summaryrefslogtreecommitdiff
path: root/drivers/nfc/pn533.c
AgeCommit message (Collapse)AuthorFilesLines
2014-02-24NFC: pn533: Convert to use USB_DEVICE macroAxel Lin1-20/+8
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-04NFC: pn533: Frame is invalid if ccid.datalen is 0Samuel Ortiz1-0/+3
Some ACR122 firmwares seem to send 0 length data frames. Before using that length as a data index, we check that it's not 0. If it is we report the frame as being invalid. Reported-by: Arthur Taylor <arthur@advancedtelematic.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-12-11nfc: Fix FSF address in file headersJeff Kirsher1-3/+1
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: linux-wireless@vger.kernel.org CC: Lauro Ramos Venancio <lauro.venancio@openbossa.org> CC: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> CC: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-25NFC: pn533: Target mode Tx fragmentation supportOlivier Guiter1-7/+70
In target mode, when we want to send frames larger than the max length (PN533_CMD_DATAEXCH_DATA_MAXLEN), we have to split the frame in smaller chunks and send them, using a specific working queue, with the TgSetMetaData command. TgSetMetaData sets his own MI bit in the PFB. The last chunk is sent using the TgSetData command. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Add support for incoming fragmented frame in target modeOlivier Guiter1-8/+64
This code processes, for Target Mode, incoming fragmented frames. If the MI bit is present, we start a working queue to grab and aggregate all the parts (using TmGetData between each parts). On the last one, as there's no more MI bit, we jump on the usual behavior. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Add MI/TG bits only when in Initiator modeOlivier Guiter1-8/+11
The fragmentation routine (used to split big frames) could be used in target or initiator mode (TgSetMetaData vs InDataExchange), but the MI/TG bytes are not needed in target mode (TgSetMetaData), so we add a check on the mode Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Staticize local symbolsSachin Kamat1-2/+2
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Start listen timer from start_pollSamuel Ortiz1-1/+11
If we start the polling loop from a listening cycle, we need to start the corresponding timer as well. This bug showed up after commit dfccd0f5 as it was impossible to start from a listening cycle before it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: pn533: Send ATR_REQ directly for active device detectionSamuel Ortiz1-1/+120
In order to improve active devices detection, we send an ATR_REQ between each passive detection cycle. Without this algorithm, Android 4.3 based devices running the Broadcom stack are hardly detected. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Standardize logging styleJoe Perches1-3/+2
Use standardized styles to minimize coding defects. Always use nfc_<level> where feasible. Add \n to formats where appropriate. Typo "it it" correction. Add #define pr_fmt where appropriate. Remove function tracing logging messages. Remove OOM messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Convert nfc_dev_info and nfc_dev_err to nfc_<level>Joe Perches1-90/+85
Use a more standard kernel style macro logging name. Standardize the spacing of the "NFC: " prefix. Add \n to uses, remove from macro. Fix the defective uses that already had a \n. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-25NFC: Replace nfc_dev_dbg with dev_dbgJoe Perches1-75/+62
Use the generic kernel function instead of a home-grown one that does the same thing. Add \n to uses not at the macro. Don't add \n where the nfc_dev_dbg macro mistakenly had them already. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Add some polling entropySamuel Ortiz1-1/+6
By not always starting the polling loop from the same modulation, we avoid entering infinite loops where devices exporting 2 targets (on 2 different modulations) get the same target activated over and over. If this target is not readable (e.g. a wallet emulating a tag), we will stay in an error loop for ever. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Add delay between each poll frameSamuel Ortiz1-5/+11
It seems that some pn533 firmwares go belly up when being asked to send poll frames too frequently. Adding a 10ms delay between each of them calm the chip down and prevent it from crashing. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Store the correct frame size (normal vs ext)Olivier Guiter1-9/+7
The extended information frame are sent by PN533 to exchange frames larger than 255 bytes. These extended frame are very close from the standard ones except for the header size length. On each incoming frame, we set the correct header length, and we do that only for the standard pn533 chipsets as the acr122 does not seem to support extended frames properly. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Split large Tx frames in chunksOlivier Guiter1-14/+130
On sending large frames (size > 262), we split it in multiple chunks and send them asynchronously with MI bit. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Add extended information frame decoding supportOlivier Guiter1-13/+72
Extended Information frames are slightly different from standard frames as they can (theorically) handle datas up tu 64kB. PN533 firmware only supports packet data up to 265 (incl. TFI byte) This kind of frame are used when the pn533 wants to exchange more than 255 bytes, and this patch handles the reception of such frames. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Enable AUTO RFCASamuel Ortiz1-3/+6
The AUTO RFCA bit forbids the pn533 chipset to turn its radio on whenever an external field is present. Without this bit set, some devices seems to get over flood by the pn533 rf field and thus become hardly detectable. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Unconditionaly select the highest p2p bit rateSamuel Ortiz1-36/+20
p2p devices must be able to support 424 kbps, so we should always select that bitrate in initiator mode. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Request System code from SENSF_REQSamuel Ortiz1-2/+2
Some devices are getting confused when not being asked for their system code with type F. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Fix the pn533 polling loopSamuel Ortiz1-1/+54
By turning the radio off after each failed polling try, we dramatically improve the pn533 polling loop efficiency. Without this fix, all Android phones running the broadcom NFC stack are almost never detected. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-14NFC: pn533: Fix hardware busy loop when establishing the LLCP linkSamuel Ortiz1-11/+0
By using the standard setting for the regular pn533 dongles, we no longer wait for ever for an ATR_RES. Without this, a failing ATR_REQ will put the hardware into a busy loop, constantly waiting for an ATR_RES. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-9/+22
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-06-14NFC: pn533: Fix ACR122 related debug outputOlivier Guiter1-4/+4
Instead of dumping ACR122 frames as errors, we use the print_hex_dump() dynamic debug APIs. We also print an accurate IC version, as the ACR122 is pn532 based. Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Remove the static supported_se fieldSamuel Ortiz1-1/+0
Supported secure elements are typically found during a discovery process initiated when the NFC controller is up and running. For a given NFC chipset there can be many configurations (embedded SE or not, with or without a SIM card wired to the NFC controller SWP interface, etc...) and thus driver code will never know before hand which SEs are available. So we remove this field, it will be replaced by a real SE discovery mechanism. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn533: Copy NFCID2 through ATR_REQSamuel Ortiz1-1/+13
When using NFC-F we should copy the NFCID2 buffer that we got from SENSF_RES through the ATR_REQ NFCID3 buffer. Not doing so violates NFC Forum digital requirement #189. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn533: Use 0x3 for SENSF_REQ Time Slot Number (TSN)Samuel Ortiz1-2/+2
LLCP validation requires TSN to be 0x03 for type F. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: pn533: Fix error return code in pn533_probe()Wei Yongjun1-1/+3
Fix to return -ENOMEM in the nfc device alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-28treewide: Fix typo in printkMasanari Iida1-1/+1
Correct spelling typo in various part of drivers Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-11NFC: pn533: Turn radio on and off when bringing the device up and downSamuel Ortiz1-4/+35
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Add missing usb_put_devMarina Makienko1-0/+1
Add missing usb_put_dev on failure path in pn533_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Marina Makienko <makienko@ispras.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Increase version numberWaldemar Rymarkiewicz1-1/+1
Major features added in 0.2 version: * frame ops added to support wider set of devices * support of ACS ACR122U Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Remove unused pn533_cmd_complete_tWaldemar Rymarkiewicz1-2/+0
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Add pn533_abort_cmd procedureWaldemar Rymarkiewicz1-14/+21
pn533_abort_cmd() aborts last command sent to the controller and cancels already requested urb. As ACR122U does not support any mechanism (as ACK for standard PN533) which aborts last command this cannot be issued for this device. Otherwise, acr122u will behave in an unstable way. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Add support for ACS ACR122U readerWaldemar Rymarkiewicz1-2/+217
ACS ACR122U is an USB NFC reader, PC/SC and CCID compilant, based on NXP PN532 chip. Internally, it's build of MCU, PN532 and an antenna. MCU makes the device CCID and PC/SC compilant and provide USB connection. In this achitecture, a host cannot talk directly to PN532 and must rely on MCU. Luckily, MCU exposes pseud-APDU through PC/SC Escape mechanism which let the host to transmit standard PN532 commands directly to PN532 chip with some limitations. The frame roughly looks like: CCID header | APDU header | PN532 header (pc_to_rdr_escape) | (pseudo apdu Direct Tramsmit) | (len, TFI, cmd, params) Accordign to limitations, ACR122U does't provide any mechanism to abort last issued command. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Add protocol type for frame opsWaldemar Rymarkiewicz1-3/+18
As not all devices require ACK confirmation of every request sent to the controller, differentiate two protocol types. First one, request-ack-response and the second one request-response type. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Move wq_in_error to cmd contextWaldemar Rymarkiewicz1-12/+12
Rename 'wq_in_error' field to more relevant 'status' and move it to cmd context struct. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Re-group fields in struct pn533Waldemar Rymarkiewicz1-9/+8
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Avoid function declarationsWaldemar Rymarkiewicz1-12/+10
Reorder code to avoid functions declaration. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Simplify __pn533_send_frame_asyncWaldemar Rymarkiewicz1-17/+9
In all cases (send_cmd_async, send_data_async and send_sync) pn533_send_async_complete() handles all responses internally, so there is no need to pass this as a callback. Cmd context is passed to __pn533_send_frame_async in all the cases as well. It's already kept in struct pn533 which is available all the time the device is attached. So we can make use of it instead. Therefore, cmd_complete and cmd_complete_arg are no needed any more. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Fix incorrect kfree of complete argsWaldemar Rymarkiewicz1-1/+1
We must free 'cmd_complete_mi_arg' and not 'cmd_complete_arg' when getting send error handling fragmented response. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Remove redundant cmd_ prefix in the structWaldemar Rymarkiewicz1-4/+4
'cmd->code' looks better then 'cmd->cmd_code' Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Keep cmd context in pn533 structWaldemar Rymarkiewicz1-5/+12
Keep cmd context in pn533 struct instead of only cmd code. The context already includes cmd_code. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Optimise issued cmd context trackingWaldemar Rymarkiewicz1-52/+35
Use struct pn533_cmd instead of pn533_send_async_complete_arg to track the context of the issued cmd. This way pn533_send_async_complete_arg struct is no needed anymore. Just move issuer complete callback to pn533_cmd struct. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Fix memleak while scheduling next cmdWaldemar Rymarkiewicz1-2/+8
In case of error from __pn533_send_frame_async() while sending next cmd from the queue (cmd_wq), cmd->req, cmd->resp and cmd->arg pointers won't be freed. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Rename pn533_fw_reset appropriatelyWaldemar Rymarkiewicz1-3/+3
Define explicitely it is Pasori specific reset command. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Update copyrights noteWaldemar Rymarkiewicz1-6/+4
Remove duplicated authors info from the header as well. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Fix div by zero while stopping pollingWaldemar Rymarkiewicz1-0/+5
Depends on timing division by zero can happen when user stops polling. pn533_stop_poll() resets modulation counter on stop_poll, but meanwhile we get response for last poll request and try, despite of stop poll request, to schedule next modulation for polling. Log message: [345.922515] pn533 1-1.3:1.0: pn533_stop_poll [345.928314] pn533 1-1.3:1.0: pn533_send_ack [345.932769] pn533 1-1.3:1.0: Received a frame. [345.937438] PN533 RX: 00 00 ff 03 fd d5 4b 00 e0 00 [345.942840] pn533 1-1.3:1.0: pn533_poll_complete [345.947753] pn533 1-1.3:1.0: pn533_start_poll_complete [345.953186] Division by zero in kernel. [345.957244] [<c001b38c>] (unwind_backtrace+0x0/0xf0) [345.965698] [<c0260e78>] (Ldiv0+0x8/0x10) [345.974060] [<c0260e60>] (__aeabi_idivmod+0x8/0x18) [345.983978] [<c02e0064>] (pn533_poll_complete+0x3c0/0x500) [345.994903] [<c02df690>] (pn533_send_async_complete+0x7c/0xc0) [346.005828] [<c02e028c>] (pn533_wq_cmd_complete+0x1c/0x34) [346.016113] [<c005d134>] (process_one_work+0x1ac/0x57c) [346.025848] [<c005d85c>] (worker_thread+0x168/0x42c) [346.034576] [<c00620c0>] (kthread+0xa4/0xb0) Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Print out response status bits in hexWaldemar Rymarkiewicz1-3/+4
For better debugging as the codes are defined in hex in the spec. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-11NFC: pn533: Reword all std frame logic functWaldemar Rymarkiewicz1-60/+61
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 23:04:04 +0300