summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-06-19wifi: iwlwifi: bump FW API to 81 for AX devicesGregory Greenman1-2/+2
Start supporting API version 81 for AX devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230615094410.e61fdc474d89.I3d9823231fa7fc47158b8aa3561b43822c8c86cd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: Add support for SCAN API version 16Ilan Peer2-21/+48
Scan API version 16 use link ID for reporting the TSF of scan results (instead of MAC ID used in previous versions). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230615094410.05bf3e612297.Ie3075f7068af38c335d26778ab7d0ec4b1c026c3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: Don't access vif valid links directlyIlan Peer3-4/+4
And instead use the vif getter functions, as a preparation for supporting disabled/dormant links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230615094410.61ca688cbbf1.Ic1b4049cf156238ff16e6c57959004da911cb5c8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: handle eSR transitionsMiri Korenblit5-33/+155
There several transitions to handle in eSR mode: * SMPS should be disabled when in eSR mode * indicate to the fw whether the new added link should use the listen lmac or the main lmac * RLC is offloaded when in eSR mode; adjust RLC command accordingly Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: fix max number of fw active linksMiri Korenblit3-22/+24
The max active links that are supported by the FW is hard coded. This is wrong since this value is HW-dependent. Fix this by determining according to the actual HW. Also remove a redundant check that the number of active links doesn't exceeds the maximum. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: add a few rate index validity checksAnjaneyulu2-7/+13
Validate index before access iwl_rate_mcs to keep rate->index inside the valid boundaries. Use MCS_0_INDEX if index is less than MCS_0_INDEX and MCS_9_INDEX if index is greater then MCS_9_INDEX. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.79f16b3aef32.If1137f894775d6d07b78cbf3a6163ffce6399507@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: Validate slots_num before allocating memoryAnjaneyulu1-1/+4
Verify slots_num is valid in iwl_txq_alloc() Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.90be48017c1b.I880e451e137c5cd688d5f38b573b0dbf352762b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: Validate tid is in valid range before using itAnjaneyulu2-6/+13
Validate tid is less then MAX TID when it is used to access corresponding arrays. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.cea75e1f57e7.I03bc0a81d2c1bdbf4784c12c4c62b8538892ccba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: track u-APSD misbehaving AP by AP addressJohannes Berg3-17/+26
If the AP is an AP MLD, then we shouldn't track just the BSSID but the MLD address. Just generally use ap_addr since it has the BSSID in the non-MLD case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.b6a4f7edd10c.Ie5a8029ed686b9441620ba06596d430432f65559@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: implement WPFC ACPI table loadingJohannes Berg6-51/+65
We skipped this in the past, but now we will need it for some platforms. Implement loading the PHY filter configuration IDs from the WPFC ACPI table. Note that the firmware must also be aware of the right filter configuration IDs (they're just the IDs of a filter configuration, not the actual configuration). Remove the useless hardcoded zeroes while at it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123447.035026ea3169.I3a1fc1fe644fefa0d818ee1926c5fc331d68e8a3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: pcie: fix NULL pointer dereference in ↵Anjaneyulu1-2/+3
iwl_pcie_irq_rx_msix_handler() rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry is zero. For the case when entry->entry is not equal to 0, rxq won't be NULL even if trans_pcie->rxq is NULL. Modify checker to check for trans_pcie->rxq. Fixes: abc599efa67b ("iwlwifi: pcie: don't crash when rx queues aren't allocated in interrupt") Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.5a5eb3889a4a.I375a1d58f16b48cd2044e7b7caddae512d7c86fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: add some FW misbehaviour check infrastructureJohannes Berg4-9/+36
When the firmware misbehaves (according to the driver), we often either ignore that, or WARN_ON, which is very noisy but doesn't really help. Add a little helper macro IWL_FW_CHECK() that can be used in place of WARN_ON() in conditions, and make it take a message that's printed in this case. We can also add more behaviour to this in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.2e12ac670cea.Ia0198036b7a626876d836bd41a4b2d2b1e65c5ca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: always send spec link ID in link commandsJohannes Berg1-0/+2
The firmware technically only needs this when the link is newly added, but it's much easier for debugging if it's always available, so include it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: use array as array argumentJohannes Berg2-2/+2
When calling iwl_mvm_set_fw_qos_params() we explicitly pass a pointer to the first array element, but the function will treat it as an array. Simplify and clarify the code and pass the array instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: store WMM params per linkJohannes Berg2-6/+15
We have the data structure set up to store the parameters per link, but weren't using them. Fix that and store them in the right link. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.332c4949a1be.Icae03975d578b0cc82279911a1ea7cbc313046d6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: check link during TXJohannes Berg1-1/+3
Again, during some (botched) FW restart scenarios we can end up with a NULL link in the driver but mac80211 thinking all is still going OK. If we try to TX at the same time, we can crash there. Fix that by checking for a NULL link during TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.cee48479deec.I4eef58f7b67afafb7b3294adbeb6e0067b68419d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: add a NULL pointer checkJohannes Berg2-2/+12
We've observed that in some botched firmware restart scenarios when the firmware crashes again while we're reconfiguring, we can hit NULL pointer crashes here. The underlying issue is the botched restart which we need to fix separately, but until we can do that, don't crash hard here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.e47b0192c78f.I67fa9f07cd1c8b3bdc8db25f5e31c1c680c49745@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: fw: Add new FSEQ defines to fw dumpAriel Malamud2-2/+10
On fw error dump, dmesg prints FSEQ register data. Add 4 additional prints in order to match those being dumped by Windows driver. Allows fw infra to correctly detect version mismatch. Signed-off-by: Ariel Malamud <ariel.malamud@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.f40dc9c810a8.I26227900d0b7e9a71fefe5cbf57cf6b46ee44413@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: pcie: double-check ACK interrupt after timeoutJohannes Berg1-4/+9
There are evidently cases where the firmware completes the reset but the interrupt isn't received correctly, so check for the interrupt again after the timeout, and don't dump the firmware error log if the right bit is set. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.00cc2d9b88c3.I429bfe800f17c624e50c0b0c10dd2cd7d885f199@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: pull from TXQs with softirqs disabledJohannes Berg1-1/+4
In mac80211, it's required that we pull from TXQs by calling ieee80211_tx_dequeue() only with softirqs disabled. However, in iwl_mvm_queue_state_change() we're often called with them enabled, e.g. from flush if anything was flushed, triggering a mac80211 warning. Fix that by disabling the softirqs across the TX call. Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.0feef7fa81db.I4dd62542d955b40dd8f0af34fa4accb9d0d17c7e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: use iwl_mvm_is_vendor_in_approved_list()Johannes Berg1-1/+1
We have this helper now instead of open-coding the check for the dmi_tas_approved_list, so use it even here. It was added for debugfs use, but it's better to be consistent. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.f3741f5cdef4.I5e0bf522189dc595ee38d05e93994211d32ec0f4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: fw: make some ACPI functions staticJohannes Berg2-40/+19
iwl_acpi_get_wifi_pkg_range(), iwl_acpi_get_wifi_pkg() and iwl_acpi_get_object() need not be exported etc., they're used only within the same file. Make them static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.e866032e4106.Ifede7f7c25b17a8215b154ce01da513b75384325@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: Correctly indicate support for VHT TX STBCIlan Peer1-2/+2
If HT STBC is not supported, do not indicate support for VHT TX STBC. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.b24b5fba6fab.I116617875eb4a9d520df23a8c49a6594f9d8b2c6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: correctly access HE/EHT sband capaJohannes Berg1-20/+26
We can't just dereference the sband->iftype_data pointer, that's an array so we need to access the right entry. Use the previously introduced helper functions to do that. There are also cases, e.g. when loading with disable_11ax=1, where the pointer might be NULL but we still attempt to use it, causing a crash. Fixes: 529281bdf0fc ("iwlwifi: mvm: limit TLC according to our HE capabilities") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.a1f2b17ee39b.I8808120be744be8804815ce9e3e24ce6d2b424e3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: Add NULL check before dereferencing the pointerMukesh Sisodiya1-6/+8
While vif pointers are protected by the corresponding "*active" fields, static checkers can get confused sometimes. Add an explicit check. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614154951.78749ae91fb5.Id3c05d13eeee6638f0930f750e93fb928d5c9dee@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: remove new checksum codeJohannes Berg4-84/+7
The hardware isn't going to get fixed, so this mode cannot work in the foreseeable future. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614145722.ddbc16c4affe.Ia6921e4b8a9624d4f57489ac775105ed0e400313@changeid [restore original subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19Merge wireless into wireless-nextJohannes Berg1-6/+6
There are some locking changes that will later otherwise cause conflicts, so merge wireless into wireless-next to avoid those. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19Merge tag 'mlx5-fixes-2023-06-16' of ↵David S. Miller15-36/+163
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2023-06-16 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-19net: qca_spi: Avoid high load if QCA7000 is not availableStefan Wahren1-2/+1
In case the QCA7000 is not available via SPI (e.g. in reset), the driver will cause a high load. The reason for this is that the synchronization is never finished and schedule() is never called. Since the synchronization is not timing critical, it's safe to drop this from the scheduling condition. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18Merge tag 'mlx5-updates-2023-06-16' of ↵David S. Miller30-163/+415
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-updates-2023-06-16 1) Added a new event handler to firmware sync reset, which is used to support firmware sync reset flow on smart NIC. Adding this new stage to the flow enables the firmware to ensure host PFs unload before ECPFs unload, to avoid race of PFs recovery. 2) Debugfs for mlx5 eswitch bridge offloads 3) Added two new counters for vport stats 4) Minor Fixups and cleanups for net-next branch Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18net: phy: at803x: Use devm_regulator_get_enable_optional()Christophe JAILLET1-37/+7
Use devm_regulator_get_enable_optional() instead of hand writing it. It saves some line of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18net: phy: Manual remove LEDs to ensure correct orderingAndrew Lunn1-1/+14
If the core is left to remove the LEDs via devm_, it is performed too late, after the PHY driver is removed from the PHY. This results in dereferencing a NULL pointer when the LED core tries to turn the LED off before destroying the LED. Manually unregister the LEDs at a safe point in phy_remove. Cc: stable@vger.kernel.org Reported-by: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-18ieee802154/adf7242: Add MODULE_FIRMWARE macroJuerg Haefliger1-0/+2
The module loads firmware so add a MODULE_FIRMWARE macro to provide that information via modinfo. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-17sfc: use budget for TX completionsÍñigo Huguet6-13/+31
When running workloads heavy unbalanced towards TX (high TX, low RX traffic), sfc driver can retain the CPU during too long times. Although in many cases this is not enough to be visible, it can affect performance and system responsiveness. A way to reproduce it is to use a debug kernel and run some parallel netperf TX tests. In some systems, this will lead to this message being logged: kernel:watchdog: BUG: soft lockup - CPU#12 stuck for 22s! The reason is that sfc driver doesn't account any NAPI budget for the TX completion events work. With high-TX/low-RX traffic, this makes that the CPU is held for long time for NAPI poll. Documentations says "drivers can process completions for any number of Tx packets but should only process up to budget number of Rx packets". However, many drivers do limit the amount of TX completions that they process in a single NAPI poll. In the same way, this patch adds a limit for the TX work in sfc. With the patch applied, the watchdog warning never appears. Tested with netperf in different combinations: single process / parallel processes, TCP / UDP and different sizes of UDP messages. Repeated the tests before and after the patch, without any noticeable difference in network or CPU performance. Test hardware: Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz (4 cores, 2 threads/core) Solarflare Communications XtremeScale X2522-25G Network Adapter Fixes: 5227ecccea2d ("sfc: remove tx and MCDI handling from NAPI budget consideration") Fixes: d19a53721863 ("sfc_ef100: TX path for EF100 NICs") Reported-by: Fei Liu <feliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230615084929.10506-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-16net/mlx5e: Fix scheduling of IPsec ASO query while in atomicLeon Romanovsky1-1/+2
ASO query can be scheduled in atomic context as such it can't use usleep. Use udelay as recommended in Documentation/timers/timers-howto.rst. Fixes: 76e463f6508b ("net/mlx5e: Overcome slow response for first IPsec ASO WQE") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5e: Drop XFRM state lock when modifying flow steeringLeon Romanovsky1-5/+8
XFRM state which is changed to be XFRM_STATE_EXPIRED doesn't really need to hold lock while modifying flow steering rules to drop traffic. That state can be deleted only and as such mlx5e_ipsec_handle_tx_limit() work will be canceled anyway and won't run in parallel. Fixes: b2f7b01d36a9 ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5e: Fix ESN update kernel panicPatrisious Haddad1-2/+12
Previously during mlx5e_ipsec_handle_event the driver tried to execute an operation that could sleep, while holding a spinlock, which caused the kernel panic mentioned below. Move the function call that can sleep outside of the spinlock context. Call Trace: <TASK> dump_stack_lvl+0x49/0x6c __schedule_bug.cold+0x42/0x4e schedule_debug.constprop.0+0xe0/0x118 __schedule+0x59/0x58a ? __mod_timer+0x2a1/0x3ef schedule+0x5e/0xd4 schedule_timeout+0x99/0x164 ? __pfx_process_timeout+0x10/0x10 __wait_for_common+0x90/0x1da ? __pfx_schedule_timeout+0x10/0x10 wait_func+0x34/0x142 [mlx5_core] mlx5_cmd_invoke+0x1f3/0x313 [mlx5_core] cmd_exec+0x1fe/0x325 [mlx5_core] mlx5_cmd_do+0x22/0x50 [mlx5_core] mlx5_cmd_exec+0x1c/0x40 [mlx5_core] mlx5_modify_ipsec_obj+0xb2/0x17f [mlx5_core] mlx5e_ipsec_update_esn_state+0x69/0xf0 [mlx5_core] ? wake_affine+0x62/0x1f8 mlx5e_ipsec_handle_event+0xb1/0xc0 [mlx5_core] process_one_work+0x1e2/0x3e6 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x54/0x3ad ? __pfx_worker_thread+0x10/0x10 kthread+0xda/0x101 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x37 </TASK> BUG: workqueue leaked lock or atomic: kworker/u256:4/0x7fffffff/189754#012 last function: mlx5e_ipsec_handle_event [mlx5_core] CPU: 66 PID: 189754 Comm: kworker/u256:4 Kdump: loaded Tainted: G W 6.2.0-2596.20230309201517_5.el8uek.rc1.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X9-2/ASMMBX9-2, BIOS 61070300 08/17/2022 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_event [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x49/0x6c process_one_work.cold+0x2b/0x3c ? __pfx_worker_thread+0x10/0x10 worker_thread+0x54/0x3ad ? __pfx_worker_thread+0x10/0x10 kthread+0xda/0x101 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x37 </TASK> BUG: scheduling while atomic: kworker/u256:4/189754/0x00000000 Fixes: cee137a63431 ("net/mlx5e: Handle ESN update events") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5e: Don't delay release of hardware objectsLeon Romanovsky1-1/+8
XFRM core provides two callbacks to release resources, one is .xdo_dev_policy_delete() and another is .xdo_dev_policy_free(). This separation allows delayed release so "ip xfrm policy free" commands won't starve. Unfortunately, mlx5 command interface can't run in .xdo_dev_policy_free() callbacks as the latter runs in ATOMIC context. BUG: scheduling while atomic: swapper/7/0/0x00000100 Modules linked in: act_mirred act_tunnel_key cls_flower sch_ingress vxlan mlx5_vdpa vringh vhost_iotlb vdpa rpcrdma rdma_ucm ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.3.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x33/0x50 __schedule_bug+0x4e/0x60 __schedule+0x5d5/0x780 ? __mod_timer+0x286/0x3d0 schedule+0x50/0x90 schedule_timeout+0x7c/0xf0 ? __bpf_trace_tick_stop+0x10/0x10 __wait_for_common+0x88/0x190 ? usleep_range_state+0x90/0x90 cmd_exec+0x42e/0xb40 [mlx5_core] mlx5_cmd_do+0x1e/0x40 [mlx5_core] mlx5_cmd_exec+0x18/0x30 [mlx5_core] mlx5_cmd_delete_fte+0xa8/0xd0 [mlx5_core] del_hw_fte+0x60/0x120 [mlx5_core] mlx5_del_flow_rules+0xec/0x270 [mlx5_core] ? default_send_IPI_single_phys+0x26/0x30 mlx5e_accel_ipsec_fs_del_pol+0x1a/0x60 [mlx5_core] mlx5e_xfrm_free_policy+0x15/0x20 [mlx5_core] xfrm_policy_destroy+0x5a/0xb0 xfrm4_dst_destroy+0x7b/0x100 dst_destroy+0x37/0x120 rcu_core+0x2d6/0x540 __do_softirq+0xcd/0x273 irq_exit_rcu+0x82/0xb0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:default_idle+0x13/0x20 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 7a 4d ee 00 85 c0 7e 07 0f 00 2d 2f 98 2e 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 40 b4 02 00 RSP: 0018:ffff888100843ee0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffff888100812b00 RCX: 4000000000000000 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000002d2ec RBP: 0000000000000007 R08: 00000021daeded59 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000f R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 default_idle_call+0x30/0xb0 do_idle+0x1c1/0x1d0 cpu_startup_entry+0x19/0x20 start_secondary+0xfe/0x120 secondary_startup_64_no_verify+0xf3/0xfb </TASK> bad: scheduling from the idle thread! Fixes: a5b8ca9471d3 ("net/mlx5e: Add XFRM policy offload logic") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5: Free IRQ rmap and notifier on kernel shutdownSaeed Mahameed1-4/+21
The kernel IRQ system needs the irq affinity notifier to be clear before attempting to free the irq, see WARN_ON log below. On a normal driver unload we don't have this issue since we do the complete cleanup of the irq resources. To fix this, put the important resources cleanup in a helper function and use it in both normal driver unload and shutdown flows. [ 4497.498434] ------------[ cut here ]------------ [ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340 [ 4497.499193] Modules linked in: [ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.4.0-rc4+ #10 [ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 [ 4497.500518] Workqueue: events do_poweroff [ 4497.500849] RIP: 0010:free_irq+0x295/0x340 [ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008 [ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282 [ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000 [ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023 [ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260 [ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000 [ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600 [ 4497.504804] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 4497.505302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0 [ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4497.507002] Call Trace: [ 4497.507158] <TASK> [ 4497.507299] ? free_irq+0x295/0x340 [ 4497.507522] ? __warn+0x7c/0x130 [ 4497.507740] ? free_irq+0x295/0x340 [ 4497.507963] ? report_bug+0x171/0x1a0 [ 4497.508197] ? handle_bug+0x3c/0x70 [ 4497.508417] ? exc_invalid_op+0x17/0x70 [ 4497.508662] ? asm_exc_invalid_op+0x1a/0x20 [ 4497.508926] ? free_irq+0x295/0x340 [ 4497.509146] mlx5_irq_pool_free_irqs+0x48/0x90 [ 4497.509421] mlx5_irq_table_free_irqs+0x38/0x50 [ 4497.509714] mlx5_core_eq_free_irqs+0x27/0x40 [ 4497.509984] shutdown+0x7b/0x100 [ 4497.510184] pci_device_shutdown+0x30/0x60 [ 4497.510440] device_shutdown+0x14d/0x240 [ 4497.510698] kernel_power_off+0x30/0x70 [ 4497.510938] process_one_work+0x1e6/0x3e0 [ 4497.511183] worker_thread+0x49/0x3b0 [ 4497.511407] ? __pfx_worker_thread+0x10/0x10 [ 4497.511679] kthread+0xe0/0x110 [ 4497.511879] ? __pfx_kthread+0x10/0x10 [ 4497.512114] ret_from_fork+0x29/0x50 [ 4497.512342] </TASK> Fixes: 9c2d08010963 ("net/mlx5: Free irqs only on shutdown callback") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com>
2023-06-16net/mlx5: DR, Fix wrong action data allocation in decap actionYevgeny Kliteynik1-1/+7
When TUNNEL_L3_TO_L2 decap action was created, a pointer to a local variable was passed as its HW action data, resulting in attempt to free invalid address: BUG: KASAN: invalid-free in mlx5dr_action_destroy+0x318/0x410 [mlx5_core] Fixes: 4781df92f4da ("net/mlx5: DR, Move STEv0 modify header logic") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5: DR, Support SW created encap actions for FW tableYevgeny Kliteynik6-15/+83
In some cases, steering might need to use SW-created action in FW table, which results in wrong packet reformat being used: mlx5_core 0000:81:00.1: mlx5_cmd_check:756:(pid 1154): SET_FLOW_TABLE_ENTRY(0×936) op_mod(0×0) failed, status bad resource(0×5), syndrome (0xf2ff71) This patch adds support for usage of SW-created packet reformat (encap) actions in FW tables, and adds clear error flow for attempt to use SW-created modify header on FW tables. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5e: TC, Cleanup ct resources for nic flowChris Mi1-0/+1
The cited commit removes special handling of CT action. But it removes too much. Pre ct/ct_nat tables and some other resources are not destroyed due to the cited commit. Fix it by adding it back. Fixes: 08fe94ec5f77 ("net/mlx5e: TC, Remove special handling of CT action") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5e: TC, Add null pointer check for hardware miss supportChris Mi1-0/+2
The cited commits add hardware miss support to tc action. But if the rules can't be offloaded, the pointers are null and system will panic when accessing them. Fix it by checking null pointer. Fixes: 08fe94ec5f77 ("net/mlx5e: TC, Remove special handling of CT action") Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5: Fix driver load with single msix vectorEli Cohen1-1/+7
When a PCI device has just one msix vector available, we want to share this vector between async and completion events. Current code fails to do that assuming it will always have at least one dedicated vector for completion events. Fix this by detecting when the pool contains just a single vector. Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5e: xsk: Set napi_id to support busy polling on XSK RQMaxim Mikityanskiy1-1/+1
The cited commit missed setting napi_id on XSK RQs, it only affected regular RQs. Add the missing part to support socket busy polling on XSK RQs. Fixes: a2740f529da2 ("net/mlx5e: xsk: Set napi_id to support busy polling") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5e: XDP, Allow growing tail for XDP multi bufferMaxim Mikityanskiy3-5/+11
The cited commits missed passing frag_size to __xdp_rxq_info_reg, which is required by bpf_xdp_adjust_tail to support growing the tail pointer in fragmented packets. Pass the missing parameter when the current RQ mode allows XDP multi buffer. Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ") Fixes: 9cb9482ef10e ("net/mlx5e: Use fragments of the same size in non-linear legacy RQ with XDP") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Cc: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5: Remove unused ecpu field from struct mlx5_sf_tableJiri Pirko1-1/+0
"ecpu" field in struct mlx5_sf_table is not used anywhere. Remove it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5: Add header file for eventsJuhee Kang7-38/+45
Separate the event API defined in the generic mlx5.h header into a dedicated header. And remove the TODO comment in commit 69c1280b1f3b ("net/mlx5: Device events, Use async events chain"). Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5: DR, update query of HCA caps for EC VFsDaniel Jurgens3-7/+10
This change is needed to use EC VFs with metadata based steering. There was an assumption that vport was equal to function ID. That's not the case for EC VF functions. Adjust to function ID and set the ec_vf_function bit accordingly. Fixes: 9ac0b128248e ("net/mlx5: Update vport caps query/set for EC VFs") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-16net/mlx5: Fix the macro for accessing EC VF vportsDaniel Jurgens1-0/+1
The last value is not set correctly. This results in representors not being created for all EC VFs when the base value is higher than 0. Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 17:47:44 +0300