summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-06Merge tag 'pci-v4.4-changes' of ↵Linus Torvalds1-0/+58
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ...
2015-11-03Merge branches 'pci/aer', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas1-0/+58
'pci/resource' and 'pci/virtualization' into next * pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs
2015-10-23PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratumHariprasad Shenai1-0/+57
The Chelsio T5 has a PCIe compliance erratum that causes Malformed TLP or Unexpected Completion errors in some systems, which may cause device access timeouts. Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same values for the Attribute as were supplied in the header of the corresponding Request, except as explicitly allowed when IDO is used." Instead of copying the Attributes from the Request to the Completion, the T5 always generates Completions with zero Attributes. The receiver of a Completion whose Attributes don't match the Request may accept it (which itself seems non-compliant based on sec 2.3.2), or it may handle it as a Malformed TLP or an Unexpected Completion, which will probably lead to a device access timeout. Work around this by disabling "Relaxed Ordering" and "No Snoop" in the Root Port so it always generate Requests with zero Attributes. This does affect all other devices which are downstream of that Root Port, but these are performance optimizations that should not make a functional difference. Note that Configuration Space accesses are never supposed to have TLP Attributes, so we're safe waiting till after any Configuration Space accesses to do the Root Port "fixup". Based on original work by Casey Leedom <leedom@chelsio.com> [bhelgaas: changelog, comments, rename to pci_find_pcie_root_port(), rework to use pci_upstream_bridge() and check for Root Port device type, edit diagnostics to clarify intent and devices affected] Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-09-25PCI: Use function 0 VPD for identical functions, regular VPD for othersAlex Williamson1-2/+18
932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0") added PCI_DEV_FLAGS_VPD_REF_F0. Previously, we set the flag on every non-zero function of quirked devices. If a function turned out to be different from function 0, i.e., it had a different class, vendor ID, or device ID, the flag remained set but we didn't make VPD accessible at all. Flip this around so we only set PCI_DEV_FLAGS_VPD_REF_F0 for functions that are identical to function 0, and allow regular VPD access for any other functions. [bhelgaas: changelog, stable tag] Fixes: 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Myron Stowe <myron.stowe@redhat.com> Acked-by: Mark Rustad <mark.d.rustad@intel.com> CC: stable@vger.kernel.org
2015-09-25PCI: Disable MSI on SiS 761Ondrej Zary1-0/+1
MSI is broken on SiS 761 chipset at least on PC Chips A31G board. No interrupts are delivered once MSI is enabled for a device. This causes hang on X11 start with a nVidia card installed (with nouveau driver). Disable MSI completely for this chipset. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2015-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-0/+85
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.3: API: - the AEAD interface transition is now complete. - add top-level skcipher interface. Drivers: - x86-64 acceleration for chacha20/poly1305. - add sunxi-ss Allwinner Security System crypto accelerator. - add RSA algorithm to qat driver. - add SRIOV support to qat driver. - add LS1021A support to caam. - add i.MX6 support to caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (163 commits) crypto: algif_aead - fix for multiple operations on AF_ALG sockets crypto: qat - enable legacy VFs MPI: Fix mpi_read_buffer crypto: qat - silence a static checker warning crypto: vmx - Fixing opcode issue crypto: caam - Use the preferred style for memory allocations crypto: caam - Propagate the real error code in caam_probe crypto: caam - Fix the error handling in caam_probe crypto: caam - fix writing to JQCR_MS when using service interface crypto: hash - Add AHASH_REQUEST_ON_STACK crypto: testmgr - Use new skcipher interface crypto: skcipher - Add top-level skcipher interface crypto: cmac - allow usage in FIPS mode crypto: sahara - Use dmam_alloc_coherent crypto: caam - Add support for LS1021A crypto: qat - Don't move data inside output buffer crypto: vmx - Fixing GHASH Key issue on little endian crypto: vmx - Fixing AES-CTR counter bug crypto: null - Add missing Kconfig tristate for NULL2 crypto: nx - Add forward declaration for struct crypto_aead ...
2015-08-28Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas1-1/+14
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-24PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCIZhang Rui1-0/+12
On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at function 1 doesn't work if it is powered on before the SATA controller at function 0. The result is that PATA doesn't work after resume, and we print messages like this: pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3 irq 17: nobody cared (try booting with the "irqpoll" option) Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep: Asynchronous threads for resume_noirq"). Prior to that, we powered on the functions in order, so this problem shouldn't happen. e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361") solved the problem for JMicron 361 and 363 devices. With async suspend disabled, we always power on function 0 before function 1. Barto then reported the same problem with a JMicron 368 (see comment #57 in the bugzilla). Rather than extending the blacklist piecemeal, disable async suspend for all JMicron multi-function SATA/PATA/AHCI devices. This quirk could stay in the ahci and pata_jmicron drivers, but it's likely the problem will occur even if pata_jmicron isn't loaded until after the suspend/resume. Making it a PCI quirk ensures that we'll preserve the power-on order even if the drivers aren't loaded. [bhelgaas: changelog, limit to multi-function, limit to IDE/ATA] Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551 Reported-and-tested-by: Barto <mister.freeman@laposte.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.15+
2015-08-24PCI: Set MPS to match upstream bridgeKeith Busch1-1/+2
Firmware typically configures the PCIe fabric with a consistent Max Payload Size setting based on the devices present at boot. A hot-added device typically has the power-on default MPS setting (128 bytes), which may not match the fabric. The previous Linux default, in the absence of any "pci=pcie_bus_*" options, was PCIE_BUS_TUNE_OFF, in which we never touch MPS, even for hot-added devices. Add a new default setting, PCIE_BUS_DEFAULT, in which we make sure every device's MPS setting matches the upstream bridge. This makes it more likely that a hot-added device will work in a system with optimized MPS configuration. Note that if we hot-add a device that only supports 128-byte MPS, it still likely won't work because we don't reconfigure the rest of the fabric. Booting with "pci=pcie_bus_peer2peer" is a workaround for this because it sets MPS to 128 for everything. [bhelgaas: changelog, new default, rework for pci_configure_device() path] Tested-by: Keith Busch <keith.busch@intel.com> Tested-by: Jordan Hargrave <jharg93@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2015-08-14Merge branches 'pci/hotplug', 'pci/iommu', 'pci/irq' and ↵Bjorn Helgaas1-0/+3
'pci/virtualization' into next * pci/hotplug: PCI: pciehp: Remove ignored MRL sensor interrupt events PCI: pciehp: Remove unused interrupt events PCI: pciehp: Handle invalid data when reading from non-existent devices PCI: Hold pci_slot_mutex while searching bus->slots list PCI: Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem PCI: pciehp: Simplify pcie_poll_cmd() PCI: Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot * pci/iommu: PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand PCI: Inline the ATS setup code into pci_ats_init() PCI: Rationalize pci_ats_queue_depth() error checking PCI: Reduce size of ATS structure elements PCI: Embed ATS info directly into struct pci_dev PCI: Allocate ATS struct during enumeration iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth * pci/irq: PCI: Kill off set_irq_flags() usage * pci/virtualization: PCI: Add ACS quirks for Intel I219-LM/V
2015-08-11PCI: Add ACS quirks for Intel I219-LM/VAlex Williamson1-0/+3
The Intel 100-series chipset now includes the integrated Ethernet as part of a multifunction package. The Ethernet function does not include native ACS support, but Intel confirms that the device is not capable of peer-to- peer within the package. We can therefore quirk it to expose the isolation. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: John Ronciak <john.ronciak@gmail.com>
2015-08-10PCI: Add quirk for Intel DH895xCC VF PCI config erratumTadeusz Struk1-0/+85
The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with QuickAssist Technology is prematurely terminated in hardware. Workaround the issue by hard-coding the known expected next capability pointer and saving the PCIE cap into internal buffer. Patch generated against cryptodev-2.6 Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-21PCI: Add VPD function 0 quirk for Intel Ethernet devicesMark Rustad1-0/+9
Set the PCI_DEV_FLAGS_VPD_REF_F0 flag on all Intel Ethernet device functions other than function 0, so that on multi-function devices, we will always read VPD from function 0 instead of from the other functions. [bhelgaas: changelog] Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> CC: stable@vger.kernel.org
2015-07-15PCI: Remove a broken link in quirks.cRami Rosen1-1/+0
Remove a broken link in drivers/pci/quirks.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-07-15PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirksWei Yang1-4/+4
Some quirks search for a HyperTransport capability and use a hard-coded TTL value of 48 to avoid an infinite loop. Move the definition of PCI_FIND_CAP_TTL to pci.h and use it instead of the hard-coded TTL values. [bhelgaas: changelog] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-07-14PCI: Shift PCI_CLASS_NOT_DEFINED consistently with other classesBjorn Helgaas1-5/+5
The PCI class in dev->class is a three-byte value comprising a base class, sub-class, and interface type. PCI_CLASS_NOT_DEFINED includes the base class and sub-class, but not the interface type, so it should be shifted to make space for the interface. It happens that PCI_CLASS_NOT_DEFINED is zero, so it doesn't matter in the end, but we should still use it consistently with other class definitions. Treat PCI_CLASS_NOT_DEFINED as a base class/sub-class value that should appear in bits 8-23 of dev->class. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-07-14PCI: Revert aeb30016fec3 ("PCI: add Intel USB specific reset method")Bjorn Helgaas1-24/+0
Revert aeb30016fec3 ("PCI: add Intel USB specific reset method"). We checked for "dev->class == PCI_CLASS_SERIAL_USB", but dev->class contains the entire three-byte base class/sub-class/interface, while PCI_CLASS_SERIAL_USB is only the two-byte base class/sub-class. This error meant that we used the Intel device-specific reset on devices with class code 0x000c03 instead of those with class code 0x0c03xx. 0x000c03 is a reserved value in the 0x00 backwards compatibility base class and shouldn't match any devices, so I think reset_intel_generic_dev() always failed. I considered adding a shift, but I can't test it, so it's as likely to break something as to fix something. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Yu Zhao <yu.zhao@intel.com> CC: Mathias Nyman <mathias.nyman@intel.com>
2015-07-14PCI: Fix TI816X class code quirkBjorn Helgaas1-3/+6
In fixup_ti816x_class(), we assigned "class = PCI_CLASS_MULTIMEDIA_VIDEO". But PCI_CLASS_MULTIMEDIA_VIDEO is only the two-byte base class/sub-class and needs to be shifted to make space for the low-order interface byte. Shift PCI_CLASS_MULTIMEDIA_VIDEO to set the correct class code. Fixes: 63c4408074cb ("PCI: Add quirk for setting valid class for TI816X Endpoint") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Hemant Pedanekar <hemantp@ti.com>
2015-07-14PCI: Fix generic NCR 53c810 class code quirkBjorn Helgaas1-5/+9
In the generic quirk fixup_rev1_53c810(), added by a5312e28c195 ("[PATCH] PCI: NCR 53c810 quirk"), we assigned "class = PCI_CLASS_STORAGE_SCSI". But PCI_CLASS_STORAGE_SCSI is only the two-byte base class/sub-class and needs to be shifted to make space for the low-order interface byte. Furthermore, we had a similar quirk, pci_fixup_ncr53c810(), for arch/x86, which assigned class correctly. The arch code is linked before the PCI core, so arch quirks run before generic quirks. Therefore, on x86, the x86 arch quirk ran first, and the generic quirk did nothing because it saw that dev->class was already set. But on other arches, the generic quirk set the wrong class code. Fix the generic quirk to set the correct class code and remove the now-unnecessary x86-specific quirk. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Wilcox <matthew@wil.cx>
2015-07-14PCI: Use PCI_CLASS_SERIAL_USB instead of bare numberBjorn Helgaas1-4/+6
be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device") added a quirk to override the PCI class code of the AMD Nolan device. Use PCI_CLASS_SERIAL_USB instead of a bare number to improve greppability. Also add a log message about what we're doing. No functional change except the new message. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Huang Rui <ray.huang@amd.com> CC: Jason Chang <jason.chang@amd.com> CC: Felipe Balbi <balbi@ti.com>
2015-07-14PCI: Add quirk for Intersil/Techwell TW686[4589] AV capture cardsKrzysztof =?utf-8?Q?Ha=C5=82asa?=1-0/+22
Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero) class code. Fix it. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-07-14PCI: Remove Intel Cherrytrail D3 delaysSrinidhi Kasagar1-1/+10
Just like Haswell, Intel Atom Cherrytrail does not need the default 10ms d3_delay imposed by the PCI specification. Expand quirk_remove_d3_delay() to apply to Cherrytrail devices, so we can ignore the 10ms delay before entering or exiting D3 suspend. [bhelgaas: changelog, comment] Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-23Merge tag 'pci-v4.2-changes' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.2 merge window: Enumeration - Move pci_ari_enabled() to global header (Alex Williamson) - Account for ARI in _PRT lookups (Alex Williamson) - Remove unused pci_scan_bus_parented() (Yijing Wang) Resource management - Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas) - Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas) - Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan) - Add pci_bus_addr_t (Yinghai Lu) PCI device hotplug - Wait for pciehp command completion where necessary (Alex Williamson) - Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki) - Check ignore_hotplug for all downstream devices (Rafael J. Wysocki) - Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki) - Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas) - Clean up pciehp debug logging (Bjorn Helgaas) Power management - Remove redundant PCIe port type checking (Yijing Wang) - Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang) - Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang) - Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas) - Simplify Clock Power Management setting (Bjorn Helgaas) Virtualization - Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus) MSI - Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin) - Remove unused pci_msi_off() (Bjorn Helgaas) - Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Drop pci_msi_off() calls during probe (Michael S. Tsirkin) APM X-Gene host bridge driver - Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang) - Add APM X-Gene PCIe MSI DTS nodes (Duc Dang) - Disable Configuration Request Retry Status for v1 silicon (Duc Dang) - Allow config access to Root Port even when link is down (Duc Dang) Broadcom iProc host bridge driver - Allow override of device tree IRQ mapping function (Hauke Mehrtens) - Add BCMA PCIe driver (Hauke Mehrtens) - Directly add PCI resources (Hauke Mehrtens) - Free resource list after registration (Hauke Mehrtens) Freescale i.MX6 host bridge driver - Add speed change timeout message (Troy Kisky) - Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas) Freescale Layerscape host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) - Factor out ls_pcie_establish_link() (Bjorn Helgaas) Marvell MVEBU host bridge driver - Remove mvebu_pcie_scan_bus() (Yijing Wang) NVIDIA Tegra host bridge driver - Remove tegra_pcie_scan_bus() (Yijing Wang) Synopsys DesignWare host bridge driver - Consolidate outbound iATU programming functions (Jisheng Zhang) - Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang) - Add support for x8 links (Zhou Wang) - Wait for link to come up with consistent style (Bjorn Helgaas) - Use pci_scan_root_bus() for simplicity (Yijing Wang) TI DRA7xx host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) Miscellaneous - Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas) - Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas) - Remove unused pcibios_select_root() (again) (Bjorn Helgaas) - Remove unused pci_dma_burst_advice() (Bjorn Helgaas) - xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)" * tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: pciehp: Inline the "handle event" functions into the ISR PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event() PCI: pciehp: Make queue_interrupt_event() void PCI: xgene: Allow config access to Root Port even when link is down PCI: xgene: Disable Configuration Request Retry Status for v1 silicon PCI: pciehp: Clean up debug logging x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing PCI: imx6: Add #define PCIE_RC_LCSR PCI: imx6: Use "u32", not "uint32_t" PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: imx6: Add speed change timeout message PCI/ASPM: Simplify Clock Power Management setting PCI: designware: Wait for link to come up with consistent style PCI: layerscape: Factor out ls_pcie_establish_link() PCI: layerscape: Use dw_pcie_link_up() consistently PCI: dra7xx: Use dw_pcie_link_up() consistently x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A PCI: pciehp: Wait for hotplug command completion where necessary PCI: Remove unused pci_dma_burst_advice() ...
2015-06-12Merge branches 'pci/aspm', 'pci/enumeration', 'pci/hotplug', 'pci/misc', ↵Bjorn Helgaas1-2/+4
'pci/msi', 'pci/resource' and 'pci/virtualization' into next * pci/aspm: PCI/ASPM: Simplify Clock Power Management setting PCI: Use dev->has_secondary_link to find downstream PCIe links PCI/ASPM: Use dev->has_secondary_link to find downstream links PCI: Add dev->has_secondary_link to track downstream PCIe links PCI/ASPM: Remove redundant PCIe port type checking PCI/ASPM: Drop __pci_disable_link_state() useless "force" parameter * pci/enumeration: PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: designware: Use pci_scan_root_bus() for simplicity PCI: tegra: Remove tegra_pcie_scan_bus() PCI: mvebu: Remove mvebu_pcie_scan_bus() * pci/hotplug: PCI: pciehp: Wait for hotplug command completion where necessary PCI: Propagate the "ignore hotplug" setting to parent ACPI / hotplug / PCI: Check ignore_hotplug for all downstream devices PCI: pciehp: Drop pointless label from pciehp_probe() PCI: pciehp: Drop pointless ACPI-based "slot detection" check * pci/misc: PCI: Remove unused pci_dma_burst_advice() PCI: Remove unused pcibios_select_root() (again) PCI: Remove unnecessary #includes of <asm/pci.h> PCI: Include <linux/pci.h>, not <asm/pci.h> * pci/msi: PCI/MSI: Remove unused pci_msi_off() PCI/MSI: Drop pci_msi_off() calls from quirks ntb: Drop pci_msi_off() call during probe virtio_pci: drop pci_msi_off() call during probe PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI PCI/MSI: Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() PCI/MSI: Rename msi_set_enable(), msix_clear_and_set_ctrl() * pci/resource: PCI: Add pci_bus_addr_t * pci/virtualization: ACPI / PCI: Account for ARI in _PRT lookups PCI: Move pci_ari_enabled() to global header PCI: Add function 1 DMA alias quirk for Marvell 9120 PCI: Add ACS quirks for Intel 9-series PCH root ports
2015-05-22PCI: Add function 1 DMA alias quirk for Marvell 9120Sakari Ailus1-0/+2
Marvell 9120 SATA controller has the same issue as a number of others, so use the same quirk for this one. The other quirks were added by cc346a4714a5 ("PCI: Add function 1 DMA alias quirk for Marvell devices"). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2015-05-16PCI: Add ACS quirks for Intel 9-series PCH root portsAlex Williamson1-0/+2
Intel confirms that 9-series chipset root ports provide ACS-equivalent isolation when configured via the existing Intel PCH ACS quirk setup. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Don Dugger <donald.d.dugger@intel.com>
2015-05-07PCI/MSI: Drop pci_msi_off() calls from quirksMichael S. Tsirkin1-2/+0
The PCI core now disables MSI and MSI-X for all devices during enumeration regardless of CONFIG_PCI_MSI. Remove device-specific code to disable MSI/MSI-X. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-24x86/irq: Remove sis apic bug workaroundThomas Gleixner1-7/+0
The SiS apic bug workaround is now obsolete as we cache the register values for performance reasons. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1428978610-28986-22-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-10Merge branch 'pci/misc' into nextBjorn Helgaas1-1/+1
* pci/misc: PCI: Read capability list as dwords, not bytes PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message
2015-04-08PCI: Fix typo in Thunderbolt kernel messageDarrick J. Wong1-1/+1
Fix a typo in one of the kernel messages. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-24PCI: Add ACS quirks for Intel 1G NICsAlex Williamson1-0/+32
Intel has verified that there is no peer-to-peer between functions for the below selection of 82580, 82576, 82575, I350, and 82571 multi-port devices. This adds the necessary quirks to consider the functions isolated from each other. 82571 quad-port devices are omitted due to likely lack of ACS/isolation in the onboard switch, rendering quirks for the downstream endpoints useless. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: John Ronciak <john.ronciak@intel.com>
2015-02-11Merge tag 'pci-v3.20-changes' of ↵Linus Torvalds1-0/+64
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Move domain assignment from arm64 to generic code (Lorenzo Pieralisi) - ARM: Remove artificial dependency on pci_sys_data domain (Lorenzo Pieralisi) - ARM: Move to generic PCI domains (Lorenzo Pieralisi) - Generate uppercase hex for modalias var in uevent (Ricardo Ribalda Delgado) - Add and use generic config accessors on ARM, PowerPC (Rob Herring) Resource management - Free resources on failure in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi) - Fix infinite loop with ROM image of size 0 (Michel Dänzer) PCI device hotplug - Handle surprise add even if surprise removal isn't supported (Bjorn Helgaas) Virtualization - Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition (Alex Williamson) - Add DMA alias quirk for Adaptec 3405 (Alex Williamson) - Add Wellsburg (X99) to Intel PCH root port ACS quirk (Alex Williamson) - Add ACS quirk for Emulex NICs (Vasundhara Volam) MSI - Fail MSI-X mappings if there's no space assigned to MSI-X BAR (Yijing Wang) Freescale Layerscape host bridge driver - Fix platform_no_drv_owner.cocci warnings (Julia Lawall) NVIDIA Tegra host bridge driver - Remove unnecessary tegra_pcie_fixup_bridge() (Lucas Stach) Renesas R-Car host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) TI Keystone host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) - Fix misspelling of current function in debug output (Julia Lawall) Xilinx AXI host bridge driver - Fix harmless format string warning (Arnd Bergmann) Miscellaneous - Use standard parsing functions for ASPM sysfs setters (Chris J Arges) - Add pci_device_to_OF_node() stub for !CONFIG_OF (Kevin Hao) - Delete unnecessary NULL pointer checks (Markus Elfring) - Add and use defines for PCIe Max_Read_Request_Size (Rafał Miłecki) - Include clk.h instead of clk-private.h (Stephen Boyd)" * tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Add pci_device_to_OF_node() stub for !CONFIG_OF PCI: xilinx: Convert to use generic config accessors PCI: xgene: Convert to use generic config accessors PCI: tegra: Convert to use generic config accessors PCI: rcar: Convert to use generic config accessors PCI: generic: Convert to use generic config accessors powerpc/powermac: Convert PCI to use generic config accessors powerpc/fsl_pci: Convert PCI to use generic config accessors ARM: ks8695: Convert PCI to use generic config accessors ARM: sa1100: Convert PCI to use generic config accessors ARM: integrator: Convert PCI to use generic config accessors PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver ARM: dts: versatile: add PCI controller binding of/pci: Free resources on failure in of_pci_get_host_bridge_resources() PCI: versatile: Add DT docs for ARM Versatile PB PCIe driver PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BAR r8169: use PCI define for Max_Read_Request_Size [SCSI] esas2r: use PCI define for Max_Read_Request_Size tile: use PCI define for Max_Read_Request_Size rapidio/tsi721: use PCI define for Max_Read_Request_Size ...
2015-02-04PCI: Handle read-only BARs on AMD CS553x devicesMyron Stowe1-3/+37
Some AMD CS553x devices have read-only BARs because of a firmware or hardware defect. There's a workaround in quirk_cs5536_vsa(), but it no longer works after 36e8164882ca ("PCI: Restore detection of read-only BARs"). Prior to 36e8164882ca, we filled in res->start; afterwards we leave it zeroed out. The quirk only updated the size, so the driver tried to use a region starting at zero, which didn't work. Expand quirk_cs5536_vsa() to read the base addresses from the BARs and hard-code the sizes. On Nix's system BAR 2's read-only value is 0x6200. Prior to 36e8164882ca, we interpret that as a 512-byte BAR based on the lowest-order bit set. Per datasheet sec 5.6.1, that BAR (MFGPT) requires only 64 bytes; use that to avoid clearing any address bits if a platform uses only 64-byte alignment. [bhelgaas: changelog, reduce BAR 2 size to 64] Fixes: 36e8164882ca ("PCI: Restore detection of read-only BARs") Link: https://bugzilla.kernel.org/show_bug.cgi?id=85991#c4 Link: http://support.amd.com/TechDocs/31506_cs5535_databook.pdf Link: http://support.amd.com/TechDocs/33238G_cs5536_db.pdf Reported-and-tested-by: Nix <nix@esperi.org.uk> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v.2.6.27+
2015-01-24PCI: Add Wellsburg (X99) to Intel PCH root port ACS quirkAlex Williamson1-0/+3
Intel has confirmed that the Wellsburg chipset, while not reporting ACS, does provide the proper isolation through the RCBA/BSPR registers, so the same quirk works for this set of device IDs. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Don Dugger <donald.d.dugger@intel.com>
2015-01-24PCI: Add DMA alias quirk for Adaptec 3405Alex Williamson1-0/+38
The Adaptec 3405 is actually an Intel 80333 I/O processor where the exposed device at 0e.0 is actually the address translation unit of the I/O processor and a hidden, private device at 01.0 masters the DMA for the device. Create a fixed alias between the exposed and hidden devfn so we can enable the IOMMU. Scenarios like this are potentially likely for any device incorporating this I/O processor, so this little bit of abstraction with the fixed alias table should make future additions trivial. Without this fix, booting a system with the Intel IOMMU enabled and an Adaptec 3405 at 02:0e.0 results in a flood of errors like this: dmar: DRHD: handling fault status reg 3 dmar: DMAR:[DMA Write] Request device [02:01.0] fault addr ffbff000 DMAR:[fault reason 02] Present bit in context entry is clear [bhelgaas: changelog, comment] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
2015-01-16PCI: Add ACS quirk for Emulex NICsVasundhara Volam1-0/+2
As Skyhawk and BE3-R (both multi-function devices) don't advertise the PCI-ACS capability, the vfio driver places all the functions of these devices in a single IOMMU group. Attaching (via PCI-passthru) two different Skyhawk/BE3-R partitions (nPAR, Flex, etc. PFs) using vfio, to different guests doesn't work as vfio only allows functions in *different* IOMMU groups to be assigned to different guests. As peer-to-peer access between PFs in Skyhawk/BE3-R is not possible, we can treat them as "fully isolated" even though the device doesn't advertise ACS. Add a PCI quirk for Skyhawk and BE3-R chips to fix this problem. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2015-01-16PCI: Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transitionAlex Williamson1-0/+21
Some AMD/ATI GPUs report NoSoftRst- to indicate that they perform a reset when software transitions them from D3hot to D0, but there is no apparent effect on the device: the monitor remains synced and the framebuffer contents are retained. Callers of pci_reset_function() don't necessarily have a way to validate whether a reset was effective, so we don't want to rely on NoSoftRst if it's known to be inaccurate. Returning an error in such cases appears to be the better option. For users like vfio-pci, this allows the driver to escalate to the bus reset interfaces. If a device lives on the root bus, there's really no further escalation path, so we exempt PM reset as potentially better than nothing. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
2015-01-16PCI: Mark Atheros AR93xx to avoid bus resetAlex Williamson1-0/+14
Reports against the TL-WDN4800 card indicate that PCI bus reset of this Atheros device cause system lock-ups and resets. I've also been able to confirm this behavior on multiple systems. The device never returns from reset and attempts to access config space of the device after reset result in hangs. Blacklist bus reset for the device to avoid this issue. [bhelgaas: This regression appeared in v3.14. Andreas bisected it to 425c1b223dac ("PCI: Add Virtual Channel to save/restore support"), but we don't understand the mechanism by which that commit affects the reset path.] [bhelgaas: changelog, references] Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.org Reported-by: Andreas Hartmann <andihartmann@freenet.de> Tested-by: Andreas Hartmann <andihartmann@freenet.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+
2014-11-03PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD deviceHuang Rui1-0/+20
The AMD Nolan (NL) SoC contains a DesignWare USB3 Dual-Role Device that can be operated either as a USB Host or a USB Device. In the AMD NL platform, this device ([1022:7912]) has a class code of PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will claim it. But the dwc3 driver is a more specific driver for this device, and we'd prefer to use it instead of xhci. To prevent xhci from claiming the device, change the class code to 0x0c03fe, which the PCI r3.0 spec defines as "USB device (not host controller)". The dwc3 driver can then claim it based on its Vendor and Device ID. Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jason Chang <jason.chang@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-06Merge branch 'pci/virtualization' into nextBjorn Helgaas1-0/+7
* pci/virtualization: PCI: Add ACS quirk for AMD A88X southbridge devices
2014-10-02PCI: Add ACS quirk for AMD A88X southbridge devicesMarti Raudsepp1-0/+7
AMD has confirmed that peer-to-peer between two southbridge functions does not occur. Add a quirk to indicate that these functions are isolated even though they don't have an ACS capability. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81841 Signed-off-by: Marti Raudsepp <marti@juffo.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joel Schopp <joel.schopp@amd.com>
2014-10-01Merge branches 'pci/aer' and 'pci/virtualization' into nextBjorn Helgaas1-6/+28
* pci/aer: PCI/AER: Rename PCI_ERR_UNC_TRAIN to PCI_ERR_UNC_UND PCI/AER: Add additional PCIe AER error strings trace, RAS: Add additional PCIe AER error strings trace, RAS: Replace bare numbers with #defines for PCIe AER error strings * pci/virtualization: PCI: Add ACS quirk for Intel 10G NICs
2014-09-29PCI: Add ACS quirk for Intel 10G NICsAlex Williamson1-6/+28
Intel has verified there is no peer-to-peer between functions for the below selection of 82598, 82599, and X520 10G NICs. These NICs lack an ACS capability, so we're not able to determine this isolation without the help of quirks. Generalize the Solarflare quirk and add these Intel 10G NICs. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: John Ronciak <John.ronciak@intel.com>
2014-09-25Merge branches 'pci/enumeration', 'pci/virtualization' and 'pci/cleanup' ↵Bjorn Helgaas1-51/+17
into next * pci/enumeration: PCI: Generate uppercase hex for modalias interface class * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9120 & SFC9140 PCI: Remove unused pci_get_dma_source() PCI: Remove unused pci_find_upstream_pcie_bridge() * pci/cleanup: PCI: Remove assignment from complicated "if" conditions PCI: Remove assignment from "if" conditions PCI: Remove unnecessary curly braces PCI: Add space before open parenthesis
2014-09-23PCI: Add ACS quirk for Solarflare SFC9120 & SFC9140Alex Williamson1-0/+17
Solarflare confirms that these devices do not allow peer-to-peer between functions. Quirk them to allow IOMMU grouping to expose this isolation. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Robert Stonehouse <rstonehouse@solarflare.com>
2014-09-23PCI: Remove unused pci_get_dma_source()Alex Williamson1-51/+0
pci_get_dma_source() is unused, so remove it. We now have dma_alias_devfn() to describe this. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-22Merge branches 'pci/enumeration', 'pci/misc' and 'pci/virtualization' into nextBjorn Helgaas1-0/+22
* pci/enumeration: PCI: Enable CRS Software Visibility for root port if it is supported PCI: Check only the Vendor ID to identify Configuration Request Retry * pci/misc: PCI: Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters PCI: Increase IBM ipr SAS Crocodile BARs to at least system page size PCI/AER: Make <linux/aer.h> standalone includable * pci/virtualization: PCI: Use device flag helper functions xen/pciback: Use PCI device flag helper functions KVM: Use PCI device flag helper functions PCI: Add device flag helper functions PCI: Assume all Mellanox devices have broken INTx masking
2014-09-17PCI: Increase IBM ipr SAS Crocodile BARs to at least system page sizeDouglas Lehr1-0/+20
The Crocodile chip occasionally comes up with 4k and 8k BAR sizes. Due to an erratum, setting the SR-IOV page size causes the physical function BARs to expand to the system page size. Since ppc64 uses 64k pages, when Linux tries to assign the smaller resource sizes to the now 64k BARs the address will be truncated and the BARs will overlap. Force Linux to allocate the resource as a full page, which avoids the overlap. [bhelgaas: print expanded resource, too] Signed-off-by: Douglas Lehr <dllehr@us.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Milton Miller <miltonm@us.ibm.com> CC: stable@vger.kernel.org
2014-09-08PCI: Assume all Mellanox devices have broken INTx maskingGavin Shan1-0/+2
The VFIO driver routes LSI interrupts by capturing, masking, and then delivering. When passing though Mellanox adapters from host to guest, interrupt storm are reported from host and guest. That's because the PCI command register INTx Disable bit doesn't work on Mellanox devices. # lspci | grep Mellanox 0001:05:00.0 Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3] 0005:01:00.0 Ethernet controller: Mellanox Technologies MT26448 [ConnectX EN 10GigE, PCIe 2.0 5GT/s] (rev b0) Amir Vadai confirmed that all Mellanox devices have same problem. The patch marks broken INTx masking for all Mellanox adapters. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-By: Amir Vadai <amirv@mellanox.com>
2014-08-05Merge tag 'char-misc-3.17-rc1' of ↵Linus Torvalds1-0/+104
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver patches from Greg KH: "Here's the big driver misc / char pull request for 3.17-rc1. Lots of things in here, the thunderbolt support for Apple laptops, some other new drivers, testing fixes, and other good things. All have been in linux-next for a long time" * tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits) misc: bh1780: Introduce the use of devm_kzalloc Lattice ECP3 FPGA: Correct endianness drivers/misc/ti-st: Load firmware from ti-connectivity directory. dt-bindings: extcon: Add support for SM5502 MUIC device extcon: sm5502: Change internal hardware switch according to cable type extcon: sm5502: Detect cable state after completing platform booting extcon: sm5502: Add support new SM5502 extcon device driver extcon: arizona: Get MICVDD against extcon device extcon: Remove unnecessary OOM messages misc: vexpress: Fix sparse non static symbol warnings mei: drop unused hw dependent fw status functions misc: bh1770glc: Use managed functions pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage misc: remove DEFINE_PCI_DEVICE_TABLE usage ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use drivers/char/dsp56k.c: drop check for negativity of unsigned parameter mei: fix return value on disconnect timeout mei: don't schedule suspend in pm idle mei: start disconnect request timer consistently mei: reset client connection state on timeout ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 12:50:56 +0300