summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-12-23dpaa2-switch: do not clear any interrupts automaticallyIoana Ciornei1-2/+2
The DPSW object has multiple event sources multiplexed over the same IRQ. The driver has the capability to configure only some of these events to trigger the IRQ. The dpsw_get_irq_status() can clear events automatically based on the value stored in the 'status' variable passed to it. We don't want that to happen because we could get into a situation when we are clearing more events than we actually handled. Just resort to manually clearing the events that we handled. Also, since status is not used on the out path we remove its initialization to zero. This change does not have a user-visible effect because the dpaa2-switch driver enables and handles all the DPSW events which exist at the moment. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23dpaa2-switch: add ENDPOINT_CHANGED to the irq_maskIoana Ciornei1-1/+1
Commit 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support") added support for MAC endpoints in the dpaa2-switch driver but omitted to add the ENDPOINT_CHANGED irq to the list of interrupt sources. Fix this by extending the list of events which can raise an interrupt by extending the mask passed to the dpsw_set_irq_mask() firmware API. There is no user visible impact even without this patch since whenever a switch interface is connected/disconnected from an endpoint both events are set (LINK_CHANGED and ENDPOINT_CHANGED) and, luckily, the LINK_CHANGED event could actually raise the interrupt and thus get the MAC/PHY SW configuration started. Even with this, it's better to just not rely on undocumented firmware behavior which can change. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23dpaa2-switch: print an error when the vlan is already configuredIoana Ciornei1-2/+4
Print a netdev error when we hit a case in which a specific VLAN is already configured on the port. While at it, change the already existing netdev_warn into an _err for consistency purposes. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23dpaa2-switch: declare the netdev as IFF_LIVE_ADDR_CHANGE capableIoana Ciornei1-0/+1
There is no restriction around the change of the MAC address on the switch ports, thus declare the interface netdevs IFF_LIVE_ADDR_CHANGE capable. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23dpaa2-switch: set interface MAC address only on endpoint changeIoana Ciornei1-3/+2
There is no point in updating the MAC address of a switch interface each time the link state changes, this only needs to happen in case the endpoint changes (the switch interface is [dis]connected from/to a MAC). Just move the call to dpaa2_switch_port_set_mac_addr() under DPSW_IRQ_EVENT_ENDPOINT_CHANGED. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: ti: am65-cpsw: add sw tx/rx irq coalescing based on hrtimersGrygorii Strashko3-8/+134
Add SW IRQ coalescing based on hrtimers for TX and RX data path which can be enabled by ethtool commands: - RX coalescing ethtool -C eth1 rx-usecs 50 - TX coalescing can be enabled per TX queue - by default enables coalesing for TX0 ethtool -C eth1 tx-usecs 50 - configure TX0 ethtool -Q eth0 queue_mask 1 --coalesce tx-usecs 100 - configure TX1 ethtool -Q eth0 queue_mask 2 --coalesce tx-usecs 100 - configure TX0 and TX1 ethtool -Q eth0 queue_mask 3 --coalesce tx-usecs 100 --coalesce tx-usecs 100 show configuration for TX0 and TX1: ethtool -Q eth0 queue_mask 3 --show-coalesce Comparing to gro_flush_timeout and napi_defer_hard_irqs, this patch allows to enable IRQ coalesing for RX path separately. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge supportRoger Quadros6-2/+456
Add driver support for viewing / changing the MAC Merge sublayer parameters and seeing the verification state machine's current state via ethtool. As hardware does not support interrupt notification for verification events we resort to polling on link up. On link up we try a couple of times for verification success and if unsuccessful then give up. The Frame Preemption feature is described in the Technical Reference Manual [1] in section: 12.3.1.4.6.7 Intersperced Express Traffic (IET – P802.3br/D2.0) Due to Silicon Errata i2208 [2] we set limit min IET fragment size to 124 (excluding 4 bytes mCRC). [1] AM62x TRM - https://www.ti.com/lit/ug/spruiv7a/spruiv7a.pdf [2] AM62x Silicon Errata - https://www.ti.com/lit/er/sprz487c/sprz487c.pdf Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel modeGrygorii Strashko4-4/+278
This patch adds MQPRIO Qdisc offload in full 'channel' mode which allows not only setting up pri:tc mapping, but also configuring TX shapers (rate-limiting) on external port FIFOs. The MQPRIO Qdisc offload is expected to work with or without VLAN/priority tagged packets. The CPSW external Port FIFO has 8 Priority queues. The rate-limit can be set for each of these priority queues. Which Priority queue a packet is assigned to depends on PN_REG_TX_PRI_MAP register which maps header priority to switch priority. The header priority of a packet is assigned via the RX_PRI_MAP_REG which maps packet priority to header priority. The packet priority is either the VLAN priority (for VLAN tagged packets) or the thread/channel offset. For simplicity, we assign the same priority queue to all queues of a Traffic Class so it can be rate-limited correctly. Configuration example: ethtool -L eth1 tx 5 ethtool --set-priv-flags eth1 p0-rx-ptype-rrobin off tc qdisc add dev eth1 parent root handle 100: mqprio num_tc 3 \ map 0 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 hw 1 mode channel \ shaper bw_rlimit min_rate 0 100mbit 200mbit max_rate 0 101mbit 202mbit tc qdisc replace dev eth2 handle 100: parent root mqprio num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@0 hw 1 ip link add link eth1 name eth1.100 type vlan id 100 ip link set eth1.100 type vlan egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 In the above example two ports share the same TX CPPI queue 0 for low priority traffic. 3 traffic classes are defined for eth1 and mapped to: TC0 - low priority, TX CPPI queue 0 -> ext Port 1 fifo0, no rate limit TC1 - prio 2, TX CPPI queue 1 -> ext Port 1 fifo1, CIR=100Mbit/s, EIR=1Mbit/s TC2 - prio 3, TX CPPI queue 2 -> ext Port 1 fifo2, CIR=200Mbit/s, EIR=2Mbit/s Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: am65-cpsw: Move register definitions to header fileRoger Quadros2-35/+35
Move register definitions to header file. No functional change. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: ti: am65-cpsw: Move code to avoid forward declarationRoger Quadros1-43/+43
Move this code around to avoid forward declaration. No functional change. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: am65-cpsw: cleanup TAPRIO handlingRoger Quadros1-80/+71
Handle offloading commands using switch-case in am65_cpsw_setup_taprio(). Move checks to am65_cpsw_taprio_replace(). Use NL_SET_ERR_MSG_MOD for error messages. Change error message from "Failed to set cycle time extension" to "cycle time extension not supported" Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: am65-cpsw: Rename TI_AM65_CPSW_TAS to TI_AM65_CPSW_QOSRoger Quadros3-8/+8
We will use this Kconfig option to not only enable TAS/EST offload but also other QoS features like Multiqueue priority descriptors and MAC-Merge/Frame Preemption. TI_AM65_CPSW_QOS seems a more appropriate Kconfig option name than TI_AM65_CPSW_TAS. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23net: ethernet: am65-cpsw: Build am65-cpsw-qos only if requiredRoger Quadros3-13/+28
Build am65-cpsw-qos only if CONFIG_TI_AM65_CPSW_TAS is enabled. Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22octeontx2-af: Fix a double free issueSuman Ghosh1-1/+1
There was a memory leak during error handling in function npc_mcam_rsrcs_init(). Fixes: dd7842878633 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22Merge branch '1GbE' of ↵David S. Miller70-1016/+733
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== intel: use bitfield operations Jesse Brandeburg says: After repeatedly getting review comments on new patches, and sporadic patches to fix parts of our drivers, we should just convert the Intel code to use FIELD_PREP() and FIELD_GET(). It's then "common" in the code and hopefully future change-sets will see the context and do-the-right-thing. This conversion was done with a coccinelle script which is mentioned in the commit messages. Generally there were only a couple conversions that were "undone" after the automatic changes because they tried to convert a non-contiguous mask. Patch 1 is required at the beginning of this series to fix a "forever" issue in the e1000e driver that fails the compilation test after conversion because the shift / mask was out of range. The second patch just adds all the new #includes in one go. The patch titled: "ice: fix pre-shifted bit usage" is needed to allow the use of the FIELD_* macros and fix up the unexpected "shifts included" defines found while creating this series. The rest are the conversion to use FIELD_PREP()/FIELD_GET(), and the occasional leXX_{get,set,encode}_bits() call, as suggested by Alex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni36-196/+181
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21wifi: iwlwifi: replace ENOTSUPP with EOPNOTSUPPAndrei Otcheretianski5-12/+12
ENOTSUPP isn't a standard error code, don't use it. Replace with EOPNOTSUPP instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.a69f4347b5f8.I88429d5de8251287ec0b58ff26a588465b9049a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: use the new command to clear the internal bufferEmmanuel Grumbach3-0/+19
The firmware can allow to clear the internal debug buffer. This can be used to sanitize the data when requested to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.99aed3efbacb.Ib5bda1d1ff4bae476667737d4081ad066d1d7e6b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: disallow puncturing in US/CanadaJohannes Berg1-0/+10
For now, this isn't allowed. The API to mac80211 isn't great for this, but we need to change the API to move puncturing into the chanctx/chandef, and will do it better then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.38955b68b429.I0c4ae99179b271648a747a51eb04853504c7952c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: add US/Canada MCC to APIJohannes Berg2-5/+5
We don't want to duplicate the definitions later, so add them to the API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.6595e905997b.I12354d31676911b29ab30c81a4e9b87f59284d3b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: Add rf_mapping of new wifi7 devicesMukesh Sisodiya2-0/+12
Add the CSR register details for new wifi7 devices and correctly set rf_name for devices with FM and WP radios. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.a9c04b1e9d13.Ibf258d5e6370d8840a2560282988a1c26377c410@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: cleanup BT Shared Single Antenna codeMiri Korenblit2-19/+4
We don't support such device. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.6e6961ac0ac5.I923024eac20efd24a5b42332d8e73ae756e0469a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: assign phy_ctxt before eSR activationMiri Korenblit1-3/+3
eSR is activated when a chanctx is assigned to more than one link. During eSR activation we should disable RLC for both phys, and configure the FW with a special phy command for both phys. Currently we assign the phy_ctxt to the link only after eSR activation, so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW. Fix this by first assigning the new phy_ctxt to the link and then doing the eSR activation. Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: fix out of bound copy_from_userAnjaneyulu1-1/+1
The driver copies the userspace buffer into an internal NUL byte terminated buffer. While doing so, it was reading beyond the end of the userspace buffer, overwriting its own NUL termination in the process. Fix this by only copying the correct number of bytes. Fixes: 3f244876ef73 ("wifi: iwlwifi: make debugfs entries link specific") Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.e4913deb2ad4.Idcf6a7e909ff4b7801cd49c2f691f84a2f68eff9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Do not warn if valid link pair was not foundIlan Peer1-1/+1
It is possible that though multiple links are enabled we cannot enabled EMLSR enable more than a single link, e.g., all valid links are on the same band etc. Thus, do not warn in case no valid link pair is found. Fixes: b9be67fb4207 ("wifi: iwlwifi: mvm: Add basic link selection logic") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.142e57a05230.I7cfe78c94c3d15c4c744bccadd8f187e43594932@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: d3: avoid intermediate/early mutex unlockJohannes Berg1-15/+2
Now with the mac80211 locking model changed, we no longer can cause any bad dependencies here between mvm->mutex and other mutexes in mac80211, so we no longer need to drop the mutex early or even temporarily. Clean this up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.1f2f5289ecc6.I7e3b8e806b6d50e88ba0c26767da8261806eb9c7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: send TX path flush in rfkillJohannes Berg1-1/+1
If we want to drop packets, that's surely a good thing to do when we want to enter rfkill. Send this command despite rfkill so we can successfully clean up everything, we need to handle it separately since it has CMD_WANT_SKB, so it's not going to automatically return success when in rfkill. Fixes: d4e3a341b87b ("iwlwifi: mvm: add support for new flush queue response") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: Don't mark DFS channels as NO-IRAndrei Otcheretianski1-1/+6
The NVM_CHANNEL_ACTIVE bit means that active scanning/beaconing is allowed, however it's not an exact opposite of IEEE80211_CHAN_NO_IR. For example, NVM_CHANNEL_ACTIVE bit is not set on DFS channels, while cfg80211 doesn't really expect NO-IR on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.94cd9b96a532.Ifb0e8d8a6a6384493758f26b811d58432536101a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Allow DFS concurrent operationAndrei Otcheretianski2-4/+10
AX210 devices allow concurrent P2P operation on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.dc39b33bf507.I04dfda24d73091fb75701279d10ac400314de488@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: set siso/mimo chains to 1 in FW SMPS requestJohannes Berg1-11/+0
The firmware changed their mind, don't set the chains to zero, instead set them to 1 as we normally would for connections to APs that don't use MIMO. Fixes: 2a7ce54ccc23 ("iwlwifi: mvm: honour firmware SMPS requests") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: rework RX timestamp flagsJohannes Berg1-1/+1
We only have a single flag free, and before using that for another mactime flag, instead refactor the mactime flags to use a 2-bit field. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.d0e664832d14.I20c8900106f9bf81316bed778b1e3ce145785274@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211_hwsim: Add custom reg for DFS concurrentAndrei Otcheretianski1-0/+19
Add custom regulatory that marks DFS channels as DFS_CONCURRENT. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.4b08a6530fa3.Ic285ca7a4728e77a4bea1394a6a52cf286fbea22@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211_hwsim: support HE 40 MHz in 2.4 GHz bandMiri Korenblit1-0/+6
We are missing the flag that indicates that capability of 40 MHz bandwidth support in HE on the LB. Add it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20231220075830.4f10c6b64d1a.I1ba6905c806be6e0548ed15130c0bbb2ee04c9fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mwifiex: fix uninitialized firmware_statDavid Lin1-1/+1
Variable firmware_stat is possible to be used without initialization. Signed-off-by: David Lin <yu-hao.lin@nxp.com> Fixes: 1c5d463c0770 ("wifi: mwifiex: add extra delay for firmware ready") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202312192236.ZflaWYCw-lkp@intel.com/ Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231221015511.1032128-1-yu-hao.lin@nxp.com
2023-12-21wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift()Su Hui2-5/+5
Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift(). And fix an undefined bitwise shift behavior problem. Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-12-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8723_common: using calculate_bit_shift()Su Hui2-11/+2
Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 0a168b48cdf7 ("rtlwifi: rtl8723ae: rtl8723-common: Create new driver for common code") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-11-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192se: using calculate_bit_shift()Su Hui1-11/+4
Using calculate_bit_shift() to replace _rtl92s_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: d15853163bea ("rtlwifi: rtl8192se: Merge phy routines") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-10-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192ee: using calculate_bit_shift()Su Hui1-12/+4
Using calculate_bit_shift() to replace _rtl92ee_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: b1a3bfc97cd9 ("rtlwifi: rtl8192ee: Move driver from staging to the regular tree") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-9-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192de: using calculate_bit_shift()Su Hui1-11/+4
Using calculate_bit_shift() to replace _rtl92d_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-8-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192ce: using calculate_bit_shift()Su Hui2-4/+3
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-7-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192cu: using calculate_bit_shift()Su Hui1-3/+3
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix an undefined bitwise shift behavior problem. Fixes: f0a39ae738d6 ("rtlwifi: rtl8192cu: Add routine phy") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-6-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192c: using calculate_bit_shift()Su Hui2-11/+2
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 4295cd254af3 ("rtlwifi: Move common parts of rtl8192ce/phy.c") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-5-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8188ee: phy: using calculate_bit_shift()Su Hui1-10/+4
Using calculate_bit_shift() to replace _rtl88e_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: f0eb856e0b6c ("rtlwifi: rtl8188ee: Add new driver") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-4-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8821ae: phy: using calculate_bit_shift()Su Hui1-11/+4
using calculate_bit_shift() to replace _rtl8821ae_phy_calculate_bit_shift(). Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-3-suhui@nfschina.com
2023-12-21wifi: rtlwifi: add calculate_bit_shift()Su Hui1-0/+7
There are many same functions like _rtl88e_phy_calculate_bit_shift(), _rtl92c_phy_calculate_bit_shift() and so on. And these functions can cause undefined bitwise shift behavior. Add calculate_bit_shift() to replace them and fix undefined behavior in subsequent patches. Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-2-suhui@nfschina.com
2023-12-21net: phy: at803x: replace msleep(1) with usleep_rangeChristian Marangi1-3/+3
Replace msleep(1) with usleep_range as suggested by timers-howto guide. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231217232508.26470-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21net: phy: at803x: remove extra space after castChristian Marangi1-1/+1
Remove extra space after cast as reported by checkpatch to keep code clean. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231217232739.27065-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21Merge branch '100GbE' of ↵Paolo Abeni2-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-18 (ice) This series contains updates to ice driver only. Jakes stops clearing of needed aggregator information. Dave adds a check for LAG device support before initializing the associated event handler. Larysa restores accounting of XDP queues in TC configurations. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix PF with enabled XDP going no-carrier after reset ice: alter feature support check for SRIOV and LAG ice: stop trashing VF VSI aggregator node ID information ==================== Link: https://lore.kernel.org/r/20231218192708.3397702-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21net: ethernet: mtk_wed: fix possible NULL pointer dereference in ↵Lorenzo Bianconi1-0/+3
mtk_wed_wo_queue_tx_clean() In order to avoid a NULL pointer dereference, check entry->buf pointer before running skb_free_frag in mtk_wed_wo_queue_tx_clean routine. Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21net/mlx5: Implement management PF Ethernet profileArmen Ratner7-5/+304
Add management PF modules, which introduce support for the structures needed to create the resources for the MGMT PF to work. Also, add the necessary calls and functions to establish this functionality. Signed-off-by: Armen Ratner <armeng@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 05:41:23 +0300