summaryrefslogtreecommitdiff
path: root/drivers/pci/setup-bus.c
AgeCommit message (Collapse)AuthorFilesLines
2018-10-03PCI: Equalize hotplug memory and io for occupied and empty slotsJon Derrick1-13/+15
Currently, a hotplug bridge will be given hpmemsize additional memory and hpiosize additional io if available, in order to satisfy any future hotplug allocation requirements. These calculations don't consider the current memory/io size of the hotplug bridge/slot, so hotplug bridges/slots which have downstream devices will be allocated their current allocation in addition to the hpmemsize value. This makes for possibly undesirable results with a mix of unoccupied and occupied slots (ex, with hpmemsize=2M): 02:03.0 PCI bridge: <-- Occupied Memory behind bridge: d6200000-d64fffff [size=3M] 02:04.0 PCI bridge: <-- Unoccupied Memory behind bridge: d6500000-d66fffff [size=2M] This change considers the current allocation size when using the hpmemsize/hpiosize parameters to make the reservations predictable for the mix of unoccupied and occupied slots: 02:03.0 PCI bridge: <-- Occupied Memory behind bridge: d6200000-d63fffff [size=2M] 02:04.0 PCI bridge: <-- Unoccupied Memory behind bridge: d6400000-d65fffff [size=2M] Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-04PCI: Move resource distribution for single bridge outside loopMika Westerberg1-41/+41
If there is only a single bridge on the bus, we assign all resources to it. Currently this is done as a part of the resource distribution loop but it does not have to be there, and moving it outside actually improves readability because we can then save one indent level in the loop. While there we can add hotplug_bridges == 1 && normal_bridges == 0 to the same block because they are dealt the same way. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-03-19PCI: Tidy commentsBjorn Helgaas1-5/+1
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas1-0/+1
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas1-0/+1
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler1-22/+22
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-17PCI: Remove unnecessary messages for memory allocation failuresMarkus Elfring1-3/+1
Per ebfdc40969f2 ("checkpatch: attempt to find unnecessary 'out of memory' messages"), when a memory allocation fails, the memory subsystem emits generic "out of memory" messages (see slab_out_of_memory() for some of this logging). Therefore, additional error messages in the caller don't add much value. Remove messages that merely report "out of memory". This preserves some messages that report additional information, e.g., allocation failures that mean we drop hotplug events. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [bhelgaas: changelog, squash patches, make similar changes to acpiphp, cpqphp, ibmphp, keep warning when dropping hotplug event] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-14Merge branch 'pci/resource' into nextBjorn Helgaas1-9/+106
* pci/resource: PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f) PCI: Add pci_resize_resource() for resizing BARs PCI: Add resizable BAR infrastructure PCI: Add PCI resource type mask #define
2017-11-07PCI: Distribute available resources to hotplug-capable bridgesMika Westerberg1-0/+177
The same problem that we have with bus space applies to other resources as well. Linux only allocates the minimal amount of resources so that the devices currently present barely fit there. This prevents extending the chain later on because the resource windows allocated for hotplug downstream ports are too small. Follow what we already did for bus number and assign all available extra resources to hotplug-capable bridges. This makes it possible to extend the hierarchy later. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-07PCI: Add for_each_pci_bridge() helperAndy Shevchenko1-4/+3
The following pattern is often used: list_for_each_entry(dev, &bus->devices, bus_list) { if (pci_is_bridge(dev)) { ... } } Add a for_each_pci_bridge() helper to make that code easier to write and read by reducing indentation level. It also saves one or few lines of code in each occurrence. Convert PCI core parts here at the same time. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [bhelgaas: fold in http://lkml.kernel.org/r/20171013165352.25550-1-andriy.shevchenko@linux.intel.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-26PCI: Add pci_resize_resource() for resizing BARsChristian König1-0/+98
Add a pci_resize_resource() interface to allow device drivers to resize BARs of their devices. This is useful for devices with large local storage, e.g., graphics devices. These devices often only expose 256MB BARs initially to be compatible with 32-bit systems. This function only tries to reprogram the windows of the bridge directly above the requesting device and only the BAR of the same type (usually mem, 64bit, prefetchable). This is done to avoid disturbing other drivers by changing the BARs of their devices. Drivers should use the following sequence to resize their BARs: 1. Disable memory decoding of the device using the PCI cfg dword. 2. Use pci_release_resource() to release all BARs which can move during the resize, including the one you want to resize. 3. Call pci_resize_resource() for each BAR you want to resize. 4. Call pci_assign_unassigned_bus_resources() to reassign new locations for all BARs which are not resized, but could move. 5. If everything worked as expected, enable memory decoding in the device again using the PCI cfg dword. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-24PCI: Add PCI resource type mask #defineChristian König1-9/+8
Add a #define for the PCI resource type mask. We use this mask multiple times in the bus setup. Signed-off-by: Christian König <christian.koenig@amd.com> [bhelgaas: move to setup-bus.c] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2017-04-18PCI: Fix calculation of bridge window's size and alignmentYongji Xie1-2/+2
In case that one device's alignment is greater than its size, we may get an incorrect size and alignment for its bus's memory window in pbus_size_mem(). Fix this case. Signed-off-by: Yongji Xie <elohimes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-29PCI: Remove res_to_dev_res() debug messageBjorn Helgaas1-10/+1
Remove res_to_dev_res() debug message. This is printed from a lookup function. If the message is important, it should be printed from the caller with more context. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2016-09-10x86/ioapic: Ignore root bridges without a companion ACPI deviceRui Wang1-1/+4
Some PCI root bridges don't have a corresponding ACPI device. This can be the case on some old platforms. Don't call acpi_ioapic_add() on these bridges because they can't support ioapic hotplug. Reported-and-tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rui Wang <rui.y.wang@intel.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhelgaas@google.com Cc: helgaas@kernel.org Cc: linux-acpi@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: rjw@rjwysocki.net Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1473522046-31329-1-git-send-email-rui.y.wang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18x86/ioapic: Support hot-removal of IOAPICs present during bootRui Wang1-1/+4
IOAPICs present during system boot aren't added to ioapic_list, thus are unable to be hot-removed. Fix it by calling acpi_ioapic_add() during root bus enumeration. Signed-off-by: Rui Wang <rui.y.wang@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: helgaas@kernel.org Cc: linux-acpi@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: rjw@rjwysocki.net Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1471420837-31003-3-git-send-email-rui.y.wang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-03Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds1-0/+68
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-06-23PCI: Add generic pci_bus_claim_resources()Lorenzo Pieralisi1-0/+68
All PCI resources (bridge windows and BARs) should be inserted in the iomem_resource and ioport_resource trees so we know what space is occupied and what is available for other devices. There's nothing arch-specific about this, but it is currently done by arch-specific code. Add a generic pci_bus_claim_resources() interface so we can migrate away from the arch-specific code. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Yinghai Lu <yinghai@kernel.org>
2016-06-21PCI: Add pcibios_setup_bridge()Gavin Shan1-0/+5
Currently, PowerPC PowerNV platform utilizes ppc_md.pcibios_fixup(), which is called for once after PCI probing and resource assignment are completed, to allocate platform required resources for PCI devices: PE#, IO and MMIO mapping, DMA address translation (TCE) table etc. Obviously, it's not hotplug friendly. This adds weak function pcibios_setup_bridge(), which is called by pci_setup_bridge(). PowerPC PowerNV platform will reuse the function to assign above platform required resources to newly plugged PCI devices during PCI hotplug in subsequent patches. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-06PCI: Remove includes of empty asm-generic/pci-bridge.hBjorn Helgaas1-1/+0
include/asm-generic/pci-bridge.h is now empty, so remove every #include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com> (arm64)
2016-01-08PCI: Fix all whitespace issuesBogicevic Sasa1-1/+1
Fix all whitespace issues (missing or needed whitespace) in all files in drivers/pci. Code is compiled with allyesconfig before and after code changes and objects are recorded and checked with objdiff and they are not changed after this commit. Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-30PCI: Handle IORESOURCE_PCI_FIXED when assigning resourcesDavid Daney1-0/+43
The new Enhanced Allocation (EA) capability support (patches to follow) creates resources with the IORESOURCE_PCI_FIXED set. During resource assignment in pci_bus_assign_resources(), IORESOURCE_PCI_FIXED resources are not given a parent. This, in turn, causes pci_enable_resources() to fail with a "not claimed" error. So, in __pci_bus_assign_resources(), for IORESOURCE_PCI_FIXED resources, try to request the resource from a parent bus. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com>
2015-10-30PCI: Handle IORESOURCE_PCI_FIXED when sizing resourcesDavid Daney1-3/+4
The new Enhanced Allocation (EA) capability support (patches to follow) creates resources with the IORESOURCE_PCI_FIXED set. Since these resources cannot be relocated or resized, their alignment is not really defined, and it is therefore not specified. This causes a problem in pbus_size_mem() where resources with unspecified alignment are disabled. So, in pbus_size_mem() skip IORESOURCE_PCI_FIXED resources, instead of disabling them. [bhelgaas: folded in "flags & IORESOURCE_PCI_FIXED" fix from David] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com>
2015-06-02PCI: Preserve resource size during alignment reorderingYinghai Lu1-2/+3
In d74b9027a4da ("PCI: Consider additional PF's IOV BAR alignment in sizing and assigning"), we store additional alignment in realloc_head and take this into consideration for assignment. In __assign_resources_sorted(), we changed dev_res->res->start, then used resource_start() (which depends on res->start), so the recomputed res->end was completely bogus. Even if we'd had the correct size, the end would have been off by one. Preserve the resource size when we adjust its alignment. [bhelgaas: changelog] Fixes: d74b9027a4da ("PCI: Consider additional PF's IOV BAR alignment in sizing and assigning") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-05-27PCI: Fix IOV resource sorting by alignment requirementWei Yang1-1/+3
In d74b9027a4da ("PCI: Consider additional PF's IOV BAR alignment in sizing and assigning"), it stores additional alignment in realloc_head and takes this into consideration for assignment. After getting the additional alignment, it reorders the head list so resources with bigger alignment are ahead of resources with smaller alignment. It does this by iterating over the head list and inserting ahead of any resource with smaller alignment. This should be done for the first occurrence, but the code currently iterates over the whole list. Fix this by terminating the loop when we find the first smaller resource in the head list. [bhelgaas: changelog] Fixes: d74b9027a4da ("PCI: Consider additional PF's IOV BAR alignment in sizing and assigning") Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-16Merge tag 'powerpc-4.1-1' of ↵Linus Torvalds1-16/+79
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
2015-04-08PCI: Export symbols required for loadable host driver modulesRay Jui1-0/+1
Export the following symbols so they can be referenced by a PCI host bridge driver compiled as a kernel loadable module: pci_common_swizzle pci_create_root_bus pci_stop_root_bus pci_remove_root_bus pci_assign_unassigned_bus_resources pci_fixup_irqs Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-03-31PCI: Consider additional PF's IOV BAR alignment in sizing and assigningWei Yang1-16/+79
When sizing and assigning resources, we divide the resources into two lists: the requested list and the additional list. We don't consider the alignment of additional VF(n) BAR space. This is because the alignment required for the VF(n) BAR space is the size of an individual VF BAR, not the size of the space for *all* VFs. But we want additional alignment to support partitioning on PowerNV. Consider the additional IOV BAR alignment when sizing and assigning resources. When there is not enough system MMIO space to accomodate both the requested list and the additional list, the PF's IOV BAR alignment will not contribute to the bridge. When there is enough system MMIO space for both lists, the additional alignment will contribute to the bridge. The additional alignment is stored in the min_align of pci_dev_resource, which is stored in the additional list by add_to_list() at the end of pbus_size_mem(). The additional alignment is calculated in pci_resource_alignment(). For an IOV BAR, we have arch dependent function to get the alignment for different arch. [bhelgaas: changelog, printk cast] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-01-16PCI: Add pci_claim_bridge_resource() to clip window if necessaryYinghai Lu1-0/+35
Add pci_claim_bridge_resource() to claim a PCI-PCI bridge window. This is like regular pci_claim_resource(), except that if we fail to claim the window, we check to see if we can reduce the size of the window and try again. This is for scenarios like this: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff 64bit pref] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref] The 00:01.0 window is illegal: it starts before the host bridge window, so we have to assume the [0xbdf00000-0xbfffffff] region is inaccessible. We can make it legal by clipping it to [mem 0xc0000000-0xddefffff 64bit pref]. Previously we discarded the 00:01.0 window and tried to reassign that part of the hierarchy from scratch. That is a problem because Linux doesn't always assign things optimally. For example, in this case, BIOS put the 01:00.0 device in a prefetchable window below 4GB, but after 5b28541552ef, Linux puts the prefetchable window above 4GB where the 32-bit 01:00.0 device can't use it. Clipping the 00:01.0 window is less intrusive than completely reassigning things and is sufficient to let us use most of the BIOS configuration. Of course, it's possible that devices below 00:01.0 will no longer fit. If that's the case, we'll have to reassign things. But that's a separate problem. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2015-01-16PCI: Pass bridge device, not bus, when updating bridge windowsYinghai Lu1-12/+9
pci_setup_bridge_io(), pci_setup_bridge_mmio(), and pci_setup_bridge_mmio_pref() program the windows of PCI-PCI bridges. Previously they accepted a pointer to the pci_bus of the secondary bus, then looked up the bridge leading to that bus. Pass the bridge directly, which will make it more convenient for future callers. No functional change. [bhelgaas: changelog, split into separate patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2014-09-30PCI: Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources()Yinghai Lu1-1/+1
In 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources"), we added IORESOURCE_MEM_64 to the mask in pci_assign_unassigned_root_bus_resources(), but not to the mask in pci_assign_unassigned_bridge_resources(). Add IORESOURCE_MEM_64 to the pci_assign_unassigned_bridge_resources() type mask. Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.16+
2014-07-09PCI: Support BAR sizes up to 128GBYinghai Lu1-1/+1
Increase the maximum BAR size from 8GB to 128GB. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-11PCI: Merge multi-line quoted stringsRyan Desfosses1-22/+17
Merge quoted strings that are broken across lines into a single entity. The compiler merges them anyway, but checkpatch complains about it, and merging them makes it easier to grep for strings. No functional change. [bhelgaas: changelog, do the same for everything under drivers/pci] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-11PCI: Whitespace cleanupRyan Desfosses1-6/+6
Fix various whitespace errors. No functional change. [bhelgaas: fix other similar problems] Signed-off-by: Ryan Desfosses <ryan@desfo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-29Merge branches 'pci/hotplug', 'pci/pci_is_bridge' and 'pci/virtualization' ↵Bjorn Helgaas1-3/+1
into next * pci/hotplug: PCI: cpqphp: Fix possible null pointer dereference NVMe: Implement PCIe reset notification callback PCI: Notify driver before and after device reset * pci/pci_is_bridge: pcmcia: Use pci_is_bridge() to simplify code PCI: pciehp: Use pci_is_bridge() to simplify code PCI: acpiphp: Use pci_is_bridge() to simplify code PCI: cpcihp: Use pci_is_bridge() to simplify code PCI: shpchp: Use pci_is_bridge() to simplify code PCI: rpaphp: Use pci_is_bridge() to simplify code sparc/PCI: Use pci_is_bridge() to simplify code powerpc/PCI: Use pci_is_bridge() to simplify code ia64/PCI: Use pci_is_bridge() to simplify code x86/PCI: Use pci_is_bridge() to simplify code PCI: Use pci_is_bridge() to simplify code PCI: Add new pci_is_bridge() interface PCI: Rename pci_is_bridge() to pci_has_subordinate() * pci/virtualization: PCI: Introduce new device binding path using pci_dev.driver_override Conflicts: drivers/pci/pci-sysfs.c
2014-05-28PCI: Use pci_is_bridge() to simplify codeYijing Wang1-3/+1
Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c9423 PCI: Add new pci_is_bridge() interface Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-27Merge branches 'dma-api', 'pci/virtualization', 'pci/msi', 'pci/misc' and ↵Bjorn Helgaas1-67/+155
'pci/resource' into next * dma-api: iommu/exynos: Remove unnecessary "&" from function pointers DMA-API: Update dma_pool_create ()and dma_pool_alloc() descriptions DMA-API: Fix duplicated word in DMA-API-HOWTO.txt DMA-API: Capitalize "CPU" consistently sh/PCI: Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory() DMA-API: Change dma_declare_coherent_memory() CPU address to phys_addr_t DMA-API: Clarify physical/bus address distinction * pci/virtualization: PCI: Mark RTL8110SC INTx masking as broken * pci/msi: PCI/MSI: Remove pci_enable_msi_block() * pci/misc: PCI: Remove pcibios_add_platform_entries() s390/pci: use pdev->dev.groups for attribute creation PCI: Move Open Firmware devspec attribute to PCI common code * pci/resource: PCI: Add resource allocation comments PCI: Simplify __pci_assign_resource() coding style PCI: Change pbus_size_mem() return values to be more conventional PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources PCI: Support BAR sizes up to 8GB resources: Clarify sanity check message PCI: Don't add disabled subtractive decode bus resources PCI: Don't print anything while decoding is disabled PCI: Don't set BAR to zero if dma_addr_t is too small PCI: Don't convert BAR address to resource if dma_addr_t is too small PCI: Reject BAR above 4GB if dma_addr_t is too small PCI: Fail safely if we can't handle BARs larger than 4GB x86/gart: Tidy messages and add bridge device info x86/gart: Replace printk() with pr_info() x86/PCI: Move pcibios_assign_resources() annotation to definition x86/PCI: Mark ATI SBx00 HPET BAR as IORESOURCE_PCI_FIXED x86/PCI: Don't try to move IORESOURCE_PCI_FIXED resources x86/PCI: Fix Broadcom CNB20LE unintended sign extension
2014-05-23PCI: Add resource allocation commentsBjorn Helgaas1-15/+43
Add comments in the code to match the allocation strategy of 7c671426dfc3 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources"). No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-23PCI: Change pbus_size_mem() return values to be more conventionalBjorn Helgaas1-14/+21
pbus_size_mem() previously returned 0 for failure and 1 for success. Change it to return -ENOSPC for failure and 0 for success. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-23PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resourcesYinghai Lu1-51/+99
This patch changes the way we handle 64-bit prefetchable bridge windows to make it more likely that we can assign space to all devices. Previously we put all prefetchable resources in the prefetchable bridge window. If any of those resources was 32-bit only, we restricted the window to be below 4GB. After this patch, we only put 64-bit prefetchable resources in a 64-bit prefetchable window. We put all 32-bit prefetchable resources in the non-prefetchable window, even if there are no 64-bit prefetchable resources. With the previous approach, if there was a 32-bit prefetchable resource behind a bridge, we forced the bridge's prefetchable window below 4GB, which meant that even if there was plenty of space above 4GB available, we couldn't use it, and assignment of large 64-bit resources could fail, as in the bugzilla below. The new strategy is: 1) If the prefetchable window is 64 bits wide, we put only 64-bit prefetchable resources in it. Any 32-bit prefetchable resources go in the non-prefetchable window. 2) If the prefetchable window is 32 bits wide, we put both 32- and 64-bit prefetchable resources in it. 3) If there is no prefetchable window, all MMIO resources go in the non-prefetchable window. This reduces performance for 32-bit prefetchable resources below a bridge with a 64-bit prefetchable window. We previously assigned prefetchable space, but now we'll assign non-prefetchable space. This is the case even if there are no 64-bit prefetchable resources, or if they would all fit below 4GB. In those cases, the old strategy would work and would have better performance. [bhelgaas: write changelog, add bugzilla link, fold in mem64_mask removal] Link: https://bugzilla.kernel.org/show_bug.cgi?id=74151 Tested-by: Guo Chao <yan@linux.vnet.ibm.com> Tested-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-23PCI: Support BAR sizes up to 8GBAlan1-5/+10
This is needed for some of the Xeon Phi type systems. [bhelgaas: added Nikhil, use ARRAY_SIZE() to connect with decl, folded in Kevin's "order < 0" fix to ARRAY_SIZE() usage] Signed-off-by: Nikhil P Rao <nikhil.rao@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-30PCI: Remove unnecessary __ref annotationsBjorn Helgaas1-13/+12
Some PCI functions used to be marked __devinit. When CONFIG_HOTPLUG was not set, these functions were discarded after boot. A few callers of these __devinit functions were marked __ref to indicate that they could safely call the __devinit functions even though the callers were not __devinit. But CONFIG_HOTPLUG and __devinit are now gone, and the need for the __ref annotations is also gone, so remove them. Relevant historical commits: 54b956b90360 Remove __dev* markings from init.h a8e4b9c101ae PCI: add generic pci_hp_add_bridge() 0ab2b57f8db8 PCI: fix section mismatch warning in pci_scan_child_bus 451124a7cc6c PCI: fix 4x section mismatch warnings Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-11Merge branch 'pci/resource' into nextBjorn Helgaas1-8/+8
* pci/resource: PCI: Allocate 64-bit BARs above 4G when possible PCI: Enforce bus address limits in resource allocation PCI: Split out bridge window override of minimum allocation address agp/ati: Use PCI_COMMAND instead of hard-coded 4 agp/intel: Use CPU physical address, not bus address, for ioremap() agp/intel: Use pci_bus_address() to get GTTADR bus address agp/intel: Use pci_bus_address() to get MMADR bus address agp/intel: Support 64-bit GMADR agp/intel: Rename gtt_bus_addr to gtt_phys_addr drm/i915: Rename gtt_bus_addr to gtt_phys_addr agp: Use pci_resource_start() to get CPU physical address for BAR agp: Support 64-bit APBASE PCI: Add pci_bus_address() to get bus address of a BAR PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev PCI: Change pci_bus_region addresses to dma_addr_t
2013-12-21PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_devYinghai Lu1-8/+8
These interfaces: pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource) pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region) took a pci_dev, but they really depend only on the pci_bus. And we want to use them in resource allocation paths where we have the bus but not a device, so this patch converts them to take the pci_bus instead of the pci_dev: pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource) pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region) In fact, with standard PCI-PCI bridges, they only depend on the host bridge, because that's the only place address translation occurs, but we aren't going that far yet. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI: Stop clearing bridge Secondary Status when setting up I/O apertureBjorn Helgaas1-5/+5
pci_setup_bridge_io() accessed PCI_IO_BASE and PCI_IO_LIMIT using dword (32-bit) reads and writes, which also access the Secondary Status register. Since the Secondary Status register is in the upper 16 bits of the dword, and we preserved those upper 16 bits, this had the effect of clearing any of the write-1-to-clear bits that happened to be set in the Secondary Status register. That's not what we want, so use word (16-bit) accesses to update only PCI_IO_BASE and PCI_IO_LIMIT. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-13PCI: Prevent bus conflicts while checking for bridge aperturesBjorn Helgaas1-2/+4
pci_bridge_check_ranges() determines whether the bridge supports an I/O aperture and a prefetchable memory aperture. Previously, if the I/O aperture was unsupported, disabled, or configured at [io 0x0000-0x0fff], we wrote 0xf0 to PCI_IO_BASE and PCI_IO_LIMIT, which, if the bridge supports it, enables the I/O aperture at [io 0xf000-0xffff]. The enabled aperture may conflict with other devices in the system. Similarly, we wrote 0xfff0 to PCI_PREF_MEMORY_BASE and PCI_PREF_MEMORY_LIMIT, which enables the prefetchable memory aperture at [mem 0xfff00000-0xffffffff], and that may also conflict with other devices. All we need to know is whether the base and limit registers are writable, so we can use values that leave the apertures disabled, e.g., PCI_IO_BASE = 0xf0, PCI_IO_LIMIT = 0xe0, PCI_PREF_MEMORY_BASE = 0xfff0, PCI_PREF_MEMORY_LIMIT = 0xffe0. Writing non-zero values to both the base and limit registers means we detect whether either or both are writable, as we did before. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Based-on-patch-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-14PCI: Fix whitespace, capitalization, and spelling errorsBjorn Helgaas1-9/+9
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-26PCI: Pass type, width, and prefetchability for window alignmentWei Yang1-1/+1
When calculating window_alignment(), type information like IORESOURCE_MEM and IORESOURCE_PREFETCH may not be enough. For example, on powernv, we need to know whether the window is 64-bit or not. This patch passes the full resource type (res->flags) for window alignment. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
2013-09-26PCI: Use pci_is_root_bus() to check for root busWei Yang1-1/+1
In __pci_bus_size_bridges() we check whether a bus is a root bus by testing bus->self. As indicated by commit 79af72d7 ("PCI: pci_is_root_bus helper"), bus->self == NULL is not a proper way to check for a root bus. One issue is that "virtual" buses added for SR-IOV (via virtfn_add_bus()) have bus->self == NULL but are not root buses. This patch changes it to pci_is_root_bus() to check whether it is a root bus. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-04Merge tag 'pci-v3.12-changes' of ↵Linus Torvalds1-88/+88
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 23:07:00 +0300