summaryrefslogtreecommitdiff
path: root/drivers/nfc/s3fwrn5/i2c.c
AgeCommit message (Collapse)AuthorFilesLines
2023-05-22nfc: Switch i2c drivers back to use .probe()Uwe Kleine-König1-1/+1
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-23nfc: s3fwrn5: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-28nfc: s3fwrn5: use devm_clk_get_optional_enabled() helperDmitry Torokhov1-14/+5
Because we enable the clock immediately after acquiring it in probe, we can combine the 2 operations and use devm_clk_get_optional_enabled() helper. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König1-3/+1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-29nfc: s3fwrn5: mark OF device ID tables as maybe unusedKrzysztof Kozlowski1-1/+1
The driver can match either via OF or I2C ID tables. If OF is disabled, the table will be unused: drivers/nfc/s3fwrn5/i2c.c:265:34: warning: ‘of_s3fwrn5_i2c_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210528124200.79655-8-krzysztof.kozlowski@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-19nfc: s3fwrn5: i2c: Enable optional clock from device treeStephan Gerhold1-2/+28
S3FWRN5 depends on a clock input ("XI" pin) to function properly. Depending on the hardware configuration this could be an always-on oscillator or some external clock that must be explicitly enabled. So far we assumed that the clock is always-on. Make the driver request an (optional) clock from the device tree and make sure the clock is running before starting S3FWRN5. Note: S3FWRN5 asserts "GPIO2" whenever it needs the clock input to function correctly. On some hardware configurations, GPIO2 is connected directly to an input pin of the external clock provider (e.g. the main PMIC of the SoC). In that case, it can automatically AND the clock enable bit and clock request from S3FWRN5 so that the clock is actually only enabled when needed. It is also conceivable that on some other hardware configuration S3FWRN5's GPIO2 might be connected as a regular GPIO input of the SoC. In that case, follow-up patches could extend the driver to request the GPIO, set up an interrupt and only enable the clock when requested by S3FWRN5. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-13nfc: s3fwrn5: let core configure the interrupt triggerKrzysztof Kozlowski1-6/+1
If interrupt trigger is not set when requesting the interrupt, the core will take care of reading trigger type from Devicetree. There is no point to do it in the driver. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201210211824.214949-1-krzk@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c moduleBongsu Jeon1-1/+6
For the flexible control of interrupt trigger type, remove the hard coded interrupt trigger type in the i2c module. The trigger type will be loaded from a dts. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-03nfc: s3fwrn5: extract the common phy blocksBongsu Jeon1-78/+39
Extract the common phy blocks to reuse it. The UART module will use the common blocks. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03nfc: s3fwrn5: reduce the EN_WAIT_TIMEBongsu Jeon1-3/+3
The delay of 20ms is enough to enable and wake up the Samsung's nfc chip. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25nfc: s3fwrn5: use signed integer for parsing GPIO numbersKrzysztof Kozlowski1-2/+2
GPIOs - as returned by of_get_named_gpio() and used by the gpiolib - are signed integers, where negative number indicates error. The return value of of_get_named_gpio() should not be assigned to an unsigned int because in case of !CONFIG_GPIOLIB such number would be a valid GPIO. Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201123162351.209100-1-krzk@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19nfc: s3fwrn5: Remove the max_payloadBongsu Jeon1-3/+1
max_payload is unused. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20201117080824epcms2p36f70e06e2d8bd51d1af278b26ca65725@epcms2p3 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-11nfc: s3fwrn5: Remove unneeded 'ret' variableKrzysztof Kozlowski1-3/+1
The local variable 'ret' can be removed: drivers/nfc/s3fwrn5/i2c.c:167:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11nfc: s3fwrn5: Remove wrong vendor prefix from GPIOsKrzysztof Kozlowski1-6/+14
The device tree property prefix describes the vendor, which in case of S3FWRN5 chip is Samsung. Therefore the "s3fwrn5" prefix for "en-gpios" and "fw-gpios" is not correct and should be deprecated. Introduce properly named properties for these GPIOs but still support deprecated ones. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06nfc: s3fwrn5: fix platform_no_drv_owner.cocci warningYueHaibing1-1/+0
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 or later as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 7 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091651.504392586@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06nfc: s3fwrn5: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-1/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-20nfc: s3fwrn5: constify s3fwrn5_phy_ops structuresJulia Lawall1-1/+1
The s3fwrn5_phy_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-07nfc: s3fwrn5: i2c: Use devm_request_threaded_irq to avoid irq leakAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC ChipRobert Baldyga1-0/+306
Add driver for Samsung S3FWRN5 NFC controller. S3FWRN5 is using NCI protocol and I2C communication interface. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-20 15:24:51 +0300