| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Appending sysfs files to the controller kobject is a bit clunky and
becomes a maintenance problem as more attributes are added. The
attribute group infrastructure handles this better, so use that.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We cannot detect a (perhaps buggy) controller that is sending us
a completion for a request that was already completed (for example
sending a completion twice), this phenomenon was seen in the wild
a few times.
So to protect against this, we use the upper 4 msbits of the nvme sqe
command_id to use as a 4-bit generation counter and verify it matches
the existing request generation that is incrementing on every execution.
The 16-bit command_id structure now is constructed by:
| xxxx | xxxxxxxxxxxx |
gen request tag
This means that we are giving up some possible queue depth as 12 bits
allow for a maximum queue depth of 4095 instead of 65536, however we
never create such long queues anyways so no real harm done.
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We already validate it when receiving the c2hdata pdu header
and this is not changing so this is a redundant check.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We are going to use the upper 4-bits of the command_id for a generation
counter, so enforce the new queue depth upper limit. As we enforce
both min and max queue depth, use param_set_uint_minmax istead of
open coding it.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just check inode_unhashed on the whole device bdev inode instead,
and provide a helper to check for that information.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the nvme-internal NVME_NSHEAD_DISK_LIVE flag instead of abusing
the block layer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Early probe failure never reaches nvme_ns_remove, so GENHD_FL_UP must
be set at this point. Remove the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
.. and rename the function to disk_update_readahead. This is in
preparation for moving the BDI from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210809141744.1203023-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- tracing fix (Keith Busch)
- fix multipath head refcounting (Hannes Reinecke)
- Write Zeroes vs PI fix (me)
- drop a bogus WARN_ON (Zhihao Cheng)
- Increase max blk-cgroup policy size, now that mq-deadline
uses it too (Oleksandr)
* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
nvme: set the PRACT bit when using Write Zeroes with T10 PI
nvme: fix nvme_setup_command metadata trace event
nvme: fix refcounting imbalance when all paths are down
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
block: increase BLKCG_MAX_POLS
|
|
When using Write Zeroes on a namespace that has protection
information enabled they behavior without the PRACT bit
counter-intuitive and will generally lead to validation failures
when reading the written blocks. Fix this by always setting the
PRACT bit that generates matching PI data on the fly.
Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The metadata address is set after the trace event, so the trace is not
capturing anything useful. Rather than logging the memory address, it's
useful to know if the command carries a metadata payload, so change the
trace event to log that true/false state instead.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When the last path to a ns_head drops the current code
removes the ns_head from the subsystem list, but will only
delete the disk itself if the last reference to the ns_head
drops. This is causing an refcounting imbalance eg when
applications have a reference to the disk, as then they'll
never get notified that the disk is in fact dead.
This patch moves the call 'del_gendisk' into nvme_mpath_check_last_path(),
ensuring that the disk can be properly removed and applications get the
appropriate notifications.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Followling process:
nvme_probe
nvme_reset_ctrl
nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING)
queue_work(nvme_reset_wq, &ctrl->reset_work)
--------------> nvme_remove
nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING)
worker_thread
process_one_work
nvme_reset_work
WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)
, which will trigger WARN_ON in nvme_reset_work():
[ 127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594
[ 127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0
[ 127.552518] Call Trace:
[ 127.552840] ? kvm_sched_clock_read+0x25/0x40
[ 127.553936] ? native_send_call_func_single_ipi+0x1c/0x30
[ 127.555117] ? send_call_function_single_ipi+0x9b/0x130
[ 127.556263] ? __smp_call_single_queue+0x48/0x60
[ 127.557278] ? ttwu_queue_wakelist+0xfa/0x1c0
[ 127.558231] ? try_to_wake_up+0x265/0x9d0
[ 127.559120] ? ext4_end_io_rsv_work+0x160/0x290
[ 127.560118] process_one_work+0x28c/0x640
[ 127.561002] worker_thread+0x39a/0x700
[ 127.561833] ? rescuer_thread+0x580/0x580
[ 127.562714] kthread+0x18c/0x1e0
[ 127.563444] ? set_kthread_struct+0x70/0x70
[ 127.564347] ret_from_fork+0x1f/0x30
The preceding problem can be easily reproduced by executing following
script (based on blktests suite):
test() {
pdev="$(_get_pci_dev_from_blkdev)"
sysfs="/sys/bus/pci/devices/${pdev}"
for ((i = 0; i < 10; i++)); do
echo 1 > "$sysfs/remove"
echo 1 > /sys/bus/pci/rescan
done
}
Since the device ctrl could be updated as an non-RESETTING state by
repeating probe/remove in userspace (which is a normal situation), we
can replace stack dumping WARN_ON with a warnning message.
Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix various races in nvme-pci when shutting down just after
probing (Casey Chen)
- fix a net_device leak in nvme-tcp (Prabhakar Kushwaha)
- Fix regression in xen-blkfront by cleaning up the removal state
machine (Christoph)
- Fix tag_set and queue cleanup ordering regression in nbd (Wang)
- Fix tag_set and queue cleanup ordering regression in pd (Guoqing)
* tag 'block-5.14-2021-07-16' of git://git.kernel.dk/linux-block:
xen-blkfront: sanitize the removal state machine
nbd: fix order of cleaning up the queue and freeing the tagset
pd: fix order of cleaning up the queue and freeing the tagset
nvme-pci: do not call nvme_dev_remove_admin from nvme_remove
nvme-pci: fix multiple races in nvme_setup_io_queues
nvme-tcp: use __dev_get_by_name instead dev_get_by_name for OPT_HOST_IFACE
|
|
nvme_dev_remove_admin could free dev->admin_q and the admin_tagset
while they are being accessed by nvme_dev_disable(), which can be called
by nvme_reset_work via nvme_remove_dead_ctrl.
Commit cb4bfda62afa ("nvme-pci: fix hot removal during error handling")
intended to avoid requests being stuck on a removed controller by killing
the admin queue. But the later fix c8e9e9b7646e ("nvme-pci: unquiesce
admin queue on shutdown"), together with nvme_dev_disable(dev, true)
right before nvme_dev_remove_admin() could help dispatch requests and
fail them early, so we don't need nvme_dev_remove_admin() any more.
Fixes: cb4bfda62afa ("nvme-pci: fix hot removal during error handling")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Below two paths could overlap each other if we power off a drive quickly
after powering it on. There are multiple races in nvme_setup_io_queues()
because of shutdown_lock missing and improper use of NVMEQ_ENABLED bit.
nvme_reset_work() nvme_remove()
nvme_setup_io_queues() nvme_dev_disable()
... ...
A1 clear NVMEQ_ENABLED bit for admin queue lock
retry: B1 nvme_suspend_io_queues()
A2 pci_free_irq() admin queue B2 nvme_suspend_queue() admin queue
A3 pci_free_irq_vectors() nvme_pci_disable()
A4 nvme_setup_irqs(); B3 pci_free_irq_vectors()
... unlock
A5 queue_request_irq() for admin queue
set NVMEQ_ENABLED bit
...
nvme_create_io_queues()
A6 result = queue_request_irq();
set NVMEQ_ENABLED bit
...
fail to allocate enough IO queues:
A7 nvme_suspend_io_queues()
goto retry
If B3 runs in between A1 and A2, it will crash if irqaction haven't
been freed by A2. B2 is supposed to free admin queue IRQ but it simply
can't fulfill the job as A1 has cleared NVMEQ_ENABLED bit.
Fix: combine A1 A2 so IRQ get freed as soon as the NVMEQ_ENABLED bit
gets cleared.
After solved #1, A2 could race with B3 if A2 is freeing IRQ while B3
is checking irqaction. A3 also could race with B2 if B2 is freeing
IRQ while A3 is checking irqaction.
Fix: A2 and A3 take lock for mutual exclusion.
A3 could race with B3 since they could run free_msi_irqs() in parallel.
Fix: A3 takes lock for mutual exclusion.
A4 could fail to allocate all needed IRQ vectors if A3 and A4 are
interrupted by B3.
Fix: A4 takes lock for mutual exclusion.
If A5/A6 happened after B2/B1, B3 will crash since irqaction is not NULL.
They are just allocated by A5/A6.
Fix: Lock queue_request_irq() and setting of NVMEQ_ENABLED bit.
A7 could get chance to pci_free_irq() for certain IO queue while B3 is
checking irqaction.
Fix: A7 takes lock.
nvme_dev->online_queues need to be protected by shutdown_lock. Since it
is not atomic, both paths could modify it using its own copy.
Co-developed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
dev_get_by_name() finds network device by name but it also increases the
reference count.
If a nvme-tcp queue is present and the network device driver is removed
before nvme_tcp, we will face the following continuous log:
"kernel:unregister_netdevice: waiting for <eth> to become free. Usage count = 2"
And rmmod further halts. Similar case arises during reboot/shutdown
with nvme-tcp queue present and both never completes.
To fix this, use __dev_get_by_name() which finds network device by
name without increasing any reference counter.
Fixes: 3ede8f72a9a2 ("nvme-tcp: allow selecting the network interface for connections")
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
[hch: remove the ->ndev member entirely]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
|
|
We don't have an nvme status to report if the driver's .queue_rq()
returns an error without dispatching the requested nvme command. Check
the return value from blk_execute_rq() for all passthrough commands so
the caller may know their command was not successful.
If the command is from the target passthrough interface and fails to
dispatch, synthesize the response back to the host as a internal target
error.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-5-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The generic blk_execute_rq() knows how to handle polled completions. Use
that instead of implementing an nvme specific handler.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-3-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
|
|
Pull core block updates from Jens Axboe:
- disk events cleanup (Christoph)
- gendisk and request queue allocation simplifications (Christoph)
- bdev_disk_changed cleanups (Christoph)
- IO priority improvements (Bart)
- Chained bio completion trace fix (Edward)
- blk-wbt fixes (Jan)
- blk-wbt enable/disable fix (Zhang)
- Scheduler dispatch improvements (Jan, Ming)
- Shared tagset scheduler improvements (John)
- BFQ updates (Paolo, Luca, Pietro)
- BFQ lock inversion fix (Jan)
- Documentation improvements (Kir)
- CLONE_IO block cgroup fix (Tejun)
- Remove of ancient and deprecated block dump feature (zhangyi)
- Discard merge fix (Ming)
- Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas,
Yang)
* tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits)
block: fix discard request merge
block/mq-deadline: Remove a WARN_ON_ONCE() call
blk-mq: update hctx->dispatch_busy in case of real scheduler
blk: Fix lock inversion between ioc lock and bfqd lock
bfq: Remove merged request already in bfq_requests_merged()
block: pass a gendisk to bdev_disk_changed
block: move bdev_disk_changed
block: add the events* attributes to disk_attrs
block: move the disk events code to a separate file
block: fix trace completion for chained bio
block/partitions/msdos: Fix typo inidicator -> indicator
block, bfq: reset waker pointer with shared queues
block, bfq: check waker only for queues with no in-flight I/O
block, bfq: avoid delayed merge of async queues
block, bfq: boost throughput by extending queue-merging times
block, bfq: consider also creation time in delayed stable merge
block, bfq: fix delayed stable merge check
block, bfq: let also stably merged queues enjoy weight raising
blk-wbt: make sure throttle is enabled properly
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
...
|
|
Declare and initialize structure variables to zero values so that we can
remove zeroout memset calls in the host/core.c.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Declare and initialize structure variables to zero values so that we can
remove zeroout memset calls in the host/pci.c.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Declare and initialize structure variable to the zero values so that we
can get rid of the zeroout memset call.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Declare and initialize structure variable to the zero values so that we
can get rid of the zeroout memset call.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Declare and initialize structure variable to the zero values so that we
can get rid of the zeroout memset call.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Declare and initialize structure variable to the zero values so that we
can get rid of the zeroout memset call.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the helper to check NVMe controller's SGL support.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the helper to check NVMe controller's SGL support.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the helper to check NVMe controller's SGL support.
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For various transports such as fc/tcp/pci it is common to check if
NVMe SGLs are supported or not by the controller.
In this preparation patch we add a helper to avoid the open coding of
such checks in the various transport.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove the extra white line at the end of the functions.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvmeq->cq_head is compared with nvmeq->q_depth and changed the value
and cq_phase for handling the next cq db.
but, nvmeq->q_depth's type is u32 and max. value is 0x10000 when
CQP.MSQE is 0xffff and io_queue_depth is 0x10000.
current temp. variable for comparing with nvmeq->q_depth is overflowed
when previous nvmeq->cq_head is 0xffff.
in this case, nvmeq->cq_phase is not updated.
so, fix data type for temp. variable to u32.
Signed-off-by: JK Kim <jongkang.kim2@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
These error paths currently return success but they should return
-EOPNOTSUPP.
Fixes: 73ffcefcfca0 ("nvme-tcp: check sgl supported by target")
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a helper nvme_validate_passthru_nsid() to validate the nsid that
removes the nsid validation and error message print code from
nvme_user_cmd() and nvme_user_cmd64().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Fix a singular/plural mismatch in the CONFIG_NVME_MULTIPATH help text.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit ce86dad222e9 ("nvme-multipath: reset bdev to ns head when
failover") moved the reset code where the bio is added to the
requeue_list for the failover path. But it left the original
bio_set_dev in nvme_requeue_work.
There is a second path to nvme_requee_work. It is via
nvme_ns_head_submit_bio. Though we don't have to set bio->bi_bdev for
this path either, as it points to the correct bdev already.
Let's remove the bio_set_dev. It's updating the bio->bi_bdev with the
same pointer and thus it's unnecessary.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The controller is required to have a non-zero MNAN value if it supports
ANA:
If the controller supports Asymmetric Namespace Access Reporting, then
this field shall be set to a non-zero value that is less than or equal
to the NN value.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Although first implemented for NVME, this check may be usable by
other drivers as well. Microsoft's specification explicitly mentions
that is may be usable by SATA and AHCI devices. Google also indicates
that they have used this with SDHCI in a downstream kernel tree that
a user can plug a storage device into.
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Suggested-by: Keith Busch <kbusch@kernel.org>
CC: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Rafael J. Wysocki <rjw@rjwysocki.net>
CC: Prike Liang <prike.liang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a new sysfs attribute, appid_store, which can be used to set the
application identifier in the blkcg associated with a cgroup id.
Below is the interface provided to set the app_id:
echo "<cgroupid>:<appid>" >> /sys/class/fc/fc_udev_device/appid_store
echo "457E:100000109b521d27" >> /sys/class/fc/fc_udev_device/appid_store
Link: https://lore.kernel.org/r/20210608043556.274139-4-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that only one caller is left remove the helpers by restructuring
nvme_pr_command so that it has two helpers for sending a command of to a
given nsid using either the ns_head for multipath, or the namespace
stored in the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Split multipath support out of nvme_report_zones into a separate helper
and simplify the non-multipath version as a result.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Move the CSI check into nvme_ns_report_zones to clean up the code
a little bit and prepare for further refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Add the __releases annotation to tell sparse that nvme_ns_head_ctrl_ioctl
is expected to unlock head->srcu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
nvme_ns_head_ctrl_ioctl is always used on multipath nodes, so just call
srcu_read_unlock directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
nvme_ns_head_ioctl is always used on multipath nodes, no need to
deal with the de-multiplexers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
nvme_ns_head_chr_ioctl is always used on multipath nodes, so just call
srcu_read_unlock and consolidate the two unlock paths.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
