| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e)
This series contains updates to iavf and i40e drivers.
Piotr adds checks for unsupported Flow Director rules on iavf.
Andrii replaces incorrect 'write' messaging on read operations for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
====================
Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-08-16
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
====================
Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes: 2950219d87b0 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
Fixes: 7e056e2360d9 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes: 5b2e12d51bd8 ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.
Fixes: 222dd185833e ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c594b ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Change "write" into the actual "read" word.
Change parameters description.
Fixes: 7073f46e443e ("i40e: Add AQ commands for NVM Update for X722")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Return an error if a field's mask is neither full nor empty. When a mask
is only partial the field is not being used for rule programming but it
gives a wrong impression it is used. Fix by returning an error on any
partial mask to make it clear they are not supported.
The ip_ver assignment is moved earlier in code to allow using it in
iavf_validate_fdir_fltr_masks.
Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters")
Fixes: e90cbc257a6f ("iavf: Support IPv6 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Return result of b44_writephy() instead of zero to
deal with possible error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to commit 01f4fd270870 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add team1 type team
# ip netns exec ns1 ip link add team_slave type veth peer veth2
# ip netns exec ns1 ip link set team_slave master team1
# ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set team_slave nomaster
# ip netns del ns1
Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.
Fixes: b14995ac2527 ("net: phy: broadcom: Add BCM54810 PHY entry")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Just a bunch of bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (26 commits)
virtio-mem: check if the config changed before fake offlining memory
virtio-mem: keep retrying on offline_and_remove_memory() errors in Sub Block Mode (SBM)
virtio-mem: convert most offline_and_remove_memory() errors to -EBUSY
virtio-mem: remove unsafe unplug in Big Block Mode (BBM)
pds_vdpa: fix up debugfs feature bit printing
pds_vdpa: alloc irq vectors on DRIVER_OK
pds_vdpa: clean and reset vqs entries
pds_vdpa: always allow offering VIRTIO_NET_F_MAC
pds_vdpa: reset to vdpa specified mac
virtio-net: Zero max_tx_vq field for VIRTIO_NET_CTRL_MQ_HASH_CONFIG case
vdpa/mlx5: Fix crash on shutdown for when no ndev exists
vdpa/mlx5: Delete control vq iotlb in destroy_mr only when necessary
vdpa/mlx5: Fix mr->initialized semantics
vdpa/mlx5: Correct default number of queues when MQ is on
virtio-vdpa: Fix cpumask memory leak in virtio_vdpa_find_vqs()
vduse: Use proper spinlock for IRQ injection
vdpa: Enable strict validation for netlinks ops
vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check
vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check
vdpa: Add features attr to vdpa_nl_policy for nlattr length check
...
|
|
The failure handling procedure destroys page pools for all queues,
including those that haven't had their page pool created yet. this patch
introduces necessary adjustments to prevent potential risks and
inconsistency with the error handling behavior.
Fixes: 0ebab78cbcbf ("net: veth: add page_pool for page recycling")
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Link: https://lore.kernel.org/r/20230812023016.10553-1-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.
Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.
Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task.
Fixes: 24d4333233b3 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
intr_poll_task may queue ctrl_mbox_task. The function
octep_poll_non_ioq_interrupts_cn93_pf does this.
When removing the driver and canceling these two works, cancel
ctrl_mbox_task last to guarantee it does not run anymore.
Fixes: 24d4333233b3 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-4-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tx_timeout_task is canceled too early when removing the driver. Nothing
prevents .ndo_tx_timeout from triggering and queuing the work again.
Better cancel it after the netdev is unregistered.
It's harmless for octep_tx_timeout_task to run in the window between the
unregistration and cancelation, because it checks netif_running.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The intention was to wait up to 500 ms for the mbox response.
The third argument to wait_event_interruptible_timeout() is supposed to
be the timeout duration. The driver mistakenly passed absolute time
instead.
Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.
This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.
$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
reset MACB IP and disables PHY and network interface.
2. macb_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into suspend state. Some time later, system is
waken up by RTC wakeup device;
4. macb_resume: It does nothing because network interface has
been disabled;
5. macb_open: It is called to enable network interface again. ethernet
interface is initialized in this API but serdes which is power-off
by PMUFW during FPD-off suspend is not initialized again and so
we hit GT PLL lock issue on open.
To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.
Fixes: f22bd29ba19a ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Uwe reports:
"Most PHYs signal WoL using an interrupt. So disabling interrupts [at
shutdown] breaks WoL at least on PHYs covered by the marvell driver."
Discussing with Ioana, the problem which was trying to be solved was:
"The board in question is a LS1021ATSN which has two AR8031 PHYs that
share an interrupt line. In case only one of the PHYs is probed and
there are pending interrupts on the PHY#2 an IRQ storm will happen
since there is no entity to clear the interrupt from PHY#2's registers.
PHY#1's driver will get stuck in .handle_interrupt() indefinitely."
Further confirmation that "the two AR8031 PHYs are on the same MDIO
bus."
With WoL using interrupts to wake the system, in such a case, the
system will begin booting with an asserted interrupt. Thus, we need to
cope with an interrupt asserted during boot.
Solve this instead by disabling interrupts during PHY probe. This will
ensure in Ioana's situation that both PHYs of the same type sharing an
interrupt line on a common MDIO bus will have their interrupt outputs
disabled when the driver probes the device, but before we hook in any
interrupt handlers - thus avoiding the interrupt storm.
A better fix would be for platform firmware to disable the interrupting
devices at source during boot, before control is handed to the kernel.
Fixes: e2f016cf7751 ("net: phy: add a shutdown procedure")
Link: 20230804071757.383971-1-u.kleine-koenig@pengutronix.de
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The reference of pdev->dev is taken by of_find_device_by_node, so
it should be released when not need anymore.
Fixes: 7dc54d3b8d91 ("net: pcs: add Renesas MII converter driver")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 25266128fe16 ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().
Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.
Fixes: 25266128fe16 ("virtio-net: fix race between set queues and probe")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Kernel uses `struct virtio_net_ctrl_rss` to save command-specific-data
for both the VIRTIO_NET_CTRL_MQ_HASH_CONFIG and
VIRTIO_NET_CTRL_MQ_RSS_CONFIG commands.
According to the VirtIO standard, "Field reserved MUST contain zeroes.
It is defined to make the structure to match the layout of
virtio_net_rss_config structure, defined in 5.1.6.5.7.".
Yet for the VIRTIO_NET_CTRL_MQ_HASH_CONFIG command case, the `max_tx_vq`
field in struct virtio_net_ctrl_rss, which corresponds to the
`reserved` field in struct virtio_net_hash_config, is not zeroed,
thereby violating the VirtIO standard.
This patch solves this problem by zeroing this field in
virtnet_init_default_rss().
Cc: Andrew Melnychenko <andrew@daynix.com>
Cc: stable@vger.kernel.org
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230810110405.25558-1-yin31149@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bpf.
Still trending up in size but the good news is that the "current"
regressions are resolved, AFAIK.
We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
handling on embedded this week (most not merged yet), not sure why.
But those are all for older bugs.
Current release - regressions:
- tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
over to TCP
Current release - new code bugs:
- eth: mlx5: correct IDs on VFs internal to the device (IPU)
Previous releases - regressions:
- phy: at803x: fix WoL support / reporting on AR8032
- bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
slaves, leading to BUG_ON()
- tun: prevent tun_build_skb() from exceeding the packet size limit
- wifi: rtw89: fix 8852AE disconnection caused by RX full flags
- eth/PCI: enetc: fix probing after 6fffbc7ae137 ("PCI: Honor
firmware's device disabled status"), keep PCI devices around even
if they are disabled / not going to be probed to be able to apply
quirks on them
- eth: prestera: fix handling IPv4 routes with nexthop IDs
Previous releases - always broken:
- netfilter: re-work garbage collection to avoid races between
user-facing API and timeouts
- tunnels: fix generating ipv4 PMTU error on non-linear skbs
- nexthop: fix infinite nexthop bucket dump when using maximum
nexthop ID
- wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
Misc:
- unix: use consistent error code in SO_PEERPIDFD
- ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
upcoming IETF RFC"
* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: hns3: fix strscpy causing content truncation issue
net: tls: set MSG_SPLICE_PAGES consistently
ibmvnic: Ensure login failure recovery is safe from other resets
ibmvnic: Do partial reset on login failure
ibmvnic: Handle DMA unmapping of login buffs in release functions
ibmvnic: Unmap DMA login rsp buffer on send login fail
ibmvnic: Enforce stronger sanity checks on login response
net: mana: Fix MANA VF unload when hardware is unresponsive
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: GC transaction API to avoid race with control plane
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
ipv6: adjust ndisc_is_useropt() to also return true for PIO
selftests: forwarding: bridge_mdb: Make test more robust
selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
...
|
|
hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.
strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.
One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:
Expected:
UC MAC_LIST:
FUNC_ID MAC_ADDR STATE
pf 00:2b:19:05:03:00 ACTIVE
The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.
Fixes: 1cf3d5567f27 ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
1. This will result in two parallel initialization processes, this can
cause serious issues during login.
2. It is possible that the failover CRQ is received but never executed.
We get notified of a pending failover through a transport event CRQ.
The reset is not performed until a INIT CRQ request is received.
Previously, if CRQ init fails during login recovery, then the ibmvnic
irq is freed and the login process returned error. If failover_pending
is true (a transport event was received), then the ibmvnic device
would never be able to process the reset since it cannot receive the
CRQ_INIT request due to the irq being freed. This leaved the device
in a inoperable state.
Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Perform a partial reset before sending a login request if any of the
following are true:
1. If a previous request times out. This can be dangerous because the
VIOS could still receive the old login request at any point after
the timeout. Therefore, it is best to re-register the CRQ's and
sub-CRQ's before retrying.
2. If the previous request returns an error that is not described in
PAPR. PAPR provides procedures if the login returns with partial
success or aborted return codes (section L.5.1) but other values
do not have a defined procedure. Previously, these conditions
just returned error from the login function rather than trying
to resolve the issue.
This can cause further issues since most callers of the login
function are not prepared to handle an error when logging in. This
improper cleanup can lead to the device being permanently DOWN'd.
For example, if the VIOS believes that the device is already logged
in then it will return INVALID_STATE (-7). If we never re-register
CRQ's then it will always think that the device is already logged
in. This leaves the device inoperable.
The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.
If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.
Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.
Fixes: c98d9cc4170d ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.
When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.
Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.
Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.
Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few small updates:
* fix an integer overflow in nl80211
* fix rtw89 8852AE disconnections
* fix a buffer overflow in ath12k
* fix AP_VLAN configuration lookups
* fix allocation failure handling in brcm80211
* update MAINTAINERS for some drivers
* tag 'wireless-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath12k: Fix buffer overflow when scanning with extraie
wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
wifi: cfg80211: fix sband iftype data lookup for AP_VLAN
wifi: rtw89: fix 8852AE disconnection caused by RX full flags
MAINTAINERS: Remove tree entry for rtl8180
MAINTAINERS: Update entry for rtl8187
wifi: brcm80211: handle params_v1 allocation failure
====================
Link: https://lore.kernel.org/r/20230809124818.167432-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If cfg80211 is providing extraie's for a scanning process then ath12k will
copy that over to the firmware. The extraie.len is a 32 bit value in struct
element_info and describes the amount of bytes for the vendor information
elements.
The problem is the allocation of the buffer. It has to align the TLV
sections by 4 bytes. But the code was using an u8 to store the newly
calculated length of this section (with alignment). And the new
calculated length was then used to allocate the skbuff. But the actual
code to copy in the data is using the extraie.len and not the calculated
"aligned" length.
The length of extraie with IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS enabled
was 264 bytes during tests with a wifi card. But it only allocated 8
bytes (264 bytes % 256) for it. As consequence, the code to memcpy the
extraie into the skb was then just overwriting data after skb->end. Things
like shinfo were therefore corrupted. This could usually be seen by a crash
in skb_zcopy_clear which tried to call a ubuf_info callback (using a bogus
address).
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230809081241.32765-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled
status"), this is redundant and does nothing, because enetc_pf_probe()
no longer even gets called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The workaround implemented in commit 3222b5b613db ("net: enetc:
initialize RFS/RSS memories for unused ports too") is no longer
effective after commit 6fffbc7ae137 ("PCI: Honor firmware's device
disabled status"). Thus, it has introduced a regression and we see AER
errors being reported again:
$ ip link set sw2p0 up && dhclient -i sw2p0 && ip addr show sw2p0
fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
fsl_enetc 0000:00:00.2 eno2: Link is Up - 2.5Gbps/Full - flow control rx/tx
mscc_felix 0000:00:00.5 swp2: configuring for fixed/sgmii link mode
mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control off
sja1105 spi2.2 sw2p0: configuring for phy/rgmii-id link mode
sja1105 spi2.2 sw2p0: Link is Up - 1Gbps/Full - flow control off
pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0
pcieport 0000:00:1f.0: AER: can't find device of ID0000
Rob's suggestion is to reimplement the enetc driver workaround as a
PCI fixup, and to modify the PCI core to run the fixups for all PCI
functions. This change handles the first part.
We refactor the common code in enetc_psi_create() and enetc_psi_destroy(),
and use the PCI fixup only for those functions for which enetc_pf_probe()
won't get called. This avoids some work being done twice for the PFs
which are enabled.
Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add fdir_fltr_lock locking in unprotected places.
The change in iavf_fdir_is_dup_fltr adds a spinlock around a loop which
iterates over all filters and looks for a duplicate. The filter can be
removed from list and freed from memory at the same time it's being
compared. All other places where filters are deleted are already
protected with spinlock.
The remaining changes protect adapter->fdir_active_fltr variable so now
all its uses are under a spinlock.
Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807205011.3129224-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Access to shared variables through hrtimer requires locking in order
to protect the variables because actions to write into these variables
(oper_gate_closed, admin_gate_closed, and qbv_transition) might potentially
occur simultaneously. This patch provides a locking mechanisms to avoid
such scenarios.
Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed")
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230807205129.3129346-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-08-07
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Add capability check for vnic counters
net/mlx5: Reload auxiliary devices in pci error handlers
net/mlx5: Skip clock update work when device is in error state
net/mlx5: LAG, Check correct bucket when modifying LAG
net/mlx5e: Unoffload post act rule when handling FIB events
net/mlx5: Fix devlink controller number for ECVF
net/mlx5: Allow 0 for total host VFs
net/mlx5: Return correct EC_VF function ID
net/mlx5: DR, Fix wrong allocation of modify hdr pattern
net/mlx5e: TC, Fix internal port memory leak
net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()
====================
Link: https://lore.kernel.org/r/20230807212607.50883-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When externel_lb and reset are executed together, a deadlock may
occur:
[ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds.
[ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008
[ 3147.248045] Workqueue: hclge hclge_service_task [hclge]
[ 3147.253957] Call trace:
[ 3147.257093] __switch_to+0x7c/0xbc
[ 3147.261183] __schedule+0x338/0x6f0
[ 3147.265357] schedule+0x50/0xe0
[ 3147.269185] schedule_preempt_disabled+0x18/0x24
[ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc
[ 3147.279880] __mutex_lock_slowpath+0x1c/0x30
[ 3147.284839] mutex_lock+0x50/0x60
[ 3147.288841] rtnl_lock+0x20/0x2c
[ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge]
[ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge]
[ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge]
[ 3147.309718] hclge_service_task+0x2c/0x70 [hclge]
[ 3147.315109] process_one_work+0x1d0/0x490
[ 3147.319805] worker_thread+0x158/0x3d0
[ 3147.324240] kthread+0x108/0x13c
[ 3147.328154] ret_from_fork+0x10/0x18
In externel_lb process, the hns3 driver call napi_disable()
first, then the reset happen, then the restore process of the
externel_lb will fail, and will not call napi_enable(). When
doing externel_lb again, napi_disable() will be double call,
cause a deadlock of rtnl_lock().
This patch use the HNS3_NIC_STATE_DOWN state to protect the
calling of napi_disable() and napi_enable() in externel_lb
process, just as the usage in ndo_stop() and ndo_start().
Fixes: 04b6ba143521 ("net: hns3: add support for external loopback test")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some configure flow of hns3 driver, for example, change mtu, it will
disable MAC through firmware before configuration. But firmware disables
MAC asynchronously. The rx traffic may be not stopped in this case.
So fixes it by waiting until mac link is down.
Fixes: a9775bb64aa7 ("net: hns3: fix set and get link ksettings issue")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some nic configurations could only be performed after link is down. So this
patch refactor this API for reuse.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Restore the mac pause state to user configuration when autoneg is disabled
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RX full flags are raised if certain types of RX FIFO are full, and then
drop all following MPDU of AMPDU. In order to resume to receive MPDU
when RX FIFO becomes available, we clear the register bits by the
commit a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC"). But, 8852AE
needs more settings to support this. To quickly fix disconnection problem,
revert the behavior as before.
Fixes: a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC")
Reported-by: Damian B <bronecki.damian@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217710
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Damian B <bronecki.damian@gmail.com>
Link: https://lore.kernel.org/r/20230808005426.5327-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Return -ENOMEM from brcmf_run_escan() if kzalloc() fails for v1 params.
Fixes: 398ce273d6b1 ("wifi: brcmfmac: cfg80211: Add support for scan params v2")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Link: https://lore.kernel.org/r/20230802163430.1656-1-petrtesarik@huaweicloud.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix handling IPv4 routes referencing a nexthop via its id by replacing
calls to fib_info_nh() with fib_info_nhc().
Trying to add an IPv4 route referencing a nextop via nhid:
$ ip link set up swp5
$ ip a a 10.0.0.1/24 dev swp5
$ ip nexthop add dev swp5 id 20 via 10.0.0.2
$ ip route add 10.0.1.0/24 nhid 20
triggers warnings when trying to handle the route:
[ 528.805763] ------------[ cut here ]------------
[ 528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[ 528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G O 6.4.5 #1
[ 528.845178] Hardware name: delta,tn48m-dn (DT)
[ 528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[ 528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera]
[ 528.876007] sp : ffff80000b20bc90
[ 528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48
[ 528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[ 528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200
[ 528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059
[ 528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[ 528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[ 528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020
[ 528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86
[ 528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc
[ 528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[ 528.951058] Call trace:
[ 528.953516] __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.958952] __prestera_router_fib_event_work+0x100/0x158 [prestera]
[ 528.965348] process_one_work+0x208/0x488
[ 528.969387] worker_thread+0x4c/0x430
[ 528.973068] kthread+0x120/0x138
[ 528.976313] ret_from_fork+0x10/0x20
[ 528.979909] ---[ end trace 0000000000000000 ]---
[ 528.984998] ------------[ cut here ]------------
[ 528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[ 529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G W O 6.4.5 #1
[ 529.024368] Hardware name: delta,tn48m-dn (DT)
[ 529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[ 529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera]
[ 529.055452] sp : ffff80000b20bc60
[ 529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48
[ 529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[ 529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0
[ 529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059
[ 529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[ 529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[ 529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80
[ 529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018
[ 529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557
[ 529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[ 529.130501] Call trace:
[ 529.132958] __prestera_fi_is_direct+0x2c/0x68 [prestera]
[ 529.138394] prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera]
[ 529.143918] __prestera_router_fib_event_work+0x100/0x158 [prestera]
[ 529.150313] process_one_work+0x208/0x488
[ 529.154348] worker_thread+0x4c/0x430
[ 529.158030] kthread+0x120/0x138
[ 529.161274] ret_from_fork+0x10/0x20
[ 529.164867] ---[ end trace 0000000000000000 ]---
and results in a non offloaded route:
$ ip route
10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap
When creating a route referencing a nexthop via its ID, the nexthop will
be stored in a separate nh pointer instead of the array of nexthops in
the fib_info struct. This causes issues since fib_info_nh() only handles
the nexthops array, but not the separate nh pointer, and will loudly
WARN about it.
In contrast fib_info_nhc() handles both, but returns a fib_nh_common
pointer instead of a fib_nh pointer. Luckily we only ever access fields
from the fib_nh_common parts, so we can just replace all instances of
fib_info_nh() with fib_info_nhc() and access the fields via their
fib_nh_common names.
This allows handling IPv4 routes with an external nexthop, and they now
get offloaded as expected:
$ ip route
10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload
Fixes: 396b80cb5cc8 ("net: marvell: prestera: Add neighbour cache accounting")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20230804101220.247515-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using the syzkaller repro with reduced packet size it was discovered
that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(),
although pad may be incremented in tun_build_skb(). This may end up
with exceeding the PAGE_SIZE limit in tun_build_skb().
Jason Wang <jasowang@redhat.com> proposed to count XDP_PACKET_HEADROOM
always (e.g. without rcu_access_pointer(tun->xdp_prog)) in
tun_can_build_skb() since there's a window during which XDP program
might be attached between tun_can_build_skb() and tun_build_skb().
Fixes: 7df13219d757 ("tun: reserve extra headroom only when XDP is set")
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Link: https://lore.kernel.org/r/20230803185947.2379988-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen netback buffer overflow fix from Juergen Gross:
"The fix for XSA-423 added logic to Linux'es netback driver to deal
with a frontend splitting a packet in a way such that not all of the
headers would come in one piece.
Unfortunately the logic introduced there didn't account for the
extreme case of the entire packet being split into as many pieces as
permitted by the protocol, yet still being smaller than the area
that's specially dealt with to keep all (possible) headers together.
Such an unusual packet would therefore trigger a buffer overrun in the
driver"
* tag 'xsa432-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netback: Fix buffer overrun triggered by unusual packet
|
