summaryrefslogtreecommitdiff
path: root/drivers/parport
AgeCommit message (Collapse)AuthorFilesLines
2022-03-18parport_pc: Also enable driver for PCI systemsMaciej W. Rozycki1-2/+2
Nowadays PC-style parallel ports come in the form of PCI and PCIe option cards and there are some combined parallel/serial option cards as well that we handle in the parport subsystem. There is nothing in particular that would prevent them from being used in any system equipped with PCI or PCIe connectivity, except that we do not permit the PARPORT_PC config option to be selected for platforms for which ARCH_MIGHT_HAVE_PC_PARPORT has not been set for. The only PCI platforms that actually can't make use of PC-style parallel port hardware are those newer PCIe systems that have no support for I/O cycles in the host bridge, required by such parallel ports. Notably, this includes the s390 arch, which has port I/O accessors that cause compilation warnings (promoted to errors with `-Werror'), and there are other cases such as the POWER9 PHB4 device, though this one has variable port I/O accessors that depend on the particular system. Also it is not clear whether the serial port side of devices enabled by PARPORT_SERIAL uses port I/O or MMIO. Finally Super I/O solutions are always either ISA or platform devices. Make the PARPORT_PC option selectable also for PCI systems then, except for the s390 arch, however limit the availability of PARPORT_PC_SUPERIO to platforms that enable ARCH_MIGHT_HAVE_PC_PARPORT. Update platforms accordingly for the required <asm/parport.h> header. Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2202141955550.34636@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-02Merge tag 'for-5.15/parisc' of ↵Linus Torvalds1-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: - Fix a kernel crash when a signal is delivered to bad userspace stack - Fix fall-through warnings in math-emu code - Increase size of gcc stack frame check - Switch coding from 'pci_' to 'dma_' API - Make struct parisc_driver::remove() return void - Some parisc related Makefile changes - Minor cleanups, e.g. change to octal permissions, fix macro collisions, fix PMD_ORDER collision, replace spaces with tabs * tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: math-emu: Fix fall-through warnings parisc: fix crash with signals and alloca parisc: Fix compile failure when building 64-bit kernel natively parisc: ccio-dma.c: Added tab instead of spaces parisc/parport_gsc: switch from 'pci_' to 'dma_' API parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild parisc: switch from 'pci_' to 'dma_' API parisc: Make struct parisc_driver::remove() return void parisc: remove unused arch/parisc/boot/install.sh and its phony target parisc: Rename PMD_ORDER to PMD_TABLE_ORDER parisc: math-emu: Avoid "fmt" macro collision parisc: Increase size of gcc stack frame check parisc: Replace symbolic permissions with octal permissions
2021-08-30parisc/parport_gsc: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-3/+2
The wrappers in include/linux/pci-dma-compat.h should go away. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2021-08-30parisc: Make struct parisc_driver::remove() return voidUwe Kleine-König1-2/+1
The caller of this function (parisc_driver_remove() in arch/parisc/kernel/drivers.c) ignores the return value, so better don't return any value at all to not wake wrong expectations in driver authors. The only function that could return a non-zero value before was ipmi_parisc_remove() which returns the return value of ipmi_si_remove_by_dev(). Make this function return void, too, as for all other callers the value is ignored, too. Also fold in a small checkpatch fix for: WARNING: Unnecessary space before function pointer arguments + void (*remove) (struct parisc_device *dev); Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-08-27parport: remove non-zero check on countColin Ian King1-1/+1
The check for count appears to be incorrect since a non-zero count check occurs a couple of statements earlier. Currently the check is always false and the dev->port->irq != PARPORT_IRQ_NONE part of the check is never tested and the if statement is dead-code. Fix this by removing the check on count. Note that this code is pre-git history, so I can't find a sha for it. Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Logically dead code") Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-29parport: serial: Retrieve IRQ vector with help of special getterAndy Shevchenko1-1/+3
pci_irq_vector() may be used to retrieve IRQ vector for a PCI device. Use it instead of direct access. Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210721150216.64823-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-29parport: serial: Get rid of IRQ_NONE abuseAndy Shevchenko1-2/+3
IRQ_NONE definition is solely for IRQ handlers and not for generic probe code. Replace it with plain integer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210721150216.64823-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21parport: Use string_upper() instead of open coded variantAndy Shevchenko1-8/+3
Use string_upper() from string helper module instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210518133458.20403-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-07treewide: remove editor modelines and cruftMasahiro Yamada1-12/+0
The section "19) Editor modelines and other cruft" in Documentation/process/coding-style.rst clearly says, "Do not include any of these in source files." I recently receive a patch to explicitly add a new one. Let's do treewide cleanups, otherwise some people follow the existing code and attempt to upstream their favoriate editor setups. It is even nicer if scripts/checkpatch.pl can check it. If we like to impose coding style in an editor-independent manner, I think editorconfig (patch [1]) is a saner solution. [1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/ Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky5-5/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-22parport: fix a kernel-doc markupMauro Carvalho Chehab1-1/+1
The kernel-doc markup inside share.c is actually for __parport_register_driver. The actual goal seems to be to document parport_register_driver(). So, fix the existing markup and add a new one. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/dc0778af8c466cc667409ead05876a5cfd3cbece.1610610937.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2-4/+4
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds15-636/+368
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig1-21/+18
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-23parport: remove use of devmodelSudip Mukherjee1-53/+28
Now that all the drivers using parallel port has been converted to use device model, there is no driver left which has devmodel as false. Remove the part of the code which expects devmodel can be false. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-11-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport: remove unused parport_register_device()Sudip Mukherjee1-192/+0
All the drivers that are using parallel port has been converted to use the new device model api, and parport_register_device() is no longer used. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-10-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport: Add comments for parport_register_dev_model()Sudip Mukherjee1-0/+62
In preparation to remove parport_register_device(), copy the comments to parport_register_dev_model() and modify the parameters according to what parport_register_dev_model() has. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-9-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport: Standardize use of printmodeJoe Perches3-11/+17
Standardize the define and the uses of printmode. Miscellanea: o Add missing statement termination ; where necessary Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-8-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport_pc: Convert DPRINTK to pr_debugJoe Perches1-16/+7
Use a more common logging style. Miscellanea: o One message converted from KERN_INFO to KERN_DEBUG Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-7-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport_mfc3: Convert DPRINTK to pr_debugJoe Perches1-12/+7
Use a more common logging style. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-6-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport_amiga: Convert DPRINTK to pr_debugJoe Perches1-13/+7
Use a more common logging style. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-5-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport: daisy: Convert DPRINTK to pr_debugJoe Perches1-17/+6
Use a more common logging style. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-4-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport: Use more comon logging stylesJoe Perches6-117/+108
Some of the logging can be poorly formatted because of unexpected line breaks given printks without KERN_CONT that should be pr_cont. Miscellanea: o Remove unnecessary spaces between function name and open parenthesis o Convert bare printks to pr_<level> where appropriate o Convert embedded function names to use %s, __func__ o Coalesce formats o Realign arguments o Use do {} while (0) in a macro and not a bare if Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-3-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport: Convert printk(KERN_<LEVEL> to pr_<level>(Joe Perches13-146/+110
Use the more common kernel style. Miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-2-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23parport: fix if-statement empty body warningsJoe Perches2-100/+57
Eliminate warnings by using pr_debug which is the more typical kernel debugging style and also enable dynamic_debug on these outputs. Miscellaneous: o A few messages were logged at KERN_INFO when enabled, now KERN_DEBUG o Convert %d/%d to %zd/%zu to avoid compilation warnings Original-patch-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20200403134325.11523-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13parport: daisy: use new parport device modelSudip Mukherjee1-1/+39
Modify parport daisy driver to use the new parallel port device model. Last attempt was '1aec4211204d ("parport: daisy: use new parport device model")' which failed as daisy was also trying to load the low level driver and that resulted in a deadlock. Cc: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20191016144540.18810-4-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13parport: load lowlevel driver if ports not foundSudip Mukherjee1-0/+21
Usually all the distro will load the parport low level driver as part of their initialization. But we can get into a situation where all the parallel port drivers are built as module and we unload all the modules at a later time. Then if we just do "modprobe parport" it will only load the parport module and will not load the low level driver which will actually register the ports. So, check the bus if there is any parport registered, if not, load the low level driver. We can get into the above situation with all distro but only Suse has setup the alias for "parport_lowlevel" and so it only works in Suse. Users of Debian based distro will need to load the lowlevel module manually. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13parport: do not check portlist when using device-modelSudip Mukherjee1-3/+2
We do not need to maintain a list of ports when we are using the device-model. The base layer is going to maintain the list for us and we can get the list of ports just using bus_for_each_dev(). Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-2-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13parport: daisy: avoid hardcoded nameSudip Mukherjee1-1/+1
The daisy device name is hardcoded, define it in the header file and use it in the code. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-18Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
2019-09-04parport: parport_serial: Add support for Sunix Multi I/O boardsKai-Heng Feng1-12/+32
Sunix Multi I/O boards are different to Timedia's. This patch adds proper support for Sunix MIO boards with 1 parallel and up to 4 serial ports. Cc: Morris Ku <morris_ku@sunix.com> Cc: Debbie Liu <debbie_liu@sunix.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20190809190130.30773-2-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05parport: parport_serial: Use dev_get_drvdataChuhong Yuan1-4/+2
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20190801191408.10977-3-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05parport: Add missing newline at end of fileGeert Uytterhoeven1-1/+1
"git diff" says: \ No newline at end of file after modifying the file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20190801191408.10977-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14docs: kbuild: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-08Merge tag 'char-misc-5.2-rc4' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner2-29/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24parport: Fix mem leak in parport_register_dev_modelYueHaibing1-0/+2
BUG: memory leak unreferenced object 0xffff8881df48cda0 (size 16): comm "syz-executor.0", pid 5077, jiffies 4295994670 (age 22.280s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d2d0d5fe>] parport_register_dev_model+0x141/0x6e0 [parport] [<00000000782f6dab>] 0xffffffffc15d1196 [<00000000d2ca6ae4>] platform_drv_probe+0x7e/0x100 [<00000000628c2a94>] really_probe+0x342/0x4d0 [<000000006874f5da>] driver_probe_device+0x8c/0x170 [<00000000424de37a>] __device_attach_driver+0xda/0x100 [<000000002acab09a>] bus_for_each_drv+0xfe/0x170 [<000000003d9e5f31>] __device_attach+0x190/0x230 [<0000000035d32f80>] bus_probe_device+0x123/0x140 [<00000000a05ba627>] device_add+0x7cc/0xce0 [<000000003f7560bf>] platform_device_add+0x230/0x3c0 [<000000002a0be07d>] 0xffffffffc15d0949 [<000000007361d8d2>] port_check+0x3b/0x50 [parport] [<000000004d67200f>] bus_for_each_dev+0x115/0x180 [<000000003ccfd11c>] __parport_register_driver+0x1f0/0x210 [parport] [<00000000987f06fc>] 0xffffffffc15d803e After commit 4e5a74f1db8d ("parport: Revert "parport: fix memory leak""), free_pardevice do not free par_dev->state, we should free it in error path of parport_register_dev_model before return. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 4e5a74f1db8d ("parport: Revert "parport: fix memory leak"") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner5-0/+5
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09Merge tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-8/+10
Pull DMA mapping updates from Christoph Hellwig: - remove the already broken support for NULL dev arguments to the DMA API calls - Kconfig tidyups * tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence dma-mapping: remove an unnecessary NULL check x86/dma: Remove the x86_dma_fallback_dev hack dma-mapping: remove leftover NULL device support arm: use a dummy struct device for ISA DMA use of the DMA API pxa3xx-gcu: pass struct device to dma_mmap_coherent gbefb: switch to managed version of the DMA allocator da8xx-fb: pass struct device to DMA API functions parport_ip32: pass struct device to DMA API functions dma: select GENERIC_ALLOCATOR for DMA_REMAP
2019-04-25parport: ieee1284: mark expected switch fall-throughGustavo A. R. Silva1-1/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/parport/ieee1284.c: In function ‘parport_read’: drivers/parport/ieee1284.c:722:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (parport_negotiate (port, IEEE1284_MODE_NIBBLE)) { ^ drivers/parport/ieee1284.c:726:2: note: here case IEEE1284_MODE_NIBBLE: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08parport_ip32: pass struct device to DMA API functionsChristoph Hellwig1-8/+10
The DMA API generally relies on a struct device to work properly, and only barely works without one for legacy reasons. Pass the easily available struct device from the platform_device to remedy this. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-01Merge 5.1-rc3 into char-misc-nextGreg Kroah-Hartman3-41/+3
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27parport_cs: Fix memory leak in parport_configYueHaibing1-2/+3
parport_probe() alloc parport device 'info', but while parport_config failed it does not free it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26Revert "parport: daisy: use new parport device model"Linus Torvalds3-41/+3
This reverts commit 1aec4211204d9463d1fd209eb50453de16254599. Steven Rostedt reports that it causes a hang at bootup and bisected it to this commit. The troigger is apparently a module alias for "parport_lowlevel" that points to "parport_pc", which causes a hang with modprobe -q -- parport_lowlevel blocking forever with a backtrace like this: wait_for_completion_killable+0x1c/0x28 call_usermodehelper_exec+0xa7/0x108 __request_module+0x351/0x3d8 get_lowlevel_driver+0x28/0x41 [parport] __parport_register_driver+0x39/0x1f4 [parport] daisy_drv_init+0x31/0x4f [parport] parport_bus_init+0x5d/0x7b [parport] parport_default_proc_register+0x26/0x1000 [parport] do_one_initcall+0xc2/0x1e0 do_init_module+0x50/0x1d4 load_module+0x1c2e/0x21b3 sys_init_module+0xef/0x117 Supid says: "Due to the new device model daisy driver will now try to find the parallel ports while trying to register its driver so that it can bind with them. Now, since daisy driver is loaded while parport bus is initialising the list of parport is still empty and it tries to load the lowlevel driver, which has an alias set to parport_pc, now causes a deadlock" But I don't think the daisy driver should be loaded by the parport initialization in the first place, so let's revert the whole change. If the daisy driver can just initialize separately on its own (like a driver should), instead of hooking into the parport init sequence directly, this issue probably would go away. Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reported-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-13parport: daisy: use new parport device modelSudip Mukherjee3-3/+41
Modify parport daisy driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>