summaryrefslogtreecommitdiff
path: root/drivers/nvdimm
AgeCommit message (Collapse)AuthorFilesLines
2017-03-01nfit, libnvdimm: fix interleave set cookie calculationDan Williams3-4/+24
The interleave-set cookie is a sum that sanity checks the composition of an interleave set has not changed from when the namespace was initially created. The checksum is calculated by sorting the DIMMs by their location in the interleave-set. The comparison for the sort must be 64-bit wide, not byte-by-byte as performed by memcmp() in the broken case. Fix the implementation to accept correct cookie values in addition to the Linux "memcmp" order cookies, but only allow correct cookies to be generated going forward. It does mean that namespaces created by third-party-tooling, or created by newer kernels with this fix, will not validate on older kernels. However, there are a couple mitigating conditions: 1/ platforms with namespace-label capable NVDIMMs are not widely available. 2/ interleave-sets with a single-dimm are by definition not affected (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case. The cookie stored in the namespace label will be fixed by any write the namespace label, the most straightforward way to achieve this is to write to the "alt_name" attribute of a namespace in sysfs. Cc: <stable@vger.kernel.org> Fixes: eaf961536e16 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure") Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-02-05libnvdimm, pfn: fix memmap reservation size versus 4K alignmentDan Williams1-5/+2
When vmemmap_populate() allocates space for the memmap it does so in 2MB sized chunks. The libnvdimm-pfn driver incorrectly accounts for this when the alignment of the device is set to 4K. When this happens we trigger memory allocation failures in altmap_alloc_block_buf() and trigger warnings of the form: WARNING: CPU: 0 PID: 3376 at arch/x86/mm/init_64.c:656 arch_add_memory+0xe4/0xf0 [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 arch_add_memory+0xe4/0xf0 devm_memremap_pages+0x29b/0x4e0 Fixes: 315c562536c4 ("libnvdimm, pfn: add 'align' attribute, default to HPAGE_SIZE") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-02-01libnvdimm, namespace: do not delete namespace-id 0Dan Williams1-4/+7
Given that the naming of pmem devices changes from the pmemX form to the pmemX.Y form when namespace id is greater than 0, arrange for namespaces with id-0 to be exempt from deletion. Otherwise a simple reconfiguration of an existing namespace to a new mode results in a name change of the resulting block device: # ndctl list --namespace=namespace1.0 { "dev":"namespace1.0", "mode":"raw", "size":2147483648, "uuid":"3dadf3dc-89b9-4b24-b20e-abc8a4707ce3", "blockdev":"pmem1" } # ndctl create-namespace --reconfig=namespace1.0 --mode=memory --force { "dev":"namespace1.1", "mode":"memory", "size":2111832064, "uuid":"7b4a6341-7318-4219-a02c-fb57c0bbf613", "blockdev":"pmem1.1" } This change does require tooling changes to explicitly look for namespaceX.0 if the seed has already advanced to another namespace. Cc: <stable@vger.kernel.org> Fixes: 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem-namespaces per region") Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-02-01nvdimm: constify device_type structuresBhumika Goyal1-3/+3
Declare device_type structure as const as it is only stored in the type field of a device structure. This field is of type const, so add const to declaration of device_type structure. File size before: text data bss dec hex filename 19278 3199 16 22493 57dd nvdimm/namespace_devs.o File size after: text data bss dec hex filename 19929 3160 16 23105 5a41 nvdimm/namespace_devs.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-01-13libnvdimm, namespace: fix pmem namespace leak, delete when size set to zeroDan Williams1-13/+10
Commit 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem-namespaces per region") added support for establishing additional pmem namespace beyond the seed device, similar to blk namespaces. However, it neglected to delete the namespace when the size is set to zero. Fixes: 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem-namespaces per region") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-01-13pmem: return EIO on read_pmem() failureStefan Hajnoczi1-1/+3
The read_pmem() function uses memcpy_mcsafe() on x86 where an EFAULT error code indicates a failed read. Block I/O should use EIO to indicate failure. Other pmem code paths (like bad blocks) already use EIO so let's be consistent. This fixes compatibility with consumers like btrfs that try to parse the specific error code rather than treat all errors the same. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-19Merge tag 'libnvdimm-for-4.10' of ↵Linus Torvalds11-72/+71
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The libnvdimm pull request is relatively small this time around due to some development topics being deferred to 4.11. As for this pull request the bulk of it has been in -next for several releases leading to one late fix being added (commit 868f036fee4b ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It has received a build success notification from the 0day-kbuild robot and passes the latest libnvdimm unit tests. Summary: - Dynamic label support: To date namespace label support has been limited to disambiguating cases where PMEM (direct load/store) and BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since 4.9 added support for multiple namespaces per PMEM-region there is value to support namespace labels even in the non-aliasing case. The presence of a valid namespace index block force-enables label support when the kernel would otherwise rely on region boundaries, and permits the region to be sub-divided. - Handle media errors in namespace metadata: Complement the error handling for media errors in namespace data areas with support for clearing errors on writes, and downgrading potential machine-check exceptions to simple i/o errors on read. - Device-DAX region attributes: Add 'align', 'id', and 'size' as attributes for device-dax regions. In particular this enables userspace tooling to generically size memory mapping and i/o operations. Prevent userspace from growing assumptions / dependencies about the parent device topology for a dax region. A libnvdimm namespace may not always be the parent device of a dax region. - Various cleanups and small fixes" * tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: add region 'id', 'size', and 'align' attributes libnvdimm: fix mishandled nvdimm_clear_poison() return value libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held libnvdimm, pfn: fix align attribute libnvdimm, e820: use module_platform_driver libnvdimm, namespace: use octal for permissions libnvdimm, namespace: avoid multiple sector calculations libnvdimm: remove else after return in nsio_rw_bytes() libnvdimm, namespace: fix the type of name variable libnvdimm: use consistent naming for request_mem_region() nvdimm: use the right length of "pmem" libnvdimm: check and clear poison before writing to pmem tools/testing/nvdimm: dynamic label support libnvdimm: allow a platform to force enable label support libnvdimm: use generic iostat interfaces
2016-12-18Merge branch 'for-4.10/libnvdimm' into libnvdimm-for-nextDan Williams11-72/+71
2016-12-16libnvdimm: fix mishandled nvdimm_clear_poison() return valueDan Williams2-11/+19
Colin, via static analysis, reports that the length could be negative from nvdimm_clear_poison() in the error case. There was a similar problem with commit 0a3f27b9a6a8 "libnvdimm, namespace: avoid multiple sector calculations" that I noticed when merging the for-4.10/libnvdimm topic branch into libnvdimm-for-next, but I missed this one. Fix both of them to the following procedure: * if we clear a block's worth of media, clear that many blocks in badblocks * if we clear less than the requested size of the transfer return an error * always invalidate cache after any non-error / non-zero nvdimm_clear_poison result Fixes: 82bf1037f2ca ("libnvdimm: check and clear poison before writing to pmem") Fixes: 0a3f27b9a6a8 ("libnvdimm, namespace: avoid multiple sector calculations") Cc: Fabian Frederick <fabf@skynet.be> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-16libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_heldDan Williams3-8/+6
For warnings that should only ever trigger during development and testing replace WARN statements with lockdep_assert_held. The lockdep pattern is prevalent, and these paths are are well covered by libnvdimm unit tests. Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-13Merge tag 'docs-4.10' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation update from Jonathan Corbet: "These are the documentation changes for 4.10. It's another busy cycle for the docs tree, as the sphinx conversion continues. Highlights include: - Further work on PDF output, which remains a bit of a pain but should be more solid now. - Five more DocBook template files converted to Sphinx. Only 27 to go... Lots of plain-text files have also been converted and integrated. - Images in binary formats have been replaced with more source-friendly versions. - Various bits of organizational work, including the renaming of various files discussed at the kernel summit. - New documentation for the device_link mechanism. ... and, of course, lots of typo fixes and small updates" * tag 'docs-4.10' of git://git.lwn.net/linux: (193 commits) dma-buf: Extract dma-buf.rst Update Documentation/00-INDEX docs: 00-INDEX: document directories/files with no docs docs: 00-INDEX: remove non-existing entries docs: 00-INDEX: add missing entries for documentation files/dirs docs: 00-INDEX: consolidate process/ and admin-guide/ description scripts: add a script to check if Documentation/00-INDEX is sane Docs: change sh -> awk in REPORTING-BUGS Documentation/core-api/device_link: Add initial documentation core-api: remove an unexpected unident ppc/idle: Add documentation for powersave=off Doc: Correct typo, "Introdution" => "Introduction" Documentation/atomic_ops.txt: convert to ReST markup Documentation/local_ops.txt: convert to ReST markup Documentation/assoc_array.txt: convert to ReST markup docs-rst: parse-headers.pl: cleanup the documentation docs-rst: fix media cleandocs target docs-rst: media/Makefile: reorganize the rules docs-rst: media: build SVG from graphviz files docs-rst: replace bayer.png by a SVG image ...
2016-12-10libnvdimm, pfn: fix align attributeDan Williams1-1/+1
Fix the format specifier so that the attribute can be parsed correctly. Currently it returns decimal 1000 for a 4096-byte alignment. Cc: <stable@vger.kernel.org> Reported-by: Dave Jiang <dave.jiang@intel.com> Fixes: 315c562536c4 ("libnvdimm, pfn: add 'align' attribute, default to HPAGE_SIZE") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-07acpi, nfit, libnvdimm: fix / harden ars_status output length handlingDan Williams1-5/+20
Given ambiguities in the ACPI 6.1 definition of the "Output (Size)" field of the ARS (Address Range Scrub) Status command, a firmware implementation may in practice return 0, 4, or 8 to indicate that there is no output payload to process. The specification states "Size of Output Buffer in bytes, including this field.". However, 'Output Buffer' is also the name of the entire payload, and earlier in the specification it states "Max Query ARS Status Output Buffer Size: Maximum size of buffer (including the Status and Extended Status fields)". Without this fix if the BIOS happens to return 0 it causes memory corruption as evidenced by this result from the acpi_nfit_ctl() unit test. ars_status00000000: 00020000 00000000 ........ BUG: stack guard page was hit at ffffc90001750000 (stack is ffffc9000174c000..ffffc9000174ffff) kernel stack overflow (page fault): 0000 [#1] SMP DEBUG_PAGEALLOC task: ffff8803332d2ec0 task.stack: ffffc9000174c000 RIP: 0010:[<ffffffff814cfe72>] [<ffffffff814cfe72>] __memcpy+0x12/0x20 RSP: 0018:ffffc9000174f9a8 EFLAGS: 00010246 RAX: ffffc9000174fab8 RBX: 0000000000000000 RCX: 000000001fffff56 RDX: 0000000000000000 RSI: ffff8803231f5a08 RDI: ffffc90001750000 RBP: ffffc9000174fa88 R08: ffffc9000174fab0 R09: ffff8803231f54b8 R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000003 R15: ffff8803231f54a0 FS: 00007f3a611af640(0000) GS:ffff88033ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90001750000 CR3: 0000000325b20000 CR4: 00000000000406e0 Stack: ffffffffa00bc60d 0000000000000008 ffffc90000000001 ffffc9000174faac 0000000000000292 ffffffffa00c24e4 ffffffffa00c2914 0000000000000000 0000000000000000 ffffffff00000003 ffff880331ae8ad0 0000000800000246 Call Trace: [<ffffffffa00bc60d>] ? acpi_nfit_ctl+0x49d/0x750 [nfit] [<ffffffffa01f4fe0>] nfit_test_probe+0x670/0xb1b [nfit_test] Cc: <stable@vger.kernel.org> Fixes: 747ffe11b440 ("libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-05libnvdimm, e820: use module_platform_driverJohannes Thumshirn1-11/+1
Use module_platform_driver for the e820 driver instead of open-coding it. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-04libnvdimm, namespace: use octal for permissionsFabian Frederick1-2/+2
According to commit f90774e1fd27 ("checkpatch: look for symbolic permissions and suggest octal instead") Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-04libnvdimm, namespace: avoid multiple sector calculationsFabian Frederick1-6/+5
Use sector_t for cleared Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-04libnvdimm: remove else after return in nsio_rw_bytes()Fabian Frederick1-19/+16
else after return is not needed. Signed-off-by: Fabian Frederick <fabf@skynet.be> [djbw: removed some now unnecessary newlines] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-11-29libnvdimm, namespace: fix the type of name variableNicolas Iooss1-1/+1
In create_namespace_blk(), the local variable "name" is defined as an array of NSLABEL_NAME_LEN pointers: char *name[NSLABEL_NAME_LEN]; This variable is then used in calls to memcpy() and kmemdup() as if it were char[NSLABEL_NAME_LEN]. Remove the star in the variable definition to makes it look right. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-11-28libnvdimm: use consistent naming for request_mem_region()Dan Williams2-2/+2
Here is an example /proc/iomem listing for a system with 2 namespaces, one in "sector" mode and one in "memory" mode: 1fc000000-2fbffffff : Persistent Memory (legacy) 1fc000000-2fbffffff : namespace1.0 340000000-34fffffff : Persistent Memory 340000000-34fffffff : btt0.1 Here is the corresponding ndctl listing: # ndctl list [ { "dev":"namespace1.0", "mode":"memory", "size":4294967296, "blockdev":"pmem1" }, { "dev":"namespace0.0", "mode":"sector", "size":267091968, "uuid":"f7594f86-badb-4592-875f-ded577da2eaf", "sector_size":4096, "blockdev":"pmem0s" } ] Notice that the ndctl listing is purely in terms of namespace devices, while the iomem listing leaks the internal "btt0.1" implementation detail. Given that ndctl requires the namespace device name to change the mode, for example: # ndctl create-namespace --reconfig=namespace0.0 --mode=raw --force ...use the namespace name in the iomem listing to keep the claiming device name consistent across different mode settings. Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-11-19Merge tag 'v4.9-rc4' into soundJonathan Corbet3-9/+15
Bring in -rc4 patches so I can successfully merge the sound doc changes.
2016-11-12nvdimm: use the right length of "pmem"Nicolas Iooss1-1/+1
In order to test that the name of a resource begins with "pmem", call strncmp() with 4 as length instead of 3 to match the whole prefix. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-11-12libnvdimm: check and clear poison before writing to pmemDave Jiang1-4/+26
We need to clear any poison when we are writing to pmem. The granularity will be sector size. If it's less then we can't do anything about it barring corruption. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> [djbw: fixup 0-length write request to succeed] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-28nvdimm: make CONFIG_NVDIMM_DAX 'bool'Arnd Bergmann1-1/+1
A bugfix just tried to address a randconfig build problem and introduced a variant of the same problem: with CONFIG_LIBNVDIMM=y and CONFIG_NVDIMM_DAX=m, the nvdimm module now fails to link: drivers/nvdimm/built-in.o: In function `to_nd_device_type': bus.c:(.text+0x1b5d): undefined reference to `is_nd_dax' drivers/nvdimm/built-in.o: In function `nd_region_notify_driver_action.constprop.2': region_devs.c:(.text+0x6b6c): undefined reference to `is_nd_dax' region_devs.c:(.text+0x6b8c): undefined reference to `to_nd_dax' drivers/nvdimm/built-in.o: In function `nd_region_probe': region.c:(.text+0x70f3): undefined reference to `nd_dax_create' drivers/nvdimm/built-in.o: In function `mode_show': namespace_devs.c:(.text+0xa196): undefined reference to `is_nd_dax' drivers/nvdimm/built-in.o: In function `nvdimm_namespace_common_probe': (.text+0xa55f): undefined reference to `is_nd_dax' drivers/nvdimm/built-in.o: In function `nvdimm_namespace_common_probe': (.text+0xa56e): undefined reference to `to_nd_dax' This reverts the earlier fix, making NVDIMM_DAX a 'bool' option again as it should be (it gets linked into the libnvdimm module). To fix the original problem, I'm adding a dependency on LIBNVDIMM to DEV_DAX_PMEM, which ensures we can't have that one built-in if the rest is a module. Fixes: 4e65e9381c7a ("/dev/dax: fix Kconfig dependency build breakage") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab1-1/+1
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-19pmem: report error on clear poison failureToshi Kani1-2/+6
ACPI Clear Uncorrectable Error DSM function may fail or may be unsupported on a platform. pmem_clear_poison() returns without clearing badblocks in such cases. This failure is detected at the next read (-EIO). This behavior can lead to an issue when user keeps writing but does not read immediately. For instance, flight recorder file may be only read when it is necessary for troubleshooting. Change pmem_do_bvec() and pmem_clear_poison() to return -EIO so that filesystem can log an error message on a write error. Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-19libnvdimm, namespace: potential NULL deref on allocation errorDan Carpenter1-6/+8
If the kcalloc() fails then "devs" can be NULL and we dereference it checking "devs[i]". Fixes: 1b40e09a1232 ('libnvdimm: blk labels and namespace instantiation') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-19libnvdimm: allow a platform to force enable label supportDan Williams3-0/+10
Platforms like QEMU-KVM implement an NFIT table and label DSMs. However, since that environment does not define an aliased configuration, the labels are currently ignored and the kernel registers a single full-sized pmem-namespace per region. Now that the kernel supports sub-divisions of pmem regions the labels have a purpose. Arrange for the labels to be honored when we find an existing / valid namespace index block. Cc: <qemu-devel@nongnu.org> Cc: Haozhong Zhang <haozhong.zhang@intel.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-19libnvdimm: use generic iostat interfacesToshi Kani2-31/+9
nd_iostat_start() and nd_iostat_end() implement the same functionality that generic_start_io_acct() and generic_end_io_acct() already provide. Change nd_iostat_start() and nd_iostat_end() to call the generic iostat interfaces. There is no change in the nd interfaces. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-08Merge branch 'for-4.9/dax' into libnvdimm-for-nextDan Williams1-1/+1
2016-10-08Merge branch 'for-4.9/libnvdimm' into libnvdimm-for-nextDan Williams10-400/+1035
2016-10-08/dev/dax: fix Kconfig dependency build breakageRoss Zwisler1-1/+1
The function dax_pmem_probe() in drivers/dax/pmem.c is compiled under the CONFIG_DEV_DAX_PMEM tri-state config option. This config option currently only depends on CONFIG_NVDIMM_DAX, a bool, which means that the following configuration is possible: CONFIG_LIBNVDIMM=m ... CONFIG_NVDIMM_DAX=y CONFIG_DEV_DAX=y CONFIG_DEV_DAX_PMEM=y With this config LIBNVDIMM is compiled as a module with NVDIMM_DAX=y just meaning that we will compile drivers/nvdimm/dax_devs.c into that module. However, dax_pmem_probe() depends on several symbols defined in drivers/nvdimm/dax_devs.c, which results in the following build errors: drivers/built-in.o: In function `dax_pmem_probe': linux/drivers/dax/pmem.c:70: undefined reference to `to_nd_dax' linux/drivers/dax/pmem.c:74: undefined reference to `nvdimm_namespace_common_probe' linux/drivers/dax/pmem.c:80: undefined reference to `devm_nsio_enable' linux/drivers/dax/pmem.c:81: undefined reference to `nvdimm_setup_pfn' linux/drivers/dax/pmem.c:84: undefined reference to `devm_nsio_disable' linux/drivers/dax/pmem.c:122: undefined reference to `to_nd_region' drivers/built-in.o: In function `dax_pmem_init': linux/drivers/dax/pmem.c:147: undefined reference to `__nd_driver_register' Fix this by making NVDIMM_DAX a tristate. DEV_DAX_PMEM depends on NVDIMM_DAX which depends on LIBNVDIMM. Since they are all now tristates, if LIBNVDIMM is built as a kernel module DEV_DAX_PMEM will be as well. This prevents dax_devs.c from being built as a built-in while its dependencies are in the libnvdimm.ko module. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: allow creation of multiple pmem-namespaces per regionDan Williams3-9/+59
Similar to BLK regions, publish new seed namespace devices to allow unused PMEM region capacity to be consumed by additional namespaces. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: lift single pmem limit in scan_labels()Dan Williams1-3/+0
Now that the rest of the infrastructure has been converted to handle multi-pmem configurations, lift the artificial barrier at scan time. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: filter out of range labels in scan_labels()Dan Williams1-2/+7
Short-circuit doomed-to-fail label validation attempts by skipping labels that are outside the given region. For example a DIMM that has multiple PMEM regions will waste time attempting to create namespaces only to find that the interleave-set-cookie does not validate, e.g.: nd_region region6: invalid cookie in label: 73e608dc-47b9-4b2a-b5c7-2d55a32e0c2 Similar to how we skip BLK labels when performing PMEM validation we can skip out-of-range labels early. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: enable allocation of multiple pmem namespacesDan Williams3-45/+133
Now that we have nd_region_available_dpa() able to handle the presence of multiple PMEM allocations in aliased PMEM regions, reuse that same infrastructure to track allocations from free space. In particular handle allocating from an aliased PMEM region in the case where there are dis-contiguous holes. The allocation for BLK and PMEM are documented in the space_valid() helper: BLK-space is valid as long as it does not precede a PMEM allocation in a given region. PMEM-space must be contiguous and adjacent to an existing existing allocation (if one exists). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: update label implementation for multi-pmemDan Williams1-19/+53
Instead of assuming that there will only ever be one allocated range at the start of the region, account for additional namespaces that might start at an offset from the region base. After this change pmem namespaces now have a reason to carry an array of resources similar to blk. Unifying the resource tracking infrastructure in nd_namespace_common is a future cleanup candidate. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: expand pmem device naming scheme for multi-pmemDan Williams1-1/+15
pmem devices are currently named /dev/pmem<region-index>. Preserve the naming of the 0th device, but add a ".<namespace-index>" for other devices. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, region: update nd_region_available_dpa() for multi-pmem supportDan Williams3-42/+139
The free dpa (dimm-physical-address) space calculation reports how much free space is available with consideration for aliased BLK + PMEM regions. Recall that BLK capacity is allocated from high addresses and PMEM is allocated from low addresses in their respective regions. nd_region_available_dpa() accounts for the fact that the largest encroachment (lowest starting address) into PMEM capacity by a BLK allocation limits the available capacity to that point, regardless if there is BLK allocation hole at a higher address. Similarly, for the multi-pmem case we need to track the largest encroachment (highest ending address) of a PMEM allocation in BLK capacity regardless of whether there is an allocation hole that a BLK allocation could fill at a lower address. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: sort namespaces by dpa at initDan Williams1-3/+32
Add more determinism to initial namespace device-name assignments by sorting the namespaces by starting dpa. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: allow multiple pmem-namespaces per region at scan timeDan Williams1-12/+72
If label scanning finds multiple valid pmem namespaces allow them to be surfaced rather than fail namespace scanning. Support for creating multiple namespaces per region is saved for a later patch. Note that this adds some new error messages to clarify which of the pmem namespaces in the set are potentially impacted by invalid labels. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-06libnvdimm, namespace: unify blk and pmem label scanningDan Williams1-178/+207
In preparation for allowing multiple namespace per pmem region, unify blk and pmem label scanning. Given that blk regions already support multiple namespaces, teaching that path how to do pmem namespace scanning is an incremental step towards multiple pmem namespace support. This should be functionally equivalent to the previous state in that stops after finding the first valid pmem label set. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-06libnvdimm, namespace: refactor uuid_show() into a namespace_to_uuid() helperDan Williams1-7/+12
The ability to translate a generic struct device pointer into a namespace uuid is a useful utility as we go to unify the blk and pmem label scanning paths. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-01libnvdimm, label: convert label tracking to a linked listDan Williams5-120/+225
In preparation for enabling multiple namespaces per pmem region, convert the label tracking to use a linked list. In particular this will allow select_pmem_id() to move labels from the unvalidated state to the validated state. Currently we only track one validated set per-region. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-01libnvdimm, region: move region-mapping input-paramters to nd_mapping_descDan Williams2-7/+23
Before we add more libnvdimm-private fields to nd_mapping make it clear which parameters are input vs libnvdimm internals. Use struct nd_mapping_desc instead of struct nd_mapping in nd_region_desc and make struct nd_mapping private to libnvdimm. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-01nvdimm: reduce duplicated wpq flushesDave Jiang1-1/+16
Existing implemenetation writes to all the flush hint addresses for a given ND region. This is not necessary as the flushes are per imc and not per DIMM. Search the mappings and clear out the duplicates at init to avoid multiple flush to the same imc. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-01libnvdimm: clear the internal poison_list when clearing badblocksVishal Verma2-4/+71
nvdimm_clear_poison cleared the user-visible badblocks, and sent commands to the NVDIMM to clear the areas marked as 'poison', but it neglected to clear the same areas from the internal poison_list which is used to marshal ARS results before sorting them by namespace. As a result, once on-demand ARS functionality was added: 37b137f nfit, libnvdimm: allow an ARS scrub to be triggered on demand A scrub triggered from either sysfs or an MCE was found to be adding stale entries that had been cleared from gendisk->badblocks, but were still present in nvdimm_bus->poison_list. Additionally, the stale entries could be triggered into producing stale disk->badblocks by simply disabling and re-enabling the namespace or region. This adds the missing step of clearing poison_list entries when clearing poison, so that it is always in sync with badblocks. Fixes: 37b137f ("nfit, libnvdimm: allow an ARS scrub to be triggered on demand") Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-01pmem: reduce kmap_atomic sections to the memcpys onlyVishal Verma1-5/+23
pmem_do_bvec used to kmap_atomic at the begin, and only unmap at the end. Things like nvdimm_clear_poison may want to do nvdimm subsystem bookkeeping operations that may involve taking locks or doing memory allocations, and we can't do that from the atomic context. Reduce the atomic context to just what needs it - the memcpy to/from pmem. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-24libnvdimm, region: fix flush hint table thinkoDan Williams2-10/+32
The definition of the flush hint table as: void __iomem *flush_wpq[0][0]; ...passed the unit test, but is broken as flush_wpq[0][1] and flush_wpq[1][0] refer to the same entry. Fix this to use a helper that calculates a slot in the table based on the geometry of flush hints in the region. This is important to get right since virtualization solutions use this mechanism to trigger hypervisor flushes to platform persistence. Reported-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-22nvdimm: remove duplicate nd_mapping declarationDave Jiang1-1/+0
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-21libnvdimm, namespace: debug invalid interleave-set-cookie valuesDan Williams1-1/+3
If platform firmware fails to populate unique / non-zero serial number data for each nvdimm in an interleave-set it may cause pmem region initialization to fail. Add a debug message for this case. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 12:38:04 +0300