summaryrefslogtreecommitdiff
path: root/drivers/nvme/host/pci.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-16nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tagsSmith, Kyle Miller (Nimble Kernel)1-0/+1
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically -ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which is checked immediately after the call. However, when we return the error message up the stack, to nvme_reset_work the error takes us to nvme_remove_dead_ctrl() nvme_dev_disable() nvme_suspend_queue(&dev->queues[0]). Here, we only check that the admin_q is non-NULL, rather than not an error or NULL, and begin quiescing a queue that never existed, leading to bad / NULL pointer dereference. Signed-off-by: Kyle Smith <kyles@hpe.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-05-16nvme: mark internal passthru request RQF_QUIETChaitanya Kulkarni1-0/+2
Most of the internal passthru commands use __nvme_submit_sync_cmd() interface. There are few places we open code the request submission :- 1. nvme_keep_alive_work(struct work_struct *work) 2. nvme_timeout(struct request *req, bool reserved) 3. nvme_delete_queue(struct nvme_queue *nvmeq, u8 opcode) Mark the internal passthru request quiet so that we can skip the verbose error message from nvme_log_error() in nvme_end_req() completion path, this will be consistent with what we have in __nvme_submit_sync_cmd(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-04-15nvme-pci: disable namespace identifiers for Qemu controllersChristoph Hellwig1-1/+4
Qemu unconditionally reports a UUID, which depending on the qemu version is either all-null (which is incorrect but harmless) or contains a single bit set for all controllers. In addition it can also optionally report a eui64 which needs to be manually set. Disable namespace identifiers for Qemu controlles entirely even if in some cases they could be set correctly through manual intervention. Reported-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2022-04-15nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202Christoph Hellwig1-0/+4
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely. Reported-by: 金韬 <me@kingtous.cn> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: 金韬 <me@kingtous.cn>
2022-04-02Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+5
Pull block driver fixes from Jens Axboe: "Followup block driver updates and fixes for the 5.18-rc1 merge window. In detail: - NVMe pull request - Fix multipath hang when disk goes live over reconnect (Anton Eidelman) - fix RCU hole that allowed for endless looping in multipath round robin (Chris Leech) - remove redundant assignment after left shift (Colin Ian King) - add quirks for Samsung X5 SSDs (Monish Kumar R) - fix the read-only state for zoned namespaces with unsupposed features (Pankaj Raghav) - use a private workqueue instead of the system workqueue in nvmet (Sagi Grimberg) - allow duplicate NSIDs for private namespaces (Sungup Moon) - expose use_threaded_interrupts read-only in sysfs (Xin Hao)" - nbd minor allocation fix (Zhang) - drbd fixes and maintainer addition (Lars, Jakob, Christoph) - n64cart build fix (Jackie) - loop compat ioctl fix (Carlos) - misc fixes (Colin, Dongli)" * tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block: drbd: remove check of list iterator against head past the loop body drbd: remove usage of list iterator variable after loop nbd: fix possible overflow on 'first_minor' in nbd_dev_add() MAINTAINERS: add drbd co-maintainer drbd: fix potential silent data corruption loop: fix ioctl calls using compat_loop_info nvme-multipath: fix hang when disk goes live over reconnect nvme: fix RCU hole that allowed for endless looping in multipath round robin nvme: allow duplicate NSIDs for private namespaces nvmet: remove redundant assignment after left shift nvmet: use a private workqueue instead of the system workqueue nvme-pci: add quirks for Samsung X5 SSDs nvme-pci: expose use_threaded_interrupts read-only in sysfs nvme: fix the read-only state for zoned namespaces with unsupposed features n64cart: convert bi_disk to bi_bdev->bd_disk fix build xen/blkfront: fix comment for need_copy xen-blkback: remove redundant assignment to variable i
2022-03-23nvme-pci: add quirks for Samsung X5 SSDsMonish Kumar R1-1/+4
Add quirks to not fail the initialization and to have quick resume latency after cold/warm reboot. Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-03-23nvme-pci: expose use_threaded_interrupts read-only in sysfsXin Hao1-1/+1
Allow reading /sys/module/nvme/parameters/use_threaded_interrupts to see if the use_threaded_interrupts module parameter is in use. Signed-off-by: Xin Hao <xhao@linux.alibaba.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-03-23Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-0/+1
Pull folio updates from Matthew Wilcox: - Rewrite how munlock works to massively reduce the contention on i_mmap_rwsem (Hugh Dickins): https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/ - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig): https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/ - Convert GUP to use folios and make pincount available for order-1 pages. (Matthew Wilcox) - Convert a few more truncation functions to use folios (Matthew Wilcox) - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox) - Convert rmap_walk to use folios (Matthew Wilcox) - Convert most of shrink_page_list() to use a folio (Matthew Wilcox) - Add support for creating large folios in readahead (Matthew Wilcox) * tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits) mm/damon: minor cleanup for damon_pa_young selftests/vm/transhuge-stress: Support file-backed PMD folios mm/filemap: Support VM_HUGEPAGE for file mappings mm/readahead: Switch to page_cache_ra_order mm/readahead: Align file mappings for non-DAX mm/readahead: Add large folio readahead mm: Support arbitrary THP sizes mm: Make large folios depend on THP mm: Fix READ_ONLY_THP warning mm/filemap: Allow large folios to be added to the page cache mm: Turn can_split_huge_page() into can_split_folio() mm/vmscan: Convert pageout() to take a folio mm/vmscan: Turn page_check_references() into folio_check_references() mm/vmscan: Account large folios correctly mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios mm/vmscan: Free non-shmem folios without splitting them mm/rmap: Constify the rmap_walk_control argument mm/rmap: Convert rmap_walk() to take a folio mm: Turn page_anon_vma() into folio_anon_vma() mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read() ...
2022-03-16nvme: remove nvme_alloc_request and nvme_alloc_request_qidChristoph Hellwig1-7/+10
Just open code the allocation + initialization in the callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-03-03mm: don't include <linux/memremap.h> in <linux/mm.h>Christoph Hellwig1-0/+1
Move the check for the actual pgmap types that need the free at refcount one behavior into the out of line helper, and thus avoid the need to pull memremap.h into mm.h. Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-01-27nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDsWu Zheng1-1/+2
The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming compliance to a standards version where reporting one is required. Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a second such SSDs in a system. Signed-off-by: Zheng Wu <wu.zheng@intel.com> Signed-off-by: Ye Jinhe <jinhe.ye@intel.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-01-05nvme-pci: fix queue_rqs list splittingKeith Busch1-14/+14
If command prep fails, current handling will orphan subsequent requests in the list. Consider a simple example: rqlist = [ 1 -> 2 ] When prep for request '1' fails, it will be appended to the 'requeue_list', leaving request '2' disconnected from the original rqlist and no longer tracked. Meanwhile, rqlist is still pointing to the failed request '1' and will attempt to submit the unprepped command. Fix this by updating the rqlist accordingly using the request list helper functions. Fixes: d62cbcf62f2f ("nvme: add support for mq_ops->queue_rqs()") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220105170518.3181469-5-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16nvme: add support for mq_ops->queue_rqs()Jens Axboe1-0/+59
This enables the block layer to send us a full plug list of requests that need submitting. The block layer guarantees that they all belong to the same queue, but we do have to check the hardware queue mapping for each request. If errors are encountered, leave them in the passed in list. Then the block layer will handle them individually. This is good for about a 4% improvement in peak performance, taking us from 9.6M to 10M IOPS/core. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16nvme: separate command prep and issueJens Axboe1-27/+36
Add a nvme_prep_rq() helper to setup a command, and nvme_queue_rq() is adapted to use this helper. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-16nvme: split command copy into a helperJens Axboe1-14/+12
We'll need it for batched submit as well. Since we now have a copy helper, get rid of the nvme_submit_cmd() wrapper. Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29block: remove the gendisk argument to blk_execute_rqChristoph Hellwig1-4/+3
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait given that it is unused now. Also convert the boolean at_head parameter to actually use the bool type while touching the prototype. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-01Merge tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+8
Pull block driver updates from Jens Axboe: - paride driver cleanups (Christoph) - Remove cryptoloop support (Christoph) - null_blk poll support (me) - Now that add_disk() supports proper error handling, add it to various drivers (Luis) - Make ataflop actually work again (Michael) - s390 dasd fixes (Stefan, Heiko) - nbd fixes (Yu, Ye) - Remove redundant wq flush in mtip32xx (Christophe) - NVMe updates - fix a multipath partition scanning deadlock (Hannes Reinecke) - generate uevent once a multipath namespace is operational again (Hannes Reinecke) - support unique discovery controller NQNs (Hannes Reinecke) - fix use-after-free when a port is removed (Israel Rukshin) - clear shadow doorbell memory on resets (Keith Busch) - use struct_size (Len Baker) - add error handling support for add_disk (Luis Chamberlain) - limit the maximal queue size for RDMA controllers (Max Gurtovoy) - use a few more symbolic names (Max Gurtovoy) - fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy) - add support for ->map_queues on FC (Saurav Kashyap) - support the current discovery subsystem entry (Hannes Reinecke) - use flex_array_size and struct_size (Len Baker) - bcache fixes (Christoph, Coly, Chao, Lin, Qing) - MD updates (Christoph, Guoqing, Xiao) - Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye) * tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits) null_blk: Fix handling of submit_queues and poll_queues attributes block: ataflop: Fix warning comparing pointer to 0 bcache: replace snprintf in show functions with sysfs_emit bcache: move uapi header bcache.h to bcache code directory nvmet: use flex_array_size and struct_size nvmet: register discovery subsystem as 'current' nvmet: switch check for subsystem type nvme: add new discovery log page entry definitions block: ataflop: more blk-mq refactoring fixes block: remove support for cryptoloop and the xor transfer mtd: add add_disk() error handling rnbd: add error handling support for add_disk() um/drivers/ubd_kern: add error handling support for add_disk() m68k/emu/nfblock: add error handling support for add_disk() xen-blkfront: add error handling support for add_disk() bcache: add error handling support for add_disk() dm: add add_disk() error handling block: aoe: fixup coccinelle warnings nvmet: use struct_size over open coded arithmetic nvme: drop scan_lock and always kick requeue list when removing namespaces ...
2021-10-20nvme-pci: clear shadow doorbell memory on resetsKeith Busch1-1/+8
The host memory doorbell and event buffers need to be initialized on each reset so the driver doesn't observe stale values from the previous instantiation. Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: John Levon <john.levon@nutanix.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-20nvme: apply nvme API to quiesce/unquiesce admin queueMing Lei1-4/+4
Apply the added two APIs to quiesce/unquiesce admin queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014081710.1871747-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18nvme: wire up completion batching for the IRQ pathJens Axboe1-1/+5
Trivial to do now, just need our own io_comp_batch on the stack and pass that in to the usual command completion handling. I pondered making this dependent on how many entries we had to process, but even for a single entry there's no discernable difference in performance or latency. Running a sync workload over io_uring: t/io_uring -b512 -d1 -s1 -c1 -p0 -F1 -B1 -n2 /dev/nvme1n1 /dev/nvme2n1 yields the below performance before the patch: IOPS=254820, BW=124MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=251174, BW=122MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=250806, BW=122MiB/s, IOS/call=1/1, inflight=(1 1) and the following after: IOPS=255972, BW=124MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=251920, BW=123MiB/s, IOS/call=1/1, inflight=(1 1) IOPS=251794, BW=122MiB/s, IOS/call=1/1, inflight=(1 1) which definitely isn't slower, about the same if you factor in a bit of variance. For peak performance workloads, benchmarking shows a 2% improvement. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18nvme: add support for batched completion of polled IOJens Axboe1-9/+23
Take advantage of struct io_comp_batch, if passed in to the nvme poll handler. If it's set, rather than complete each request individually inline, store them in the io_comp_batch list. We only do so for requests that will complete successfully, anything else will be completed inline as before. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: add a struct io_comp_batch argument to fops->iopoll()Jens Axboe1-2/+2
struct io_comp_batch contains a list head and a completion handler, which will allow completions to more effciently completed batches of IO. For now, no functional changes in this patch, we just define the io_comp_batch structure and add the argument to the file_operations iopoll handler. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move integrity handling out of <linux/blkdev.h>Christoph Hellwig1-0/+1
Split the integrity/metadata handling definitions out into a new header. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-14Merge tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme into block-5.15Jens Axboe1-1/+1
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares)" * tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme: nvme: fix per-namespace chardev deletion nvme-pci: Fix abort command id
2021-10-07nvme-pci: Fix abort command idKeith Busch1-1/+1
The request tag is no longer the only component of the command id. Fixes: e7006de6c2380 ("nvme: code command_id with a genctr for use-after-free validation") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2021-09-27nvme: add command id quirk for apple controllersKeith Busch1-1/+2
Some apple controllers use the command id as an index to implementation specific data structures and will fail if the value is out of bounds. The nvme driver's recently introduced command sequence number breaks this controller. Provide a quirk so these spec incompliant controllers can function as before. The driver will not have the ability to detect bad completions when this quirk is used, but we weren't previously checking this anyway. The quirk bit was selected so that it can readily apply to stable. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509 Cc: Sven Peter <sven@svenpeter.dev> Reported-by: Orlando Chamberlain <redecorating@protonmail.com> Reported-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-16nvme: allow user toggling hmb usageKeith Busch1-1/+44
The NVMe host memory buffer may consume a non-negligable amount of memory. Controllers are required to function without the host memory buffer enabled, but with possibly degraded performance. Export a sysfs property to toggle this feature on a per-device granularity so users may choose to reclaim memory at the expense of storage performance. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-16nvme-pci: disable hmb on idle suspendKeith Busch1-7/+17
An idle suspend may or may not disable host memory access from devices placed in low power mode. Either way, it should always be safe to disable the host memory buffer prior to entering the low power mode, and this should also always be faster than a full device shutdown. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-16nvme-pci: cmb sysfs: one file, one valueKeith Busch1-2/+26
An attribute should only be exporting one value as recommended in Documentation/filesystems/sysfs.rst. Implement CMB attributes this way. The old attribute will remain for backward compatibility. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-16nvme-pci: use attribute group for cmb sysfsKeith Busch1-26/+46
Appending sysfs files to the controller kobject is a bit clunky and becomes a maintenance problem as more attributes are added. The attribute group infrastructure handles this better, so use that. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-16nvme: code command_id with a genctr for use-after-free validationSagi Grimberg1-1/+1
We cannot detect a (perhaps buggy) controller that is sending us a completion for a request that was already completed (for example sending a completion twice), this phenomenon was seen in the wild a few times. So to protect against this, we use the upper 4 msbits of the nvme sqe command_id to use as a 4-bit generation counter and verify it matches the existing request generation that is incrementing on every execution. The 16-bit command_id structure now is constructed by: | xxxx | xxxxxxxxxxxx | gen request tag This means that we are giving up some possible queue depth as 12 bits allow for a maximum queue depth of 4095 instead of 65536, however we never create such long queues anyways so no real harm done. Suggested-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-16nvme-pci: limit maximum queue depth to 4095Sagi Grimberg1-9/+5
We are going to use the upper 4-bits of the command_id for a generation counter, so enforce the new queue depth upper limit. As we enforce both min and max queue depth, use param_set_uint_minmax istead of open coding it. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-08-15remove the lightnvm subsystemChristoph Hellwig1-6/+0
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts to produce Open Channel SSDs and never made it into the NVMe spec proper. They have since been superceeded by NVMe enhancements such as ZNS support. Remove the support per the deprecation schedule. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de Reviewed-by: Matias Bjørling <mb@lightnvm.io> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-21nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTINGZhihao Cheng1-1/+3
Followling process: nvme_probe nvme_reset_ctrl nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) queue_work(nvme_reset_wq, &ctrl->reset_work) --------------> nvme_remove nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING) worker_thread process_one_work nvme_reset_work WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING) , which will trigger WARN_ON in nvme_reset_work(): [ 127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594 [ 127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0 [ 127.552518] Call Trace: [ 127.552840] ? kvm_sched_clock_read+0x25/0x40 [ 127.553936] ? native_send_call_func_single_ipi+0x1c/0x30 [ 127.555117] ? send_call_function_single_ipi+0x9b/0x130 [ 127.556263] ? __smp_call_single_queue+0x48/0x60 [ 127.557278] ? ttwu_queue_wakelist+0xfa/0x1c0 [ 127.558231] ? try_to_wake_up+0x265/0x9d0 [ 127.559120] ? ext4_end_io_rsv_work+0x160/0x290 [ 127.560118] process_one_work+0x28c/0x640 [ 127.561002] worker_thread+0x39a/0x700 [ 127.561833] ? rescuer_thread+0x580/0x580 [ 127.562714] kthread+0x18c/0x1e0 [ 127.563444] ? set_kthread_struct+0x70/0x70 [ 127.564347] ret_from_fork+0x1f/0x30 The preceding problem can be easily reproduced by executing following script (based on blktests suite): test() { pdev="$(_get_pci_dev_from_blkdev)" sysfs="/sys/bus/pci/devices/${pdev}" for ((i = 0; i < 10; i++)); do echo 1 > "$sysfs/remove" echo 1 > /sys/bus/pci/rescan done } Since the device ctrl could be updated as an non-RESETTING state by repeating probe/remove in userspace (which is a normal situation), we can replace stack dumping WARN_ON with a warnning message. Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
2021-07-13nvme-pci: do not call nvme_dev_remove_admin from nvme_removeCasey Chen1-1/+0
nvme_dev_remove_admin could free dev->admin_q and the admin_tagset while they are being accessed by nvme_dev_disable(), which can be called by nvme_reset_work via nvme_remove_dead_ctrl. Commit cb4bfda62afa ("nvme-pci: fix hot removal during error handling") intended to avoid requests being stuck on a removed controller by killing the admin queue. But the later fix c8e9e9b7646e ("nvme-pci: unquiesce admin queue on shutdown"), together with nvme_dev_disable(dev, true) right before nvme_dev_remove_admin() could help dispatch requests and fail them early, so we don't need nvme_dev_remove_admin() any more. Fixes: cb4bfda62afa ("nvme-pci: fix hot removal during error handling") Signed-off-by: Casey Chen <cachen@purestorage.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-13nvme-pci: fix multiple races in nvme_setup_io_queuesCasey Chen1-8/+58
Below two paths could overlap each other if we power off a drive quickly after powering it on. There are multiple races in nvme_setup_io_queues() because of shutdown_lock missing and improper use of NVMEQ_ENABLED bit. nvme_reset_work() nvme_remove() nvme_setup_io_queues() nvme_dev_disable() ... ... A1 clear NVMEQ_ENABLED bit for admin queue lock retry: B1 nvme_suspend_io_queues() A2 pci_free_irq() admin queue B2 nvme_suspend_queue() admin queue A3 pci_free_irq_vectors() nvme_pci_disable() A4 nvme_setup_irqs(); B3 pci_free_irq_vectors() ... unlock A5 queue_request_irq() for admin queue set NVMEQ_ENABLED bit ... nvme_create_io_queues() A6 result = queue_request_irq(); set NVMEQ_ENABLED bit ... fail to allocate enough IO queues: A7 nvme_suspend_io_queues() goto retry If B3 runs in between A1 and A2, it will crash if irqaction haven't been freed by A2. B2 is supposed to free admin queue IRQ but it simply can't fulfill the job as A1 has cleared NVMEQ_ENABLED bit. Fix: combine A1 A2 so IRQ get freed as soon as the NVMEQ_ENABLED bit gets cleared. After solved #1, A2 could race with B3 if A2 is freeing IRQ while B3 is checking irqaction. A3 also could race with B2 if B2 is freeing IRQ while A3 is checking irqaction. Fix: A2 and A3 take lock for mutual exclusion. A3 could race with B3 since they could run free_msi_irqs() in parallel. Fix: A3 takes lock for mutual exclusion. A4 could fail to allocate all needed IRQ vectors if A3 and A4 are interrupted by B3. Fix: A4 takes lock for mutual exclusion. If A5/A6 happened after B2/B1, B3 will crash since irqaction is not NULL. They are just allocated by A5/A6. Fix: Lock queue_request_irq() and setting of NVMEQ_ENABLED bit. A7 could get chance to pci_free_irq() for certain IO queue while B3 is checking irqaction. Fix: A7 takes lock. nvme_dev->online_queues need to be protected by shutdown_lock. Since it is not atomic, both paths could modify it using its own copy. Co-developed-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Casey Chen <cachen@purestorage.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-17nvme-pci: remove zeroout memset call for structChaitanya Kulkarni1-16/+8
Declare and initialize structure variables to zero values so that we can remove zeroout memset calls in the host/pci.c. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-17nvme-pci: use ctrl sgl check helperChaitanya Kulkarni1-2/+2
Use the helper to check NVMe controller's SGL support. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-17nvme-pci: remove trailing lines for helpersChaitanya Kulkarni1-2/+0
Remove the extra white line at the end of the functions. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-17nvme-pci: fix var. type for increasing cq_headJK Kim1-1/+1
nvmeq->cq_head is compared with nvmeq->q_depth and changed the value and cq_phase for handling the next cq db. but, nvmeq->q_depth's type is u32 and max. value is 0x10000 when CQP.MSQE is 0xffff and io_queue_depth is 0x10000. current temp. variable for comparing with nvmeq->q_depth is overflowed when previous nvmeq->cq_head is 0xffff. in this case, nvmeq->cq_phase is not updated. so, fix data type for temp. variable to u32. Signed-off-by: JK Kim <jongkang.kim2@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-16ACPI: Check StorageD3Enable _DSD property in ACPI codeMario Limonciello1-27/+1
Although first implemented for NVME, this check may be usable by other drivers as well. Microsoft's specification explicitly mentions that is may be usable by SATA and AHCI devices. Google also indicates that they have used this with SDHCI in a downstream kernel tree that a user can plug a storage device into. Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Suggested-by: Keith Busch <kbusch@kernel.org> CC: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com> CC: Alexander Deucher <Alexander.Deucher@amd.com> CC: Rafael J. Wysocki <rjw@rjwysocki.net> CC: Prike Liang <prike.liang@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03nvme-pci: look for StorageD3Enable on companion ACPI device insteadMario Limonciello1-23/+1
The documentation around the StorageD3Enable property hints that it should be made on the PCI device. This is where newer AMD systems set the property and it's required for S0i3 support. So rather than look for nodes of the root port only present on Intel systems, switch to the companion ACPI device for all systems. David Box from Intel indicated this should work on Intel as well. Link: https://lore.kernel.org/linux-nvme/YK6gmAWqaRmvpJXb@google.com/T/#m900552229fa455867ee29c33b854845fce80ba70 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Fixes: df4f9bc4fb9c ("nvme-pci: add support for ACPI StorageD3Enable property") Suggested-by: Liang Prike <Prike.Liang@amd.com> Acked-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-04nvme-pci: fix controller reset hang when racing with nvme_timeoutTao Chiu1-0/+3
reset_work() in nvme-pci may hang forever in the following scenario: 1) A reset caused by a command timeout occurs due to a controller being temporarily irresponsive. 2) nvme_reset_work() restarts admin queue at nvme_alloc_admin_tags(). At the same time, a user-submitted admin command is queued and waiting for completion. Then, reset_work() changes its state to CONNECTING, and submits an identify command. 3) However, the controller does still not respond to any command, causing a timeout being fired at the user-submitted command. Unfortunately, nvme_timeout() does not see the completion on cq, and any timeout that takes place under CONNECTING state causes a controller shutdown. 4) Normally, the identify command in reset_work() would be canceled with SC_HOST_ABORTED by nvme_dev_disable(), then reset_work can tear down the controller accordingly. But the controller happens to return online and respond the identify command before nvme_dev_disable() should have been reaped it off. 5) reset_work() continues to setup_io_queues() as it observes no error in init_identify(). However, the admin queue has already been quiesced in dev_disable(). Thus, any following commands would be blocked forever in blk_execute_rq(). This can be fixed by restricting usercmd commands when controller is not in a LIVE state in nvme_queue_rq(), as what has been done previously in fabrics. ``` nvme_reset_work(): | nvme_alloc_admin_tags() | | nvme_submit_user_cmd(): nvme_init_identify(): | ... __nvme_submit_sync_cmd(): | ... | ... ---------------------------------------> nvme_timeout(): (Controller starts reponding commands) | nvme_dev_disable(, true): nvme_setup_io_queues(): | __nvme_submit_sync_cmd(): | (hung in blk_execute_rq | since run_hw_queue sees | queue quiesced) | ``` Signed-off-by: Tao Chiu <taochiu@synology.com> Signed-off-by: Cody Wong <codywong@synology.com> Reviewed-by: Leon Chien <leonchien@synology.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-15nvme-pci: remove single trailing whitespaceNiklas Cassel1-1/+1
There is a single trailing whitespace in pci.c. Since this is just a single whitespace, the chances of this affecting backports to stable should be quite low, so let's just remove it. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-15nvme-pci: don't simple map sgl when sgls are disabledNiklas Cassel1-1/+1
According to the module parameter description for sgl_threshold, a value of 0 means that SGLs are disabled. If SGLs are disabled, we should respect that, even for the case where the request is made up of a single physical segment. Fixes: 297910571f08 ("nvme-pci: optimize mapping single segment requests using SGLs") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-02nvme: use driver pdu command for passthroughKeith Busch1-1/+2
All nvme transport drivers preallocate an nvme command for each request. Assume to use that command for nvme_setup_cmd() instead of requiring drivers pass a pointer to it. All nvme drivers must initialize the generic nvme_request 'cmd' to point to the transport's preallocated nvme_command. The generic nvme_request cmd pointer had previously been used only as a temporary copy for passthrough commands. Since it now points to the command that gets dispatched, passthrough commands must directly set it up prior to executing the request. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-02nvme-pci: allocate nvme_command within driver pduKeith Busch1-5/+6
Except for pci, all the nvme transport drivers allocate a command within the driver's pdu. Align pci with everyone else by allocating the nvme command within pci's pdu and replace the .queue_rq() stack variable with this. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-02nvme: rename nvme_init_identify()Chaitanya Kulkarni1-1/+1
This is a prep patch so that we can move the identify data structure related code initialization from nvme_init_identify() into a helper. Rename the function nvmet_init_identify() to nvmet_init_ctrl_finish(). Next patch will move the nvme_id_ctrl related initialization from newly renamed function nvme_init_ctrl_finish() into the nvme_init_identify() helper. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-02nvme-pci: cleanup nvme_irq()Chaitanya Kulkarni1-4/+2
Get rid of a local variable that is not needed and just return the status directly. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-04-02nvme-pci: remove the barriers in nvme_irq()Chaitanya Kulkarni1-6/+0
The barriers were added to the nvme_irq() in commit 3a7afd8ee42a ("nvme-pci: remove the CQ lock for interrupt driven queues") to prevent compiler from doing memory optimization for the variabes that were protected previously by spinlock in nvme_irq() at completion queue processing and with queue head check condition. The variable nvmeq->last_cq_head from those checks was removed in the commit f6c4d97b0d82 ("nvme/pci: Remove last_cq_head") that was not allwing poll queues from mistakenly triggering the spurious interrupt detection. Remove the barriers which were protecting the updates to the variables. Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 23:17:10 +0300