| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It will be replaced with page pool's built-in recycling.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250213010635.1354034-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx4 doesn't support ndo_xdp_xmit / XDP_REDIRECT and wasn't
using page pool until now, so it could run XDP completions
in netpoll (NAPI budget == 0) just fine. Page pool has calling
context requirements, make sure we don't try to call it from
what is potentially HW IRQ context.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250213010635.1354034-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a pool per rx queue. Subsequent patches will make use of it.
Move fcs_del to a hole to make space for the pointer.
Per common "wisdom" base the page pool size on the ring size.
Note that the page pool cache size is in full pages, so just
round up the effective buffer size to pages.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250213010635.1354034-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a possibility for an uninitialized *ret* variable to be
returned in some code paths.
This explicitly returns 0 without an error. Also removes goto that
returned *ret* and simply returns in place.
Closes: https://scan5.scan.coverity.com/#/project-view/63541/10063?selectedIssue=1642337
Fixes: b716a10d99a2 ("wifi: ath12k: enable MLO setup and teardown from core")
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250210-ath12k-uninit-v2-1-3596f28dd380@ethancedwards.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In case of firmware assert snapshot of firmware memory is essential for
debugging. Add firmware coredump collection support for PCI bus.
Collect RDDM and firmware paging dumps from MHI and pack them in TLV
format and also pack various memory shared during QMI phase in separate
TLVs. Add necessary header and share the dumps to user space using dev
coredump framework. Coredump collection is controlled by
CONFIG_DEV_COREDUMP. Dump collected for a radio is 55 MB approximately.
The changeset is mostly copied from:
https://lore.kernel.org/all/20240325183414.4016663-1-quic_ssreeela@quicinc.com/.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04358-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240813013028.2708111-2-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The value of 'ab->hw_params.fixed_mem_region' determines that
only one variable 'vaddr' or 'iaddr' is used in target_mem_chunk.
So use an anonymous union instead, easy to check whether the
memory is set or not.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04358-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240813013028.2708111-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.
Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/82dcc0eae40bb84e6452f242751c0650e79bd87e.1738746927.git.namcao@linutronix.de
|
|
When adding LED support for mv88q222x devices the PHY private data
structure was added to the mv88q211x code path, the data structure is
however only allocated during mv88q222x probe. This results in a nullptr
deference for mv88q2110 devices.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000001
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[0000000000000001] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-arm64-renesas-00342-ga3783dbf2574 #7
Hardware name: Renesas White Hawk Single board based on r8a779g2 (DT)
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mv88q2xxx_config_init+0x28/0x84
lr : mv88q2110_config_init+0x98/0xb0
sp : ffff8000823eb9d0
x29: ffff8000823eb9d0 x28: ffff000440942000 x27: ffff80008144e400
x26: 0000000000001002 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000009 x22: ffff8000810534f0 x21: ffff800081053550
x20: 0000000000000000 x19: ffff0004437d6800 x18: 0000000000000018
x17: 00000000000961c8 x16: ffff0006bef75ec0 x15: 0000000000000001
x14: 0000000000000001 x13: ffff000440218080 x12: 071c71c71c71c71c
x11: ffff000440218080 x10: 0000000000001420 x9 : ffff8000823eb770
x8 : ffff8000823eb650 x7 : ffff8000823eb750 x6 : ffff8000823eb710
x5 : 0000000000000000 x4 : 0000000000000800 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 00000000ffffffff x0 : ffff0004437d6800
Call trace:
mv88q2xxx_config_init+0x28/0x84 (P)
mv88q2110_config_init+0x98/0xb0
phy_init_hw+0x64/0x9c
phy_attach_direct+0x118/0x320
phy_connect_direct+0x24/0x80
of_phy_connect+0x5c/0xa0
rtsn_open+0x5bc/0x78c
__dev_open+0xf8/0x1fc
__dev_change_flags+0x198/0x220
dev_change_flags+0x20/0x64
ip_auto_config+0x270/0xefc
do_one_initcall+0xe4/0x22c
kernel_init_freeable+0x2a8/0x308
kernel_init+0x20/0x130
ret_from_fork+0x10/0x20
Code: b907e404 f9432814 3100083f 540000e3 (39400680)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x000,00000070,00801250,8200700b
Memory Limit: none
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fix this by using a generic probe function for both mv88q211x and
mv88q222x devices that allocates the PHY private data structure, while
only the mv88q222x probes for LED support.
Fixes: a3783dbf2574 ("net: phy: marvell-88q2xxx: Add support for PHY LEDs on 88q2xxx")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250214174650.2056949-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Temperature sensor gets enabled for 88Q222X devices in
mv88q222x_config_init. Move enabling to mv88q2xxx_config_init because
all 88Q2XXX devices support the temperature sensor.
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Order includes alphabetically.
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Align some defines.
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a vxlan netdevice is brought up, if its default remote is a multicast
address, the device joins the indicated group.
Therefore when the multicast remote address changes, the device should
leave the current group and subscribe to the new one. Similarly when the
interface used for endpoint communication is changed in a situation when
multicast remote is configured. This is currently not done.
Both vxlan_igmp_join() and vxlan_igmp_leave() can however fail. So it is
possible that with such fix, the netdevice will end up in an inconsistent
situation where the old group is not joined anymore, but joining the new
group fails. Should we join the new group first, and leave the old one
second, we might end up in the opposite situation, where both groups are
joined. Undoing any of this during rollback is going to be similarly
problematic.
One solution would be to just forbid the change when the netdevice is up.
However in vnifilter mode, changing the group address is allowed, and these
problems are simply ignored (see vxlan_vni_update_group()):
# ip link add name br up type bridge vlan_filtering 1
# ip link add vx1 up master br type vxlan external vnifilter local 192.0.2.1 dev lo dstport 4789
# bridge vni add dev vx1 vni 200 group 224.0.0.1
# tcpdump -i lo &
# bridge vni add dev vx1 vni 200 group 224.0.0.2
18:55:46.523438 IP 0.0.0.0 > 224.0.0.22: igmp v3 report, 1 group record(s)
18:55:46.943447 IP 0.0.0.0 > 224.0.0.22: igmp v3 report, 1 group record(s)
# bridge vni
dev vni group/remote
vx1 200 224.0.0.2
Having two different modes of operation for conceptually the same interface
is silly, so in this patch, just do what the vnifilter code does and deal
with the errors by crossing fingers real hard.
The vnifilter code leaves old before joining new, and in case of join /
leave failures does not roll back the configuration changes that have
already been applied, but bails out of joining if it could not leave. Do
the same here: leave before join, apply changes unconditionally and do not
attempt to join if we couldn't leave.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vxlan_dev_configure() only has a single caller that passes false
for the changelink parameter. Drop the parameter and inline the
sole value.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch implements below changes,
1. To avoid concurrency with normal traffic uses
XDP queues.
2. Since there are chances that XDP and AF_XDP can
fall under same queue uses separate flags to handle
dma buffers.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement necessary APIs required for AF_XDP transmit.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RSS table needs to be reconfigured once a rx queue is enabled or
disabled for AF_XDP zerocopy support. After enabling UMEM on a rx queue,
that queue should not be part of RSS queue selection algorithm.
Similarly the queue should be considered again after UMEM is disabled.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds support to AF_XDP zero copy for CN10K.
This patch specifically adds receive side support. In this approach once
a xdp program with zero copy support on a specific rx queue is enabled,
then that receive quse is disabled/detached from the existing kernel
queue and re-assigned to the umem memory.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Set xdp rx ring memory type as MEM_TYPE_PAGE_POOL for
af-xdp to work. This is needed since xdp_return_frame
internally will use page pools.
Fixes: 06059a1a9a4a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xdp_return_frames() will help to free the xdp frames and their
associated pages back to page pool.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a935bc6ca7933053f9e349578da4a8fb477b7c2d.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/baeaabb84aef1803dfae385f6e9614d6fc547667.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely. This new function replaces
hrtimer_init().
However, converting this driver is not obvious: the driver calls
hrtimer_init() in rt2x00dev.c, then set the hrtimer's callback function in
rt2800mmio.c and rt2800usb.c. Therefore, switching to the new function is
not a simple one-for-one replacement.
With the lack of hardware to verify any non-trivial changes, keep it simple
and calls hrtimer_setup() with hrtimer_dummy_timeout() as callback function
pointer.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/f086be77528edf0dfb455af4cb984b863084a455.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/71fbc442aee9a9e892e475f3bbf8f368c6692a55.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/219735f98754fb30dcfd892fbaa5766f9d78c1f1.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e42d7d29879017d4b5ca9555f806e782658e3f21.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/c68759ce7879a41d33d1d435c721f156cb1683c2.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/73598e0c22ca99ce7a0e863298a0e0902f4d6e1d.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/4312885d95fc99053b2c285f74cc83a852c03f4a.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/44e2ebca1a3c1b90213cdb79f7a19ebe0ae70510.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/9f701c1b64e248539772aee62e130a7e50bbf1b0.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d8f0e09bfa4bd4850e363645cc634afeb5779b88.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/11f5140e157cc0cd02a715f531217b021743aa71.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/2d8fcf9bf83af507f1ca25cb068af2ac32cdcb2c.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/ddbeac1e5d81df33e9cccb099f520111cb8ce9c4.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/bd34d3d0dba9a47b6ec5d14776941e9aa118c7d2.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/af32e1b1814263485be17bca9707d555f857c53f.1738746872.git.namcao@linutronix.de
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/f1a87fcba211f6ce262a2d23fd152185f452c32d.1738746872.git.namcao@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice, iavf: Add support for Rx timestamping
Mateusz Polchlopek says:
Initially, during VF creation it registers the PTP clock in
the system and negotiates with PF it's capabilities. In the
meantime the PF enables the Flexible Descriptor for VF.
Only this type of descriptor allows to receive Rx timestamps.
Enabling virtual clock would be possible, though it would probably
perform poorly due to the lack of direct time access.
Enable timestamping should be done using userspace tools, e.g.
hwstamp_ctl -i $VF -r 14
In order to report the timestamps to userspace, the VF extends
timestamp to 40b.
To support this feature the flexible descriptors and PTP part
in iavf driver have been introduced.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add support for Rx timestamps to hotpath
iavf: handle set and get timestamps ops
iavf: Implement checking DD desc field
iavf: refactor iavf_clean_rx_irq to support legacy and flex descriptors
iavf: define Rx descriptors as qwords
libeth: move idpf_rx_csum_decoded and idpf_rx_extracted
iavf: periodically cache PHC time
iavf: add support for indirect access to PHC time
iavf: add initial framework for registering PTP clock
iavf: negotiate PTP capabilities
iavf: add support for negotiating flexible RXDID format
virtchnl: add enumeration for the rxdid format
ice: support Rx timestamp on flex descriptor
virtchnl: add support for enabling PTP on iAVF
====================
Link: https://patch.msgid.link/20250214192739.1175740-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add TSO support to the driver. Device can handle unencapsulated or
IPv6-in-IPv6 packets. Any other tunnel stacks are handled with
GSO partial.
Validate that the packet can be offloaded in ndo_features_check.
Main thing we need to check for is that the header geometry can
be expressed in the decriptor fields (offsets aren't too large).
Report number of TSO super-packets via the qstat API.
Link: https://patch.msgid.link/20250216174109.2808351-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-3-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helper which returns the tx amplitude gain defined in device tree.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-2-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, a temperature event message included a bitmap indicating
which sensors detect high temperatures.
To enhance clarity, we modify the message format to explicitly list
the names of the overheating sensors, alongside the sensors bitmap.
If HWMON is not configured, the event message remains unchanged.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213094641.226501-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the sensor_count field of the MTEWE register, bits 1-62 are
supported only for unmanaged switches, not for NICs, and bit 63
is reserved for internal use.
To prevent confusing output that may include set bits that are
not relevant to NIC sensors, we update the bitmask to retain only
the first bit, which corresponds to the sensor ASIC.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepend '0x' to the sensor bitmap in the warning message to clearly
indicate that the bitmap is in hexadecimal format.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap the high temperature warning in a temperature event with
a call to net_ratelimit() to prevent flooding the kernel log
with repeated warning messages when temperature exceeds the
threshold multiple times within a short duration.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move some macros to phy-lib because MediaTek's 2.5G built-in
ethernet PHY will also use them.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-6-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to __mtk_tr_set_bits() support. Previously in mtk-ge-soc.c,
we clear some register bits via token ring, which were also implemented
in three __phy_write(). Now we can do the same thing via
__mtk_tr_clr_bits() helper.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-5-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously in mtk-ge-soc.c, we set some register bits via token
ring, which were implemented in three __phy_write().
Now we can do the same thing via __mtk_tr_set_bits() helper.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-4-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds TR(token ring) manipulations and adds correct
macro names for those magic numbers. TR is a way to access
proprietary registers on page 52b5. Use these helper functions
so we can see which fields we're going to modify/set/clear.
TR functions with __* prefix mean that the operations inside
aren't wrapped by page select/restore functions.
This patch doesn't really change registers' settings but just
enhances readability and maintainability.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-3-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
