstream revision 20220331, improve handling of PCI devices that are in D3cold during system initialization, add support for a few features, fix bugs and clean up code. Specifics: - Update ACPICA code in the kernel to upstream revision 20220331 including the following changes: - Add support for the Windows 11 _OSI string (Mario Limonciello) - Add the CFMWS subtable to the CEDT table (Lawrence Hileman). - iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz). - iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint Descriptor (Piotr Maziarz). - iASL: NHLT: Rename linux specific strucures to device_info (Piotr Maziarz). - Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore). - Clean up double word in comment (Tom Rix). - Update copyright notices to the year 2022 (Bob Moore). - Remove some tabs and // comments - automated cleanup (Bob Moore). - Replace zero-length array with flexible-array member (Gustavo A. R. Silva). - Interpreter: Add units to time variable names (Paul Menzel). - Add support for ARM Performance Monitoring Unit Table (Besar Wicaksono). - Inform users about ACPI spec violation related to sleep length (Paul Menzel). - iASL/MADT: Add OEM-defined subtable (Bob Moore). - Interpreter: Fix some typo mistakes (Selvarasu Ganesan). - Updates for revision E.d of IORT (Shameer Kolothum). - Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore). - Improve debug messages in the ACPI device PM code (Rafael Wysocki). - Block ASUS B1400CEAE from suspend to idle by default (Mario Limonciello). - Improve handling of PCI devices that are in D3cold during system initialization (Rafael Wysocki). - Fix BERT error region memory mapping (Lorenzo Pieralisi). - Add support for NVIDIA 16550-compatible port subtype to the SPCR parsing code (Jeff Brasen). - Use static for BGRT_SHOW kobj_attribute defines (Tom Rix). - Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen). - Fix missing ERST record ID in the APEI code (Liu Xinpeng). - Make APEI error injection to refuse to inject into the zero page (Tony Luck). - Correct description of INT3407 / INT3532 DPTF attributes in sysfs (Sumeet Pawnikar). - Add support for high frequency impedance notification to the DPTF driver (Sumeet Pawnikar). - Make mp_config_acpi_gsi() a void function (Li kunyu). - Unify Package () representation for properties in the ACPI device properties documentation (Andy Shevchenko). - Include UUID in _DSM evaluation warning (Michael Niewöhner)" * tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits) Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms" ACPI: utils: include UUID in _DSM evaluation warning ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default x86: ACPI: Make mp_config_acpi_gsi() a void function ACPI: DPTF: Add support for high frequency impedance notification ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init() ACPI: bus: Avoid non-ACPI device objects in walks over children ACPI: DPTF: Correct description of INT3407 / INT3532 attributes ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines ACPI, APEI, EINJ: Refuse to inject into the zero page ACPI: PM: Always print final debug message in acpi_device_set_power() ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype ACPI: docs: enumeration: Unify Package () for properties (part 2) ACPI: APEI: Fix missing ERST record id ACPICA: Update version to 20220331 ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output ACPICA: IORT: Updates for revision E.d ACPICA: executer/exsystem: Fix some typo mistakes ACPICA: iASL/MADT: Add OEM-defined subtable ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms ...
2022-05-25Merge branch 'remotes/lorenzo/pci/vmd'Bjorn Helgaas1-3/+4
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt remapping errors when MSI-X remapping is disabled (Nirmal Patel) - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU remapping was enabled (Nirmal Patel) * remotes/lorenzo/pci/vmd: PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") PCI: vmd: Assign VMD IRQ domain before enumeration
2022-05-25Merge branch 'remotes/lorenzo/pci/versatile'Bjorn Helgaas1-2/+1
- Drop unnecessary "retval" variable, since it's never read (Colin Ian King) * remotes/lorenzo/pci/versatile: PCI: versatile: Remove redundant variable retval
2022-05-25Merge branch 'remotes/lorenzo/pci/rockchip'Bjorn Helgaas1-2/+1
- Fix bitmap size when searching for free outbound region (Dan Carpenter) * remotes/lorenzo/pci/rockchip: PCI: rockchip: Fix find_first_zero_bit() limit
2022-05-25Merge branch 'pci/host/qcom'Bjorn Helgaas1-11/+12
- Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) * pci/host/qcom: dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
2022-05-25Merge branch 'remotes/lorenzo/pci/power-slot'Bjorn Helgaas3-5/+177
- Add of_pci_get_slot_power_limit() to parse the 'slot-power-limit-milliwatt' DT property (Pali Rohár) - Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár) * remotes/lorenzo/pci/power-slot: PCI: mvebu: Add support for sending Set_Slot_Power_Limit message PCI: Add function for parsing 'slot-power-limit-milliwatt' DT property PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macro
2022-05-25Merge branch 'remotes/lorenzo/pci/microchip'Bjorn Helgaas1-6/+12
- Add missing semicolon after MODULE_DEVICE_TABLE() (Uwe Kleine-König) - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and mc_handle_intx() to avoid lost interrupts (Conor Dooley) - Fix interrupt handling race (Daire McNamara) * remotes/lorenzo/pci/microchip: PCI: microchip: Fix potential race in interrupt handling PCI: microchip: Add missing chained_irq_enter()/exit() calls PCI: microchip: Add a missing semicolon
2022-05-25Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas2-0/+9
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin) - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno) * remotes/lorenzo/pci/mediatek: PCI: mediatek-gen3: Assert resets to ensure expected init state PCI: mediatek: Fix refcount leak in mtk_pcie_subsys_powerup()
2022-05-25Merge branch 'remotes/lorenzo/pci/imx6'Bjorn Helgaas1-9/+14
- Fix PERST# start-up sequence (Francesco Dolcini) * remotes/lorenzo/pci/imx6: PCI: imx6: Fix PERST# start-up sequence
2022-05-25Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas4-70/+152
- Return error instead of success if DMA mapping of MSI area fails (Jiantao Zhang) - Drop tegra194 MSI register save/restore, which is unnecessary since the DWC core does it (Jisheng Zhang) - Factor out qcom enable/disable resources code (Dmitry Baryshkov) - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because it's not fully compatible with rockchip (Peter Geis) - Reset rockchip-dwc controller at probe (Peter Geis) - Add rockchip-dwc INTx support (Peter Geis) * remotes/lorenzo/pci/dwc: PCI: rockchip-dwc: Add legacy interrupt support PCI: rockchip-dwc: Reset core at driver probe dt-bindings: PCI: Remove fallback from Rockchip DesignWare binding PCI: qcom-ep: Move enable/disable resources code to common functions PCI: tegra194: Remove unnecessary MSI enable reg save and restore PCI: dwc: Fix setting error return on MSI DMA mapping failure
2022-05-25Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas4-3/+38
- Fix bitmap size when searching for free outbound region (Dan Carpenter) - Do device-specific setup to allow PTM Responder to be enabled (Christian Gmeiner) - Don't advertise FLR in Device Capabilities register because the controller incorrectly resets Margining Lane Status and Margining Lane Control on FLR (Parshuram Thombare) * remotes/lorenzo/pci/cadence: PCI: cadence: Clear FLR in device capabilities register PCI: cadence: Allow PTM Responder to be enabled PCI: cadence: Fix find_first_zero_bit() limit
2022-05-25Merge branch 'pci/virtualization'Bjorn Helgaas1-5/+5
- Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() (Yicong Yang, Jay Zhou) * pci/virtualization: PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
2022-05-25Merge branch 'pci/pm'Bjorn Helgaas2-161/+227
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP, since it's not used otherwise (Krzysztof Kozlowski) - Power up all devices during runtime resume (Rafael J. Wysocki) - Resume subordinate bus in bus type callbacks (Rafael J. Wysocki) - Drop pci_dev runtime_d3cold flag since no uses remain (Rafael J. Wysocki) - Move power-up to D0 code to pci_power_up() and rename pci_raw_set_power_state() to pci_set_low_power_state() (Rafael J. Wysocki) - Set current_state to D3cold if the device is not accessible (Rafael J. Wysocki) - Do not call pci_update_current_state() from pci_power_up() (Rafael J. Wysocki) - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki) - Split part of pci_power_up() off to pci_set_full_power_state() (Rafael J. Wysocki) - Do not restore BARs if device is not in D0 (Rafael J. Wysocki) * pci/pm: PCI/PM: Replace pci_set_power_state() in pci_pm_thaw_noirq() PCI/PM: Rearrange pci_set_power_state() PCI/PM: Clean up pci_set_low_power_state() PCI/PM: Do not restore BARs if device is not in D0 PCI/PM: Split pci_power_up() PCI/PM: Write 0 to PMCSR in pci_power_up() in all cases PCI/PM: Do not call pci_update_current_state() from pci_power_up() PCI/PM: Unfold pci_platform_power_transition() in pci_power_up() PCI/PM: Set current_state to D3cold if the device is not accessible PCI/PM: Relocate pci_set_low_power_state() PCI/PM: Split pci_raw_set_power_state() PCI/PM: Rearrange pci_update_current_state() PCI/PM: Drop the runtime_d3cold device flag PCI/PM: Resume subordinate bus in bus type callbacks PCI/PM: Power up all devices during runtime resume PCI/PM: Define pci_restore_standard_config() only for CONFIG_PM_SLEEP
2022-05-25Merge branch 'pci/p2pdma'Bjorn Helgaas1-10/+15
- Update pci_p2pdma_whitelist[] checking so we accept Skylake-E Root Ports even if they're not at devfn 00.0 (Shlomo Pongratz) * pci/p2pdma: PCI/P2PDMA: Whitelist Intel Skylake-E Root Ports at any devfn
2022-05-25Merge branch 'pci/hotplug'Bjorn Helgaas6-11/+36
- Allow D3 only if Root Port can signal and wake from D3 so we don't miss hotplug events on AMD Yellow Carp (Mario Limonciello) - Clean up hotplug include files to enable future powerpc cleanup (Christophe Leroy) * pci/hotplug: PCI: hotplug: Clean up include files PCI/ACPI: Allow D3 only if Root Port can signal and wake from D3
2022-05-25Merge branch 'pci/error'Bjorn Helgaas1-1/+6
- Clear AER "multiple errors" bits to avoid race that left them set forever (Kuppuswamy Sathyanarayanan) * pci/error: PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
2022-05-25PCI: qcom: Fix unbalanced PHY init on probe errorsJohan Hovold1-1/+3
Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5
2022-05-25PCI: qcom: Fix runtime PM imbalance on probe errorsJohan Hovold1-4/+1
Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral. Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.20 Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
2022-05-25PCI: qcom: Fix pipe clock imbalanceJohan Hovold1-6/+0
Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller"), which enables the pipe clock both in init() and in post_init() but only disables in post_deinit(). Note that the pipe clock was also never disabled in the init() error paths and that enabling the clock before powering up the PHY looks questionable. Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # 5.6
2022-05-25PCI: qcom: Add SM8150 SoC supportBhupesh Sharma1-0/+8
The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on SM8250. Add SM8150 support, reusing the members of ops_1_9_0. Link: https://lore.kernel.org/r/20220326060810.1797516-3-bhupesh.sharma@linaro.org Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Vinod Koul <vkoul@kernel.org>
2022-05-24Merge tag 'for-linus-5.19-rc1-tag' of ↵Linus Torvalds1-16/+3
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - decouple the PV interface from kernel internals in the Xen scsifront/scsiback pv drivers - harden the Xen scsifront PV driver against a malicious backend driver - simplify Xen PV frontend driver ring page setup - support Xen setups with multiple domains created at boot time to tolerate Xenstore coming up late - two small cleanup patches * tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits) xen: add support for initializing xenstore later as HVM domain xen: sync xs_wire.h header with upstream xen x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent xen/xenbus: eliminate xenbus_grant_ring() xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring() xen/xenbus: add xenbus_setup_ring() service function xen: update ring.h xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF xen/sound: switch xen_snd_front to use INVALID_GRANT_REF xen/drm: switch xen_drm_front to use INVALID_GRANT_REF xen/usb: switch xen-hcd to use INVALID_GRANT_REF ...
2022-05-20Merge branches 'apple/dart', 'arm/mediatek', 'arm/msm', 'arm/smmu', ↵Joerg Roedel4-7/+22
'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'vfio-notifier-fix' into next
2022-05-19xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()Juergen Gross1-16/+3
Simplify pcifront's shared page creation and removal via xenbus_setup_ring() and xenbus_teardown_ring(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2022-05-18PCI: microchip: Fix potential race in interrupt handlingDaire McNamara1-5/+1
Clear the MSI bit in ISTATUS_LOCAL register after reading it, but before reading and handling individual MSI bits from the ISTATUS_MSI register. This avoids a potential race where new MSI bits may be set on the ISTATUS_MSI register after it was read and be missed when the MSI bit in the ISTATUS_LOCAL register is cleared. ISTATUS_LOCAL is a read/write/clear register; the register's bits are set when the corresponding interrupt source is activated. Each source is independent and thus multiple sources may be active simultaneously. The processor can monitor and clear status bits. If one or more ISTATUS_LOCAL interrupt sources are active, the RootPort issues an interrupt towards the processor (on the AXI domain). Bit 28 of this register reports an MSI has been received by the RootPort. ISTATUS_MSI is a read/write/clear register. Bits 31-0 are asserted when an MSI with message number 31-0 is received by the RootPort. The processor must monitor and clear these bits. Effectively, Bit 28 of ISTATUS_LOCAL informs the processor that an MSI has arrived at the RootPort and ISTATUS_MSI informs the processor which MSI (in the range 0 - 31) needs handling. Reported by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/linux-pci/20220127202000.GA126335@bhelgaas/ Link: https://lore.kernel.org/r/20220517141622.145581-1-daire.mcnamara@microchip.com Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver") Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-05-18Merge tag 'pci-v5.18-fixes-1' of ↵Linus Torvalds3-27/+38
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Avoid putting Elo i2 PCIe Ports in D3cold because downstream devices are inaccessible after going back to D0 (Rafael J. Wysocki) - Qualcomm SM8250 has a ddrss_sf_tbu clock but SC8180X does not; make a SC8180X-specific config without the clock so it probes correctly (Bjorn Andersson) - Revert aardvark chained IRQ handler rewrite because it broke interrupt affinity (Pali Rohár) * tag 'pci-v5.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler" PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
2022-05-18PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bitsKuppuswamy Sathyanarayanan1-1/+6
When a Root Port or Root Complex Event Collector receives an error Message e.g., ERR_COR, it sets PCI_ERR_ROOT_COR_RCV in the Root Error Status register and logs the Requester ID in the Error Source Identification register. If it receives a second ERR_COR Message before software clears PCI_ERR_ROOT_COR_RCV, hardware sets PCI_ERR_ROOT_MULTI_COR_RCV and the Requester ID is lost. In the following scenario, PCI_ERR_ROOT_MULTI_COR_RCV was never cleared: - hardware receives ERR_COR message - hardware sets PCI_ERR_ROOT_COR_RCV - aer_irq() entered - aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS) - aer_irq(): now status == PCI_ERR_ROOT_COR_RCV - hardware receives second ERR_COR message - hardware sets PCI_ERR_ROOT_MULTI_COR_RCV - aer_irq(): pci_write_config_dword(PCI_ERR_ROOT_STATUS, status) - PCI_ERR_ROOT_COR_RCV is cleared; PCI_ERR_ROOT_MULTI_COR_RCV is set - aer_irq() entered again - aer_irq(): status = pci_read_config_dword(PCI_ERR_ROOT_STATUS) - aer_irq(): now status == PCI_ERR_ROOT_MULTI_COR_RCV - aer_irq() exits because PCI_ERR_ROOT_COR_RCV not set - PCI_ERR_ROOT_MULTI_COR_RCV is still set The same problem occurred with ERR_NONFATAL/ERR_FATAL Messages and PCI_ERR_ROOT_UNCOR_RCV and PCI_ERR_ROOT_MULTI_UNCOR_RCV. Fix the problem by queueing an AER event and clearing the Root Error Status bits when any of these bits are set: PCI_ERR_ROOT_COR_RCV PCI_ERR_ROOT_UNCOR_RCV PCI_ERR_ROOT_MULTI_COR_RCV PCI_ERR_ROOT_MULTI_UNCOR_RCV See the bugzilla link for details from Eric about how to reproduce this problem. [bhelgaas: commit log, move repro details to bugzilla] Fixes: e167bfcaa4cd ("PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215992 Link: https://lore.kernel.org/r/20220418150237.1021519-1-sathyanarayanan.kuppuswamy@linux.intel.com Reported-by: Eric Badger <ebadger@purestorage.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com>
2022-05-16Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"Pali Rohár1-26/+22
This reverts commit 1571d67dc190e50c6c56e8f88cdc39f7cc53166e. This commit broke support for setting interrupt affinity. It looks like that it is related to the chained IRQ handler. Revert this commit until issue with setting interrupt affinity is fixed. Fixes: 1571d67dc190 ("PCI: aardvark: Rewrite IRQ code to chained IRQ handler") Link: https://lore.kernel.org/r/20220515125815.30157-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-13PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()Andrea Parri (Microsoft)1-7/+19
[ Similarly to commit a765ed47e4516 ("PCI: hv: Fix synchronization between channel callback and hv_compose_msi_msg()"): ] The (on-stack) teardown packet becomes invalid once the completion timeout in hv_pci_bus_exit() has expired and hv_pci_bus_exit() has returned. Prevent the channel callback from accessing the invalid packet by removing the ID associated to such packet from the VMbus requestor in hv_pci_bus_exit(). Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20220511223207.3386-3-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-05-13PCI: hv: Add validation for untrusted Hyper-V valuesAndrea Parri (Microsoft)1-9/+24
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause data being copied out of the bounds of the source buffer in hv_pci_onchannelcallback(). While at it, remove a redundant validation in hv_pci_generic_compl(): hv_pci_onchannelcallback() already ensures that all processed incoming packets are "at least as large as [in fact larger than] a response". Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20220511223207.3386-2-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-05-13iommu/dma: Explicitly sort PCI DMA windowsRobin Murphy1-7/+1
Originally, creating the dma_ranges resource list in pre-sorted fashion was the simplest and most efficient way to enforce the order required by iova_reserve_pci_windows(). However since then at least one PCI host driver is now re-sorting the list for its own probe-time processing, which doesn't seem entirely unreasonable, so that basic assumption no longer holds. Make iommu-dma robust and get the sort order it needs by explicitly sorting, which means we can also save the effort at creation time and just build the list in whatever natural order the DT had. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/35661036a7e4160850895f9b37f35408b6a29f2f.1652091160.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-13PCI: cadence: Clear FLR in device capabilities registerParshuram Thombare3-1/+23
Clear FLR (Function Level Reset) from device capabilities registers for all physical functions. During FLR, the Margining Lane Status and Margining Lane Control registers should not be reset, as per PCIe specification. However, the controller incorrectly resets these registers upon FLR. This causes PCISIG compliance FLR test to fail. Hence preventing all functions from advertising FLR support if flag quirk_disable_flr is set. Link: https://lore.kernel.org/r/1635165075-89864-1-git-send-email-pthombar@cadence.com Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-05-13PCI: cadence: Allow PTM Responder to be enabledChristian Gmeiner2-0/+14
This enables the Controller [RP] to automatically respond with Response/ResponseD messages if CDNS_PCIE_LM_TPM_CTRL_PTMRSEN and PCI_PTM_CTRL_ENABLE bits are both set. Link: https://lore.kernel.org/r/20220512055539.1782437-1-christian.gmeiner@gmail.com Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-05-12PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if ↵Nirmal Patel1-3/+1
interrupt remapping is enabled by IOMMU.") Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") The commit 2565e5b69c44 was added as a workaround to keep MSI-X remapping enabled if IOMMU enables interrupt remapping. VMD would keep running in low performance mode. There is no dependency between MSI-X remapping by VMD and interrupt remapping by IOMMU. Link: https://lore.kernel.org/r/20220511095707.25403-3-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-05-12PCI: vmd: Assign VMD IRQ domain before enumerationNirmal Patel1-0/+3
During the boot process all the PCI devices are assigned default PCI-MSI IRQ domain including VMD endpoint devices. If interrupt-remapping is enabled by IOMMU, the PCI devices except VMD get new INTEL-IR-MSI IRQ domain. And VMD is supposed to create and assign a separate VMD-MSI IRQ domain for its child devices in order to support MSI-X remapping capabilities. Now when MSI-X remapping in VMD is disabled in order to improve performance, VMD skips VMD-MSI IRQ domain assignment process to its child devices. Thus the devices behind VMD get default PCI-MSI IRQ domain instead of INTEL-IR-MSI IRQ domain when VMD creates root bus and configures child devices. As a result host OS fails to boot and DMAR errors were observed when interrupt remapping was enabled on Intel Icelake CPUs. For instance: DMAR: DRHD: handling fault status reg 2 DMAR: [INTR-REMAP] Request device [0xe2:0x00.0] fault index 0xa00 [fault reason 0x25] Blocked a compatibility format interrupt request To fix this issue, dev_msi_info struct in dev struct maintains correct value of IRQ domain. VMD will use this information to assign proper IRQ domain to its child devices when it doesn't create a separate IRQ domain. Link: https://lore.kernel.org/r/20220511095707.25403-2-nirmal.patel@linux.intel.com Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2022-05-12PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()Yicong Yang1-5/+5
The sysfs sriov_numvfs_store() path acquires the device lock before the config space access lock: sriov_numvfs_store device_lock # A (1) acquire device lock sriov_configure vfio_pci_sriov_configure # (for example) vfio_pci_core_sriov_configure pci_disable_sriov sriov_disable pci_cfg_access_lock pci_wait_cfg # B (4) wait for dev->block_cfg_access == 0 Previously, pci_dev_lock() acquired the config space access lock before the device lock: pci_dev_lock pci_cfg_access_lock dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1 device_lock # A (3) wait for device lock Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may deadlock with sriov_numvfs_store() if the operations occur in the sequence (1) (2) (3) (4). Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires the device lock before the config space access lock, the same as the sriov_numvfs_store() path. [bhelgaas: combined and adapted commit log from Jay Zhou's independent subsequent posting: https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com] Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyicong@hisilicon.com/ Also-posted-by: Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-05-11PCI: hv: Fix interrupt mapping for multi-MSIJeffrey Hugo1-10/+50
According to Dexuan, the hypervisor folks beleive that multi-msi allocations are not correct. compose_msi_msg() will allocate multi-msi one by one. However, multi-msi is a block of related MSIs, with alignment requirements. In order for the hypervisor to allocate properly aligned and consecutive entries in the IOMMU Interrupt Remapping Table, there should be a single mapping request that requests all of the multi-msi vectors in one shot. Dexuan suggests detecting the multi-msi case and composing a single request related to the first MSI. Then for the other MSIs in the same block, use the cached information. This appears to be viable, so do it. Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quicinc.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-05-11PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()Jeffrey Hugo1-7/+9
Currently if compose_msi_msg() is called multiple times, it will free any previous IRTE allocation, and generate a new allocation. While nothing prevents this from occurring, it is extraneous when Linux could just reuse the existing allocation and avoid a bunch of overhead. However, when future IRTE allocations operate on blocks of MSIs instead of a single line, freeing the allocation will impact all of the lines. This could cause an issue where an allocation of N MSIs occurs, then some of the lines are retargeted, and finally the allocation is freed/reallocated. The freeing of the allocation removes all of the configuration for the entire block, which requires all the lines to be retargeted, which might not happen since some lines might already be unmasked/active. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1652282582-21595-1-git-send-email-quic_jhugo@quicinc.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-05-11PCI: rockchip-dwc: Add legacy interrupt supportPeter Geis1-2/+94
The legacy interrupts on the rk356x PCIe controller are handled by a single muxed interrupt. Add IRQ domain support to the pcie-dw-rockchip driver to support the virtual domain. Link: https://lore.kernel.org/r/20220429123832.2376381-4-pgwipeout@gmail.com Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org>
2022-05-11PCI: rockchip-dwc: Reset core at driver probePeter Geis1-13/+10
The PCIe controller is in an unknown state at driver probe. This can lead to undesireable effects when the driver attempts to configure the controller. Prevent issues in the future by resetting the core during probe. Link: https://lore.kernel.org/r/20220429123832.2376381-3-pgwipeout@gmail.com Tested-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 19:31:42 +0300