summaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2009-06-19PCI: drivers/pci/slot.c should depend on CONFIG_SYSFSAlex Chiang1-1/+1
There is no way to interact with a physical PCI slot without sysfs, so encode the dependency and prevent this build error: drivers/pci/slot.c: In function 'pci_hp_create_module_link': drivers/pci/slot.c:327: error: 'module_kset' undeclared This patch _should_ make pci-sysfs.o depend on CONFIG_SYSFS too, but we cannot (yet) because the PCI core merrily assumes the existence of sysfs: drivers/built-in.o: In function `pci_bus_add_device': drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files' drivers/built-in.o: In function `pci_stop_dev': drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files' So do the minimal bit for now and figure out how to untangle it later. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fix-suggested-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11PCI Hotplug: cpqphp: don't use pci_find_slot()Alex Chiang1-1/+1
Convert uses of pci_find_slot to modern API. In the conversion sites, we end up calling pci_dev_put() right away. This may seem like it misses the entire point of doing something like pci_get_bus_and_slot(), since we drop the reference so soon, but it turns out we don't actually do much with the returned pci_dev. I plan on untangling cpqphp further, but clearly cpqphp never worried too much about a properly refcounted pci_dev anyway. For now, this conversion seems reasonable, as it gets rid of the last in-tree caller of pci_find_slot. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-12powerpc/pseries: The RPA PCI hotplug driver depends on EEHMichael Ellerman1-1/+1
The RPA PCI hotplug driver calls EEH routines, so should depend on EEH. Also PPC_PSERIES implies PPC64, so remove that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-21PCI Hotplug: the ibm driver is not dependant on PCI_LEGACYGreg Kroah-Hartman1-1/+1
This was marked incorrectly for some reason. Allow the ibmphp driver to be built even if PCI_LEGACY is not enabled. Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-21PCI Hotplug: make cpcihp driver use modern apisGreg Kroah-Hartman1-1/+1
This removes the depandancy of the cpcihp driver from the PCI_LEGACY config option by removing its usage of the pci_find_bus() function. Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02PCI: hotplug: remove ExperimentalKristen Carlson Accardi1-2/+2
Remove EXPERIMENTAL from PCI Hot Plug. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-06PCI: Add Kconfig option to disable deprecated pci_find_* APIJeff Garzik1-3/+3
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-03PCI hotplug: Use menuconfig objectsJan Engelhardt1-15/+10
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Scott Murray <scottm@somanetworks.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-08shpchp: remove CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODEKenji Kaneshige1-9/+0
The CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE config option is not needed because polling mechanism for shpc hotplug events can be enabled through module option 'shpchp_poll_mode'. This patch removes CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-10[PATCH] Kconfig refactoring for better menu nestingDon Mullis1-1/+2
Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis <dwm@meer.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04Still more typo fixesMatt LaPlante1-1/+1
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-08-21Merge trivial low-risk suspend hotkey bugzilla-5918 into releaseLen Brown1-1/+1
2006-08-16ACPIPHP: allow acpiphp to build without ACPI_DOCKKristen Carlson Accardi1-1/+1
Change the build options for acpiphp so that it may build without being dependent on the ACPI_DOCK option, but yet does not allow the option of acpiphp being built-in when dock is built as a module. This does not change the previous patch for ACPI_IBM_DOCK Kconfig. For the following matrix of config options, I built an i386 kernel. Dock acpiphp should it build? confirmed y y y y y n y y y m y y m y no - acpiphp should acpiphp was convert to m converted to m m n y y m m y y n y y y n n y y n m y y Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-12PCI: remove dead HOTPLUG_PCI_SHPC_PHPRM_LEGACY option.Dave Jones1-7/+0
Nothing in the tree references this config option. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-11Merge branch 'release' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: ACPI_DOCK: Initialize the atomic notifier list ACPI: acpi_os_allocate() fixes ACPI: SBS: fix initialization, sem2mutex ACPI: add 'const' to several ACPI file_operations ACPI: delete some defaults from ACPI Kconfig ACPI: "Device `[%s]' is not power manageable" make message debug only ACPI: ACPI_DOCK Kconfig Revert "Revert "ACPI: dock driver"" ACPI: acpi_os_get_thread_id() returns current ACPI: ACPICA 20060707
2006-07-11[PATCH] don't select CONFIG_HOTPLUGAndrew Morton1-2/+1
It's useful to be able to turn off CONFIG_HOTPLUG for compile-coverage testing and for section-checking coverage. But a few things go and select CONFIG_HOTPLUG, making it a royal PITA to turn the thing off. It's only turnable offable if CONFIG_EMBEDDED anyway. So let's make those things depend on HOTPLUG, not select it. Cc: Greg KH <greg@kroah.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10ACPI: ACPI_DOCK KconfigLen Brown1-1/+1
HOTPLUG_PCI_ACPI depends on ACPI_DOCK ACPI_IBM_DOCK depends on ACPI_DOCK=n ACPI_DOCK is EXPERIMENTAL, though that doesn't seem to mean much Signed-off-by: Len Brown <len.brown@intel.com>
2006-02-01[PATCH] PCI Hotplug: fix up Kconfig help textPavel Machek1-2/+1
Remove reference to pcihpfs that no longer exists. Signed-off-by: Pavel Machek <pavel@suse.cz>
2005-08-24[ACPI] delete CONFIG_ACPI_BUSLen Brown1-2/+2
it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-07[IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver codePrarit Bhargava1-2/+3
This patch is the SGI hotplug driver and additional changes required for the driver. These modifications include changes to the SN io_init.c code for memory management, the inclusion of new SAL calls to enable and disable PCI slots, and a hotplug-style driver. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-17Linux-2.6.12-rc2Linus Torvalds1-0/+197
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!