summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2012-06-03fec_mpc52xx: fix timestamp filteringStephan Gatzka1-1/+1
skb_defer_rx_timestamp was called with a freshly allocated skb but must be called with rskb instead. Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Cc: stable <stable@vger.kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-03mcs7830: Implement link state detectionOndrej Zary1-2/+23
Add .status callback that detects link state changes. Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver). Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-02e1000e: fix Rapid Start Technology support for i217Bruce Allan1-9/+9
The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY register greater than the maximum allowed by the latter macro, and fix a typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan. Also for clarity, rename a few defines as bit definitions instead of masks. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-02e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()Sebastian Andrzej Siewior1-1/+1
This is another fixup where the data is not transfered into buffer addressed by skb->data but into a page. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-02r8169: call netif_napi_del at errpaths and at driver unloadDevendra Naga1-0/+3
when register_netdev fails, the init'ed NAPIs by netif_napi_add must be deleted with netif_napi_del, and also when driver unloads, it should delete the NAPI before unregistering netdevice using unregister_netdev. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-018139cp/8139too: terminate the eeprom access with the right opmodeJason Wang2-2/+2
Currently, we terminate the eeprom access through clearing the CS by: RTL_W8 (Cfg9346, ~EE_CS); or writeb (~EE_CS, ee_addr); This would left the eeprom into "Config. Register Write Enable:" state which is not expcted as the highest two bits were set to 0x11 ( expected is the "Normal" mode (0x00)). Solving this by write 0x0 instead of ~EE_CS when terminating the eeprom access. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-018139cp: set ring address before enabling receiverJason Wang1-11/+11
Currently, we enable the receiver before setting the ring address which could lead the card DMA into unexpected areas. Solving this by set the ring address before enabling the receiver. btw. I find and test this in qemu as I didn't have a 8139cp card in hand. please review it carefully. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAPJack Morgenstein1-3/+2
The "!mlx4_is_slave" is totally confusing. Fix with constant MLX4_CMD_NATIVE, which is the intended behavior. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01net/mlx4_core: Check port out-of-range before using in mlx4_slave_capJack Morgenstein1-3/+3
The range check was performed after using the port number. Reverse this to prevent a potential array overflow. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01net/mlx4_core: Fixes for VF / Guest startup flowJack Morgenstein4-14/+63
- pass the following parameters: - firmware version (added QUERY_FW paravirtualization for that) - disable Blueflame on slaves. KVM disables write combining on guests, and we get better performance without BF in this case. (This requires QUERY_DEV_CAP paravirtualization, also in this commit) - max qp rdma as destination - get rid of a chunk of "if (0)" dead code Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_eventJack Morgenstein1-5/+7
Port is used as an array index before we know if that is proper. For example, in the catas event case, port is zero; however, the port index should lie in the range (1..2). Fix this by using 'port' only in the events where it is of interest. Test for port out of range in the default (unhandled event) case, and do not output a message if it is not an ethernet port. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01net/mlx4_core: Fix number of EQs used in ICM initialisationMarcel Apfelbaum2-15/+11
In SRIOV mode, the number of EQs used when computing the total ICM size was incorrect. To fix this, we do the following: 1. We add a new structure to mlx4_dev, mlx4_phys_caps, to contain physical HCA capabilities. The PPF uses the phys capabilities when it computes things like ICM size. The dev_caps structure will then contain the paravirtualized values, making bookkeeping much easier in SRIOV mode. We add a structure rather than a single parameter because there will be other fields in the phys_caps. The first field we add to the mlx4_phys_caps structure is num_phys_eqs. 2. In INIT_HCA, when running in SRIOV mode, the "log_num_eqs" parameter passed to the FW is the number of EQs per VF/PF; each function (PF or VF) has this number of EQs available. However, the total number of EQs which must be allowed for in the ICM is (1 << log_num_eqs) * (#VFs + #PFs). Rather than compute this quantity, we allocate ICM space for 1024 EQs (which is the device maximum number of EQs, and which is the value we place in the mlx4_phys_caps structure). For INIT_HCA, however, we use the per-function number of EQs as described above. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_intJack Morgenstein1-1/+1
Ths fixes the comparison in the FLR (Function Level Reset) event case. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds32-575/+199
Pull networking changes from David S. Miller: 1) Fix IPSEC header length calculation for transport mode in ESP. The issue is whether to do the calculation before or after alignment. Fix from Benjamin Poirier. 2) Fix regression in IPV6 IPSEC fragment length calculations, from Gao Feng. This is another transport vs tunnel mode issue. 3) Handle AF_UNSPEC connect()s properly in L2TP to avoid OOPSes. Fix from James Chapman. 4) Fix USB ASIX driver's reception of full sized VLAN packets, from Eric Dumazet. 5) Allow drop monitor (and, more generically, all generic netlink protocols) to be automatically loaded as a module. From Neil Horman. Fix up trivial conflict in Documentation/feature-removal-schedule.txt due to new entries added next to each other at the end. As usual. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net/smsc911x: Repair broken failure paths virtio-net: remove useless disable on freeze netdevice: Update netif_dbg for CONFIG_DYNAMIC_DEBUG drop_monitor: Add module alias to enable automatic module loading genetlink: Build a generic netlink family module alias net: add MODULE_ALIAS_NET_PF_PROTO_NAME r6040: Do a Proper deinit at errorpath and also when driver unloads (calling r6040_remove_one) r6040: disable pci device if the subsequent calls (after pci_enable_device) fails skb: avoid unnecessary reallocations in __skb_cow net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens asix: allow full size 8021Q frames to be received rds_rdma: don't assume infiniband device is PCI l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case mac80211: fix ADDBA declined after suspend with wowlan wlcore: fix undefined symbols when CONFIG_PM is not defined mac80211: fix flag check for QoS NOACK frames ath9k_hw: apply internal regulator settings on AR933x ath9k_hw: update AR933x initvals to fix issues with high power devices ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() fails ath9k: stop rx dma before stopping tx ...
2012-05-31net/smsc911x: Repair broken failure pathsLee Jones1-3/+4
Current failure paths attempt to free resources which we failed to request and disable resources which we failed to enable ones. This leads to kernel oops/panic. This patch does some simple re-ordering to prevent this from happening. Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31virtio-net: remove useless disable on freezeMichael S. Tsirkin1-5/+0
disable_cb is just an optimization: it can not guarantee that there are no callbacks. In particular it doesn't have any effect when event index is on. Instead, detach, napi disable and reset on freeze ensure we don't run concurrently with a callback. Remove the useless calls so we get same behaviour with and without event index. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30Merge branch 'master' of ↵John W. Linville25-557/+174
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-05-30r6040: Do a Proper deinit at errorpath and also when driver unloads (calling ↵Devendra Naga1-0/+5
r6040_remove_one) so if mdiobus_alloc fails, the errorpath doesnt do a netif_napi_del and also doesn't set the priv data of the driver to NULL. at the driver unload stage the driver doesn't remove the NAPI context, and doesnt' set the priv data to NULL, and also doesn't call the pci_iounmap. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30r6040: disable pci device if the subsequent calls (after pci_enable_device) ↵Devendra Naga1-4/+6
fails the calls after the pci_enable_device may fail, and will error out with out disabling it. disable the device at error paths. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30net: sh_eth: fix the rxdesc pointer when rx descriptor empty happensYoshihiro Shimoda1-3/+5
When Receive Descriptor Empty happens, rxdesc pointer of the driver and actual next descriptor of the controller may be mismatch. This patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30asix: allow full size 8021Q frames to be receivedEric Dumazet1-1/+2
asix driver drops 8021Q full size frames because it doesn't take into account VLAN header size. Tested on AX88772 adapter. Signed-off-by: Eric Dumazet <edumazet@google.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Allan Chou <allan@asix.com.tw> CC: Trond Wuellner <trond@chromium.org> CC: Grant Grundler <grundler@chromium.org> CC: Paul Stewart <pstew@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29wlcore: fix undefined symbols when CONFIG_PM is not definedEyal Shapira3-1/+7
commit c21eebb50379a96e1335e933583dcd5b455c6b64 "wl12xx: add RX filters ACX commands" breaks the build when CONFIG_PM isn't defined: ERROR: "wl1271_rx_filter_get_fields_size" [drivers/net/wireless/ti/wlcore/wlcore.ko] undefined! ERROR: "wl1271_rx_filter_flatten_fields" [drivers/net/wireless/ti/wlcore/wlcore.ko] undefined! code in drivers/net/wireless/ti/wlcore/acx.c is using these functions unconditionally while they are #ifdefed CONFIG_PM. Fix it by ifdefing all relevant RX filters code with CONFIG_PM. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k_hw: apply internal regulator settings on AR933xFelix Fietkau3-1/+7
On AR933x, the internal regulator settings need to be applied before the PLL init to avoid stability issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k_hw: update AR933x initvals to fix issues with high power devicesFelix Fietkau1-88/+90
"> Can you provide more information about the issues with high power devices? Tx being flakey and Rx not working at all." Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() failsFelix Fietkau1-6/+10
ath_tx_setup_buffer() can fail if there is no ath_buf left, or if mapping DMA failed. In this case it frees the skb passed to it. If ath_tx_setup_buffer is called from ath_tx_form_aggr, the skb is still linked into the tid buffer list and must be dequeued before being released. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath9k: stop rx dma before stopping txFelix Fietkau1-3/+4
It has been found that active Rx can interfere with stopping tx DMA, which could result in at least parts of those "Failed to stop Tx DMA!" messages. Stopping rx before tx should prevent that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29ath5k: add possible wiphy interface combinationsFelix Fietkau1-0/+19
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-23/+54
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-26Merge tag 'cleanup2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc cleanups (part 2) from Olof Johansson: "More cleanups, continuing an earlier set with omap and samsung specific cleanups. These could not go into the first set because they have dependencies on various other series that in turn depend on the first cleanups." Fixed up conflicts in arch/arm/plat-omap/counter_32k.c due to commit bd0493eaaf5c: "move read_{boot,persistent}_clock to the architecture level" that changed how the persistent clocks were handled. And trivial conflicts in arch/arm/mach-omap1/common.h due to just independent changes close to each other. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: SAMSUNG: merge plat-s5p into plat-samsung ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung ARM: SAMSUNG: move platform device for s5p uart into plat-samsung ARM: SAMSUNG: move hr timer for common s5p into plat-samsung ARM: SAMSUNG: move pm part for common s5p into plat-samsung ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung ARM: SAMSUNG: move clock part for common s5p into plat-samsung ARM: S3C24XX: Use common macro to define resources on dev-uart.c ARM: S3C24XX: move common clock init into common.c ARM: S3C24XX: move common power-management code to mach-s3c24xx ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c ARM: S3C24XX: move plat-s3c24xx/cpu.c ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX GPMC: add ECC control definitions ARM: OMAP2+: dmtimer: remove redundant sysconfig context restore ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx ARM: OMAP: AM35xx: remove redunant cpu_is checks for AM3505 ARM: OMAP1: Pass dma request lines in platform data to MMC driver ...
2012-05-25Merge tag 'cris-for-linus' of git://jni.nu/crisLinus Torvalds1-1/+0
Pull CRIS changes from Jesper Nilsson: "No major changes here, but fixes some compile errors for CRIS, some small style issues, some documentation and as a bonus nukes a couple of obsolete rtc-files and related code." * tag 'cris-for-linus' of git://jni.nu/cris: cris: Remove old legacy "-traditional" flag from arch-v10/lib/Makefile CRIS: Remove legacy RTC drivers cris/mm/fault.c: Port OOM changes to do_page_fault cris:fix the wrong function declear CRIS: Add _sdata to vmlinux.lds.S cris: posix_types.h, include asm-generic/posix_types.h CRIS: Update documentation cris/arch-v32: cryptocop: Use kzalloc net:removed the unused variable cris:removed the unused variable CRISv32: Correct name of read_mostly section.
2012-05-25brcmfmac: use vmalloc to allocate mem for the firmwareHauke Mehrtens1-2/+3
The firmware is more than 300KB big and you should not use kmalloc for such big allocations. This allocation with kmalloc failed on my mips based device (BCM47186). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25wl1251: fix oops on early interruptGrazvydas Ignotas2-3/+2
This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25iwlwifi: fix memory leak if opmode fails to initJohannes Berg1-9/+9
If drv->op_mode is NULL after trying to init the opmode, we go to the wrong label. Fix this, and clean up the code a bit. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Guy Cohen <guy.cohen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25iwlwifi: do not send lq cmd when station add failsMeenakshi Venkataraman1-1/+1
When adding a station fails in iwl_restore_stations, the driver treats it like a successful station add and sends a link quality command, when it it shouldn't. This patch fixes one of the potential sources for kernel warnings like this one: WARNING: at drivers/net/wireless/iwlwifi/iwl-agn-sta.c:905 iwl_send_lq_cmd+0x130/0x217 [iwlwifi]() Hardware name: 3323A2G Modules linked in: ... Pid: 17359, comm: kworker/u:2 Tainted: G O 3.3.0-wl+ #1 Call Trace: [<ffffffff81039620>] warn_slowpath_common+0x7e/0x96 [<ffffffff8103964d>] warn_slowpath_null+0x15/0x17 [<ffffffffa02a9f0b>] iwl_send_lq_cmd+0x130/0x217 [iwlwifi] [<ffffffffa02aa1fb>] iwl_restore_stations+0x209/0x289 [iwlwifi] [<ffffffffa02b07c2>] iwlagn_commit_rxon+0x602/0x7bd [iwlwifi] [<ffffffffa02b111f>] iwlagn_bss_info_changed+0x247/0x31a [iwlwifi] [<ffffffffa0861437>] ieee80211_bss_info_change_notify+0x1a5/0x1ba [mac80211] [<ffffffffa088afad>] ieee80211_destroy_auth_data+0x4b/0x70 [mac80211] [<ffffffffa088df26>] ieee80211_sta_work+0xb5/0x954 [mac80211] Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25iwlwifi: remove ucode16 optionJohannes Berg4-426/+0
The ucode16 option is still very much work in progress, so there's no need to ask any users about it. Remove the option and code for now, we'll put it back when it's actually working. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25iwlwifi: do not use shadow registers by defaultMeenakshi Venkataraman2-5/+5
Shadow registers in the device are meant to allow the driver to update certain device registers without needing to wake up all components of the device. However, using this feature in the device causes communication between the driver and the device to become unreliable, resulting in host command timeouts. Disable this feature by default till a fix is available for the bug. Cc: stable@vger.kernel.org #2.6.38+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25iwlwifi: fix the Transmit Frame Descriptor ringsEmmanuel Grumbach3-12/+16
The logic that allows to have a short TFD queue was completely wrong. We do maintain 256 Transmit Frame Descriptors, but they point to recycled buffers. We used to attach and de-attach different TFDs for the same buffer and it worked since they pointed to the same buffer. Also zero the number of BDs after unmapping a TFD. This seems not necessary since we don't reclaim the same TFD twice, but I like housekeeping. This patch solves this warning: [ 6427.079855] WARNING: at lib/dma-debug.c:866 check_unmap+0x727/0x7a0() [ 6427.079859] Hardware name: Latitude E6410 [ 6427.079865] iwlwifi 0000:02:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000296d393c] [size=8 bytes] [ 6427.079870] Modules linked in: ... [ 6427.079950] Pid: 6613, comm: ifconfig Tainted: G O 3.3.3 #5 [ 6427.079954] Call Trace: [ 6427.079963] [<c10337a2>] warn_slowpath_common+0x72/0xa0 [ 6427.079982] [<c1033873>] warn_slowpath_fmt+0x33/0x40 [ 6427.079988] [<c12dcb77>] check_unmap+0x727/0x7a0 [ 6427.079995] [<c12dcdaa>] debug_dma_unmap_page+0x5a/0x80 [ 6427.080024] [<fe2312ac>] iwlagn_unmap_tfd+0x12c/0x180 [iwlwifi] [ 6427.080048] [<fe231349>] iwlagn_txq_free_tfd+0x49/0xb0 [iwlwifi] [ 6427.080071] [<fe228e37>] iwl_tx_queue_unmap+0x67/0x90 [iwlwifi] [ 6427.080095] [<fe22d221>] iwl_trans_pcie_stop_device+0x341/0x7b0 [iwlwifi] [ 6427.080113] [<fe204b0e>] iwl_down+0x17e/0x260 [iwlwifi] [ 6427.080132] [<fe20efec>] iwlagn_mac_stop+0x6c/0xf0 [iwlwifi] [ 6427.080168] [<fd8480ce>] ieee80211_stop_device+0x5e/0x190 [mac80211] [ 6427.080198] [<fd833208>] ieee80211_do_stop+0x288/0x620 [mac80211] [ 6427.080243] [<fd8335b7>] ieee80211_stop+0x17/0x20 [mac80211] [ 6427.080250] [<c148dac1>] __dev_close_many+0x81/0xd0 [ 6427.080270] [<c148db3d>] __dev_close+0x2d/0x50 [ 6427.080276] [<c148d152>] __dev_change_flags+0x82/0x150 [ 6427.080282] [<c148e3e3>] dev_change_flags+0x23/0x60 [ 6427.080289] [<c14f6320>] devinet_ioctl+0x6a0/0x770 [ 6427.080296] [<c14f8705>] inet_ioctl+0x95/0xb0 [ 6427.080304] [<c147a0f0>] sock_ioctl+0x70/0x270 Cc: stable@vger.kernel.org Reported-by: Antonio Quartulli <ordex@autistici.org> Tested-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25iwlwifi: update BT traffic load states correctlyMeenakshi Venkataraman1-0/+1
When BT traffic load changes from its previous state, a new LQ command needs to be sent down to the firmware. This needs to be done only once per change. The state variable that keeps track of this change is last_bt_traffic_load. However, it was not being updated when the change had been handled. Not updating this variable was causing a flood of advanced BT config commands to be sent to the firmware. Fix this. Cc: stable@vger.kernel.org #2.6.38+ Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25xen/netback: Calculate the number of SKB slots required correctlySimon Graham1-2/+1
When calculating the number of slots required for a packet header, the code was reserving too many slots if the header crossed a page boundary. Since netbk_gop_skb copies the header to the start of the page, the count of slots required for the header should be based solely on the header size. This problem is easy to reproduce if a VIF is bridged to a USB 3G modem device as the skb->data value always starts near the end of the first page. Signed-off-by: Simon Graham <simon.graham@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-25net: qmi_wwan: Add Sierra Wireless device IDsBjørn Mork1-0/+2
Some additional Gobi3K IDs found in the BSD/GPL licensed out-of-tree GobiNet driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds92-4501/+3464
Pull more networking updates from David Miller: "Ok, everything from here on out will be bug fixes." 1) One final sync of wireless and bluetooth stuff from John Linville. These changes have all been in his tree for more than a week, and therefore have had the necessary -next exposure. John was just away on a trip and didn't have a change to send the pull request until a day or two ago. 2) Put back some defines in user exposed header file areas that were removed during the tokenring purge. From Stephen Hemminger and Paul Gortmaker. 3) A bug fix for UDP hash table allocation got lost in the pile due to one of those "you got it.. no I've got it.." situations. :-) From Tim Bird. 4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll try to coalesce overlapping frags and crash. Fix from Eric Dumazet. 5) RCU routing table lookups can race with free_fib_info(), causing crashes when we deref the device pointers in the route. Fix by releasing the net device in the RCU callback. From Yanmin Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits) tcp: take care of overlaps in tcp_try_coalesce() ipv4: fix the rcu race between free_fib_info and ip_route_output_slow mm: add a low limit to alloc_large_system_hash ipx: restore token ring define to include/linux/ipx.h if: restore token ring ARP type to header xen: do not disable netfront in dom0 phy/micrel: Fix ID of KSZ9021 mISDN: Add X-Tensions USB ISDN TA XC-525 gianfar:don't add FCB length to hard_header_len Bluetooth: Report proper error number in disconnection Bluetooth: Create flags for bt_sk() Bluetooth: report the right security level in getsockopt Bluetooth: Lock the L2CAP channel when sending Bluetooth: Restore locking semantics when looking up L2CAP channels Bluetooth: Fix a redundant and problematic incoming MTU check Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Bluetooth: Fix EIR data generation for mgmt_device_found Bluetooth: Fix Inquiry with RSSI event mask Bluetooth: improve readability of l2cap_seq_list code Bluetooth: Fix skb length calculation ...
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds10-18/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-23Merge tag 'staging-3.5-rc1' of ↵Linus Torvalds6-6459/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree changes from Greg Kroah-Hartman: "Here is the big staging tree pull request for the 3.5-rc1 merge window. Loads of changes here, and we just narrowly added more lines than we added: 622 files changed, 28356 insertions(+), 26059 deletions(-) But, good news is that there is a number of subsystems that moved out of the staging tree, to their respective "real" portions of the kernel. Code that moved out was: - iio core code - mei driver - vme core and bridge drivers There was one broken network driver that moved into staging as a step before it is removed from the tree (pc300), and there was a few new drivers added to the tree: - new iio drivers - gdm72xx wimax USB driver - ipack subsystem and 2 drivers All of the movements around have acks from the various subsystem maintainers, and all of this has been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up various trivial conflicts, along with a non-trivial one found in -next and pointed out by Olof Johanssen: a clean - but incorrect - merge of the arch/arm/boot/dts/at91sam9g20.dtsi file. Fix up manually as per Stephen Rothwell. * tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits) Staging: bcm: Remove two unused variables from Adapter.h Staging: bcm: Removes the volatile type definition from Adapter.h Staging: bcm: Rename all "INT" to "int" in Adapter.h Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h Staging: bcm: Correctly format all comments in Adapter.h Staging: bcm: Fix all whitespace issues in Adapter.h Staging: bcm: Properly format braces in Adapter.h Staging: ipack/bridges/tpci200: remove unneeded casts Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant Staging: ipack: remove board_name and bus_name fields from struct ipack_device Staging: ipack: improve the register of a bus and a device in the bus. staging: comedi: cleanup all the comedi_driver 'detach' functions staging: comedi: remove all 'default N' in Kconfig staging: line6/config.h: Delete unused header staging: gdm72xx depends on NET staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices staging: drm/omap: initial dmabuf/prime import support staging: drm/omap: dmabuf/prime mmap support pstore/ram: Add ECC support pstore/ram: Switch to persistent_ram routines ...
2012-05-23Merge tag 'tty-3.5-rc1' of ↵Linus Torvalds1-61/+44
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY updates from Greg Kroah-Hartman: "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge window. Nothing major in here, just lots of incremental changes from Alan and Jiri reworking some tty core things to behave better and to get a more solid grasp on some of the nasty tty locking issues. There are a few tty and serial driver updates in here as well. All of this has been in the linux-next releases for a while with no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits) serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller. serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width. serial: bfin_uart: narrow the reboot condition in DMA tx interrupt serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller. Revert "serial_core: Update buffer overrun statistics." tty: hvc_xen: NULL dereference on allocation failure tty: Fix LED error return tty: Allow uart_register/unregister/register tty: move global ldisc idle waitqueue to the individual ldisc serial8250-em: Add DT support serial8250-em: clk_get() IS_ERR() error handling fix serial_core: Update buffer overrun statistics. tty: drop the pty lock during hangup cris: fix missing tty arg in wait_event_interruptible_tty call tty/amiserial: Add missing argument for tty_unlock() tty_lock: Localise the lock pty: Lock the devpts bits privately tty_lock: undo the old tty_lock use on the ctty serial8250-em: Emma Mobile UART driver V2 Add missing call to uart_update_timeout() ...
2012-05-23Merge tag 'usb-3.5-rc1' of ↵Linus Torvalds49-110/+206
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB 3.5-rc1 changes from Greg Kroah-Hartman: "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window. It's touches a lot of different parts of the kernel, all USB drivers, due to some API cleanups (getting rid of the ancient err() macro) and some changes that are needed for USB 3.0 power management updates. There are also lots of new drivers, pimarily gadget, but others as well. We deleted a staging driver, which was nice, and finally dropped the obsolete usbfs code, which will make Al happy to never have to touch that again. There were some build errors in the tree that linux-next found a few days ago, but those were fixed by the most recent changes (all were due to us not building with CONFIG_PM disabled.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits) xhci: Fix DIV_ROUND_UP compile error. xhci: Fix compile with CONFIG_USB_SUSPEND=n USB: Fix core compile with CONFIG_USB_SUSPEND=n brcm80211: Fix compile error for .disable_hub_initiated_lpm. Revert "USB: EHCI: work around bug in the Philips ISP1562 controller" MAINTAINERS: Add myself as maintainer to the USB PHY Layer USB: EHCI: fix command register configuration lost problem USB: Remove races in devio.c USB: ehci-platform: remove update_device USB: Disable hub-initiated LPM for comms devices. xhci: Add Intel U1/U2 timeout policy. xhci: Add infrastructure for host-specific LPM policies. USB: Add macros for interrupt endpoint types. xhci: Reserve one command for USB3 LPM disable. xhci: Some Evaluate Context commands must succeed. USB: Disable USB 3.0 LPM in critical sections. USB: Add support to enable/disable USB3 link states. USB: Allow drivers to disable hub-initiated LPM. USB: Calculate USB 3.0 exit latencies for LPM. USB: Refactor code to set LPM support flag. ... Conflicts: arch/arm/mach-exynos/mach-nuri.c arch/arm/mach-exynos/mach-universal_c210.c drivers/net/wireless/ath/ath6kl/usb.c
2012-05-23xen: do not disable netfront in dom0Marek Marczykowski1-6/+0
Netfront driver can be also useful in dom0, eg when all NICs are assigned to some domU (aka driver domain). Then using netback in domU and netfront in dom0 is the only way to get network access in dom0. Signed-off-by: Marek Marczykowski <marmarek@invisiblethingslab.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-23Merge branch 'master' of ↵David S. Miller90-4494/+3463
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John says: -------------------- I apologize for not having sent this sooner. FWIW, I was in a car somewhere between Illinois and North Carolina for most of the day Sunday and Monday... :-) This is (obviously) the last non-fix pull request for wireless bits intended for 3.5. It includes AP support for mwifiex, a variety of HCI and other updates for NFC, some brcmfmac and brcmsmac refactoring, a large batch of ssb and bcma updates, a batch of ath6kl updates, some cfg80211 and mac80211 updates/refactoring from Johannes Berg, a rather large collection of Bluetooth updates by way of Gustavo, and a variety of other bits here and there. -------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22gianfar:don't add FCB length to hard_header_lenWu Jiajun-B063781-1/+1
FCB(Frame Control Block) isn't the part of netdev hard header. Add FCB to hard_header_len will make GRO fail at MAC comparision stage. Signed-off-by: Jiajun Wu <b06378@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextJohn W. Linville90-4494/+3463
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-0/+15
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 21:25:11 +0300